Nothing depends on lock_flocks using the BKL
any more, so we can do the switch over to
a private spinlock.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

You currently cannot use "fasync_helper()" in an atomic environment to
insert a new fasync entry, because it will need to allocate the new
"struct fasync_struct".

Yet fcntl_setlease() wants to call this under lock_flocks(), which is in
the process of being converted from the BKL to a spinlock.

In order to fix this, this abstracts out the actual fasync list
insertion and the fasync allocations into functions of their own, and
teaches fs/locks.c to pre-allocate the fasync_struct entry.  That way
the actual list insertion can happen while holding the required
spinlock.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bfields@redhat.com: rebase on top of my changes to Arnd's patch]
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

As suggested by Christoph Hellwig, this moves allocation
of new file locks out of generic_setlease into the
callers, nfs4_open_delegation and fcntl_setlease in order
to allow GFP_KERNEL allocations when lock_flocks has
become a spinlock.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: J. Bruce Fields <bfields@redhat.com>

nlmsvc_notify_blocked walks the nlm_blocked list,
which requires nlm_blocked_lock.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

lockd should use lock_flocks() instead of lock_kernel()
to lock against posix locks accessing the i_flock list.

This is a prerequisite to turning lock_flocks into a
spinlock.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: J. Bruce Fields <bfields@redhat.com>

* ima-memory-use-fixes:
  IMA: fix the ToMToU logic
  IMA: explicit IMA i_flag to remove global lock on inode_delete
  IMA: drop refcnt from ima_iint_cache since it isn't needed
  IMA: only allocate iint when needed
  IMA: move read counter into struct inode
  IMA: use i_writecount rather than a private counter
  IMA: use inode->i_lock to protect read and write counters
  IMA: convert internal flags from long to char
  IMA: use unsigned int instead of long for counters
  IMA: drop the inode opencount since it isn't needed for operation
  IMA: use rbtree instead of radix tree for inode information cache

Current logic looks like this:

        rc = ima_must_measure(NULL, inode, MAY_READ, FILE_CHECK);
        if (rc < 0)
                goto out;

        if (mode & FMODE_WRITE) {
                if (inode->i_readcount)
                        send_tomtou = true;
                goto out;
        }

        if (atomic_read(&inode->i_writecount) > 0)
                send_writers = true;

Lets assume we have a policy which states that all files opened for read
by root must be measured.

Lets assume the file has permissions 777.

Lets assume that root has the given file open for read.

Lets assume that a non-root process opens the file write.

The non-root process will get to ima_counts_get() and will check the
ima_must_measure().  Since it is not supposed to measure it will goto
out.

We should check the i_readcount no matter what since we might be causing
a ToMToU voilation!

This is close to correct, but still not quite perfect.  The situation
could have been that root, which was interested in the mesurement opened
and closed the file and another process which is not interested in the
measurement is the one holding the i_readcount ATM.  This is just overly
strict on ToMToU violations, which is better than not strict enough...
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently for every removed inode IMA must take a global lock and search
the IMA rbtree looking for an associated integrity structure.  Instead
we explicitly mark an inode when we add an integrity structure so we
only have to take the global lock and do the removal if it exists.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since finding a struct ima_iint_cache requires a valid struct inode, and
the struct ima_iint_cache is supposed to have the same lifetime as a
struct inode (technically they die together but don't need to be created
at the same time) we don't have to worry about the ima_iint_cache
outliving or dieing before the inode.  So the refcnt isn't useful.  Just
get rid of it and free the structure when the inode is freed.
Signed-off-by: Eric Paris <eapris@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

IMA always allocates an integrity structure to hold information about
every inode, but only needed this structure to track the number of
readers and writers currently accessing a given inode.  Since that
information was moved into struct inode instead of the integrity struct
this patch stops allocating the integrity stucture until it is needed.
Thus greatly reducing memory usage.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

IMA currently allocated an inode integrity structure for every inode in
core.  This stucture is about 120 bytes long.  Most files however
(especially on a system which doesn't make use of IMA) will never need
any of this space.  The problem is that if IMA is enabled we need to
know information about the number of readers and the number of writers
for every inode on the box.  At the moment we collect that information
in the per inode iint structure and waste the rest of the space.  This
patch moves those counters into the struct inode so we can eventually
stop allocating an IMA integrity structure except when absolutely
needed.

This patch does the minimum needed to move the location of the data.
Further cleanups, especially the location of counter updates, may still
be possible.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

IMA tracks the number of struct files which are holding a given inode
readonly and the number which are holding the inode write or r/w.  It
needs this information so when a new reader or writer comes in it can
tell if this new file will be able to invalidate results it already made
about existing files.

aka if a task is holding a struct file open RO, IMA measured the file
and recorded those measurements and then a task opens the file RW IMA
needs to note in the logs that the old measurement may not be correct.
It's called a "Time of Measure Time of Use" (ToMToU) issue.  The same is
true is a RO file is opened to an inode which has an open writer.  We
cannot, with any validity, measure the file in question since it could
be changing.

This patch attempts to use the i_writecount field to track writers.  The
i_writecount field actually embeds more information in it's value than
IMA needs but it should work for our purposes and allow us to shrink the
struct inode even more.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently IMA used the iint->mutex to protect the i_readcount and
i_writecount.  This patch uses the inode->i_lock since we are going to
start using in inode objects and that is the most appropriate lock.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The IMA flags is an unsigned long but there is only 1 flag defined.
Lets save a little space and make it a char.  This packs nicely next to
the array of u8's.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently IMA uses 2 longs in struct inode.  To save space (and as it
seems impossible to overflow 32 bits) we switch these to unsigned int.
The switch to unsigned does require slightly different checks for
underflow, but it isn't complex.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The opencount was used to help debugging to make sure that everything
which created a struct file also correctly made the IMA calls.  Since we
moved all of that into the VFS this isn't as necessary.  We should be
able to get the same amount of debugging out of just the reader and
write count.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The IMA code needs to store the number of tasks which have an open fd
granting permission to write a file even when IMA is not in use.  It
needs this information in order to be enabled at a later point in time
without losing it's integrity garantees.

At the moment that means we store a little bit of data about every inode
in a cache.  We use a radix tree key'd on the inode's memory address.
Dave Chinner pointed out that a radix tree is a terrible data structure
for such a sparse key space.  This patch switches to using an rbtree
which should be more efficient.

Bug report from Dave:

 "I just noticed that slabtop was reporting an awfully high usage of
  radix tree nodes:

   OBJS ACTIVE  USE OBJ SIZE  SLABS OBJ/SLAB CACHE SIZE NAME
  4200331 2778082  66%    0.55K 144839       29   2317424K radix_tree_node
  2321500 2060290  88%    1.00K  72581       32   2322592K xfs_inode
  2235648 2069791  92%    0.12K  69864       32    279456K iint_cache

  That is, 2.7M radix tree nodes are allocated, and the cache itself is
  consuming 2.3GB of RAM.  I know that the XFS inodei caches are indexed
  by radix tree node, but for 2 million cached inodes that would mean a
  density of 1 inode per radix tree node, which for a system with 16M
  inodes in the filsystems is an impossibly low density.  The worst I've
  seen in a production system like kernel.org is about 20-25% density,
  which would mean about 150-200k radix tree nodes for that many inodes.
  So it's not the inode cache.

  So I looked up what the iint_cache was.  It appears to used for
  storing per-inode IMA information, and uses a radix tree for indexing.
  It uses the *address* of the struct inode as the indexing key.  That
  means the key space is extremely sparse - for XFS the struct inode
  addresses are approximately 1000 bytes apart, which means the closest
  the radix tree index keys get is ~1000.  Which means that there is a
  single entry per radix tree leaf node, so the radix tree is using
  roughly 550 bytes for every 120byte structure being cached.  For the
  above example, it's probably wasting close to 1GB of RAM...."
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/battery-2.6:
  power_supply: Makefile cleanup
  bq27x00_battery: Add missing kfree(di->bus) in bq27x00_battery_remove()
  power_supply: Introduce maximum current property
  power_supply: Add types for USB chargers
  ds2782_battery: Fix units
  power_supply: Add driver for TWL4030/TPS65950 BCI charger
  bq20z75: Add support for more power supply properties
  wm831x_power: Add missing kfree(wm831x_power) in wm831x_power_remove()
  jz4740-battery: Add missing kfree(jz_battery) in jz_battery_remove()
  ds2760_battery: Add missing kfree(di) in ds2760_battery_remove()
  olpc_battery: Fix endian neutral breakage for s16 values
  ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependency
  pcf50633-charger: Add missing sysfs_remove_group()
  power_supply: Add driver for TI BQ20Z75 gas gauge IC
  wm831x_power: Remove duplicate chg mask
  omap: rx51: Add support for USB chargers
  power_supply: Add isp1704 charger detection driver

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (34 commits)
  i7core_edac: return -ENODEV when devices were already probed
  i7core_edac: properly terminate pci_dev_table
  i7core_edac: Avoid PCI refcount to reach zero on successive load/reload
  i7core_edac: Fix refcount error at PCI devices
  i7core_edac: it is safe to i7core_unregister_mci() when mci=NULL
  i7core_edac: Fix an oops at i7core probe
  i7core_edac: Remove unused member channels in i7core_pvt
  i7core_edac: Remove unused arg csrow from get_dimm_config
  i7core_edac: Reduce args of i7core_register_mci
  i7core_edac: Introduce i7core_unregister_mci
  i7core_edac: Use saved pointers
  i7core_edac: Check probe counter in i7core_remove
  i7core_edac: Call pci_dev_put() when alloc_i7core_dev()  failed
  i7core_edac: Fix error path of i7core_register_mci
  i7core_edac: Fix order of lines in i7core_register_mci
  i7core_edac: Always do get/put for all devices
  i7core_edac: Introduce i7core_pci_ctl_create/release
  i7core_edac: Introduce free_i7core_dev
  i7core_edac: Introduce alloc_i7core_dev
  i7core_edac: Reduce args of i7core_get_onedevice
  ...

* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (22 commits)
  Add _addr_lsb field to ia64 siginfo
  Fix migration.c compilation on s390
  HWPOISON: Remove retry loop for try_to_unmap
  HWPOISON: Turn addr_valid from bitfield into char
  HWPOISON: Disable DEBUG by default
  HWPOISON: Convert pr_debugs to pr_info
  HWPOISON: Improve comments in memory-failure.c
  x86: HWPOISON: Report correct address granuality for huge hwpoison faults
  Encode huge page size for VM_FAULT_HWPOISON errors
  Fix build error with !CONFIG_MIGRATION
  hugepage: move is_hugepage_on_freelist inside ifdef to avoid warning
  Clean up __page_set_anon_rmap
  HWPOISON, hugetlb: fix unpoison for hugepage
  HWPOISON, hugetlb: soft offlining for hugepage
  HWPOSION, hugetlb: recover from free hugepage error when !MF_COUNT_INCREASED
  hugetlb: move refcounting in hugepage allocation inside hugetlb_lock
  HWPOISON, hugetlb: add free check to dequeue_hwpoison_huge_page()
  hugetlb: hugepage migration core
  hugetlb: redefine hugepage copy functions
  hugetlb: add allocate function for hugepage migration
  ...

* 'for_linus' of git://github.com/at91linux/linux-2.6-at91:
  AT91: rtc: enable built-in RTC in Kconfig for at91sam9g45 family
  at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board
  AT91: pm: make sure that r0 is 0 when dealing with cache operations
  AT91: pm: use plain cpu_do_idle() for "wait for interrupt"
  AT91: reset: extend alternate reset procedure to several chips
  AT91: reset routine cleanup, remove not needed icache flush
  AT91: trivial: align comment of at91sam9g20_reset with one more tab
  AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
  AT91: add board support for Pcontrol_G20

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
  OMAP: DSS2: don't power off a panel twice
  OMAP: DSS2: OMAPFB: Allow usage of def_vrfb only for omap2,3
  OMAP: DSS2: OMAPFB: make VRFB depends on OMAP2,3
  OMAP: DSS2: OMAPFB: Allow FB_OMAP2 to build without VRFB
  arm/omap: simplify conditional
  OMAP: DSS2: DSI: Remove extra iounmap in error path
  OMAP: DSS2: Use dss_features framework on DSS2 code
  OMAP: DSS2: Introduce dss_features files
  video/omap: remove mux.h include
  ARM: omap/fb: move get_fbmem_region() to .init.text
  ARM: omap/fb: move omapfb_reserve_sram to .init.text
  ARM: omap/fb: move omap_init_fb to .init.text
  OMAP: DSS2: OMAPFB: swap front and back porches for both hsync and vsync
  OMAP: DSS2: make filter coefficient tables human readable
  OMAP: DSS2: Add SPI dependency to Kconfig of ACX565AKM panel

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ]: x86, cpufreq: Mark longrun_get_policy with __cpuinit.
  [CPUFREQ] add sampling_down_factor tunable to improve ondemand performance
  [CPUFREQ] arch/x86/kernel/cpu/cpufreq: Fix unsigned return type
  [CPUFREQ] drivers/cpufreq: Adjust confusing if indentation

* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux: (99 commits)
  svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
  svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
  svcrpc: assume svc_delete_xprt() called only once
  svcrpc: never clear XPT_BUSY on dead xprt
  nfsd4: fix connection allocation in sequence()
  nfsd4: only require krb5 principal for NFSv4.0 callbacks
  nfsd4: move minorversion to client
  nfsd4: delay session removal till free_client
  nfsd4: separate callback change and callback probe
  nfsd4: callback program number is per-session
  nfsd4: track backchannel connections
  nfsd4: confirm only on succesful create_session
  nfsd4: make backchannel sequence number per-session
  nfsd4: use client pointer to backchannel session
  nfsd4: move callback setup into session init code
  nfsd4: don't cache seq_misordered replies
  SUNRPC: Properly initialize sock_xprt.srcaddr in all cases
  SUNRPC: Use conventional switch statement when reclassifying sockets
  sunrpc/xprtrdma: clean up workqueue usage
  sunrpc: Turn list_for_each-s into the ..._entry-s
  ...

Fix up trivial conflicts (two different deprecation notices added in
separate branches) in Documentation/feature-removal-schedule.txt

* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  net/sunrpc: Use static const char arrays
  nfs4: fix channel attribute sanity-checks
  NFSv4.1: Use more sensible names for 'initialize_mountpoint'
  NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure
  NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructure
  NFS: client needs to maintain list of inodes with active layouts
  NFS: create and destroy inode's layout cache
  NFSv4.1: pnfs: filelayout: introduce minimal file layout driver
  NFSv4.1: pnfs: full mount/umount infrastructure
  NFS: set layout driver
  NFS: ask for layouttypes during v4 fsinfo call
  NFS: change stateid to be a union
  NFSv4.1: pnfsd, pnfs: protocol level pnfs constants
  SUNRPC: define xdr_decode_opaque_fixed
  NFSD: remove duplicate NFS4_STATEID_SIZE

Enable built-in RTC IP in Kconfig and modify comments and help messages.
RTT as RTC is still available but should not be selected in common case.
Reported-by: Yegor Yefremov <yegor_sub1@visionsystems.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This adds the support of atmel-mci sd/mmc driver in at91sam9g45 devices and
board files. This also configures the DMA controller slave interface for
at_hdmac dmaengine driver.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

When using CP15 cache operations (c7), we make sure that Rd (r0)
is actually 0 as ARM 926 TRM is saying.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

For power management at91_pm_enter() routine, use the cpu_do_idle() for a
rock solid "wait for interrupt" implementation.
For AT91SAM9 ARM 926 based chips, we can exceed the cache line length as
we can access RAM even while in self-refresh mode.
We keep plain access to CP15 for at91rm9200 as this feature is not
available: instructions have to be in a single cache line.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Several at91sam9 chips need the alternate reset procedure to be sure to halt
SDRAM smoothly before resetting the chip.
This is an extension of previous patch "Fix AT91SAM9G20 reset" to all chips
affected.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Generalize assembler reset routine to allow use on several at91sam9 chips.
This patch replace double definitions of SDRAM controller registers and RSTC
registers with use of classical header files.

For this rework, we remove the not needed icache flush as it is already
done in the calling function: arm_machine_restart().

Rename at91sam9g20_reset.S to generalize to several chips.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Preparing next patch with longer names
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

If the SDRAM is not cleanly shutdown before reset it can be left driving
the bus, which then stops the bootloader booting from NAND.
Signed-off-by: Peter Horton <phorton@bitbox.co.uk>
[nicolas.ferre@atmel.com: change file header line order]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Board is a carrier board for Stamp9G20, with additional peripherals
for a building automation system
Signed-off-by: Peter Gsellmann <pgsellmann@portner-elektronik.at>
[nicolas.ferre@atmel.com: remove machine_desc.io_pg_offst and .phys_io]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The sanity checks here are incorrect; in the worst case they allow
values that crash the client.

They're also over-reliant on the preprocessor.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

* 'for-next' of git://android.git.kernel.org/kernel/tegra:
  spi: tegra: fix error setting on timeout
  spi: add spi_tegra driver
  tegra: harmony: enable PCI Express
  tegra: add PCI Express support
  tegra: add PCI Express clocks
  [ARM] tegra: Add APB DMA support
  [ARM] tegra: Add cpufreq support
  [ARM] tegra: common: Update common clock init table
  [ARM] tegra: clock: Add dvfs support, bug fixes, and cleanups
  [ARM] tegra: Add support for reading fuses
  [ARM] tegra: gpio: Add suspend and wake support
  [ARM] tegra: pinmux: add safe values, move tegra2, add suspend
  [ARM] tegra: add suspend and mirror irqs to legacy controller
  [ARM] tegra: Add legacy irq support
  [ARM] tegra: update iomap

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: fix inverted anomaly 05000481 logic
  Blackfin: drop unused irq_panic()/DEBUG_ICACHE_CHECK
  Blackfin: ppi/spi/twi headers: add missing __BFP undef
  Blackfin: update defconfigs
  Blackfin: bfin_twi.h: start a common TWI header
  netdev: bfin_mac: push settings to platform resources

avoids derefencing an uninitialized pointer

Change-Id: Icf528441ae481e9f6f5ddc0be32c7c217fa49701
Signed-off-by: Erik Gilling <konkers@android.com>

* 'next' of git://git.monstr.eu/linux-2.6-microblaze: (42 commits)
  microblaze: Fix build with make 3.82
  fbdev/xilinxfb: Microblaze driver support
  microblaze: Support C optimized lib functions for little-endian
  microblaze: Separate library optimized functions
  microblaze: Support timer on AXI lite
  microblaze: Add support for little-endian Microblaze
  microblaze: KGDB little endian support
  microblaze: Add PVR for endians plus detection
  net: emaclite: Add support for little-endian platforms
  microblaze: trivial: Add comment for AXI pvr
  microblaze: pci-common cleanup
  microblaze: Support early console on uart16550
  microblaze: Do not compile early console support for uartlite if is disabled
  microblaze: Setup early console dynamically
  microblaze: Rename all uartlite early printk functions
  microblaze: remove early printk uarlite console dependency from header
  microblaze: Remove additional compatible properties
  microblaze: Remove hardcoded asm instraction for PVR loading
  microblaze: Use static const char * const where possible
  microblaze: Define VMALLOC_START/END
  ...