- 14 May, 2020 4 commits
-
-
Andrey Grodzovsky authored
Add this for gfx10 and gfx9. v2: Fix identation Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
R-Car Display Unit & related changes: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200514012844.GA7196@pendragon.ideasonboard.com
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.8-2020-05-12: amdgpu: - Misc cleanups - RAS fixes - Expose FP16 for modesetting - DP 1.4 compliance test fixes - Clockgating fixes - MAINTAINERS update - Soft recovery for gfx10 - Runtime PM cleanups - PSP code cleanups amdkfd: - Track GPU memory utilization per process - Report PCI domain in topology Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Driver Changes: - Fix GitLab #1698: Performance regression with Linux 5.7-rc1 on Iris Plus 655 and 4K screen (Chris) - Add Wa_14011059788 for Tigerlake (Matt A) - Add per ctx batchbuffer wa for timestamp for Gen12 (Mika) - Use indirect ctx bb to load cmd buffer control value from context image to avoid corruption (Mika) - Enable DP Display Audio WA (Uma, Jani) - Update forcewake firmware ranges for Icelake (Radhakrishna) - Add missing deinitialization cases of load failure for display (Jose) - Implement TC cold sequences for Icelake and Tigerlake (Jose) - Unbreak enable_dpcd_backlight modparam (Lyude) - Move the late flush_submission in retire to the end (Chris) - Demote "Reducing compressed framebufer size" message to info (Peter) - Push MST link retraining to the hotplug work (Ville) - Hold obj->vma.lock over for_each_ggtt_vma() (Chris) - Fix timeout handling during TypeC AUX power well enabling for ICL (Imre) - Fix skl+ non-scaled pfit modes (Ville) - Prefer soft-rc6 over RPS DOWN_TIMEOUT (Chris) - Sanitize GT first before poisoning HWSP (Chris) - Fix up clock RPS frequency readout (Chris) - Avoid reusing the same logical CCID (Chris) - Avoid dereferencing a dead context (Chris) - Always enable busy-stats for execlists (Chris) - Apply the aggressive downclocking to parking (Chris) - Restore aggressive post-boost downclocking (Chris) - Scrub execlists state on resume (Chris) - Add debugfs attributes for LPSP (Ansuman) - Improvements to kernel selftests (Chris, Mika) - Add tiled blits selftest (Zbigniew) - Fix error handling in __live_lrc_indirect_ctx_bb() (Dan) - Add pre/post plane updates for SAGV (Stanislav) - Add ICL PG3 PW ID for EHL (Anshuman) - Fix Sphinx build duplicate label warning (Jani) - Error log non-zero audio power refcount after unbind (Jani) - Remove object_is_locked assertion from unpin_from_display_plane (Chris) - Use single set of AUX powerwell ops for gen11+ (Matt R) - Prefer drm_WARN_ON over WARN_ON (Pankaj) - Poison residual state [HWSP] across resume (Chris, Tvrtko) - Convert request-before-CS assertion to debug (Chris) - Carefully order virtual_submission_tasklet (Chris) - Check carefully for an idle engine in wait-for-idle (Chris) - Only close vma we open (Chris) - Trace RPS events (Chris) - Use the RPM config register to determine clk frequencies (Chris) - Drop rq->ring->vma peeking from error capture (Chris) - Check preempt-timeout target before submit_ports (Chris) - Check HWSP cacheline is valid before acquiring (Chris) - Use proper fault mask in interrupt postinstall too (Matt R) - Keep a no-frills swappable copy of the default context state (Chris) - Add atomic helpers for bandwidth (Stanislav) - Refactor setting dma info to a common helper from device info (Michael) - Refactor DDI transcoder code for clairty (Ville) - Extend PG3 power well ID to ICL (Anshuman) - Refactor PFIT code for readability and future extensibility (Ville) - Clarify code split between intel_ddi.c and intel_dp.c (Ville) - Move out code to return the digital_port of the aux ch (Jose) - Move rps.enabled/active and use of RPS interrupts to flags (Chris) - Remove superfluous inlines and dead code (Jani) - Re-disable -Wframe-address from top-level Makefile (Nick) - Static checker and spelling fixes (Colin, Nathan) - Split long lines (Ville) Signed-off-by:
-
- 13 May, 2020 7 commits
-
-
Tomohito Esaki authored
According to drm_plane_create_zpos_property() function documentation, all planes zpos range should be set if zpos property is supported. However, the rcar-du driver didn't set primary plane zpos range. Since the primary plane's zpos is fixed, set it immutably. Reported-by:
Yoshihito Ogawa <yoshihito.ogawa.kc@renesas.com> Reported-by:
Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by:
Tomohito Esaki <etom@igel.co.jp> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Daniel Stone <daniels@collabora.com> [Turn continue into if ... else ...] Signed-off-by:
-
Laurent Pinchart authored
The zpos property is used by userspace to sort the order of planes. While the property is not mandatory for drivers to implement, mixing planes with and without zpos confuses userspace, and shall not be allowed. Clarify this in the documentation and warn at runtime if the drivers mixes planes with and without zpos properties. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Laurent Pinchart authored
As the DRM LVDS panel driver uses a different approach to DT bindings compared to what Thierry Reding advocates, add a specific MAINTAINERS entry to avoid bothering Thierry with requests related to that driver. Signed-off-by:
-
Geert Uytterhoeven authored
Document the optional properties for describing module resets, to support resetting display channels on R-Car Gen2 and Gen3. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Convert the Thine THC63LVD1024 text binding to YAML. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
-
Laurent Pinchart authored
The simple-bridge driver supports multiple simple or dumb bridges, covered by different compatible strings but otherwise identical DT bindings. Some of those bridges have undocumented bindings, while others are documented in text form in separate files. Group them all in a single binding and convert it to YAML. The psave-gpios property of the adi,adv7123 is dropped, as it isn't supported by the driver and isn't specified in any DT file upstream. Support for power saving is available through the enable-gpios property that should cover all the needs of the ADV7123 (as the device only has a /PSAVE pin and no enable pin). Signed-off-by:
-
Laurent Pinchart authored
Document the #address-cells and #size-cells properties of the ports node in the schemas of the bridge DT bindings, and set additionalProperties to false to reject additional properties. Signed-off-by:
-
- 11 May, 2020 5 commits
-
-
Jason Yan authored
Fix the following gcc warning: drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c:65:18: warning: ‘crtc_offsets’ defined but not used [-Wunused-const-variable=] static const u32 crtc_offsets[6] = ^~~~~~~~~~~~ Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Leo (Hanghong) Ma authored
[Why] For MST case: when update_config is called to disable a stream, this clears the settings for all the streams on that link. We should only clear the settings for the stream that was disabled. [How] Clear the settings after the call to remove display is called. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by:
-
Tom St Denis authored
Requested bits for UMR support Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Tom St Denis authored
On my raven1 system (rev c6) with VBIOS 113-RAVEN-114 GFXOFF is not stable (resulting in large block tiling noise in some applications). Disabling GFXOFF via the quirk list fixes the problems for me. Signed-off-by:
-
Jane Jian authored
since for sriov, baco happens on host side, no need and meaning to judge is baco. also, since kiq reads strap0 in here, if kiq is not ready or gpu reset(kiq resume) happens after this read, would fail to read and wrongly set baco as true(1). Acked-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Jane Jian <Jane.Jian@amd.com> Signed-off-by:
-
- 08 May, 2020 14 commits
-
-
Alex Deucher authored
We only need to set DPM_FLAG_NEVER_SKIP for the legacy ATPX BOCO case. D3cold and BACO work as expected. Acked-by:
-
Alex Deucher authored
The core handles this for us. Acked-by:
-
Alex Deucher authored
We should be checking whether the driver enabled runtime pm rather than whether the asic supports BOCO or BACO. That said in general they are equivalent unless the user has disabled runpm or it has been disabled for a specific asic. Reviewed-by:
-
Alex Deucher authored
The pci core handles this for us in pci_pm_init. Acked-by:
-
Alex Deucher authored
Same as gfx9. This allows us to kill the waves for hung shaders. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Nirmoy Das authored
Create sysfs file using attributes. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
Evan Quan authored
BACO is needed to support hibernate on Navi1X. Signed-off-by:
-
Hawking Zhang authored
physical_node_id * node_segment_size should be the dram_base_address for current gpu node in xgmi config Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
Hawking Zhang authored
drop IP specific psp function for rlc autoload since the autoload_supported was introduced to mark ASICs that support rlc_autoload Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Hawking Zhang authored
cure posion command was replaced by ras recovery solution and was not a formal command supported by ras ta anymore Signed-off-by:
-
Hawking Zhang authored
TRIGGER_ERROR is common ras ta command for all the ASICs that support RAS feature. switch to common helper to avoid duplicate implementation per IP generation Signed-off-by:
-
Hawking Zhang authored
get_hive_id/get_node_id/get_topology_info/set_topology_info are common xgmi command supported by TA for all the ASICs that support xgmi link. They should be implemented as common helper functions to avoid duplicated code per IP generation Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.8: UAPI Changes: Cross-subsystem Changes: * MAINTAINERS: restore alphabetical order; update cirrus driver * Dcomuentation: document visionix, chronteli, ite vendor prefices; update documentation for Chrontel CH7033, IT6505, IVO, BOE, Panasonic, Chunghwa, AUO bindings; convert dw_mipi_dsi.txt to YAML; remove todo item for drm_display_mode.hsync removal; Core Changes: * drm: add devm_drm_dev_alloc() for managed allocations of drm_device; use DRM_MODESET_LOCK_ALL_*() in mode-object code; remove drm_display_mode.hsync; small cleanups of unused variables, compiler warnings and static functions * drm/client: dual-lincensing: GPL-2.0 or MIT * drm/mm: optimize tree searches in rb_hole_addr() Driver Changes: * drm/{many}: use devm_drm_dev_alloc(); don't use drm_device.dev_private * drm/ast: don't double-assign to drm_crtc_funcs.set_config; drop drm_connector_register() * drm/bochs: drop drm_connector_register() * drm/bridge: add support for Chrontel ch7033; fix stack usage with old gccs; return error pointer in drm_panel_bridge_add() * drm/cirrus: Move to tiny * drm/dp_mst: don't use 2nd sideband tx slot; revert "Remove single tx msg restriction" * drm/lima: support runtime PM; * drm/meson: limit modes wrt chipset * drm/panel: add support for Visionox rm69299; fix clock on boe-tv101wum-n16; fix panel type for AUO G101EVN10; add support for Ivo M133NFW4 R0; add support for BOE NV133FHM-N61; add support for AUO G121EAN01.4, G156XTN01.0, G190EAN01 * drm/pl111: improve vexpress init; fix module auto-loading * drm/stm: read number of endpoints from device tree * drm/vboxvideo: use managed PCI functions; drop DRM_MTRR_WC * drm/vkms: fix use-after-free in vkms_gem_create(); enable cursor support by default * fbdev: use boolean values in several drivers * fbdev/controlfb: fix COMPILE_TEST * fbdev/w100fb: fix double-free bug Signed-off-by: -
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.8-2020-04-30: amdgpu: - SR-IOV fixes - SDMA fix for Navi - VCN 2.5 DPG fixes - Display fixes - Display stuttering fixes for pageflip and cursor - Add support for handling encrypted GPU memory - Add UAPI for encrypted GPU memory - Rework IB pool handling amdkfd: - Expose asic revision in topology - Add UAPI for GWS (Global Wave Sync) resource management UAPI: - Add amdgpu UAPI for encrypted GPU memory Used by: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4401 - Add amdkfd UAPI for GWS (Global Wave Sync) resource management Thunk usage of KFD ioctl: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/blob/roc-2.8.0/src/queues.c#L840 ROCr usage of Thunk API: https://github.com/RadeonOpenCompute/ROCR-Runtime/blob/roc-3.1.0/src/core/runtime/amd_gpu_agent.cpp#L597 HCC code using ROCr API: https://github.com/RadeonOpenCompute/hcc/blob/98ee9f34945d3b5f572d7a4c15cbffa506487734/lib/hsa/mcwamp_hsa.cpp#L2161 HIP code using HCC API: https://github.com/ROCm-Developer-Tools/HIP/blob/cf8589b8c8a40ddcc55fa3a51e23390a49824130/src/hip_module.cpp#L567Signed-off-by:
-
- 07 May, 2020 9 commits
-
-
Chunming Zhou authored
Glad to spend time on kernel driver in past years. I've moved to new focus in umd and couldn't commit enough time to discussions. Reviewed-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
-
Chen Zhou authored
Remove duplicate headers which are included twice. Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c:3216:16-22: Unneeded variable: "result". Return "DC_OK" on line 3229 Signed-off-by:
-
Bernard Zhao authored
There is DEVICE_ATTR mechanism in separate attribute define. So this change is to use attr array, also use sysfs_create_files in init function & sysfs_remove_files in fini function. This maybe make the code a bit readable. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Changes since V1: *Use DEVICE_ATTR mechanism Link for V1: *https://lore.kernel.org/patchwork/patch/1228076/ V2: make array const to fix build errors Reviewed-by:
-
Simon Ser authored
This patch adds a basic cursor check when an atomic test-only commit is performed. The position and size of the cursor plane is checked. This should fix user-space relying on atomic checks to assign buffers to planes. Signed-off-by:
Simon Ser <contact@emersion.fr> Reported-by:
Roman Gilg <subdiff@gmail.com> References: https://github.com/emersion/libliftoff/issues/46 Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] We're sending the drm vblank event a frame too early in the case where the pageflip happens close to VUPDATE and ends up blocking the signal. The implementation in DM was previously correct *before* we started sending vblank events from VSTARTUP unconditionally to handle cases where HUBP was off, OTG was ON and userspace was still requesting some DRM planes enabled. As part of that patch series we dropped VUPDATE since it was deemed close enough to VSTARTUP, but there's a key difference betweeen VSTARTUP and VUPDATE - the VUPDATE signal can be blocked if we're holding the pipe lock. There was a fix recently to revert the unconditional behavior for the DCN VSTARTUP vblank event since it was sending the pageflip event on the wrong frame - once again, due to blocking VUPDATE and having the address start scanning out two frames later. The problem with this fix is it didn't update the logic that calls drm_crtc_handle_vblank(), so the timestamps are totally bogus now. [How] Essentially reverts most of the original VSTARTUP series but retains the behavior to send back events when active planes == 0. Some refactoring/cleanup was done to not have duplicated code in both the handlers. Fixes: 16f17eda ("drm/amd/display: Send vblank and user events at vsartup for DCN") Fixes: 3a2ce8d6 ("drm/amd/display: Disable VUpdate interrupt for DCN hardware") Fixes: 2b5aed9a ("drm/amd/display: Fix pageflip event race condition for DCN.") Signed-off-by:
Leo Li <sunpeng.li@amd.com> Acked-by:
-
John Clements authored
Invoke sequence should abort when ras interrupt is detected before reading TA host shared memory Reviewed-by:
-
Ezequiel Garcia authored
We need to keep the reference to the drm_gem_object until the last access by vkms_dumb_create. Therefore, the put the object after it is used. This fixes a use-after-free issue reported by syzbot. While here, change vkms_gem_create() symbol to static. Reported-and-tested-by: syzbot+e3372a2afe1e7ef04bc7@syzkaller.appspotmail.com Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200427214405.13069-1-ezequiel@collabora.com
-
Melissa Wen authored
This patch proposes a change in the behavior of the cursor to enable it as soon as the vkms module is added. Enabling the cursor by default appears to be an expected and more friendly behavior, especially when running IGT tests. Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Reviewed-by:
-
- 06 May, 2020 1 commit
-
-
ChenTao authored
Fixes warning because size is uint32_t and can never be negtative drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:1296:12: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (size < 0) Reported-by:
ChenTao <chentao107@huawei.com> Signed-off-by:
-
