- 29 Oct, 2019 19 commits
-
-
José Roberto de Souza authored
HDCP could be fused off, so not all GEN9+ platforms will support it. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Reviewed-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191026001323.216052-2-jose.souza@intel.com
-
José Roberto de Souza authored
The next patches are going to touch this registers so here already fixing it for older registers and make it consistent with most of the other registers in this file. Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191026001323.216052-1-jose.souza@intel.com
-
Lionel Landwerlin authored
Gen12 only support a single report format : I915_OA_FORMAT_A32u40_A4u32_B8_C8 Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 00a7f0d7 ("drm/i915/tgl: Add perf support on TGL") Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Matt Roper authored
Our TGL CI platforms are running into cases where aux transactions have failed to complete or declare a timeout well after the timeout limit that the hardware is supposed to enforce. From the logs it appears that these failures arise when aux transactions happen after we've entered DC6: <7> [622.523650] [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [622.523685] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02 ... <3> [622.535753] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout! <3> [622.547745] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout! <3> [622.559746] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout! <3> [622.571744] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout! <3> [622.583743] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp aux hw did not signal timeout! <3> [622.583780] [drm:intel_dp_aux_xfer [i915]] *ERROR* dp_aux_ch not done status 0xad400bff <7> [622.863725] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -110 On TGL AUX B & C are in PG1 (managed by the DMC firmware) rather than PG3 as they were on ICL, so allowing DC6 means the DMC firmware might shut off the power wells behind our backs when we're trying to use them. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191025230623.27829-6-matthew.d.roper@intel.comReviewed-by:
Imre Deak <imre.deak@intel.com>
-
Matt Roper authored
We reference DP AUX registers via the DP_AUX_CH_CTL() and DP_AUX_CH_DATA() macros that calculate all the register offsets for us automatically; there's no need to explicitly define every offset in i915_reg.h if they're never going to be used by the driver code. v2: Apparently GVT was directly using these raw definitions in a couple places. Switch GVT code over to using our preferred macros. Signed-off-by: -
Chris Wilson authored
Execlists uses a scheduling quantum (a timeslice) to alternate execution between ready-to-run contexts of equal priority. This ensures that all users (though only if they of equal importance) have the opportunity to run and prevents livelocks where contexts may have implicit ordering due to userspace semaphores. However, not all workloads necessarily benefit from timeslicing and in the extreme some sysadmin may want to disable or reduce the timeslicing granularity. The timeslicing mechanism can be compiled out^W^W disabled (but should DCE!) with ./scripts/config --set-val DRM_I915_TIMESLICE_DURATION 0 Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191029091632.26281-1-chris@chris-wilson.co.uk
-
Janusz Krzysztofik authored
Commit f2db53f1 ("drm/i915: Replace "_load" with "_probe" consequently") deliberately left the name of the module parameter unchanged as that would require a corresponding change on IGT size. Now as the IGT side change has been submitted, complete the switch to the "probe" nomenclature. Suggested-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Michał Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Janusz Krzysztofik authored
Commit 50d84418 ("drm/i915: Add i915 to i915_inject_probe_failure") introduced new functions unfortunately named incompatibly with rules established by commit f2db53f1 ("drm/i915: Replace "_load" with "_probe" consequently"). Fix it for consistency. Suggested-by:
Michał Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The change from the uapi coordinates to the internal coordinates broke the cursor on i845/i865 due to src and dst getting swapped. Fix it. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 3a612765 ("drm/i915: Remove cursor use of properties for coordinates") Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Lionel Landwerlin authored
The design of the OA unit has been split into several units. We now have a global unit (OAG) and a render specific unit (OAR). This leads to some changes on how we program things. Some details : OAR: - has its own set of counter registers, they are per-context saved/restored - counters are not written to the circular OA buffer - a snapshot of the counters can be acquired with MI_RECORD_PERF_COUNT, or a single counter can be read with MI_STORE_REGISTER_MEM. OAG: - has global counters that increment across context switches - counters are written into the circular OA buffer (if requested) v2: Fix checkpatch warnings on code style (Lucas) v3: (Umesh) - Update register from which tail, status and head are read - Update logic to sample context reports - Update whitelist mux and b counter regs v4: Fix a bug when updating context image for new contexts (Umesh) v5: Squash patch enabling save/restore of counters into context image We want this so we can preempt performance queries and keep the system responsive even when long running queries are ongoing. We avoid doing it for all contexts. - use LRI to modify context control (Chris) - use MASKED_FIELD to program just the masked bits (Chris) - disable save/restore of counters on cleanup (Chris) v6: Do not use implicit parameters (Chris) BSpec: 28727, 30021 Signed-off-by:Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Acked-by:
Chris Wilson <chris.p.wilson@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191025193746.47155-2-umesh.nerlige.ramappa@intel.com
-
Umesh Nerlige Ramappa authored
Add helper macros for range and equality comparisons and use them to check with whitelisted registers in oa configurations. Signed-off-by:
-
Matthew Auld authored
We may be missing support for the mappable aperture on some platforms. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
-
Matthew Auld authored
Since we have no way access it from the CPU. For such cases just fallback to internal objects. Signed-off-by:
-
Michal Wajdeczko authored
HWS placement restrictions can't just rely on HAS_LLC flag. Signed-off-by:
-
Daniele Ceraolo Spurio authored
If the aperture is not available in HW we can't use a ggtt slot and wc copy, so fall back to regular kmap. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
We can't fence anything without aperture. Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
Skip both setup and cleanup of the aperture mapping if the HW doesn't have an aperture bar. Signed-off-by:
-
Daniele Ceraolo Spurio authored
The following patches in the series will use it to avoid certain operations when the mappable aperture is not available in HW. Signed-off-by:
-
Matthew Auld authored
There is nothing to say that the obj->base.size is actually a multiple of the block_size. v2: Use round_up() as block_size is a power-of-two Reported-by:
-
- 28 Oct, 2019 18 commits
-
-
Chris Wilson authored
Currently we insert a arbitration point every 128MiB during a blitter copy. At 8GiB/s, this is around 30ms. This is a little on the large side if we need to inject a high priority work, so reduced it down to 8MiB or roughly 1ms. v2: Don't forget both fill/copy. Signed-off-by:
-
Michal Wajdeczko authored
While processing CSB there is no need to look at GuC submission settings, just check if engine is configured for execlists mode. While today GuC submission is disabled it's settings are still based on modparam values that might not correctly reflect actual submission status in case of any fallback. Until that is fully fixed, use alternate method to confirm that engine really runs in execlists mode by comparing set_default_submission vfunc. v2: add other immediate use of new helper Signed-off-by:
-
Chris Wilson authored
smatch complains about drivers/gpu/drm/i915//display/intel_display.c:14403 intel_set_dp_tp_ctl_normal() error: uninitialized symbol 'conn'. because it has no way to determine that the loop must have an entry. Tell the static analysers to ignore the local, it will always be set. Signed-off-by:
-
Chris Wilson authored
Keep smatch quiet, drivers/gpu/drm/i915//gem/selftests/i915_gem_context.c:1268 __igt_ctx_sseu() error: uninitialized symbol 'ret'. drivers/gpu/drm/i915//gem/selftests/i915_gem_context.c:1280 __igt_ctx_sseu() error: uninitialized symbol 'ret'. Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915//gt/selftest_engine_heartbeat.c:255 live_heartbeat_fast() error: uninitialized symbol 'err'. drivers/gpu/drm/i915//gt/selftest_engine_heartbeat.c:320 live_heartbeat_off() error: uninitialized symbol 'err'. Signed-off-by:
-
Chris Wilson authored
The request's timeline will only contain requests from this context, in order of execution. Therefore, we can simply look back along this timeline to find the currently executing request. If we do find that the current context has completed its last request, that does not imply that all requests are completed in the context, so only advance the ring->head up to the end of the known completions! Signed-off-by:
-
Chris Wilson authored
As we use hard coded offsets for a few locations within the context image, include those in the selftests to assert that they are valid. Signed-off-by:
-
Matt Roper authored
We're currently only processing AUX interrupts on the combo ports; make sure we handle the TC ports as well. v2: Drop stale comment Fixes: f663769a ("drm/i915/tgl: initialize TC and TBT ports") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Chris Wilson authored
Iterate over all user-accessible render engines when checking whether they can be adjusted for sseu. Signed-off-by:
-
Chris Wilson authored
Use any blitter engine at random for prefilling the memory region. Signed-off-by:
-
Chris Wilson authored
Since the rps is tied to its intel_gt, use that backpointer to find the right engine rather than delving into i915. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191027175505.25470-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Select a random user accessible engine for checking coherency results. While we should check all engines, we use a random selection so that over repeated runs we cover all. Signed-off-by:
-
Jani Nikula authored
Add definition for block 56, the compression parameters. v2: add missing slice_height (Vandita) Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191024075608.11511-1-jani.nikula@intel.com
-
Chris Wilson authored
Check all user accessible engines that can blit work with our blitter client. Signed-off-by:
-
Chris Wilson authored
As we are inside the gt, we have a local gt->engine[] lookup we should be using in preference over the i915->engine[] copy. Signed-off-by:
-
Chris Wilson authored
We need to verify that our blitter routines perform as expected, so measure it. Signed-off-by:
-
Ville Syrjälä authored
Add CHICKEN_TRANS definition for transcoder D. Signed-off-by:
-
Ville Syrjälä authored
Make CHICKEN_TRANS() a bit less special looking by using _PICK(). Signed-off-by:
-
- 27 Oct, 2019 2 commits
-
-
Chris Wilson authored
ips uses clock delays as opposed to rps frequency bins. To fit the delays into the same rps calculations, we need to invert the ips delays. Fixes: 3e7abf81 ("drm/i915: Extract GT render power state management") Signed-off-by:
-
Chris Wilson authored
We would like some freedom to break the user API/ABI for future HW but yet still expose the driver for upstream development on that HW. Currently, we have the i915.force_probe module parameter to avoid binding to HW while the driver is under development, but that is still a little too soft with respect to the stringent no-regression rules if we also plan to be redesigning the uAPI to go along with the new HW. To allow the uAPI to be changed during development, only expose that API and in development HW under STAGING (and BROKEN). Hopefully, making it explicit that such interfaces to that HW are under development and not to be blindly enabled by distributions. Signed-off-by:
Dave Airlie <airlied@redhat.com> Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191027154314.11139-1-chris@chris-wilson.co.uk
-
- 26 Oct, 2019 1 commit
-
-
Chris Wilson authored
Pull the memory region bookkeeping into its file. Let's start clean and see how long it lasts! Signed-off-by:
-
