- 02 Mar, 2019 27 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: spectrum_acl: Split rehash work into chunks Jiri says: When rehash happens on a vregion with many rules and they are being migrated, it might take significant time to finish the job. During that time vregion->lock is taken which prevents rules from being added/deleted from the vregion. Aim of this patchset is to allow to interrupt migration of rules during rehash, reschedule and give chance for rules to be added/deleted. Then continue migration in another execution of scheduled work. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The return value is ignored anyway, so just return void. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Store pointer to vchunk where the migration was interrupted, as well as ventry pointer to start from and to stop at (during rollback). This saved pointers need to be forgotten in case of ventries list or vchunk list changes, which is done by couple of "changed" helpers. Signed-off-by:
-
Jiri Pirko authored
Currently, migration of vregions with many entries may take long time during which insertions and removals of the rules are blocked due to wait to acquire vregion->lock. To overcome this, allow to interrupt and continue rehash work according to the set credits - number of rules to migrate. Signed-off-by:
-
Jiri Pirko authored
In order to simplify the code and to prepare it for interrupted/continued migration process, do the rollback in case of migration error as another call to mlxsw_sp_acl_tcam_vchunk_migrate_all(). It can be understood as "migrate all back". Signed-off-by:
-
Jiri Pirko authored
In preparations of interrupt/continue of rehash work, put the code that is done at the beginning/end of vchunk migrate function into separate functions. Signed-off-by:
-
Jiri Pirko authored
Put the this_is_rollback flag into rehash context struct in preparations for interrupt/continue of rehash work. Signed-off-by:
-
Jiri Pirko authored
Remove some of variables in function mlxsw_sp_acl_tcam_ventry_migrate() so the names are aligned with the rest of the code. Signed-off-by:
-
Jiri Pirko authored
Make the vchunk->chunk contain pointer of a new chunk we migrate to. In case of a rollback, it contains the original chunk. Signed-off-by:
-
Jiri Pirko authored
Make the vregion->region contain pointer of a new region we migrate to. In case of a rollback, it contains the original region. Signed-off-by:
-
Jiri Pirko authored
Push code from the beginning and end of function mlxsw_sp_acl_tcam_vregion_migrate() into rehash_start()/end() functions. Then all the things needed to be done before and after the actual migration process will be grouped together. Signed-off-by:
-
Jiri Pirko authored
In preparations for interrupt/continue of rehash work, put the code at the beginning/end of the rehash function into separate functions. Signed-off-by:
-
Jiri Pirko authored
Prepare for continued migration. Introduce a new structure to track rehash context and save hint_priv into it. Signed-off-by:
-
Jiri Pirko authored
Check if the entry is already in a chunk where we want it to be. In that case, skip migration. This is preparation for "per parts" migration where this situation may occur. Signed-off-by:
-
Jiri Pirko authored
More rehash related fields are going to come. Push "dw" into sub-struct that will accommodate the others as well. Signed-off-by:
-
Florian Fainelli authored
There are no more in tree users of the switchdev_trans_item_{dequeue,enqueue} or switchdev_trans_item structure in the kernel since commit 00fc0c51 ("rocker: Change world_ops API and implementation to be switchdev independant"). Remove this unused code and update the documentation accordingly since. Signed-off-by:Florian Fainelli <f.fainelli@gmail.com> Acked-by:
-
David S. Miller authored
Stefan Schmidt says: ==================== doc: net: ieee802154: move from plain text to rst The ieee802154 subsystem doc was still in plain text. With the networking book taking shape I thought it was time to do the first step and move it over to rst. This really is only the minimal conversion. I need to take some time to update and extend the docs. The patches are based on net-next, but they only touch the networking book so I would not expect and trouble. From what I have seen they would go through Jonathan's tree after being acked by Dave? If you want this patches against a different tree let me know. ==================== Signed-off-by: -
Stefan Schmidt authored
The plain text docs are converted to rst now, which allows us to remove the old text file from the tree. Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Stefan Schmidt authored
Moving the ieee802154 docs from a plain text file into the new rst style. This commit only does the minimal needed change to bring the documentation over. Follow up patches will improve and extend on this. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Jakub Kicinski authored
devlink suffers from a few kdoc warnings: net/core/devlink.c:5292: warning: Function parameter or member 'dev' not described in 'devlink_register' net/core/devlink.c:5351: warning: Function parameter or member 'port_index' not described in 'devlink_port_register' net/core/devlink.c:5753: warning: Function parameter or member 'parent_resource_id' not described in 'devlink_resource_register' net/core/devlink.c:5753: warning: Function parameter or member 'size_params' not described in 'devlink_resource_register' net/core/devlink.c:5753: warning: Excess function parameter 'top_hierarchy' description in 'devlink_resource_register' net/core/devlink.c:5753: warning: Excess function parameter 'reload_required' description in 'devlink_resource_register' net/core/devlink.c:5753: warning: Excess function parameter 'parent_reosurce_id' description in 'devlink_resource_register' net/core/devlink.c:6451: warning: Function parameter or member 'region' not described in 'devlink_region_snapshot_create' net/core/devlink.c:6451: warning: Excess function parameter 'devlink_region' description in 'devlink_region_snapshot_create' Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
-
David S. Miller authored
Igor Russkikh says: ==================== net: aquantia: minor bug fixes after static analysis This patchset fixes minor errors and warnings found by smatch and kasan. Extra patch is to replace AQ_HW_WAIT_FOR with readx_poll_timeout to improve readability. V2: use readx_poll resubmitted to net-next since the changeset became quite big. ==================== Signed-off-by: -
Nikita Danilov authored
Replace some direct registers reads with better online functions. Signed-off-by:
Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Nikita Danilov authored
David noticed the original define was hiding 'err' variable reference. Thats confusing and counterintuitive. Andrew noted the whole macro could be replaced with standard readx_poll kernel macro. This makes code more readable. Signed-off-by:
-
Igor Russkikh authored
This is a real stack undercorruption found by kasan build. The issue did no harm normally because it only overflowed 2 bytes after `bitary` array which on most architectures were mapped into `err` local. Fixes: bab6de8f ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by:
-
Nikita Danilov authored
The overflow is detected by smatch: drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c: 175 aq_pci_func_free_irqs() error: buffer overflow 'self->aq_vec' 8 <= 31 In reality msix_entry_mask always restricts number of iterations. Adding extra condition to make logic clear and smatch happy. Signed-off-by:
-
Nikita Danilov authored
drivers/net/ethernet/aquantia/atlantic/aq_nic.c: 991:1: warning: no newline at end of file Signed-off-by:
-
Nikita Danilov authored
Not careful array dereference caused analysis tools to think there could be memory overflow. There was actually no corruption because the array is two dimensional. drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c: 140 aq_ethtool_get_strings() error: memcpy() '*aq_ethtool_stat_names' too small (32 vs 704) Signed-off-by:
-
- 01 Mar, 2019 12 commits
-
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: control processor DMA support and RJ45 This series starts with adding support for reporting twisted pair media type in ethtool. Remaining patches add support for using DMA with the control/service processor. Currently we always copy the command data into card's memory. DMA support allows us to have the NSP read the data from host memory by itself. Unfortunately, the FW loading and flashing cannot directly map the buffers for DMA because (a) the firmware ABI returns const buffers, and (b) the buffers may be vmalloc()ed in many mysterious/unmappable way. So just bite the bullet - allocate new host buffer for the command and copy. As Dirk explains, the NSP now supports updating all FWs at once which means the max flashing time grew significantly. He bumps the max wait to avoid timeouts. ==================== Signed-off-by: -
Dirk van der Merwe authored
The management firmware now supports being passed a bundle with multiple components to be stored in flash at once. This makes it easier to update all components to a known state with a single user command, however, this also has the potential to increase the time required to perform the update significantly. The management firmware only updates the components out of a bundle which are outdated, however, we need to make sure we can handle the absolute worst case where a CPLD update can take a long time to perform. We set a very conservative total timeout of 900s which already adds a contingency. Signed-off-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by:
-
Jakub Kicinski authored
Newer versions of NSP can access host memory. Simplest access type requires all data to be in one contiguous area. Since we don't have the guarantee on where callers of the NSP ABI will allocate their buffers we allocate a bounce buffer and copy the data in and out. Signed-off-by:
-
Jakub Kicinski authored
DMA version of NSP communication is coming, move the code which copies data into the NFP buffer into a separate function. Signed-off-by:
-
Jakub Kicinski authored
NSP expresses the buffer size in MB and 4 kB blocks. For small buffers the kB part may make a difference, so count it in. Signed-off-by:
-
Jakub Kicinski authored
Add support for reporting twisted pair port type. Signed-off-by:
-
Marek Behún authored
The comphy driver for Armada 3700 by Miquèl Raynal (which is currently in linux-next) does not actually set comphy mode when phy_set_mode_ext is called. The mode is set at next call of phy_power_on. Update the driver to semantics similar to mvpp2: helper mvneta_comphy_init sets comphy mode and powers it on. When mode is to be changed in mvneta_mac_config, first power the comphy off, then call mvneta_comphy_init (which sets the mode to new one). Only do this when new mode is different from old mode. This should also work for Armada 38x, since in that comphy driver methods power_on and power_off are unimplemented. Signed-off-by:
Marek Behún <marek.behun@nic.cz> Signed-off-by:
-
David S. Miller authored
Claudiu Manoil says: ==================== enetc: Add mdio support and device tree nodes This is the missing part to enable PCI probing of the ENETC ethernet ports on the LS1028A SoC and external traffic on the LS1028A RDB board. It's one of the first items on the TODO list for the recently merged ENETC ethernet driver. v3: Add DT bindings doc for ENETC connections v4: none ==================== Signed-off-by: -
Claudiu Manoil authored
Define connection bindings (external PHY connections and internal links) for the ENETC on-chip ethernet controllers. Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Claudiu Manoil authored
Each ENETC PF has its own MDIO interface, the corresponding MDIO registers are mapped in the ENETC's Port register block. The current patch adds a driver for these PF level MDIO buses, so that each PF can manage directly its own external link. Signed-off-by:
Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Claudiu Manoil authored
The LS1028A RDB board features an Atheros PHY connected over SGMII to the ENETC PF0 (or Port0). ENETC Port1 (PF1) has no external connection on this board, so it can be disabled for now. Signed-off-by:
-
Claudiu Manoil authored
The LS1028A SoC features a PCI Integrated Endpoint Root Complex (IERC) defining several integrated PCI devices, including the ENETC ethernet controller integrated endpoints (IEPs). The IERC implements ECAM (Enhanced Configuration Access Mechanism) to provide access to the PCIe config space of the IEPs. This means the the IEPs (including ENETC) do not support the standard PCIe BARs, instead the Enhanced Allocation (EA) capability structures in the ECAM space are used to fix the base addresses in the system, and the PCI subsystem uses these structures for device enumeration and discovery. The "ranges" entries contain basic information from these EA capabily structures required by the kernel for device enumeration. The current patch also enables the first 2 ENETC PFs (Physiscal Functions) and the associated VFs (Virtual Functions), 2 VFs for each PF. Each of these ENETC PFs has an external ethernet port on the LS1028A SoC. Signed-off-by:
-
- 28 Feb, 2019 1 commit
-
-
David Ahern authored
'ip' can switch network namespaces internally and then run a given command relative to that namespace without the need to fork and exec another ip instance. Update all references of the form: ip netns exec "$testns" ip ... to ip -netns "$testns" ... Signed-off-by:David Ahern <dsahern@gmail.com> Signed-off-by:
-
