Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Rich Felker <dalias@libc.org>

The mempool_destroy() function tests whether its argument is NULL
and then returns immediately. Thus the test around the calls is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Rich Felker <dalias@libc.org>

Signed-off-by: Rich Felker <dalias@libc.org>

Support is hooked up via a cpu start method specified in the device
tree, and also depends on DT nodes that describe the interfaces for
performing IPI and identifying which cpu execution is taking place on.
The currently used method is a form of spin table, where secondary
cpus are unblocked by writing to a special address.
Signed-off-by: Rich Felker <dalias@libc.org>

The SH2 version of entry.S uses global variables, which need to be
cpu-local in order to work with SMP. For ease of access from asm,
simply use arrays indexed by cpu number, and require the availability
of an address (mmio register or properly setup per-cpu memory) from
which the current cpu's index can be read.
Signed-off-by: Rich Felker <dalias@libc.org>

The version of futex.h in asm-generic should really be adapted to do
the same thing so that this hideous code does not have to be
duplicated per-arch.
Signed-off-by: Rich Felker <dalias@libc.org>

Signed-off-by: Rich Felker <dalias@libc.org>

The J-Core cpu has, as an ISA extension, an atomic compare-and-swap
instruction cas.l which applications need to use (instead the imask or
gusa atomic models, which are fundamentally limited to UP) for
synchronization in order to be compatible with SMP systems. Provide a
hwcap flag so that it's possible to do runtime selection and support
both.
Signed-off-by: Rich Felker <dalias@libc.org>

At the CPU/ISA level, the J2 is compatible with SH-2, and thus the
changes to add J2 support build on existing SH-2 support. However, J2
does not duplicate the memory-mapped SH-2 features like the cache
interface. Instead, the cache interfaces is described in the device
tree, and new code is added to be able to access the flat device tree
at early boot before it is unflattened.

Support is also added for receiving interrupts on trap numbers in the
range 16 to 31, since the J-Core aic1 interrupt controller generates
these traps. This range was unused but nominally for hardware
exceptions on SH-2, and a few values in this range were used for
exceptions on SH-2A, but SH-2A has its own version of the relevant
code.

No individual cpu subtypes are added for J2 since the intent moving
forward is to represent SoCs with device tree rather than as
hard-coded subtypes in the kernel. The CPU_SUBTYPE_J2 Kconfig item
exists only to fit into the existing cpu selection mechanism until it
is overhauled.
Signed-off-by: Rich Felker <dalias@libc.org>

Such a configuration could only be selected by manually selecting
CONFIG_OF; SH_DEVICE_TREE selects both. The affected code is using the
flat DTB at boot time and thus rightfully should depend on
OF_FLATTREE, not just OF.
Signed-off-by: Rich Felker <dalias@libc.org>

There is no arch-specific sched_clock implementation for sh, resulting
in use of the old default jiffies-based implementation. Instead, use
the modern generic sched_clock framework so that drivers can register
better backends.
Signed-off-by: Rich Felker <dalias@libc.org>

The Kconfig for this driver is currently:

config HEARTBEAT
        bool "Heartbeat LED"

....meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rich Felker <dalias@libc.org>

The Kconfig currently controlling compilation of this code is:

config SH_SECUREEDGE5410
        bool "SecureEdge5410"

....meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

We don't replace module.h with init.h since the file already has that.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rich Felker <dalias@libc.org>

The Makefile/Kconfig currently controlling compilation of this code is:

obj-$(CONFIG_DEBUG_FS)          += $(debugfs-y)
debugfs-y                       := asids-debugfs.o

lib/Kconfig.debug:config DEBUG_FS
lib/Kconfig.debug:      bool "Debug Filesystem"

....meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular code, so that when reading the
driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rich Felker <dalias@libc.org>

The Makefile currently controlling compilation of this code is:

obj-y   := debugtraps.o dma-nommu.o dumpstack.o                 \
[...]
           syscalls_$(BITS).o time.o topology.o traps.o         \
           traps_$(BITS).o unwinder.o

....meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular code, so that when reading
the driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Rich Felker <dalias@libc.org>

The futex cmpxchg runtime testing in kernel/futex.c depends on
accesses to address 0 producing EFAULT, which obviously does not work
on nommu. Since SH always has cmpxchg, disable the broken runtime
detection.

At some point this should be fixed at the kernel/futex.c level. UP
machines can always provide a working cmpxchg with interrupt masking,
and SMP cannot function without a working cmpxchg anyway.
Signed-off-by: Rich Felker <dalias@libc.org>

SH3/4 (with MMU) have a virtually indexed cache, requiring explicit
work to avoid consistency problems arising from having the same
physical address range cached in multiple cache lines. This is
unneeded for the NOMMU case, and some of the resulting code paths
(kmap_coherent) don't work. SH2 only avoided this problem by having a
4-way associative cache with way size equal to the page size (4k),
yielding no cache index bits outside of the page offset and thus no
aliases.
Signed-off-by: Rich Felker <dalias@libc.org>

Up until now, the SH version of the sigcontext structure, and thus
mcontext_t/ucontext_t, varied depending on the cpu model the kernel
was built to run on. SH-4 (including SH-4A) and SH-2A used the form
with space for FPU registers, and everything else used a form that
omitted them.

From a userspace perspective, however, the structure layout must be
fixed for a given ABI. Traditionally glibc and uClibc used the form
with space for FPU registers only when __SH4__ (which implies FPU;
__SH4_NOFPU__ is the predefined macro for SH-4 but with no-FPU ABI)
was defined. As a result:

- SH-4 no-FPU programs never matched kernel sigcontext.

- SH-3 programs did not match kernel sigcontext if run on SH-4,
  despite an apparent intent that they be compatible.

- SH-2 and SH-2A programs (using uClibc) did not match kernel
  sigcontext if run on SH-2A.

The mismatch might seem inconsequential because it occurs at the end
of the sigcontext structure, but sigcontext is embedded as uc_mcontext
in ucontext_t, where it is followed by uc_sigmask, an important member
for signal handlers to have access to. In particular, access to
uc_sigmask is necessary for a correct implementation of thread
cancellation.

It would be possible to retain support for both sigcontext ABIs via a
personality mechanism, but since many configurations were already
broken and nobody noticed, and since there are very few if any users
of legacy no-FPU models anymore, I have opted to just remove the
variation and always include space for the FPU registers in
sigcontext. This was proposed and discussed on a thread "SH sigcontext
ABI is broken" cross-posted to linux-sh, libc-alpha, and musl libc
lists in June 2015, and no objections were raised.
Signed-off-by: Rich Felker <dalias@libc.org>

Signed-off-by: Rich Felker <dalias@libc.org>

Correct bitoff in big endian OS.
Current code works correctly for 1 byte but not for 2 bytes.

Fixes: 3226aad8 ("sh: support 1 and 2 byte xchg")
Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rich Felker <dalias@libc.org>

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable bugfixes:
   - nfs: don't create zero-length requests

   - several LAYOUTGET bugfixes

  Features:
   - several performance related features

   - more aggressive caching when we can rely on close-to-open
     cache consistency

   - remove serialisation of O_DIRECT reads and writes

   - optimise several code paths to not flush to disk unnecessarily.

     However allow for the idiosyncracies of pNFS for those layout
     types that need to issue a LAYOUTCOMMIT before the metadata can
     be updated on the server.

   - SUNRPC updates to the client data receive path

   - pNFS/SCSI support RH/Fedora dm-mpath device nodes

   - pNFS files/flexfiles can now use unprivileged ports when
     the generic NFS mount options allow it.

  Bugfixes:
   - Don't use RDMA direct data placement together with data
     integrity or privacy security flavours

   - Remove the RDMA ALLPHYSICAL memory registration mode as
     it has potential security holes.

   - Several layout recall fixes to improve NFSv4.1 protocol
     compliance.

   - Fix an Oops in the pNFS files and flexfiles connection
     setup to the DS

   - Allow retry of operations that used a returned delegation
      stateid

   - Don't mark the inode as revalidated if a LAYOUTCOMMIT is
     outstanding

   - Fix writeback races in nfs4_copy_range() and
     nfs42_proc_deallocate()"

* tag 'nfs-for-4.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (104 commits)
  pNFS: Actively set attributes as invalid if LAYOUTCOMMIT is outstanding
  NFSv4: Clean up lookup of SECINFO_NO_NAME
  NFSv4.2: Fix warning "variable ‘stateids’ set but not used"
  NFSv4: Fix warning "no previous prototype for ‘nfs4_listxattr’"
  SUNRPC: Fix a compiler warning in fs/nfs/clnt.c
  pNFS: Remove redundant smp_mb() from pnfs_init_lseg()
  pNFS: Cleanup - do layout segment initialisation in one place
  pNFS: Remove redundant stateid invalidation
  pNFS: Remove redundant pnfs_mark_layout_returned_if_empty()
  pNFS: Clear the layout metadata if the server changed the layout stateid
  pNFS: Cleanup - don't open code pnfs_mark_layout_stateid_invalid()
  NFS: pnfs_mark_matching_lsegs_return() should match the layout sequence id
  pNFS: Do not set plh_return_seq for non-callback related layoutreturns
  pNFS: Ensure layoutreturn acts as a completion for layout callbacks
  pNFS: Fix CB_LAYOUTRECALL stateid verification
  pNFS: Always update the layout barrier seqid on LAYOUTGET
  pNFS: Always update the layout stateid if NFS_LAYOUT_INVALID_STID is set
  pNFS: Clear the layout return tracking on layout reinitialisation
  pNFS: LAYOUTRETURN should only update the stateid if the layout is valid
  nfs: don't create zero-length requests
  ...

Pull x86 microcode updates from Thomas Gleixner:

 - more work to make the microcode loader robust

 - a fix for the micro code load precedence

 - fixes for initrd loading with randomized memory

 - less printk noise on SMP machines

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm, x86/microcode: Add __PAGE_OFFSET_BASE define on 32-bit
  x86/microcode/intel: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y
  x86/microcode: Remove unused symbol exports
  x86/microcode/intel: Do not issue microcode updates messages on each CPU
  Documentation/microcode: Document some aspects for more clarity
  x86/microcode/AMD: Make amd_ucode_patch[] static
  x86/microcode/intel: Unexport save_mc_for_early()
  x86/microcode/intel: Rename load_microcode_early() to find_microcode_patch()
  x86/microcode: Propagate save_microcode_in_initrd() retval
  x86/microcode: Get rid of find_cpio_data()'s dummy offset arg
  lib/cpio: Make find_cpio_data()'s offset arg optional
  x86/microcode: Fix suspend to RAM with builtin microcode
  x86/microcode: Fix loading precedence

Pull x86 cpufeature updates from Thomas Gleixner:

 - a workaround for the MONITOR instruction erratum of Goldmont CPUs

 - small fixes and cleanups here and there

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add workaround for MONITOR instruction erratum on Goldmont based CPUs
  x86/cpu: Rename "WESTMERE2" family to "NEHALEM_G"
  x86/amd_nb: Clean up init path
  x86/cpufeature: Add helper macro for mask check macros
  x86/cpufeature: Make sure DISABLED/REQUIRED macros are updated
  x86/cpufeature: Update cpufeaure macros

Pull perf fixes from Thomas Gleixner:
 "This update contains:

   - a fix for the bpf tools to use the new EM_BPF code

   - a fix for the module parser of perf to retrieve the
     proper text start address

   - add str_error_c to libapi to avoid linking against
     tools/lib/str_error_r.o"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools lib api: Add str_error_c to libapi
  perf s390: Fix 'start' address of module's map
  tools lib bpf: Use official ELF e_machine value

Pull misc fixes from Thomas Gleixner:
 "This update contains:

   - a fix for stomp-machine so the nmi_watchdog wont trigger on the cpu
     waiting for the others to execute the callback

   - various fixes and updates to objtool including an resync of the
     instruction decoder to match the kernel's decoder"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Un-capitalize "Warning" for out-of-sync instruction decoder
  objtool: Resync x86 instruction decoder with the kernel's
  objtool: Support new GCC 6 switch jump table pattern
  stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE
  objtool: Add 'fixdep' to objtool/.gitignore

Pull DeviceTree updates from Rob Herring:

 - remove most of_platform_populate() calls in arch code.  Now the DT
   core code calls it in the default case and platforms only need to
   call it if they have special needs

 - use pr_fmt on all the DT core print statements

 - CoreSight binding doc improvements to block name descriptions

 - add dt_to_config script which can parse dts files and list
   corresponding kernel config options

 - fix memory leak hit with a PowerMac DT

 - correct a bunch of STMicro compatible strings to use the correct
   vendor prefix

 - fix DA9052 PMIC binding doc to match what is actually used in dts
   files

* tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
  documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
  xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table"
  xtensa: Fix build error due to missing include file
  MIPS: ath79: Add missing include file
  Fix spelling errors in Documentation/devicetree
  ARM: dts: fix STMicroelectronics compatible strings
  powerpc/dts: fix STMicroelectronics compatible strings
  Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
  scripts/dtc: dt_to_config - kernel config options for a devicetree
  of: fdt: mark unflattened tree as detached
  of: overlay: add resolver error prints
  coresight: document binding acronyms
  Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties
  of: use pr_fmt prefix for all console printing
  of/irq: Mark initialised interrupt controllers as populated
  of: fix memory leak related to safe_name()
  Revert "of/platform: export of_default_bus_match_table"
  of: unittest: use of_platform_default_populate() to populate default bus
  memory: omap-gpmc: use of_platform_default_populate() to populate default bus
  bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus
  ...

Pull clk updates from Michael Turquette:
 "The bulk of the changes are updates and fixes to existing clk provider
  drivers, along with a pretty standard number of new drivers.  The core
  recieved a small number of updates as well.

  Core changes of note:
   - removed CLK_IS_ROOT flag

  New clk provider drivers:
   - Renesas r8a7796 clock pulse generator / module standby and
     software reset
   - Allwinner sun8i H3 clock controller unit
   - AmLogic meson8b clock controller (rewritten)
   - AmLogic gxbb clock controller
   - support for some new ICs was added by simple changes to static
     data tables for chips sharing the same family

  Driver updates of note:
   - the Allwinner sunxi clock driver infrastucture was rewritten to
     comform to the state of the art at drivers/clk/sunxi-ng.  The old
     implementation is still supported for backwards compatibility with
     the DT ABI"

* tag 'clk-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
  clk: Makefile: re-sort and clean up
  Revert "clk: gxbb: expose CLKID_MMC_PCLK"
  clk: samsung: Allow modular build of the Audio Subsystem CLKCON driver
  clk: samsung: make clk-s5pv210-audss explicitly non-modular
  clk: exynos5433: remove CLK_IGNORE_UNUSED flag from SPI clocks
  clk: oxnas: Add hardware dependencies
  clk: imx7d: do not set parent of ethernet time/ref clocks
  ARM: dt: sun8i: switch the H3 to the new CCU driver
  clk: sunxi-ng: h3: Fix Kconfig symbol typo
  clk: sunxi-ng: h3: Fix audio clock divider offset
  clk: sunxi-ng: Add H3 clocks
  clk: sunxi-ng: Add N-K-M-P factor clock
  clk: sunxi-ng: Add N-K-M Factor clock
  clk: sunxi-ng: Add N-M-factor clock support
  clk: sunxi-ng: Add N-K-factor clock support
  clk: sunxi-ng: Add M-P factor clock support
  clk: sunxi-ng: Add divider
  clk: sunxi-ng: Add phase clock support
  clk: sunxi-ng: Add mux clock support
  clk: sunxi-ng: Add gate clock support
  ...

Pull audit updates from Paul Moore:
 "Six audit patches for 4.8.

  There are a couple of style and minor whitespace tweaks for the logs,
  as well as a minor fixup to catch errors on user filter rules, however
  the major improvements are a fix to the s390 syscall argument masking
  code (reviewed by the nice s390 folks), some consolidation around the
  exclude filtering (less code, always a win), and a double-fetch fix
  for recording the execve arguments"

* 'stable-4.8' of git://git.infradead.org/users/pcmoore/audit:
  audit: fix a double fetch in audit_log_single_execve_arg()
  audit: fix whitespace in CWD record
  audit: add fields to exclude filter by reusing user filter
  s390: ensure that syscall arguments are properly masked on s390
  audit: fix some horrible switch statement style crimes
  audit: fixup: log on errors from filter user rules

Pull security subsystem updates from James Morris:
 "Highlights:

   - TPM core and driver updates/fixes
   - IPv6 security labeling (CALIPSO)
   - Lots of Apparmor fixes
   - Seccomp: remove 2-phase API, close hole where ptrace can change
     syscall #"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits)
  apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling
  tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family)
  tpm: Factor out common startup code
  tpm: use devm_add_action_or_reset
  tpm2_i2c_nuvoton: add irq validity check
  tpm: read burstcount from TPM_STS in one 32-bit transaction
  tpm: fix byte-order for the value read by tpm2_get_tpm_pt
  tpm_tis_core: convert max timeouts from msec to jiffies
  apparmor: fix arg_size computation for when setprocattr is null terminated
  apparmor: fix oops, validate buffer size in apparmor_setprocattr()
  apparmor: do not expose kernel stack
  apparmor: fix module parameters can be changed after policy is locked
  apparmor: fix oops in profile_unpack() when policy_db is not present
  apparmor: don't check for vmalloc_addr if kvzalloc() failed
  apparmor: add missing id bounds check on dfa verification
  apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
  apparmor: use list_next_entry instead of list_entry_next
  apparmor: fix refcount race when finding a child profile
  apparmor: fix ref count leak when profile sha1 hash is read
  apparmor: check that xindex is in trans_table bounds
  ...

Pull userns vfs updates from Eric Biederman:
 "This tree contains some very long awaited work on generalizing the
  user namespace support for mounting filesystems to include filesystems
  with a backing store.  The real world target is fuse but the goal is
  to update the vfs to allow any filesystem to be supported.  This
  patchset is based on a lot of code review and testing to approach that
  goal.

  While looking at what is needed to support the fuse filesystem it
  became clear that there were things like xattrs for security modules
  that needed special treatment.  That the resolution of those concerns
  would not be fuse specific.  That sorting out these general issues
  made most sense at the generic level, where the right people could be
  drawn into the conversation, and the issues could be solved for
  everyone.

  At a high level what this patchset does a couple of simple things:

   - Add a user namespace owner (s_user_ns) to struct super_block.

   - Teach the vfs to handle filesystem uids and gids not mapping into
     to kuids and kgids and being reported as INVALID_UID and
     INVALID_GID in vfs data structures.

  By assigning a user namespace owner filesystems that are mounted with
  only user namespace privilege can be detected.  This allows security
  modules and the like to know which mounts may not be trusted.  This
  also allows the set of uids and gids that are communicated to the
  filesystem to be capped at the set of kuids and kgids that are in the
  owning user namespace of the filesystem.

  One of the crazier corner casees this handles is the case of inodes
  whose i_uid or i_gid are not mapped into the vfs.  Most of the code
  simply doesn't care but it is easy to confuse the inode writeback path
  so no operation that could cause an inode write-back is permitted for
  such inodes (aka only reads are allowed).

  This set of changes starts out by cleaning up the code paths involved
  in user namespace permirted mounts.  Then when things are clean enough
  adds code that cleanly sets s_user_ns.  Then additional restrictions
  are added that are possible now that the filesystem superblock
  contains owner information.

  These changes should not affect anyone in practice, but there are some
  parts of these restrictions that are changes in behavior.

   - Andy's restriction on suid executables that does not honor the
     suid bit when the path is from another mount namespace (think
     /proc/[pid]/fd/) or when the filesystem was mounted by a less
     privileged user.

   - The replacement of the user namespace implicit setting of MNT_NODEV
     with implicitly setting SB_I_NODEV on the filesystem superblock
     instead.

     Using SB_I_NODEV is a stronger form that happens to make this state
     user invisible.  The user visibility can be managed but it caused
     problems when it was introduced from applications reasonably
     expecting mount flags to be what they were set to.

  There is a little bit of work remaining before it is safe to support
  mounting filesystems with backing store in user namespaces, beyond
  what is in this set of changes.

   - Verifying the mounter has permission to read/write the block device
     during mount.

   - Teaching the integrity modules IMA and EVM to handle filesystems
     mounted with only user namespace root and to reduce trust in their
     security xattrs accordingly.

   - Capturing the mounters credentials and using that for permission
     checks in d_automount and the like.  (Given that overlayfs already
     does this, and we need the work in d_automount it make sense to
     generalize this case).

  Furthermore there are a few changes that are on the wishlist:

   - Get all filesystems supporting posix acls using the generic posix
     acls so that posix_acl_fix_xattr_from_user and
     posix_acl_fix_xattr_to_user may be removed.  [Maintainability]

   - Reducing the permission checks in places such as remount to allow
     the superblock owner to perform them.

   - Allowing the superblock owner to chown files with unmapped uids and
     gids to something that is mapped so the files may be treated
     normally.

  I am not considering even obvious relaxations of permission checks
  until it is clear there are no more corner cases that need to be
  locked down and handled generically.

  Many thanks to Seth Forshee who kept this code alive, and putting up
  with me rewriting substantial portions of what he did to handle more
  corner cases, and for his diligent testing and reviewing of my
  changes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (30 commits)
  fs: Call d_automount with the filesystems creds
  fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns
  evm: Translate user/group ids relative to s_user_ns when computing HMAC
  dquot: For now explicitly don't support filesystems outside of init_user_ns
  quota: Handle quota data stored in s_user_ns in quota_setxquota
  quota: Ensure qids map to the filesystem
  vfs: Don't create inodes with a uid or gid unknown to the vfs
  vfs: Don't modify inodes with a uid or gid unknown to the vfs
  cred: Reject inodes with invalid ids in set_create_file_as()
  fs: Check for invalid i_uid in may_follow_link()
  vfs: Verify acls are valid within superblock's s_user_ns.
  userns: Handle -1 in k[ug]id_has_mapping when !CONFIG_USER_NS
  fs: Refuse uid/gid changes which don't map into s_user_ns
  selinux: Add support for unprivileged mounts from user namespaces
  Smack: Handle labels consistently in untrusted mounts
  Smack: Add support for unprivileged mounts from user namespaces
  fs: Treat foreign mounts as nosuid
  fs: Limit file caps to the user namespace of the super block
  userns: Remove the now unnecessary FS_USERNS_DEV_MOUNT flag
  userns: Remove implicit MNT_NODEV fragility.
  ...

Buck and LDO binding name changes.

The binding names for the regulators have been changed to match the current
expectation from existing device tree source files.

This fix rectifies the disparity between what currently exists in some
.dts[i] board files and what is listed in this binding document. This
change re-aligns those differences and also brings the binding document
in-line with the expectations of the product datasheet from Dialog
Semiconductor.

Bucks and LDOs now follow the expected notation:
{ buck1, buck2, buck3, buck4 }
{ ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10 }
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull power management fix from Rafael Wysocki:
 "Fix a nasty (and really hard to debug) memory corruption during resume
  from hibernation on x86-64 (that leads to a kernel panic most of the
  time) due to the use of a stale stack pointer value in FRAME_BEGIN
  (Josh Poimboeuf)"

* tag 'pm-urgent-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  x86/power/64: Fix hibernation return address corruption

Pull more cgroup updates from Tejun Heo:
 "I forgot to include the patches which got applied to for-4.7-fixes
  late during last cycle.

  Eric's three patches fix bugs introduced with the namespace support"

* 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroupns: Only allow creation of hierarchies in the initial cgroup namespace
  cgroupns: Close race between cgroup_post_fork and copy_cgroup_ns
  cgroupns: Fix the locking in copy_cgroup_ns

Pull smp hotplug updates from Thomas Gleixner:
 "This is the next part of the hotplug rework.

   - Convert all notifiers with a priority assigned

   - Convert all CPU_STARTING/DYING notifiers

     The final removal of the STARTING/DYING infrastructure will happen
     when the merge window closes.

  Another 700 hundred line of unpenetrable maze gone :)"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  timers/core: Correct callback order during CPU hot plug
  leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
  powerpc/numa: Convert to hotplug state machine
  arm/perf: Fix hotplug state machine conversion
  irqchip/armada: Avoid unused function warnings
  ARC/time: Convert to hotplug state machine
  clocksource/atlas7: Convert to hotplug state machine
  clocksource/armada-370-xp: Convert to hotplug state machine
  clocksource/exynos_mct: Convert to hotplug state machine
  clocksource/arm_global_timer: Convert to hotplug state machine
  rcu: Convert rcutree to hotplug state machine
  KVM/arm/arm64/vgic-new: Convert to hotplug state machine
  smp/cfd: Convert core to hotplug state machine
  x86/x2apic: Convert to CPU hotplug state machine
  profile: Convert to hotplug state machine
  timers/core: Convert to hotplug state machine
  hrtimer: Convert to hotplug state machine
  x86/tboot: Convert to hotplug state machine
  arm64/armv8 deprecated: Convert to hotplug state machine
  hwtracing/coresight-etm4x: Convert to hotplug state machine
  ...

Pull IDE updates from David Miller:
 "Just a couple small bug fixes, nothing overly exciting in here"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: missing break statement in set_timings_mdma()
  ide: hpt366: fix incorrect mask when checking at cmd_high_time
  ide-tape: fix misprint in failure handling in idetape_init()
  cmd640: add __init attribute

Pull sparc updates from David Miller:

 1) Double spin lock bug in sunhv serial driver, from Dan Carpenter.

 2) Use correct RSS estimate when determining whether to grow the huge
    TSB or not, from Mike Kravetz.

 3) Don't use full three level page tables for hugepages, PMD level is
    sufficient.  From Nitin Gupta.

 4) Mask out extraneous bits from TSB_TAG_ACCESS register, we only want
    the address bits.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Trim page tables for 8M hugepages
  sparc64 mm: Fix base TSB sizing when hugetlb pages are used
  sparc: serial: sunhv: fix a double lock bug
  sparc32: off by ones in BUG_ON()
  sparc: Don't leak context bits into thread->fault_address

Pull ARC updates from Vineet Gupta:
 "Things have been calm here - nothing much except for a few fixes"

* tag 'arc-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: mm: don't loose PTE_SPECIAL in pte_modify()
  ARC: dma: fix address translation in arc_dma_free
  ARC: typo fix in mm/ioremap.c
  ARC: fix linux-next build breakage

* pm-sleep:
  x86/power/64: Fix hibernation return address corruption

Pull AVR32 updates from Hans-Christian Noren Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: off by one in at32_init_pio()
  avr32: fixup code style in unistd.h and syscall_table.S
  avr32: wire up preadv2 and pwritev2 syscalls

Pull ARM updates from Russell King:
 "Included in this update are:

   - Patches from Gregory Clement to fix the coherent DMA cases in our
     dma-mapping code.

   - A number of CPU errata updates and fixes.

   - ARM cpuidle improvements from Jisheng Zhang.

   - Fix from Kees for the location of _etext.

   - Cleanups from Masahiro Yamada to avoid duplicated messages during
     the kernel build, and remove CONFIG_ARCH_HAS_BARRIERS.

   - Remove a udelay loop limitation, allowing for faster CPUs to
     calibrate the delay correctly.

   - Cleanup some left-overs from the SW PAN implementation.

   - Ensure that a modified address limit is not visible to exception
     handlers"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (21 commits)
  ARM: 8586/1: cpuidle: make arm_cpuidle_suspend() a bit more efficient
  ARM: 8585/1: cpuidle: fix !cpuidle_ops[cpu].init case during init
  ARM: 8561/4: dma-mapping: Fix the coherent case when iommu is used
  ARM: 8561/3: dma-mapping: Don't use outer_flush_range when the L2C is coherent
  ARM: 8560/1: errata: Workaround errata A12 825619 / A17 852421
  ARM: 8559/1: errata: Workaround erratum A12 821420
  ARM: 8558/1: errata: Workaround errata A12 818325/852422 A17 852423
  ARM: save and reset the address limit when entering an exception
  ARM: 8577/1: Fix Cortex-A15 798181 errata initialization
  ARM: 8584/1: floppy: avoid gcc-6 warning
  ARM: 8583/1: mm: fix location of _etext
  ARM: 8582/1: remove unused CONFIG_ARCH_HAS_BARRIERS
  ARM: 8306/1: loop_udelay: remove bogomips value limitation
  ARM: 8581/1: add missing <asm/prom.h> to arch/arm/kernel/devtree.c
  ARM: 8576/1: avoid duplicating "Kernel: arch/arm/boot/*Image is ready"
  ARM: 8556/1: on a generic DT system: do not touch l2x0
  ARM: uaccess: remove put_user() code duplication
  ARM: 8580/1: Remove orphaned __addr_ok() definition
  ARM: get rid of horrible *(unsigned int *)(regs + 1)
  ARM: introduce svc_pt_regs structure
  ...