- 27 May, 2020 6 commits
-
-
Paolo Bonzini authored
Merge AMD fixes before doing more development work.
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Cleanups for 5.8 - vsie (nesting) cleanups - remove unneeded semicolon
-
Paolo Bonzini authored
We can simply look at bits 52-53 to identify MMIO entries in KVM's page tables. Therefore, there is no need to pass a mask to kvm_mmu_set_mmio_spte_mask. Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
Maxim Levitsky authored
This msr is only available when the host supports WAITPKG feature. This breaks a nested guest, if the L1 hypervisor is set to ignore unknown msrs, because the only other safety check that the kernel does is that it attempts to read the msr and rejects it if it gets an exception. Cc: stable@vger.kernel.org Fixes: 6e3ba4ab ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL") Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200523161455.3940-3-mlevitsk@redhat.com> Reviewed-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Maxim Levitsky authored
Even though we might not allow the guest to use WAITPKG's new instructions, we should tell KVM that the feature is supported by the host CPU. Note that vmx_waitpkg_supported checks that WAITPKG _can_ be set in secondary execution controls as specified by VMX capability MSR, rather that we actually enable it for a guest. Cc: stable@vger.kernel.org Fixes: e69e72fa ("KVM: x86: Add support for user wait instructions") Suggested-by:
-
Sean Christopherson authored
Set the mmio_value to '0' instead of simply clearing the present bit to squash a benign warning in kvm_mmu_set_mmio_spte_mask() that complains about the mmio_value overlapping the lower GFN mask on systems with 52 bits of PA space. Opportunistically clean up the code and comments. Cc: stable@vger.kernel.org Fixes: d43e2675 ("KVM: x86: only do L1TF workaround on affected processors") Signed-off-by:
-
- 20 May, 2020 2 commits
-
-
Paolo Bonzini authored
Merge tag 'noinstr-x86-kvm-2020-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into HEAD
-
Paolo Bonzini authored
rcuwait_active only returns whether w->task is not NULL. This is exactly one of the usecases that are mentioned in the documentation for rcu_access_pointer() where it is correct to bypass lockdep checks. This avoids a splat from kvm_vcpu_on_spin(). Reported-by:
Wanpeng Li <kernellwp@gmail.com> Tested-by:
Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
- 19 May, 2020 8 commits
-
-
Thomas Gleixner authored
The async page fault injection into kernel space creates more problems than it solves. The host has absolutely no knowledge about the state of the guest if the fault happens in CPL0. The only restriction for the host is interrupt disabled state. If interrupts are enabled in the guest then the exception can hit arbitrary code. The HALT based wait in non-preemotible code is a hacky replacement for a proper hypercall. For the ongoing work to restrict instrumentation and make the RCU idle interaction well defined the required extra work for supporting async pagefault in CPL0 is just not justified and creates complexity for a dubious benefit. The CPL3 injection is well defined and does not cause any issues as it is more or less the same as a regular page fault from CPL3. Suggested-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Alexandre Chartre <alexandre.chartre@oracle.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200505134059.369802541@linutronix.de
-
Thomas Gleixner authored
While working on the entry consolidation I stumbled over the KVM async page fault handler and kvm_async_pf_task_wait() in particular. It took me a while to realize that the randomly sprinkled around rcu_irq_enter()/exit() invocations are just cargo cult programming. Several patches "fixed" RCU splats by curing the symptoms without noticing that the code is flawed from a design perspective. The main problem is that this async injection is not based on a proper handshake mechanism and only respects the minimal requirement, i.e. the guest is not in a state where it has interrupts disabled. Aside of that the actual code is a convoluted one fits it all swiss army knife. It is invoked from different places with different RCU constraints: 1) Host side: vcpu_enter_guest() kvm_x86_ops->handle_exit() kvm_handle_page_fault() kvm_async_pf_task_wait() The invocation happens from fully preemptible context. 2) Guest side: The async page fault interrupted: a) user space b) preemptible kernel code which is not in a RCU read side critical section c) non-preemtible kernel code or a RCU read side critical section or kernel code with CONFIG_PREEMPTION=n which allows not to differentiate between #2b and #2c. RCU is watching for: #1 The vCPU exited and current is definitely not the idle task #2a The #PF entry code on the guest went through enter_from_user_mode() which reactivates RCU #2b There is no preemptible, interrupts enabled code in the kernel which can run with RCU looking away. (The idle task is always non preemptible). I.e. all schedulable states (#1, #2a, #2b) do not need any of this RCU voodoo at all. In #2c RCU is eventually not watching, but as that state cannot schedule anyway there is no point to worry about it so it has to invoke rcu_irq_enter() before running that code. This can be optimized, but this will be done as an extra step in course of the entry code consolidation work. So the proper solution for this is to: - Split kvm_async_pf_task_wait() into schedule and halt based waiting interfaces which share the enqueueing code. - Add comments (condensed form of this changelog) to spare others the time waste and pain of reverse engineering all of this with the help of uncomprehensible changelogs and code history. - Invoke kvm_async_pf_task_wait_schedule() from kvm_handle_page_fault(), user mode and schedulable kernel side async page faults (#1, #2a, #2b) - Invoke kvm_async_pf_task_wait_halt() for the non schedulable kernel case (#2c). For this case also remove the rcu_irq_exit()/enter() pair around the halt as it is just a pointless exercise: - vCPUs can VMEXIT at any random point and can be scheduled out for an arbitrary amount of time by the host and this is not any different except that it voluntary triggers the exit via halt. - The interrupted context could have RCU watching already. So the rcu_irq_exit() before the halt is not gaining anything aside of confusing the reader. Claiming that this might prevent RCU stalls is just an illusion. Signed-off-by: -
Andy Lutomirski authored
KVM overloads #PF to indicate two types of not-actually-page-fault events. Right now, the KVM guest code intercepts them by modifying the IDT and hooking the #PF vector. This makes the already fragile fault code even harder to understand, and it also pollutes call traces with async_page_fault and do_async_page_fault for normal page faults. Clean it up by moving the logic into do_page_fault() using a static branch. This gets rid of the platform trap_init override mechanism completely. [ tglx: Fixed up 32bit, removed error code from the async functions and massaged coding style ] Signed-off-by:
-
Thomas Gleixner authored
Force inlining of the helpers and mark the instrumentable parts accordingly. Signed-off-by:
-
Peter Zijlstra authored
Force inlining and prevent instrumentation of all sorts by marking the functions which are invoked from low level entry code with 'noinstr'. Split the irqflags tracking into two parts. One which does the heavy lifting while RCU is watching and the final one which can be invoked after RCU is turned off. Signed-off-by:
-
Thomas Gleixner authored
trace_hardirqs_on/off() is only partially safe vs. RCU idle. The tracer core itself is safe, but the resulting tracepoints can be utilized by e.g. BPF which is unsafe. Provide variants which do not contain the lockdep invocation so the lockdep and tracer invocations can be split at the call site and placed properly. This is required because lockdep needs to be aware of the state before switching away from RCU idle and after switching to RCU idle because these transitions can take locks. As these code pathes are going to be non-instrumentable the tracer can be invoked after RCU is turned on and before the switch to RCU idle. So for these new variants there is no need to invoke the rcuidle aware tracer functions. Name them so they match the lockdep counterparts. Signed-off-by:
-
Thomas Gleixner authored
Some code pathes, especially the low level entry code, must be protected against instrumentation for various reasons: - Low level entry code can be a fragile beast, especially on x86. - With NO_HZ_FULL RCU state needs to be established before using it. Having a dedicated section for such code allows to validate with tooling that no unsafe functions are invoked. Add the .noinstr.text section and the noinstr attribute to mark functions. noinstr implies notrace. Kprobes will gain a section check later. Provide also a set of markers: instrumentation_begin()/end() These are used to mark code inside a noinstr function which calls into regular instrumentable text section as safe. The instrumentation markers are only active when CONFIG_DEBUG_ENTRY is enabled as the end marker emits a NOP to prevent the compiler from merging the annotation points. This means the objtool verification requires a kernel compiled with this option. Signed-off-by:
-
Paolo Bonzini authored
KVM stores the gfn in MMIO SPTEs as a caching optimization. These are split in two parts, as in "[high 11111 low]", to thwart any attempt to use these bits in an L1TF attack. This works as long as there are 5 free bits between MAXPHYADDR and bit 50 (inclusive), leaving bit 51 free so that the MMIO access triggers a reserved-bit-set page fault. The bit positions however were computed wrongly for AMD processors that have encryption support. In this case, x86_phys_bits is reduced (for example from 48 to 43, to account for the C bit at position 47 and four bits used internally to store the SEV ASID and other stuff) while x86_cache_bits in would remain set to 48, and _all_ bits between the reduced MAXPHYADDR and bit 51 are set. Then low_phys_bits would also cover some of the bits that are set in the shadow_mmio_value, terribly confusing the gfn caching mechanism. To fix this, avoid splitting gfns as long as the processor does not have the L1TF bug (which includes all AMD processors). When there is no splitting, low_phys_bits can be set to the reduced MAXPHYADDR removing the overlap. This fixes "npt=0" operation on EPYC processors. Thanks to Maxim Levitsky for bisecting this bug. Cc: stable@vger.kernel.org Fixes: 52918ed5 ("KVM: SVM: Override default MMIO mask if memory encryption is enabled") Signed-off-by:
-
- 15 May, 2020 24 commits
-
-
Jim Mattson authored
Bank_num is a one-based count of banks, not a zero-based index. It overflows the allocated space only when strictly greater than KVM_MAX_MCE_BANKS. Fixes: a9e38c3e ("KVM: x86: Catch potential overrun in MCE setup") Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Message-Id: <20200511225616.19557-1-jmattson@google.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
This topic branch will be included in both kvm/master and kvm/next (for 5.8) in order to simplify testing of kvm/next.
-
David Matlack authored
Two new stats for exposing halt-polling cpu usage: halt_poll_success_ns halt_poll_fail_ns Thus sum of these 2 stats is the total cpu time spent polling. "success" means the VCPU polled until a virtual interrupt was delivered. "fail" means the VCPU had to schedule out (either because the maximum poll time was reached or it needed to yield the CPU). To avoid touching every arch's kvm_vcpu_stat struct, only update and export halt-polling cpu usage stats if we're on x86. Exporting cpu usage as a u64 and in nanoseconds means we will overflow at ~500 years, which seems reasonably large. Signed-off-by:
David Matlack <dmatlack@google.com> Signed-off-by:
Jon Cargille <jcargill@google.com> Reviewed-by:
-
Jim Mattson authored
The hrtimer used to emulate the VMX-preemption timer must be pinned to the same logical processor as the vCPU thread to be interrupted if we want to have any hope of adhering to the architectural specification of the VMX-preemption timer. Even with this change, the emulated VMX-preemption timer VM-exit occasionally arrives too late. Signed-off-by:
Oliver Upton <oupton@google.com> Message-Id: <20200508203643.85477-4-jmattson@google.com> Signed-off-by:
-
Jim Mattson authored
Prepare for migration of this hrtimer, by changing it from relative to absolute. (I couldn't get migration to work with a relative timer.) Signed-off-by:
-
Jim Mattson authored
The PINNED bit is ignored by hrtimer_init. It is only considered when starting the timer. When the hrtimer isn't pinned to the same logical processor as the vCPU thread to be interrupted, the emulated VMX-preemption timer often fails to adhere to the architectural specification. Fixes: f15a75ee ("KVM: nVMX: make emulated nested preemption timer pinned") Signed-off-by:
-
Sean Christopherson authored
Remove a 'struct kvm_x86_ops' param that got left behind when the nested ops were moved to their own struct. Fixes: 33b22172 ("KVM: x86: move nested-related kvm_x86_ops to a separate struct") Signed-off-by:
-
Suravee Suthikulpanit authored
This has already been handled in the prior call to svm_clear_vintr(). Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <1588771076-73790-5-git-send-email-suravee.suthikulpanit@amd.com> Signed-off-by:
-
Suravee Suthikulpanit authored
Code clean up and remove unnecessary intercept check for INTERCEPT_VINTR. Signed-off-by:
-
Wanpeng Li authored
This patch implements a fastpath for the preemption timer vmexit. The vmexit can be handled quickly so it can be performed with interrupts off and going back directly to the guest. Testing on SKX Server. cyclictest in guest(w/o mwait exposed, adaptive advance lapic timer is default -1): 5540.5ns -> 4602ns 17% kvm-unit-test/vmexit.flat: w/o avanced timer: tscdeadline_immed: 3028.5 -> 2494.75 17.6% tscdeadline: 5765.7 -> 5285 8.3% w/ adaptive advance timer default -1: tscdeadline_immed: 3123.75 -> 2583 17.3% tscdeadline: 4663.75 -> 4537 2.7% Tested-by:
Haiwei Li <lihaiwei@tencent.com> Cc: Haiwei Li <lihaiwei@tencent.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1588055009-12677-8-git-send-email-wanpengli@tencent.com> Signed-off-by:
-
Wanpeng Li authored
This patch implements a fast path for emulation of writes to the TSCDEADLINE MSR. Besides shortcutting various housekeeping tasks in the vCPU loop, the fast path can also deliver the timer interrupt directly without going through KVM_REQ_PENDING_TIMER because it runs in vCPU context. Tested-by:
-
Paolo Bonzini authored
Replace the ad hoc test in vmx_set_hv_timer with a test in the caller, start_hv_timer. This test is not Intel-specific and would be duplicated when introducing the fast path for the TSC deadline MSR. Signed-off-by: -
Wanpeng Li authored
While optimizing posted-interrupt delivery especially for the timer fastpath scenario, I measured kvm_x86_ops.deliver_posted_interrupt() to introduce substantial latency because the processor has to perform all vmentry tasks, ack the posted interrupt notification vector, read the posted-interrupt descriptor etc. This is not only slow, it is also unnecessary when delivering an interrupt to the current CPU (as is the case for the LAPIC timer) because PIR->IRR and IRR->RVI synchronization is already performed on vmentry Therefore skip kvm_vcpu_trigger_posted_interrupt in this case, and instead do vmx_sync_pir_to_irr() on the EXIT_FASTPATH_REENTER_GUEST fastpath as well. Tested-by:
-
Wanpeng Li authored
Adds a fastpath_t typedef since enum lines are a bit long, and replace EXIT_FASTPATH_SKIP_EMUL_INS with two new exit_fastpath_completion enum values. - EXIT_FASTPATH_EXIT_HANDLED kvm will still go through it's full run loop, but it would skip invoking the exit handler. - EXIT_FASTPATH_REENTER_GUEST complete fastpath, guest can be re-entered without invoking the exit handler or going back to vcpu_run Tested-by: -
Wanpeng Li authored
Introduce kvm_vcpu_exit_request() helper, we need to check some conditions before enter guest again immediately, we skip invoking the exit handler and go through full run loop if complete fastpath but there is stuff preventing we enter guest again immediately. Tested-by:
-
Sean Christopherson authored
Use __print_flags() to display the names of VMX flags in VM-Exit traces and strip the flags when printing the basic exit reason, e.g. so that a failed VM-Entry due to invalid guest state gets recorded as "INVALID_STATE FAILED_VMENTRY" instead of "0x80000021". Opportunstically fix misaligned variables in the kvm_exit and kvm_nested_vmexit_inject tracepoints. Reviewed-by:
-
Wanpeng Li authored
Introduce generic fastpath handler to handle MSR fastpath, VMX-preemption timer fastpath etc; move it after vmx_complete_interrupts() in order to catch events delivered to the guest, and abort the fast path in later patches. While at it, move the kvm_exit tracepoint so that it is printed for fastpath vmexits as well. There is no observed performance effect for the IPI fastpath after this patch. Tested-by:
-
Sean Christopherson authored
Don't propagate GUEST_SYSENTER_* from vmcs02 to vmcs12 on nested VM-Exit as the vmcs12 fields are updated in vmx_set_msr(), and writes to the corresponding MSRs are always intercepted by KVM when running L2. Dropping the propagation was intended to be done in the same commit that added vmcs12 writes in vmx_set_msr()[1], but for reasons unknown was only shuffled around[2][3]. [1] https://patchwork.kernel.org/patch/10933215 [2] https://patchwork.kernel.org/patch/10933215/#22682289 [3] https://lore.kernel.org/patchwork/patch/1088643Signed-off-by:
-
Sean Christopherson authored
Explicitly truncate the data written to vmcs.SYSENTER_EIP/ESP on WRMSR if the virtual CPU doesn't support 64-bit mode. The SYSENTER address fields in the VMCS are natural width, i.e. bits 63:32 are dropped if the CPU doesn't support Intel 64 architectures. This behavior is visible to the guest after a VM-Exit/VM-Exit roundtrip, e.g. if the guest sets bits 63:32 in the actual MSR. Signed-off-by:
-
Uros Bizjak authored
Improve handle_external_interrupt_irqoff inline assembly in several ways: - remove unneeded %c operand modifiers and "$" prefixes - use %rsp instead of _ASM_SP, since we are in CONFIG_X86_64 part - use $-16 immediate to align %rsp - remove unneeded use of __ASM_SIZE macro - define "ss" named operand only for X86_64 The patch introduces no functional changes. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Message-Id: <20200504155706.2516956-1-ubizjak@gmail.com> Signed-off-by:
-
Peter Xu authored
0x4b564d00 and 0x4b564d01 belong to KVM_FEATURE_CLOCKSOURCE2. Signed-off-by:
Peter Xu <peterx@redhat.com> Message-Id: <20200416155913.267562-1-peterx@redhat.com> Signed-off-by:
-
Peter Xu authored
The index returned by kvm_async_pf_gfn_slot() will be removed when an async pf gfn is going to be removed. However kvm_async_pf_gfn_slot() is not reliable in that it can return the last key it loops over even if the gfn is not found in the async gfn array. It should never happen, but it's still better to sanity check against that to make sure no unexpected gfn will be removed. Signed-off-by:
-
Peter Xu authored
hva_to_pfn_remapped() calls fixup_user_fault(), which has already handled the retry gracefully. Even if "unlocked" is set to true, it means that we've got a VM_FAULT_RETRY inside fixup_user_fault(), however the page fault has already retried and we should have the pfn set correctly. No need to do that again. Signed-off-by:
-
Peter Xu authored
Forcing the ASYNC_PF_PER_VCPU to be power of two is much easier to be used rather than calling roundup_pow_of_two() from time to time. Do this by adding a BUILD_BUG_ON() inside the hash function. Another point is that generally async pf does not allow concurrency over ASYNC_PF_PER_VCPU after all (see kvm_setup_async_pf()), so it does not make much sense either to have it not a power of two or some of the entries will definitely be wasted. Signed-off-by:
-
