- 03 Sep, 2020 3 commits
-
-
David S. Miller authored
Paul Barker says: ==================== Minor improvements to b53 dmesg output These changes were made while debugging the b53 driver for use on a custom board. They've been runtime tested on a patched 4.14.y kernel which supports this board as well as build tested with 5.9-rc3. The changes are straightforward enough that I think this testing is sufficient but let me know if further testing is required. Unfortunately I don't have a board to hand which boots with a more recent kernel and has a switch supported by the b53 driver. I'd still like to upstream these patches if possible though. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Paul Barker authored
This allows us to differentiate between the possible failure modes of b53_switch_reset() by looking at the dmesg output. Signed-off-by:
Paul Barker <pbarker@konsulko.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Paul Barker authored
This change allows us to see which device the err or info messages are referring to if we have multiple b53 compatible devices on a board. As this removes the only pr_*() calls in this file we can drop the definition of pr_fmt(). Signed-off-by:
-
- 02 Sep, 2020 11 commits
-
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: struct cleanups This patchset has a few changes for better cacheline use, to cleanup a page handling API, and to streamline the Adminq/Notifyq queue handling. Lastly, we also have a couple of fixes pointed out by the friendly kernel test robot. v2: dropped change to irq coalesce default fixed Neel's attributions to Co-developed-by dropped the unnecessary new call to dma_sync_single_for_cpu() added 2 patches from kernel test robot results ==================== Signed-off-by: -
Shannon Nelson authored
Add parenthesis to clarify a boolean usage. Pointed out in https://lore.kernel.org/lkml/202008060413.VgrMuqLJ%25lkp@intel.com/Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Remove a vestigial variable. Pointed out in https://lore.kernel.org/lkml/20200806143735.GA9232@xsang-OptiPlex-9020/Reported-by:
-
Shannon Nelson authored
The only thing calling ionic_napi any more is the adminq processing, so combine and simplify. Co-developed-by:
Neel Patel <neel@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Remove some unnecessary struct fields and related code. Co-developed-by:
-
Shannon Nelson authored
Move a few active struct fields to the front of the struct for a little better cache use and performance. Signed-off-by:
-
Shannon Nelson authored
The internal page handling can be cleaned up by passing our local page struct rather than dma addresses, and by putting more of the mgmt code into the alloc and free routines. Co-developed-by:
-
David S. Miller authored
Linus Walleij says: ==================== RTL8366 stabilization This stabilizes the RTL8366 driver by checking validity of the passed VLANs and refactoring the member config (MC) code so we do not require strict call order and de-duplicate some code. Changes from v1: incorporate review comments on patch 2. Changes from v2: a oneline bug fix in patch 2. ==================== Signed-off-by: -
Linus Walleij authored
The VLANs and PVIDs on the RTL8366 utilizes a "member configuration" (MC) which is largely unexplained in the code. This set-up requires a special ordering: rtl8366_set_pvid() must be called first, followed by rtl8366_set_vlan(), else the MC will not be properly allocated. Relax this by factoring out the code obtaining an MC and reuse the helper in both rtl8366_set_pvid() and rtl8366_set_vlan() so we remove this strict ordering requirement. In the process, add some better comments and debug prints so people who read the code understand what is going on. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
The rtl8366_set_vlan() and rtl8366_set_pvid() get invalid VLANs tossed at it, especially VLAN0, something the hardware and driver cannot handle. Check validity and bail out like we do in the other callbacks. Reviewed-by:
-
Davide Caratti authored
in mptcp_connect, 's' selects IPPROTO_MPTCP / IPPROTO_TCP as the value of 'protocol' in socket(), and 'm' switches between different send / receive modes. Fix die_usage(): swap 'm' and 's' and add missing 'sendfile' mode. Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
- 01 Sep, 2020 17 commits
-
-
Sunil Goutham authored
Defines UDP segmentation algorithm in hardware and supports offloading UDP segmentation. Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
-
Andrew Lunn authored
When building on platforms without device tree, e.g. amd64, W=1 gives a warning about mv88e6xxx_mdio_external_match being unused. Replace of_match_node() with of_device_is_compatible() to prevent this warning. Suggested-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: add a dpaa2_eth_ prefix to all functions This is just a quick cleanup that aims at adding a dpaa2_eth_ prefix to all functions within the dpaa2-eth driver even if those are static and private to the driver. The main reason for doing this is that looking a perf top, for example, is becoming an inconvenience because one cannot easily determine which entries are dpaa2-eth related or not. ==================== Signed-off-by: -
Ioana Ciornei authored
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by:
-
Ioana Ciornei authored
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by:
-
Eelco Chaudron authored
If nf_conncount_init fails currently the dispatched work is not canceled, causing problems when the timer fires. This change fixes this by not scheduling the work until all initialization is successful. Fixes: a65878d6 ("net: openvswitch: fixes potential deadlock in dp cleanup code") Reported-by:
Eelco Chaudron <echaudro@redhat.com> Reviewed-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
-
Thomas Falcon authored
In some cases, the device or firmware may be busy when the driver attempts to perform the CRQ initialization handshake. If the partner is busy, the hypervisor will return the H_CLOSED return code. The aim of this patch is that, if the device is not ready, to query the device a number of times, with a small wait time in between queries. If all initialization requests fail, the driver will remain in a dormant state, awaiting a signal from the device that it is ready for operation. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-09-01 The following pull-request contains BPF updates for your *net-next* tree. There are two small conflicts when pulling, resolve as follows: 1) Merge conflict in tools/lib/bpf/libbpf.c between 88a82120 ("libbpf: Factor out common ELF operations and improve logging") in bpf-next and 1e891e51 ("libbpf: Fix map index used in error message") in net-next. Resolve by taking the hunk in bpf-next: [...] scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx); data = elf_sec_data(obj, scn); if (!scn || !data) { pr_warn("elf: failed to get %s map definitions for %s\n", MAPS_ELF_SEC, obj->path); return -EINVAL; } [...] 2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between 9647c57b ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for better performance") in bpf-next and e20f0dbf ("net/mlx5e: RX, Add a prefetch command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like: [...] xdp_set_data_meta_invalid(xdp); xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool); net_prefetch(xdp->data); [...] We've added 133 non-merge commits during the last 14 day(s) which contain a total of 246 files changed, 13832 insertions(+), 3105 deletions(-). The main changes are: 1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper for tracing to reliably access user memory, from Alexei Starovoitov. 2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau. 3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa. 4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson. 5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko. 6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh. 7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer. 8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song. 9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant. 10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee. 11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua. 12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski. 13) Various smaller cleanups and improvements all over the place. ==================== Signed-off-by:
-
YueHaibing authored
Remove unneeded return value cast. This is detected by coccinelle. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Remove dma_alloc_coherent return value cast. This is detected by coccinelle. Signed-off-by:
-
Yutaro Hayakawa authored
Implement the getsockopt SOL_TLS TLS_RX which is currently missing. The primary usecase is to use it in conjunction with TCP_REPAIR to checkpoint/restore the TLS record layer state. TLS connection state usually exists on the user space library. So basically we can easily extract it from there, but when the TLS connections are delegated to the kTLS, it is not the case. We need to have a way to extract the TLS state from the kernel for both of TX and RX side. The new TLS_RX getsockopt copies the crypto_info to user in the same way as TLS_TX does. We have described use cases in our research work in Netdev 0x14 Transport Workshop [1]. Also, there is an TLS implementation called tlse [2] which supports TLS connection migration. They have support of kTLS and their code shows that they are expecting the future support of this option. [1] https://speakerdeck.com/yutarohayakawa/prism-proxies-without-the-pain [2] https://github.com/eduardsui/tlseSigned-off-by:
Yutaro Hayakawa <yhayakawa3720@gmail.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
David S. Miller authored
Tonghao Zhang says: ==================== net: openvswitch: improve the codes This series patches are not bug fix, just improve codes. ==================== Signed-off-by: -
Tonghao Zhang authored
keep_flows was introduced by [1], which used as flag to delete flows or not. When rehashing or expanding the table instance, we will not flush the flows. Now don't use it anymore, remove it. [1] - https://github.com/openvswitch/ovs/commit/acd051f1761569205827dc9b037e15568a8d59f8 Cc: Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Tonghao Zhang authored
Decrease table->count and ufid_count unconditionally, because we only don't use count or ufid_count to count when flushing the flows. To simplify the codes, we remove the "count" argument of table_instance_flow_free. To avoid a bug when deleting flows in the future, add WARN_ON in flush flows function. Cc: Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Tonghao Zhang authored
Not change the logic, just improve the coding style. Cc: Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Björn Töpel authored
The functions bq_enqueue(), bq_flush_to_queue(), and bq_xmit_all() in {cpu,dev}map.c always return zero. Changing the return type from int to void makes the code easier to follow. Suggested-by:David Ahern <dsahern@gmail.com> Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200901083928.6199-1-bjorn.topel@gmail.com
-
- 31 Aug, 2020 9 commits
-
-
Alexei Starovoitov authored
Technically the bpf programs can sleep while attached to bpf_lsm_file_mprotect, but such programs need to access user memory. So they're in might_fault() category. Which means they cannot be called from file_mprotect lsm hook that takes write lock on mm->mmap_lock. Adjust the test accordingly. Also add might_fault() to __bpf_prog_enter_sleepable() to catch such deadlocks early. Fixes: 1e6c62a8 ("bpf: Introduce sleepable BPF programs") Fixes: e68a1445 ("selftests/bpf: Add sleepable tests") Reported-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Weqaar Janjua authored
The txpush program in the xdpsock sample application is supposed to send out all packets in the umem in a round-robin fashion. The problem is that it only cycled through the first BATCH_SIZE worth of packets. Fixed this so that it cycles through all buffers in the umem as intended. Fixes: 248c7f9c ("samples/bpf: convert xdpsock to use libbpf for AF_XDP access") Signed-off-by:
Weqaar Janjua <weqaar.a.janjua@intel.com> Signed-off-by:
-
Magnus Karlsson authored
Optimize the throughput performance of the l2fwd sub-app in the xdpsock sample application by removing a duplicate syscall and increasing the size of the fill ring. The latter needs some further explanation. We recommend that you set the fill ring size >= HW RX ring size + AF_XDP RX ring size. Make sure you fill up the fill ring with buffers at regular intervals, and you will with this setting avoid allocation failures in the driver. These are usually quite expensive since drivers have not been written to assume that allocation failures are common. For regular sockets, kernel allocated memory is used that only runs out in OOM situations that should be rare. These two performance optimizations together lead to a 6% percent improvement for the l2fwd app on my machine. Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
-
Miaohe Lin authored
The arg exact_dif is not used anymore, remove it. inet_exact_dif_match() is no longer needed after the above is removed, so remove it too. Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Miaohe Lin authored
The arg exact_dif is not used anymore, remove it. inet6_exact_dif_match() is no longer needed after the above is removed, remove it too. Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== net: phy: add Lynx PCS MDIO module Add support for the Lynx PCS as a separate module in drivers/net/phy/. The advantage of this structure is that multiple ethernet or switch drivers used on NXP hardware (ENETC, Seville, Felix DSA switch etc) can share the same implementation of PCS configuration and runtime management. The module implements phylink_pcs_ops and exports a phylink_pcs (incorporated into a lynx_pcs) which can be directly passed to phylink through phylink_pcs_set. The first 3 patches add some missing pieces in phylink and the locked mdiobus write accessor. Next, the Lynx PCS MDIO module is added as a standalone module. The majority of the code is extracted from the Felix DSA driver. The last patch makes the necessary changes in the Felix and Seville drivers in order to use the new common PCS implementation. At the moment, USXGMII (only with in-band AN), SGMII, QSGMII (with and without in-band AN) and 2500Base-X (only w/o in-band AN) are supported by the Lynx PCS MDIO module since these were also supported by Felix and no functional change is intended at this time. Changes in v2: * got rid of the mdio_lynx_pcs structure and directly exported the functions without the need of an indirection * made the necessary adjustments for this in the Felix DSA driver * solved the broken allmodconfig build test by making the module tristate instead of bool * fixed a memory leakage in the Felix driver (the pcs structure was allocated twice) Changes in v3: * added support for PHYLINK PCS ops in DSA (patch 5/9) * cleanup in Felix PHYLINK operations and migrate to phylink_mac_link_up() being the callback of choice for applying MAC configuration (patches 6-8) Changes in v4: * use the newly introduced phylink PCS mechanism * install the phylink_pcs in the phylink_mac_config DSA ops * remove the direct implementations of the PCS ops * do no use the SGMII_ prefix when referring to the IF_MORE register * add a phylink helper to decode the USXGMII code word * remove cleanup patches for Felix (these have been already accepted) * Seville (recently introduced) now has PCS support through the same Lynx PCS module Changes in v5: - move the pcs-lynx driver to drivers/net/pcs - reword the commit message a bit in 4/5 - add error checking and error propagation in 4/5 - s/IF_MODE_DUPLEX/IF_MODE_HALF_DUPLEX in 4/5 ==================== Signed-off-by: -
Ioana Ciornei authored
Use the helper functions introduced by the newly added Lynx PCS MDIO module in the Felix VSC9959 and Seville VSC9953. Instead of representing the PCS as a phy_device, a mdio_device structure will be passed to the Lynx module which is now actually implementing all the PCS configuration and status reporting. All code previously used for PCS monitoring and runtime configuration is removed and replaced will calls to the Lynx PCS operations. Tested on the following SERDES protocols of LS1028A: 0x7777 (2500Base-X), 0x85bb (QSGMII), 0x9999 (SGMII) and 0x13bb (USXGMII). Signed-off-by:
-
Ioana Ciornei authored
Add a Lynx PCS module which exposes the necessary operations to drive the PCS using phylink. The majority of the code is extracted from the Felix DSA driver, which will be also modified in a later patch, and exposed as a separate module for code reusability purposes. As such, this aims at feature and bug parity with the existing Felix DSA driver, and thus USXGMII, SGMII, QSGMII and 2500Base-X (only w/o in-band AN) are supported by the Lynx PCS module since these were also supported by Felix. The module can only be enabled by the drivers in need and not user selectable. Signed-off-by:
-
Ioana Ciornei authored
Add the locked variant of the clause 45 mdiobus write accessor - mdiobus_c45_write(). Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
