- 14 Oct, 2008 40 commits
-
-
Bjorn Helgaas authored
Most if not all x86 platforms have an RTC device, but sometimes the RTC is not exposed as a PNP0b00/PNP0b01/PNP0b02 device in PNPBIOS or ACPI: http://bugzilla.kernel.org/show_bug.cgi?id=11580 https://bugzilla.redhat.com/show_bug.cgi?id=451188 It's best if we can discover the RTC via PNP because then we know which flavor of device it is, where it lives, and which IRQ it uses. But if we can't, we should register a platform device using the compiled-in RTC_PORT/RTC_IRQ resource assumptions. Signed-off-by:Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Reported-by:
Rik Theys <rik.theys@esat.kuleuven.be> Reported-by: shr_msn@yahoo.com.tw Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Bjorn Helgaas authored
Move rtc_wake_setup() from drivers/acpi/glue.c into the RTC driver in drivers/rtc/rtc-cmos.c. This removes the ordering constraint between the module_init(acpi_rtc_init) and the cmos_do_probe() code that depends on it. Signed-off-by:
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: (59 commits) svcrdma: Fix IRD/ORD polarity svcrdma: Update svc_rdma_send_error to use DMA LKEY svcrdma: Modify the RPC reply path to use FRMR when available svcrdma: Modify the RPC recv path to use FRMR when available svcrdma: Add support to svc_rdma_send to handle chained WR svcrdma: Modify post recv path to use local dma key svcrdma: Add a service to register a Fast Reg MR with the device svcrdma: Query device for Fast Reg support during connection setup svcrdma: Add FRMR get/put services NLM: Remove unused argument from svc_addsock() function NLM: Remove "proto" argument from lockd_up() NLM: Always start both UDP and TCP listeners lockd: Remove unused fields in the nlm_reboot structure lockd: Add helper to sanity check incoming NOTIFY requests lockd: change nlmclnt_grant() to take a "struct sockaddr *" lockd: Adjust nlmsvc_lookup_host() to accomodate AF_INET6 addresses lockd: Adjust nlmclnt_lookup_host() signature to accomodate non-AF_INET lockd: Support non-AF_INET addresses in nlm_lookup_host() NLM: Convert nlm_lookup_host() to use a single argument svcrdma: Add Fast Reg MR Data Types ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (26 commits) mfd: Fix warning in WM8350 mfd: Add placeholders for WM8350 client devices da903x: add regulator support for DA9030/DA9034 mfd: Add WM8350 subdevice registration helper regulator: Add WM8350 regulator support mfd: Add WM8350 interrupt support mfd: Add initialisation callback for WM8350 mfd: Add GPIO pin configuration support for WM8350 mfd: Add I2C control support for WM8350 mfd: Core support for the WM8350 AudioPlus PMIC mfd: Add WM8350 watchdog register definitions mfd: Add WM8350 RTC register definitions mfd: Add WM8350 comparator register definitions mfd: Add WM8350 PMU register definitions mfd: Add WM8350 PMIC register definitions mfd: Add WM8350 GPIO register definitions mfd: Add WM8350 audio register definitions regulator: Export regulator name via sysfs regulator: Add WM8400 regulator support mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMU ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-fastbootLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-fastboot: raid, fastboot: hide RAID autodetect option if MD is compiled as a module raid: make RAID autodetect default a KConfig option warning: fix init do_mounts_md c fastboot: make the RAID autostart code print a message just before waiting fastboot: make the raid autodetect code wait for all devices to init fastboot: Fix bootgraph.pl initcall name regexp fastboot: fix issues and improve output of bootgraph.pl Add a script to visualize the kernel boot process / time
-
Linus Torvalds authored
This reverts commit c9e587ab, and the subsequent commits that fixed it up: - afa9b649 "fbcon: prevent cursor disappearance after switching to 512 character font" - d850a2fa "vt/fbcon: fix background color on line feed" - 7fe3915a "vt/fbcon: update scrl_erase_char after 256/512-glyph font switch" by request of Alan Cox. Quoth Alan: "Unfortunately it's wrong and its been causing breakages because various apps like ncurses expect our previous (and correct) behaviour." Alexander sent out a similar patch. Requested-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Tested-by:
Jan Engelhardt <jengelh@medozas.de> Cc: Alexander V. Lukyanov <lav@netis.ru> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: qlge: Fix page size ifdef test. net: Rationalise email address: Network Specific Parts dsa: fix compile bug on s390 netns: mib6 section fixlet enic: Fix Kconfig headline description de2104x: wrong MAC address fix s390: claw compile fixlet net: export genphy_restart_aneg cxgb3: extend copyrights to 2008 cxgb3: update driver version net/phy: add missing kernel-doc pktgen: fix skb leak in case of failure mISDN/dsp_cmx.c: fix size checks misdn: use nonseekable_open() net: fix driver build errors due to missing net/ip6_checksum.h include
-
Julia Lawall authored
Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); .. if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ..> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
For some m68k configs, I get: | net/rfkill/rfkill-input.c: In function 'rfkill_start': | net/rfkill/rfkill-input.c:208: error: dereferencing pointer to incomplete type As the incomplete type is `struct task_struct', including <linux/sched.h> fixes it. Signed-off-by:
-
Geert Uytterhoeven authored
ERROR: "nvram_read_byte" [drivers/scsi/atari_scsi.ko] undefined! ERROR: "nvram_check_checksum" [drivers/scsi/atari_scsi.ko] undefined! Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_PROC_FS is not set, I get: | arch/m68k/kernel/ints.c:433: error: redefinition of 'init_irq_proc' | include/linux/interrupt.h:438: error: previous definition of 'init_irq_proc' was here This was introduced by commit 6168a702 ("Declare init_irq_proc before we use it."), which replaced the #ifdef protection of the init_irq_proc() call by a static inline dummy if CONFIG_PROC_FS is not set. Make init_irq_proc() depend on CONFIG_PROC_FS to fix this. Signed-off-by:
-
Adrian Bunk authored
This patch removes the no longer used m68k PCI code. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Adrian Bunk authored
This patch removes the Hades support that was marked as BROKEN 5 years ago. Signed-off-by:
-
Geert Uytterhoeven authored
Kill compiler warnings related to printf() formats in the input drivers for various HP9000 machines, which are shared between PA-RISC (suseconds_t is int) and m68k (suseconds_t is long). As both are 32-bit, it's safe to cast to int. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Geert Uytterhoeven authored
Several multi-bus subsystems: | include/linux/ssb/ssb.h: In function 'ssb_dma_mapping_error': | include/linux/ssb/ssb.h:430: error: implicit declaration of function 'pci_dma_mapping_error' | include/linux/ssb/ssb.h: In function 'ssb_dma_map_single': | include/linux/ssb/ssb.h:444: error: implicit declaration of function 'pci_map_single' | include/linux/ssb/ssb.h: In function 'ssb_dma_unmap_single': | include/linux/ssb/ssb.h:458: error: implicit declaration of function 'pci_unmap_single' | include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_for_cpu': | include/linux/ssb/ssb.h:475: error: implicit declaration of function 'pci_dma_sync_single_for_cpu' | include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_for_device': | include/linux/ssb/ssb.h:493: error: implicit declaration of function 'pci_dma_sync_single_for_device' or legacy drivers: | drivers/net/hp100.c: In function 'pdl_map_data': | drivers/net/hp100.c:291: error: implicit declaration of function 'pci_map_single' | drivers/net/hp100.c: In function 'hp100_probe1': | drivers/net/hp100.c:707: error: implicit declaration of function 'pci_alloc_consistent' | drivers/net/hp100.c:782: error: implicit declaration of function 'pci_free_consistent' | drivers/net/hp100.c: In function 'hp100_clean_txring': | drivers/net/hp100.c:1614: error: implicit declaration of function 'pci_unmap_single' and | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_allocate_scb': | drivers/scsi/aic7xxx_old.c:2573: error: implicit declaration of function 'pci_alloc_consistent' | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_done': | drivers/scsi/aic7xxx_old.c:2697: error: implicit declaration of function 'pci_unmap_single' | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_handle_seqint': | drivers/scsi/aic7xxx_old.c:4275: error: implicit declaration of function 'pci_map_single' | drivers/scsi/aic7xxx_old.c: In function 'aic7xxx_free': | drivers/scsi/aic7xxx_old.c:8460: error: implicit declaration of function 'pci_free_consistent' rely on PCI DMA operations to be always available. Add #include <asm-generic/pci-dma-compat.h> to <asm/pci.h> to make them happy. Signed-off-by:
-
Geert Uytterhoeven authored
| include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_cpu': | include/linux/ssb/ssb.h:517: error: implicit declaration of function 'dma_sync_single_range_for_cpu' | include/linux/ssb/ssb.h: In function 'ssb_dma_sync_single_range_for_device': | include/linux/ssb/ssb.h:538: error: implicit declaration of function 'dma_sync_single_range_for_device' Add the missing dma_sync_single_range_for_{cpu,device}(), and remove the `inline' for the non-static function dma_sync_single_for_device(). Signed-off-by: -
Geert Uytterhoeven authored
The nvram and rtc-cmos drivers use the spinlock rtc_lock to protect against concurrent accesses to the CMOS memory. As m68k doesn't support SMP or preempt yet, the spinlock calls tend to get optimized away, but not for all configurations, causing in some rare cases: | ERROR: "rtc_lock" [drivers/rtc/rtc-cmos.ko] undefined! | ERROR: "rtc_lock" [drivers/char/nvram.ko] undefined! Add the spinlock to the Atari core code to avoid this. Signed-off-by:
Michael Schmitz <schmitz@debian.org> Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_VT=n, I get: | arch/m68k/atari/built-in.o: In function `atari_kbd_translate': | arch/m68k/atari/atakeyb.c:640: undefined reference to `shift_state' Just remove atari_kbd_translate(), as it's unused. Signed-off-by:
-
Geert Uytterhoeven authored
| ERROR: "key_maps" [drivers/input/keyboard/amikbd.ko] undefined! Export key_maps in the Amiga core code, as its defined in an autogenerated file (drivers/char/defkeymap.c) Signed-off-by:
-
Geert Uytterhoeven authored
Currently Sun 3 support is the first platform option, as the Sun 3 MMU is incompatible with standard Motorola MMUs. However, this means that `allmodconfig' enables support for Sun 3, and thus disables support for all other platforms. Reverse the logic and move Sun 3 last, so `allmodconfig' enables all platforms except for Sun 3, increasing compile-coverage. Signed-off-by:
-
Roman Zippel authored
Add .note.gnu.build-id to init data so it's discarded at boot. [Andreas Schwab] Use NOTES macro Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Roman Zippel authored
Put .bss at the end of the data section Signed-off-by:
-
Geert Uytterhoeven authored
This changes the oops and backtrace code to use the new `%pS' printk() extension to print out symbols rather than manually calling print_symbol. Signed-off-by:
-
Adrian Bunk authored
This patch changes m68k to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. It also remove local bcd2bin/bin2bcd implementations in favor of the global ones. Signed-off-by:
-
Alan Cox authored
Splitting the 8250 code back up to avoid a clash with the NR_IRQS removal patch introduced a last minute bug. Put back the additional needed lines for the old lock init Signed-off-by:
Alan Cox <alan@redhat.com> [ Ingo also reports that this can cause a spontaneous reboot crash with certain configs, and sends in an identical patch ] Tested-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by:
-
Ron Mercer authored
This ASIC does support all page sizes. For 4k and 8k page size the TX control block needs an external scatter gather list. For page sizes larger than 8k the max frags is satisfied by the original TX control block. Signed-off-by:
Ron Mercer <ron.mercer@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alan Cox authored
Clean up the various different email addresses of mine listed in the code to a single current and valid address. As Dave says his network merges for 2.6.28 are now done this seems a good point to send them in where they won't risk disrupting real changes. Signed-off-by:
-
Heiko Carstens authored
git commit 45cec1ba "dsa: Need to select PHYLIB." causes this build bug on s390: drivers/built-in.o: In function `phy_stop_interrupts': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:631: undefined reference to `free_irq' /home/heicarst/linux-2.6/drivers/net/phy/phy.c:646: undefined reference to `enable_irq' drivers/built-in.o: In function `phy_start_interrupts': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:601: undefined reference to `request_irq' drivers/built-in.o: In function `phy_interrupt': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:528: undefined reference to `disable_irq_nosync' drivers/built-in.o: In function `phy_change': /home/heicarst/linux-2.6/drivers/net/phy/phy.c:674: undefined reference to `enable_irq' /home/heicarst/linux-2.6/drivers/net/phy/phy.c:692: undefined reference to `disable_irq' PHYLIB has alread a depend on !S390, however select PHYLIB at DSA overrides that unfortunately. So add a depend on !S390 to DSA as well. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Alexey Dobriyan authored
LD net/ipv6/ipv6.o WARNING: net/ipv6/ipv6.o(.text+0xd8): Section mismatch in reference from the function inet6_net_init() to the function .init.text:ipv6_init_mibs() Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Roland Dreier authored
I don't think the enic driver has anything to do with Mark Everett (http://en.wikipedia.org/wiki/A_Man_Called_E). Fix the Kconfig description. Signed-off-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Martin Langer authored
The de2104x returns sometimes a wrong MAC address. The wrong one is like the original one, but it comes with an one byte shift. I found this bug on an older alpha ev5 cpu. More details are available in Gentoo bugreport #240718. It seems the hardware is sometimes a little bit too slow for an immediate access. This patch solves the problem by introducing a small udelay. Signed-off-by:
Martin Langer <martin-langer@gmx.de> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
Adrian Bunk authored
This patch fixes the following build error caused by commit ed94493f (mv643xx_eth: convert to phylib): <-- snip --> ... Building modules, stage 2. MODPOST 1280 modules ERROR: "genphy_restart_aneg" [drivers/net/mv643xx_eth.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Signed-off-by:
-
Divy Le Ray authored
Update copyright banner to 2008. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Divy Le Ray authored
Add a field to the driver versioning info. Update version to 1.1.0. Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning, missing description: Warning(lin2627-g3-kdocfixes//drivers/net/phy/mdio_bus.c:63): No description found for parameter 'd' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Ilpo Järvinen authored
Seems that skb goes into void unless something magic happened in pskb_expand_head in case of failure. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Bunk authored
The checks for ensuring that the array indices are inside the range were flipped. Reported-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
The driver just sets ->llseek to NULL. It should also clear FMODE_LSEEK to tell the VFS that seeks are not supported. Pointed out by Christoph Hellwig. Signed-off-by:
-
Kamalesh Babulal authored
2.6.27-git2 kernel build fails with allyesconfig on powerpc with build error <introduced by commit 01f2e4ea> CC drivers/net/enic/enic_main.o drivers/net/enic/enic_main.c: In function âenic_queue_wq_skb_tsoâ: drivers/net/enic/enic_main.c:576: error: implicit declaration of function âcsum_ipv6_magicâ make[3]: *** [drivers/net/enic/enic_main.o] Error 1 <introduced by commit c4e84bde> drivers/net/qlge/qlge_main.c: In function âql_tsoâ: drivers/net/qlge/qlge_main.c:1862: error: implicit declaration of function âcsum_ipv6_magicâ make[3]: *** [drivers/net/qlge/qlge_main.o] Error 1 <introduced by commit 95252236> drivers/net/jme.c: In function âjme_tx_tsoâ: drivers/net/jme.c:1784: error: implicit declaration of function âcsum_ipv6_magicâ make[2]: *** [drivers/net/jme.o] Error 1 Signed-off-by:
-
