- 18 Dec, 2014 27 commits
-
-
Andrey Yurovsky authored
The driver was reading the PART_NUM register for both the part number (type of device) and the part version, the version is actually in register 0x1D, VERSION_NUM. I believe that this was a copy-paste error. Tested on AT86RF212B where the part is detected to be the expected part number (0x07) and version (0x03 on mine). Signed-off-by: Andrey Yurovsky <andrey@snupi.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
The attribute extra_tx_headroom should already be zero. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <s.schmidt@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch changes the context pointer to the parameter given one inside function at86rf230_async_state_change_start. This could occur problem if context isn't pointed to lp->state. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <s.schmidt@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch makes the at86rf230_async_error inline. This function is small enough to handle inline. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <s.schmidt@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch removes an unnecessary if branch inside the tx complete handler. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <s.schmidt@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Stefan Schmidt authored
CC: Alan Ott <alan@signal11.us> Signed-off-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Stefan Schmidt authored
CC: Alan Ott <alan@signal11.us> Signed-off-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Stefan Schmidt authored
CC: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Stefan Schmidt authored
Signed-off-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Stefan Schmidt authored
Signed-off-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Stefan Schmidt authored
Signed-off-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds the default cca setting after device reset for at86rf230 driver. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds support for setting cca parameters via nl802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
The current cca setting handle is a driver specific call. We need to introduce some 802.15.4 specific layer and mapping 802.15.4 cca modes to driver specific ones inside the 802.15.4 driver. This patch will add such 802.15.4 layer and mapping the cca settings to driver specific ones. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds enums for 802.15.4 specific CCA settings. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Toshi Kikuchi authored
Set hdev->set_bdaddr handler for ath3012. It sends the vendor specific HCI command to change the public address. The change doesn't persist across power cycle. Signed-off-by: Toshi Kikuchi <toshik@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2014-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== pull-request: mac80211 2014-12-18 Also from me a first pull request - we have a number of really old issues that happened to crop up now with new work (or just more testing) in the right areas as well as some small bugs newly introduced in 3.19. Let me know if there are any problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2014-12-17 Here's the first direct (i.e. skipping the wireless tree) bluetooth pull request for you, intended for 3.19. It's just one patch: a fix from Marcel for for remote service discovery filtering which also fixes a 'used uninitialized' compiler warning. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sriharsha Basavapatna authored
An earlier commit to resolve an issue with encapsulation offloads missed setting a bit in the outer netdev features flag. This results in loss of TSO feature on a VxLAN interface. Fixes: 630f4b70 ("Export tunnel offloads only when a VxLAN tunnel is created") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
Noticed when debugging ptp. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Vrabel authored
Commit bc96f648 (xen-netback: make feature-rx-notify mandatory) incorrectly assumed that there were no frontends in use that did not support this feature. But the frontend driver in MiniOS does not and since this is used by (qemu) stubdoms, these stopped working. Netback sort of works as-is in this mode except: - If there are no Rx requests and the internal Rx queue fills, only the drain timeout will wake the thread. The default drain timeout of 10 s would give unacceptable pauses. - If an Rx stall was detected and the internal Rx queue is drained, then the Rx thread would never wake. Handle these two cases (when feature-rx-notify is disabled) by: - Reducing the drain timeout to 30 ms. - Disabling Rx stall detection. Reported-by: John <jw@nuclearfallout.net> Tested-by: John <jw@nuclearfallout.net> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
http://marc.info/?l=linux-wireless&m=141883202530292&w=2 This makes it official... :-) Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
QSA module was getting decoded as QSFP module in ethtool get settings, this patch fixes it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesse Gross authored
Currently, searching for a socket to add a reference to is not synchronized with deletion of sockets. This can result in use after free if there is another operation that is removing a socket at the same time. Solving this requires both holding the appropriate lock and checking the refcount to ensure that it has not already hit zero. Inspired by a related (but not exactly the same) issue in the VXLAN driver. Fixes: 0b5e8b8e ("net: Add Geneve tunneling protocol driver") CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesse Gross authored
Sockets aren't currently removed from the the global list when they are destroyed. In addition, offload handlers need to be cleaned up as well. Fixes: 0b5e8b8e ("net: Add Geneve tunneling protocol driver") CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Each mmap Netlink frame contains a status field which indicates whether the frame is unused, reserved, contains data or needs to be skipped. Both loads and stores may not be reordeded and must complete before the status field is changed and another CPU might pick up the frame for use. Use an smp_mb() to cover needs of both types of callers to netlink_set_status(), callers which have been reading data frame from the frame, and callers which have been filling or releasing and thus writing to the frame. - Example code path requiring a smp_rmb(): memcpy(skb->data, (void *)hdr + NL_MMAP_HDRLEN, hdr->nm_len); netlink_set_status(hdr, NL_MMAP_STATUS_UNUSED); - Example code path requiring a smp_wmb(): hdr->nm_uid = from_kuid(sk_user_ns(sk), NETLINK_CB(skb).creds.uid); hdr->nm_gid = from_kgid(sk_user_ns(sk), NETLINK_CB(skb).creds.gid); netlink_frame_flush_dcache(hdr); netlink_set_status(hdr, NL_MMAP_STATUS_VALID); Fixes: f9c228 ("netlink: implement memory mapped recvmsg()") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Miller authored
Checking the file f_count and the nlk->mapped count is not completely sufficient to prevent the mmap'd area contents from changing from under us during netlink mmap sendmsg() operations. Be careful to sample the header's length field only once, because this could change from under us as well. Fixes: 5fd96123 ("netlink: implement memory mapped sendmsg()") Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch>
-
- 17 Dec, 2014 2 commits
-
-
Marcel Holtmann authored
The optimization for filtering out extended inquiry results, advertising reports or scan response data based on provided UUID list has a logic bug. In case no match is found in the advertising data, the scan response is ignored and not checked against the filter. This will lead to events being filtered wrongly. Change the code to actually only drop the events when the scan response data is not present. If it is present, it needs to be checked against the provided filter. The patch is a bit more complex than it needs to be. That is because it also fixes this compiler warning that some gcc versions produce. CC net/bluetooth/mgmt.o net/bluetooth/mgmt.c: In function ‘mgmt_device_found’: net/bluetooth/mgmt.c:7028:7: warning: ‘match’ may be used uninitialized in this function [-Wmaybe-uninitialized] bool match; ^ It seems that gcc can not clearly figure out the context of the match variable. So just change the branches for the extended inquiry response and advertising data around so that it is clear. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Johannes Berg authored
When writing the code to allow per-station GTKs, I neglected to take into account the management frame keys (index 4 and 5) when freeing the station and only added code to free the first four data frame keys. Fix this by iterating the array of keys over the right length. Cc: stable@vger.kernel.org Fixes: e31b8213 ("cfg80211/mac80211: allow per-station GTKs") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
- 16 Dec, 2014 11 commits
-
-
Or Gerlitz authored
The current implementations all use dev_uc_add_excl() and such whose API doesn't support vlans, so we can't make it with NICs HW for now. Fixes: f6f6424b ('net: make vid as a parameter for ndo_fdb_add/ndo_fdb_del') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Shamay authored
This commit contains 2 fixes for the 128B CQE/EQE stride feaure. Wei found that mlx4_QUERY_HCA function marked the wrong capability in flags (64B CQE/EQE), when CQE/EQE stride feature was enabled. Also added small fix in initial CQE ownership bit assignment, when CQE is size is not default 32B. Fixes: 77507aa2 (net/mlx4: Enable CQE/EQE stride support) Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nimrod Andy authored
Do camera capture test on i.MX6q sabresd board, and save the capture data to nfs rootfs. The command is: gst-launch-1.0 -e imxv4l2src device=/dev/video1 num-buffers=2592000 ! tee name=t ! queue ! imxv4l2sink sync=false t. ! queue ! vpuenc ! queue ! mux. pulsesrc num-buffers=3720937 blocksize=4096 ! 'audio/x-raw, rate=44100, channels=2' ! queue ! imxmp3enc ! mpegaudioparse ! queue ! mux. qtmux name=mux ! filesink location=video_recording_long.mov After about 10 hours running, there have net watchdog timeout kernel dump: ... WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x2b4/0x2d8() NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.24-01051-gdb840b7 #440 [<80014e6c>] (unwind_backtrace) from [<800118ac>] (show_stack+0x10/0x14) [<800118ac>] (show_stack) from [<806ae3f0>] (dump_stack+0x78/0xc0) [<806ae3f0>] (dump_stack) from [<8002b504>] (warn_slowpath_common+0x68/0x8c) [<8002b504>] (warn_slowpath_common) from [<8002b558>] (warn_slowpath_fmt+0x30/0x40) [<8002b558>] (warn_slowpath_fmt) from [<8055e0d4>] (dev_watchdog+0x2b4/0x2d8) [<8055e0d4>] (dev_watchdog) from [<800352d8>] (call_timer_fn.isra.33+0x24/0x8c) [<800352d8>] (call_timer_fn.isra.33) from [<800354c4>] (run_timer_softirq+0x184/0x220) [<800354c4>] (run_timer_softirq) from [<8002f420>] (__do_softirq+0xc0/0x22c) [<8002f420>] (__do_softirq) from [<8002f804>] (irq_exit+0xa8/0xf4) [<8002f804>] (irq_exit) from [<8000ee5c>] (handle_IRQ+0x54/0xb4) [<8000ee5c>] (handle_IRQ) from [<80008598>] (gic_handle_irq+0x28/0x5c) [<80008598>] (gic_handle_irq) from [<800123c0>] (__irq_svc+0x40/0x74) Exception stack(0x80d27f18 to 0x80d27f60) 7f00: 80d27f60 0000014c 7f20: 8858c60e 0000004d 884e4540 0000004d ab7250d0 80d34348 00000000 00000000 7f40: 00000001 00000000 00000017 80d27f60 800702a4 80476e6c 600f0013 ffffffff [<800123c0>] (__irq_svc) from [<80476e6c>] (cpuidle_enter_state+0x50/0xe0) [<80476e6c>] (cpuidle_enter_state) from [<80476fa8>] (cpuidle_idle_call+0xac/0x154) [<80476fa8>] (cpuidle_idle_call) from [<8000f174>] (arch_cpu_idle+0x8/0x44) [<8000f174>] (arch_cpu_idle) from [<80064c54>] (cpu_startup_entry+0x100/0x158) [<80064c54>] (cpu_startup_entry) from [<80cd8a9c>] (start_kernel+0x304/0x368) ---[ end trace 09ebd32fb032f86d ]--- ... There might have a race in napi_schedule(), leaving interrupts disabled forever. After these patch, the case still work more than 40 hours running. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Vrabel authored
After d75b1ade (net: less interrupt masking in NAPI) the napi instance is removed from the per-cpu list prior to calling the n->poll(), and is only requeued if all of the budget was used. This inadvertently broke netfront because netfront does not use NAPI correctly. If netfront had not used all of its budget it would do a final check for any Rx responses and avoid calling napi_complete() if there were more responses. It would still return under budget so it would never be rescheduled. The final check would also not re-enable the Rx interrupt. Additionally, xenvif_poll() would also call napi_complete() /after/ enabling the interrupt. This resulted in a race between the napi_complete() and the napi_schedule() in the interrupt handler. The use of local_irq_save/restore() avoided by race iff the handler is running on the same CPU but not if it was running on a different CPU. Fix both of these by always calling napi_compete() if the budget was not all used, and then calling napi_schedule() if the final checks says there's more work. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
The encap->type comes straight from Netlink. Validate it against max supported encap types just like ip_encap_hlen() already does. Fixes: a8c5f9 ("ip_tunnel: Ops registration for secondary encap (fou, gue)") Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
The symbols are exported and could be used by external modules. Fixes: a8c5f9 ("ip_tunnel: Ops registration for secondary encap (fou, gue)") Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== pull request: wireless 2014-12-16 Please pull this batch of fixes intended for the 3.19 stream! For the Bluetooth bits, Johan says: "The patches consist of: - Coccinelle warning fix - hci_dev_lock/unlock fixes - Fixes for pending mgmt command handling - Fixes for properly following the force_lesc_support switch - Fix for a Microsoft branded Broadcom adapter - New device id for Atheros AR3012 - Fix for BR/EDR Secure Connections enabling" Along with that... Brian Norris avoids leaking some kernel memory contents via printk in brcmsmac. Julia Lawall corrects some misspellings in a few drivers. Larry Finger gives us one more rtlwifi fix to correct a porting oversight. Wei Yongjun fixes a sparse warning in rtlwifi. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Otherwise we get things like: warning: (NET_DSA_BCM_SF2 && BCMGENET && SYSTEMPORT) selects FIXED_PHY which has unmet direct dependencies (NETDEVICES && PHYLIB=y) In order to make this work we have to rename fixed.c to fixed_phy.c because the regulator drivers already have a module named "fixed.o". Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael S. Tsirkin says: ==================== tun/macvtap: TUNSETIFF fixes Dan Carpenter reported the following: static checker warning: drivers/net/tun.c:1694 tun_set_iff() warn: 0x17100 is larger than 16 bits drivers/net/tun.c 1692 1693 tun->flags = (tun->flags & ~TUN_FEATURES) | 1694 (ifr->ifr_flags & TUN_FEATURES); 1695 It's complaining because the "ifr->ifr_flags" variable is a short (should it be unsigned?). The new define: #define IFF_VNET_LE 0x10000 doesn't fit in two bytes. Other suspect looking code could be: return __virtio16_to_cpu(q->flags & IFF_VNET_LE, val); And that's true: we have run out of IFF flags in tun. So let's not try to add more: add simple GET/SET ioctls instead. Easy to test, leads to clear semantics. Alternatively we'll have to revert the whole thing for 3.19, but that seems more work as this has dependencies in other places. While here, I noticed that macvtap was actually reading ifreq flags as a 32 bit field. Fix that up as well. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
Everyone should use TUNSETVNETLE/TUNGETVNETLE instead. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
Use TUNSETVNETLE/TUNGETVNETLE instead. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-