Benefit from the fact that the generic netlink code can parse the attrs
for dumpit op and avoid need to parse it in the op callback.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend the dumpit info struct for attrs. Instead of existing attribute
validation do parse them and save in the info struct. Caller can benefit
from this and does not have to do parse itself. In order to properly
free attrs, genl_family pointer needs to be added to dumpit info struct
as well.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To be re-usable by dumpit as well, push the code that is taking care of
attrbuf allocation and parting from doit into separate function.
Introduce a helper to free the buffer too.

Check family->maxattr too before calling kfree() to be symmetrical with
the allocation check.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the cb->data is taken by ops during non-parallel dumping.
Introduce a new structure genl_dumpit_info and store the ops there.
Distribute the info to both non-parallel and parallel dumping. Also add
a helper genl_dumpit_info() to easily get the info structure in the
dumpit callback from cb.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the function genl_family_rcv_msg() is quite big. Since it is
quite convenient, push code that is related to doit and dumpit ops into
separate functions.

Do small changes on the way, like rc/err unification, NULL check etc.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch allows to attach conntrack helper to a confirmed conntrack
entry.  Currently, we can only attach alg helper to a conntrack entry
when it is in the unconfirmed state.  This patch enables an use case
that we can firstly commit a conntrack entry after it passed some
initial conditions.  After that the processing pipeline will further
check a couple of packets to determine if the connection belongs to
a particular application, and attach alg helper to the connection
in a later stage.
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
create netdevsim instances in namespace

Allow user to create netdevsim devlink and netdevice instances in a
network namespace according to the namespace where the user resides in.
Add a selftest to test this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a test that creates netdevsim instance inside network namespace
and verifies that the related devlink instance and port netdevices
reside in the namespace.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When user does create new netdevsim instance using sysfs bus file,
create the devlink instance and related netdev instance in the namespace
of the caller.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For newly allocated devlink instance allow drivers to set net struct
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net/tls: add ctrl path tracing and statistics

This set adds trace events related to TLS offload and basic MIB stats
for TLS.

First patch contains the TLS offload related trace points. Those are
helpful in troubleshooting offload issues, especially around the
resync paths.

Second patch adds a tracepoint to the fastpath of device offload,
it's separated out in case there will be objections to adding
fast path tracepoints. Again, it's quite useful for debugging
offload issues.

Next four patches add MIB statistics. The statistics are implemented
as per-cpu per-netns counters. Since there are currently no fast path
statistics we could move to atomic variables. Per-CPU seem more common.

Most basic statistics are number of created and live sessions, broken
out to offloaded and non-offloaded. Users seem to like those a lot.

Next there is a statistic for decryption errors. These are primarily
useful for device offload debug, in normal deployments decryption
errors should not be common.

Last but not least a counter for device RX resync.
====================
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a statistic for number of RX resyncs sent down to the NIC.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a statistic for TLS record decryption errors.

Since devices are supposed to pass records as-is when they
encounter errors this statistic will count bad records in
both pure software and inline crypto configurations.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add SNMP stats for number of sockets with successfully
installed sessions.  Break them down to software and
hardware ones.  Note that if hardware offload fails
stack uses software implementation, and counts the
session appropriately.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a skeleton structure for adding TLS statistics.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a tracepoint to the TLS offload's fast path. This tracepoint
can be used to track the decrypted and encrypted status of received
records. Records decrypted by the device should have decrypted set
to 1, records which have neither decrypted nor decrypted set are
partially decrypted, require re-encryption and therefore are most
expensive to deal with.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add tracing of device-related interaction to aid performance
analysis, especially around resync:

 tls:tls_device_offload_set
 tls:tls_device_rx_resync_send
 tls:tls_device_rx_resync_nh_schedule
 tls:tls_device_rx_resync_nh_delay
 tls:tls_device_tx_resync_req
 tls:tls_device_tx_resync_send
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - remove unneeded ar-option and KBUILD_ARFLAGS

 - remove long-deprecated SUBDIRS

 - fix modpost to suppress false-positive warnings for UML builds

 - fix namespace.pl to handle relative paths to ${objtree}, ${srctree}

 - make setlocalversion work for /bin/sh

 - make header archive reproducible

 - fix some Makefiles and documents

* tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: make headers archive reproducible
  kbuild: update compile-test header list for v5.4-rc2
  kbuild: two minor updates for Documentation/kbuild/modules.rst
  scripts/setlocalversion: clear local variable to make it work for sh
  namespace: fix namespace.pl script to support relative paths
  video/logo: do not generate unneeded logo C files
  video/logo: remove unneeded *.o pattern from clean-files
  integrity: remove pointless subdir-$(CONFIG_...)
  integrity: remove unneeded, broken attempt to add -fshort-wchar
  modpost: fix static EXPORT_SYMBOL warnings for UML build
  kbuild: correct formatting of header in kbuild module docs
  kbuild: remove SUBDIRS support
  kbuild: remove ar-option and KBUILD_ARFLAGS

Pull SCSI fixes from James Bottomley:
 "Twelve patches mostly small but obvious fixes or cosmetic but small
  updates"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix Nport ID display value
  scsi: qla2xxx: Fix N2N link up fail
  scsi: qla2xxx: Fix N2N link reset
  scsi: qla2xxx: Optimize NPIV tear down process
  scsi: qla2xxx: Fix stale mem access on driver unload
  scsi: qla2xxx: Fix unbound sleep in fcport delete path.
  scsi: qla2xxx: Silence fwdump template message
  scsi: hisi_sas: Make three functions static
  scsi: megaraid: disable device when probe failed after enabled device
  scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue
  scsi: qedf: Remove always false 'tmp_prio < 0' statement
  scsi: ufs: skip shutdown if hba is not powered
  scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF

This makes getdents() and getdents64() do sanity checking on the
pathname that it gives to user space.  And to mitigate the performance
impact of that, it first cleans up the way it does the user copying, so
that the code avoids doing the SMAP/PAN updates between each part of the
dirent structure write.

I really wanted to do this during the merge window, but didn't have
time.  The conversion of filldir to unsafe_put_user() is something I've
had around for years now in a private branch, but the extra pathname
checking finally made me clean it up to the point where it is mergable.

It's worth noting that the filename validity checking really should be a
bit smarter: it would be much better to delay the error reporting until
the end of the readdir, so that non-corrupted filenames are still
returned.  But that involves bigger changes, so let's see if anybody
actually hits the corrupt directory entry case before worrying about it
further.

* branch 'readdir':
  Make filldir[64]() verify the directory entry filename is valid
  Convert filldir[64]() from __put_user() to unsafe_put_user()

This has been discussed several times, and now filesystem people are
talking about doing it individually at the filesystem layer, so head
that off at the pass and just do it in getdents{64}().

This is partially based on a patch by Jann Horn, but checks for NUL
bytes as well, and somewhat simplified.

There's also commentary about how it might be better if invalid names
due to filesystem corruption don't cause an immediate failure, but only
an error at the end of the readdir(), so that people can still see the
filenames that are ok.

There's also been discussion about just how much POSIX strictly speaking
requires this since it's about filesystem corruption.  It's really more
"protect user space from bad behavior" as pointed out by Jann.  But
since Eric Biederman looked up the POSIX wording, here it is for context:

 "From readdir:

   The readdir() function shall return a pointer to a structure
   representing the directory entry at the current position in the
   directory stream specified by the argument dirp, and position the
   directory stream at the next entry. It shall return a null pointer
   upon reaching the end of the directory stream. The structure dirent
   defined in the <dirent.h> header describes a directory entry.

  From definitions:

   3.129 Directory Entry (or Link)

   An object that associates a filename with a file. Several directory
   entries can associate names with the same file.

  ...

   3.169 Filename

   A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
   characters composing the name may be selected from the set of all
   character values excluding the slash character and the null byte. The
   filenames dot and dot-dot have special meaning. A filename is
   sometimes referred to as a 'pathname component'."

Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.

Also note that if this ends up being noticeable as a performance
regression, we can fix that to do a much more optimized model that
checks for both NUL and '/' at the same time one word at a time.

We haven't really tended to optimize 'memchr()', and it only checks for
one pattern at a time anyway, and we really _should_ check for NUL too
(but see the comment about "soft errors" in the code about why it
currently only checks for '/')

See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
lookup code looks for pathname terminating characters in parallel.

Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We really should avoid the "__{get,put}_user()" functions entirely,
because they can easily be mis-used and the original intent of being
used for simple direct user accesses no longer holds in a post-SMAP/PAN
world.

Manually optimizing away the user access range check makes no sense any
more, when the range check is generally much cheaper than the "enable
user accesses" code that the __{get,put}_user() functions still need.

So instead of __put_user(), use the unsafe_put_user() interface with
user_access_{begin,end}() that really does generate better code these
days, and which is generally a nicer interface.  Under some loads, the
multiple user writes that filldir() does are actually quite noticeable.

This also makes the dirent name copy use unsafe_put_user() with a couple
of macros.  We do not want to make function calls with SMAP/PAN
disabled, and the code this generates is quite good when the
architecture uses "asm goto" for unsafe_put_user() like x86 does.

Note that this doesn't bother with the legacy cases.  Nobody should use
them anyway, so performance doesn't really matter there.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold.

 2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric
    Dumazet.

 3) txq null deref in mac80211, from Miaoqing Pan.

 4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann.

 5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso.

 6) Avoid division by zero in taprio scheduler, from Vladimir Oltean.

 7) Various xgmac fixes in stmmac driver from Jose Abreu.

 8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from
    Michal Kubecek.

 9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij.

10) Fix sleep while atomic in sja1105, from Vladimir Oltean.

11) Suspend/resume deadlock in stmmac, from Thierry Reding.

12) Various UDP GSO fixes from Josh Hunt.

13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric
    Dumazet.

14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern.

15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  selftests/net: add nettest to .gitignore
  net: qlogic: Fix memory leak in ql_alloc_large_buffers
  nfc: fix memory leak in llcp_sock_bind()
  sch_dsmark: fix potential NULL deref in dsmark_init()
  net: phy: at803x: use operating parameters from PHY-specific status
  net: phy: extract pause mode
  net: phy: extract link partner advertisement reading
  net: phy: fix write to mii-ctrl1000 register
  ipv6: Handle missing host route in __ipv6_ifa_notify
  net: phy: allow for reset line to be tied to a sleepy GPIO controller
  net: ipv4: avoid mixed n_redirects and rate_tokens usage
  r8152: Set macpassthru in reset_resume callback
  cxgb4:Fix out-of-bounds MSI-X info array access
  Revert "ipv6: Handle race in addrconf_dad_work"
  net: make sock_prot_memory_pressure() return "const char *"
  rxrpc: Fix rxrpc_recvmsg tracepoint
  qmi_wwan: add support for Cinterion CLS8 devices
  tcp: fix slab-out-of-bounds in tcp_zerocopy_receive()
  lib: textsearch: fix escapes in example code
  udp: only do GSO if # of segs > 1
  ...

Pull s390 fixes from Vasily Gorbik:

 - defconfig updates

 - Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i"
   constraint for function arguments. Two kvm changes acked-by Christian
   Borntraeger.

 - Fix -Wunused-but-set-variable warnings in mm code.

 - Avoid a constant misuse in qdio.

 - Handle a case when cpumf is temporarily unavailable.

* tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390: mark __insn32_query() as __always_inline
  KVM: s390: fix __insn32_query() inline assembly
  s390: update defconfigs
  s390/pci: mark function(s) __always_inline
  s390/mm: mark function(s) __always_inline
  s390/jump_label: mark function(s) __always_inline
  s390/cpu_mf: mark function(s) __always_inline
  s390/atomic,bitops: mark function(s) __always_inline
  s390/mm: fix -Wunused-but-set-variable warnings
  s390: mark __cpacf_query() as __always_inline
  s390/qdio: clarify size of the QIB parm area
  s390/cpumf: Fix indentation in sampling device driver
  s390/cpumsf: Check for CPU Measurement sampling
  s390/cpumf: Use consistant debug print format

__insn32_query() will not compile if the compiler decides to not
inline it, since it contains an inline assembly with an "i" constraint
with variable contents.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

The inline assembly constraints of __insn32_query() tell the compiler
that only the first byte of "query" is being written to. Intended was
probably that 32 bytes are written to.

Fix and simplify the code and just use a "memory" clobber.

Fixes: d6681397 ("KVM: s390: provide query function for instructions returning 32 byte")
Cc: stable@vger.kernel.org # v5.2+
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

In commit 43d8ce9d ("Provide in-kernel headers to make
extending kernel easier") a new mechanism was introduced, for kernels
>=5.2, which embeds the kernel headers in the kernel image or a module
and exposes them in procfs for use by userland tools.

The archive containing the header files has nondeterminism caused by
header files metadata. This patch normalizes the metadata and utilizes
KBUILD_BUILD_TIMESTAMP if provided and otherwise falls back to the
default behaviour.

In commit f7b101d3 ("kheaders: Move from proc to sysfs") it was
modified to use sysfs and the script for generation of the archive was
renamed to what is being patched.
Signed-off-by: Dmitry Goldin <dgoldin+lkml@protonmail.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Commit 6dc280eb ("coda: remove uapi/linux/coda_psdev.h") removed
a header in question. Some more build errors were fixed. Add more
headers into the test coverage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Capitalize the first word in the sentence.

Use obj-m instead of obj-y. obj-y still works, but we have no built-in
objects in external module builds. So, obj-m is better IMHO.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Geert Uytterhoeven reports a strange side-effect of commit 858805b3
("kbuild: add $(BASH) to run scripts with bash-extension"), which
inserts the contents of a localversion file in the build directory twice.

[Steps to Reproduce]
  $ echo bar > localversion
  $ mkdir build
  $ cd build/
  $ echo foo > localversion
  $ make -s -f ../Makefile defconfig include/config/kernel.release
  $ cat include/config/kernel.release
  5.4.0-rc1foofoobar

This comes down to the behavior change of local variables.

The 'man sh' on my Ubuntu machine, where sh is an alias to dash,
explains as follows:
  When a variable is made local, it inherits the initial value and
  exported and readonly flags from the variable with the same name
  in the surrounding scope, if there is one. Otherwise, the variable
  is initially unset.

[Test Code]

  foo ()
  {
          local res
          echo "res: $res"
  }

  res=1
  foo

[Result]

  $ sh test.sh
  res: 1
  $ bash test.sh
  res:

So, scripts/setlocalversion correctly works only for bash in spite of
its hashbang being #!/bin/sh. Nobody had noticed it before because
CONFIG_SHELL was previously set to bash almost all the time.

Now that CONFIG_SHELL is set to sh, we must write portable and correct
code. I gave the Fixes tag to the commit that uncovered the issue.

Clear the variable 'res' in collect_files() to make it work for sh
(and it also works on distributions where sh is an alias to bash).

Fixes: 858805b3 ("kbuild: add $(BASH) to run scripts with bash-extension")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>

The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.

Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.

This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.

This behavior was changed in 7e1c0477 ("kbuild: Use relative path
for $(objtree)", 2014-05-14)

Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.

Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.

The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.

rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.

Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, all the logo C files are generated irrespective of the
CONFIG options. Adding them to extra-y is wrong. What we need to do
here is to add them to 'targets' so that if_changed works properly.

Files listed in 'targets' are cleaned, so clean-files is unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The pattern *.o is cleaned up globally by the top Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The ima/ and evm/ sub-directories contain built-in objects, so
obj-$(CONFIG_...) is the correct way to descend into them.

subdir-$(CONFIG_...) is redundant.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

I guess commit 15ea0e1e ("efi: Import certificates from UEFI Secure
Boot") attempted to add -fshort-wchar for building load_uefi.o, but it
has never worked as intended.

load_uefi.o is created in the platform_certs/ sub-directory. If you
really want to add -fshort-wchar, the correct code is:

  $(obj)/platform_certs/load_uefi.o: KBUILD_CFLAGS += -fshort-wchar

But, you do not need to fix it.

Commit 8c97023c ("Kbuild: use -fshort-wchar globally") had already
added -fshort-wchar globally. This code was unneeded in the first place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

nettest is missing from gitignore.

Fixes: acda655f ("selftests: Add nettest")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb.
This skb should be released if pci_dma_mapping_error fails.

Fixes: 0f8ab89e ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sysbot reported a memory leak after a bind() has failed.

While we are at it, abort the operation if kmemdup() has failed.

BUG: memory leak
unreferenced object 0xffff888105d83ec0 (size 32):
  comm "syz-executor067", pid 7207, jiffies 4294956228 (age 19.430s)
  hex dump (first 32 bytes):
    00 69 6c 65 20 72 65 61 64 00 6e 65 74 3a 5b 34  .ile read.net:[4
    30 32 36 35 33 33 30 39 37 5d 00 00 00 00 00 00  026533097]......
  backtrace:
    [<0000000036bac473>] kmemleak_alloc_recursive /./include/linux/kmemleak.h:43 [inline]
    [<0000000036bac473>] slab_post_alloc_hook /mm/slab.h:522 [inline]
    [<0000000036bac473>] slab_alloc /mm/slab.c:3319 [inline]
    [<0000000036bac473>] __do_kmalloc /mm/slab.c:3653 [inline]
    [<0000000036bac473>] __kmalloc_track_caller+0x169/0x2d0 /mm/slab.c:3670
    [<000000000cd39d07>] kmemdup+0x27/0x60 /mm/util.c:120
    [<000000008e57e5fc>] kmemdup /./include/linux/string.h:432 [inline]
    [<000000008e57e5fc>] llcp_sock_bind+0x1b3/0x230 /net/nfc/llcp_sock.c:107
    [<000000009cb0b5d3>] __sys_bind+0x11c/0x140 /net/socket.c:1647
    [<00000000492c3bbc>] __do_sys_bind /net/socket.c:1658 [inline]
    [<00000000492c3bbc>] __se_sys_bind /net/socket.c:1656 [inline]
    [<00000000492c3bbc>] __x64_sys_bind+0x1e/0x30 /net/socket.c:1656
    [<0000000008704b2a>] do_syscall_64+0x76/0x1a0 /arch/x86/entry/common.c:296
    [<000000009f4c57a4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 30cc4587 ("NFC: Move LLCP code to the NFC top level diirectory")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure TCA_DSMARK_INDICES was provided by the user.

syzbot reported :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8799 Comm: syz-executor235 Not tainted 5.3.0+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:nla_get_u16 include/net/netlink.h:1501 [inline]
RIP: 0010:dsmark_init net/sched/sch_dsmark.c:364 [inline]
RIP: 0010:dsmark_init+0x193/0x640 net/sched/sch_dsmark.c:339
Code: 85 db 58 0f 88 7d 03 00 00 e8 e9 1a ac fb 48 8b 9d 70 ff ff ff 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 ca
RSP: 0018:ffff88809426f3b8 EFLAGS: 00010247
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff85c6eb09
RDX: 0000000000000000 RSI: ffffffff85c6eb17 RDI: 0000000000000004
RBP: ffff88809426f4b0 R08: ffff88808c4085c0 R09: ffffed1015d26159
R10: ffffed1015d26158 R11: ffff8880ae930ac7 R12: ffff8880a7e96940
R13: dffffc0000000000 R14: ffff88809426f8c0 R15: 0000000000000000
FS:  0000000001292880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 000000008ca1b000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 qdisc_create+0x4ee/0x1210 net/sched/sch_api.c:1237
 tc_modify_qdisc+0x524/0x1c50 net/sched/sch_api.c:1653
 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5223
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5241
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x803/0x920 net/socket.c:2311
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356
 __do_sys_sendmsg net/socket.c:2365 [inline]
 __se_sys_sendmsg net/socket.c:2363 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363
 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440369

Fixes: 758cc43c ("[PKT_SCHED]: Fix dsmark to apply changes consistent")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>