- 05 Oct, 2017 5 commits
-
-
Arnd Bergmann authored
An earlier bugfix tried to work around this build failure: drivers/gpu/drm/i915/selftests/mock_gem_device.c: In function 'mock_gem_device': drivers/gpu/drm/i915/selftests/mock_gem_device.c:151:20: error: 'struct dev_archdata' has no member named 'iommu' Checking for CONFIG_IOMMU_API is not sufficient as a compile-time test since that may be enabled in configurations that have neither INTEL_IOMMU not AMD_IOMMU enabled. This changes the check to INTEL_IOMMU instead, as this is the only case we actually care about. Fixes: f46f156e ("drm/i915/selftests: Only touch archdata.iommu when it exists") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171005120749.400818-1-arnd@arndb.de
-
Chris Wilson authored
For the fake device we have our own set of mock contexts that need to match the real contexts we normally create. Currently this requires us to manually instantiate them for the selftests, which I forgot. Reported-by: Matthew Auld <matthew.william.auld@gmail.com> Fixes: e7af3116 ("drm/i915: Introduce a preempt context") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171005105927.22991-1-chris@chris-wilson.co.ukReviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
-
Manasi Navare authored
For this specific PCI device, the eDP panel requires a higher panel power cycle delay of 1300ms where the minimum spec requirement of panel power cycle delay is 500ms. This fix in combination with correct timestamp at which we get the panel power off time fixes the dP AUX CH timeouts seen on various IGT tests. Fixes: c99a259b ("drm/i915/edp: Add a T12 panel delay quirk to fix DP AUX CH timeouts") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518 Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507073845-13420-2-git-send-email-manasi.d.navare@intel.com
-
Manasi Navare authored
Kernel stores the time in jiffies at which the eDP panel is turned off. This should be obtained after the panel is off (after the wait_panel_off). When we next attempt to turn the panel on, we use the difference between the timestamp at which we want to turn the panel on and timestamp at which panel was turned off to ensure that this is equal to panel power cycle delay and if not we wait for the remaining time. Not waiting for the panel power cycle delay can cause the panel to not turn on giving rise to AUX timeouts for the attempted AUX transactions. v2: * Separate lines for bugzilla (Jani Nikula) * Suggested by tag (Daniel Vetter) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507135706-17147-1-git-send-email-manasi.d.navare@intel.com
-
Dhinakaran Pandiyan authored
Use the POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions to set power states for downstream sinks. Apart from giving us the ability to set power state for individual sinks, this fixes the below test for me. $ xrandr --display :0 --output DP-2-2-8 --off $ xrandr --display :0 --output DP-2-2-1 --off $ xrandr --display :0 --output DP-2-2-8 --auto #Black screen $ xrandr --display :0 --output DP-2-2-1 --auto v2: Modify and document the dpms and port disable order (Ville) Add comment explaining is_mst = !crtc_state equivalence(Ville, Maarten) v3 by Jani: rebase References: https://bugs.freedesktop.org/show_bug.cgi?id=90963 References: https://bugs.freedesktop.org/show_bug.cgi?id=88124 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude <lyude@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003142211.860-1-jani.nikula@intel.com
-
- 04 Oct, 2017 25 commits
-
-
Chris Wilson authored
Use a priority stored in the context as the initial value when submitting a request. This allows us to change the default priority on a per-context basis, allowing different contexts to be favoured with GPU time at the expense of lower importance work. The user can adjust the context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive values being higher priority (they will be serviced earlier, after their dependencies have been resolved). Any prerequisite work for an execbuf will have its priority raised to match the new request as required. Normal users can specify any value in the range of -1023 to 0 [default], i.e. they can reduce the priority of their workloads (and temporarily boost it back to normal if so desired). Privileged users can specify any value in the range of -1023 to 1023, [default is 0], i.e. they can raise their priority above all overs and so potentially starve the system. Note that the existing schedulers are not fair, nor load balancing, the execution is strictly by priority on a first-come, first-served basis, and the driver may choose to boost some requests above the range available to users. This priority was originally based around nice(2), but evolved to allow clients to adjust their priority within a small range, and allow for a privileged high priority range. For example, this can be used to implement EGL_IMG_context_priority https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of the context to be created. This attribute is a hint, as an implementation may not support multiple contexts at some priority levels and system policy may limit access to high priority contexts to appropriate system privilege level. The default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is EGL_CONTEXT_PRIORITY_MEDIUM_IMG." so we can map PRIORITY_HIGH -> 1023 [privileged, will failback to 0] PRIORITY_MED -> 0 [default] PRIORITY_LOW -> -1023 They also map onto the priorities used by VkQueue (and a VkQueue is essentially a timeline, our i915_gem_context under full-ppgtt). v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/ v3: Report min/max user priorities as defines in the uapi, and rebase internal priorities on the exposed values. Testcase: igt/gem_exec_schedule Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk
-
Chris Wilson authored
When we write to ELSP, it triggers a context preemption at the earliest arbitration point (3DPRIMITIVE, some PIPECONTROLs, a few other operations and the explicit MI_ARB_CHECK). If this is to the same context, it triggers a LITE_RESTORE where the RING_TAIL is merely updated (used currently to chain requests from the same context together, avoiding bubbles). However, if it is to a different context, a full context-switch is performed and it will start to execute the new context saving the image of the old for later execution. Previously we avoided preemption by only submitting a new context when the old was idle. But now we wish embrace it, and if the new request has a higher priority than the currently executing request, we write to the ELSP regardless, thus triggering preemption, but we tell the GPU to switch to our special preemption context (not the target). In the context-switch interrupt handler, we know that the previous contexts have finished execution and so can unwind all the incomplete requests and compute the new highest priority request to execute. It would be feasible to avoid the switch-to-idle intermediate by programming the ELSP with the target context. The difficulty is in tracking which request that should be whilst maintaining the dependency change, the error comes in with coalesced requests. As we only track the most recent request and its priority, we may run into the issue of being tricked in preempting a high priority request that was followed by a low priority request from the same context (e.g. for PI); worse still that earlier request may be our own dependency and the order then broken by preemption. By injecting the switch-to-idle and then recomputing the priority queue, we avoid the issue with tracking in-flight coalesced requests. Having tried the preempt-to-busy approach, and failed to find a way around the coalesced priority issue, Michal's original proposal to inject an idle context (based on handling GuC preemption) succeeds. The current heuristic for deciding when to preempt are only if the new request is of higher priority, and has the privileged priority of greater than 0. Note that the scheduler remains unfair! v2: Disable for gen8 (bdw/bsw) as we need additional w/a for GPGPU. Since, the feature is now conditional and not always available when we have a scheduler, make it known via the HAS_SCHEDULER GETPARAM (now a capability mask). v3: Stylistic tweaks. v4: Appease Joonas with a snippet of kerneldoc, only to fuel to fire of the preempt vs preempting debate. Suggested-by: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-8-chris@chris-wilson.co.uk
-
Chris Wilson authored
In the next few patches, we wish to enable different features for the scheduler, some which may subtlety change ABI (e.g. allow requests to be reordered under different circumstances). So we need to make sure userspace is cognizant of the changes (if they care), by which we employ the usual method of a GETPARAM. We already have an I915_PARAM_HAS_SCHEDULER (which notes the existing ability to reorder requests to avoid bubbles), and now we wish to extend that to be a bitmask to describe the different capabilities implemented. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-7-chris@chris-wilson.co.uk
-
Chris Wilson authored
With preemption, we will want to "unsubmit" a request, taking it back from the hw and returning it to the priority sorted execution list. In order to know where to insert it into that list, we need to remember its adjust priority (which may change even as it was being executed). This also affects reset for execlists as we are now unsubmitting the requests following the reset (rather than directly writing the ELSP for the inflight contexts). This turns reset into an accidental preemption point, as after the reset we may choose a different pair of contexts to submit to hw. GuC is not updated as this series doesn't add preemption to the GuC submission, and so it can keep benefiting from the early pruning of the DFS inside execlists_schedule() for a little longer. We also need to find a way of reducing the cost of that DFS... v2: Include priority in error-state Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-6-chris@chris-wilson.co.uk
-
Chris Wilson authored
Move the re-enabling of MI arbitration from a per-bb w/a buffer to the emission of the batch buffer itself. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
Add another perma-pinned context for using for preemption at any time. We cannot just reuse the existing kernel context, as first and foremost we need to ensure that we can preempt the kernel context itself, so require a distinct context id. Similar to the kernel context, we may want to interrupt execution and switch to the preempt context at any time, and so it needs to be permanently pinned and available. To compensate for yet another permanent allocation, we shrink the existing context and the new context by reducing their ringbuffer to the minimum. v2: Assert that we never allocate a request from the preemption context. v3: Limit perma-pin to engines that may preempt. v4: Onion cleanup for early driver death v5: Onion ordering in main driver cleanup as well. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
Let the listener know that the context we just scheduled out was not complete, and will be scheduled back in at a later point. v2: Handle CONTEXT_STATUS_PREEMPTED in gvt by aliasing it to CONTEXT_STATUS_OUT for the moment, gvt can expand upon the difference later. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Zhenyu Wang" <zhenyuw@linux.intel.com> Cc: "Wang, Zhi A" <zhi.a.wang@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-3-chris@chris-wilson.co.uk
-
Michał Winiarski authored
Supporting fine-granularity preemption levels may require changes in userspace batch buffer programming. Therefore, we need to fallback to safe default values, rather that use hardware defaults. Userspace is still able to enable fine-granularity, since we're whitelisting the register controlling it in WaEnablePreemptionGranularityControlByUMD. v2: Extend w/a to cover Cannonlake v3: Fix commentary to include both fake w/a names. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-2-chris@chris-wilson.co.uk
-
Jeff McGee authored
The WA applies to all production Gen9 and requires both enabling and whitelisting of the per-context preemption control register. v2: Extend to Cannonlake. Signed-off-by: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-1-chris@chris-wilson.co.uk
-
Michal Wajdeczko authored
We don't want to make aggregate uc functions to be too detailed. This will also make future patch easier. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-7-michal.wajdeczko@intel.com
-
Michal Wajdeczko authored
We want to keep each uC specific code in separate files. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-6-michal.wajdeczko@intel.com
-
Michal Wajdeczko authored
This is a prerequisite to unblock next steps. v2: correct include order (Joonas) v3: use common function prefix (Joonas) add kerneldoc (Michal) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-5-michal.wajdeczko@intel.com
-
Sagar Arun Kamble authored
This patch adds new function intel_uc_init_mmio which will initialize MMIO access related variables prior to uc load/init. v2: Removed unnecessary export of guc_send_init_regs. Created intel_uc_init_mmio that currently wraps guc_init_send_regs. (Michal) v3 (Michal): add kerneldoc (Joonas) Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-4-michal.wajdeczko@intel.com
-
Michal Wajdeczko authored
We don't need it here. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-3-michal.wajdeczko@intel.com
-
Michal Wajdeczko authored
We're trying to resolve inter-header dependencies. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-2-michal.wajdeczko@intel.com
-
Chris Wilson authored
trace_i915_gem_evict_everything and trace_i915_gem_ring_flush stopped being used when their parent functions were removed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
The tracepoints need some tlc, in particular we've neglected to update them for the 64b era. v2: Prefix hexadecimal output with 0x. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-1-chris@chris-wilson.co.ukReviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Chris Wilson authored
These macros are of dubious merit when coupled with the per-context w/a set. Instead of tweaking the value in the context, they tweak the value based on the mmio at the time of recording; they are almost by definition not per-context! Having removed the last users, remove the macros to avoid temptation in the future. v2: Kill WA_WRITE as well (now also unused). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004124153.14142-2-chris@chris-wilson.co.ukReviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
Chris Wilson authored
Looking at gem_workarounds shows us that MMCD_MISC_CTRL is not restored following a suspend-resume cycle. This implies that MMCD_MISC_CTRL is not stored in the context, but is an ordinary register w/a that we need to restore during init_hw. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004124153.14142-1-chris@chris-wilson.co.ukReviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
-
Oscar Mateo authored
RING_FORCE_TO_NONPRIV registers do not live in the logical context. They are simply global privileged MMIO registers that happen to be powercontext saved and restored (meaning only they can survive RC6). Therefore, there is absolutely no need to save them so that they can be restored everytime we create a new logical context. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1506638439-6903-1-git-send-email-oscar.mateo@intel.comAcked-by: Michel Thierry <michel.thierry@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> #bxt Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
-
Maarten Lankhorst authored
This has been unused since commit afa8ce5b ("drm/i915: Nuke legacy flip queueing code"). Changes since v1: - Rebase on top of all the changes to modparams. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> \o/-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004094416.31306-1-maarten.lankhorst@linux.intel.com
-
Imre Deak authored
According to BSpec GLK like BXT needs to ignore the idle state of cores before starting the DMC firmware's DC state handler. Fixes: dbb28b5c ("drm/i915/DMC/GLK: Load DMC on GLK") Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-2-imre.deak@intel.com
-
Imre Deak authored
The DMC firmware program memory is lost after S3/S4 system suspend, so we need to reprogram it during resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103070 Fixes: cebfcead ("drm/i915/DMC/CNL: Load DMC on CNL") Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-1-imre.deak@intel.com
-
Maarten Lankhorst authored
In legacy cursor updates we need the extra vblank waits if we update watermarks, and then we cannot skip the vblank for cursors. This is why for < gen9 we disabled the cursor fastpath, but we can skip the wait when post vblank watermarks are untouched. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170919121419.13708-2-maarten.lankhorst@linux.intel.com
-
Maarten Lankhorst authored
Commit b44d5c0c ("drm/i915: Always wait for flip_done, v2.") removed the call to wait_for_vblanks and replaced it with flip_done. Unfortunately legacy_cursor_update was unset too late, and the replacement call drm_atomic_helper_wait_for_flip_done() was a noop. Make sure that its unset before setup_commit() is called to fix this issue. Changes since v1: - Force vblank wait for watermarks not yet converted to atomic too. (Ville) - Use for_each_new_intel_crtc_in_state. (Ville) Changes since v2: - Move the optimization to a separate commit. (Ville) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: b44d5c0c ("drm/i915: Always wait for flip_done, v2.") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102675 Testcase: kms_cursor_crc Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reported-by: Marta Löfstedt <marta.lofstedt@intel.com> Cc: Marta Löfstedt <marta.lofstedt@intel.com> Tested-by: Marta Löfstedt <marta.lofstedt@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170919121419.13708-1-maarten.lankhorst@linux.intel.com
-
- 03 Oct, 2017 5 commits
-
-
Rodrigo Vivi authored
Let's organize this in a way that it gets more obvious when looking to the platform colors and in a easier way to get inherited. v2: Add comma at the end (Jani), when possible. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-3-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
As Chris noticed the current organization is confusing and inheritance is not clear. So, let's split it in GEN<n>_FEATURES <cdn>_PLATFORM where new GEN inherit features from previous gens and Platforms only use gen features plus what ever is specific for that platform and shouldn't be passed on. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-2-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
According to Spec for SKL+: "Isochronous Priority Control. If enabled, Display sends demoted requests once the transition watermark is reached. If transition watermark is not enabled, Display sends demoted requests when the display buffer is full." The commit 'e57f1c02 ("drm/i915/gen9+: Add has_ipc flag in device info structure")' introduced that as gen9+ but missing many SKL Skus. I believe the reason for that is Spec also mentions workarounds for SKL-ALL: "IPC (Isoch Priority Control) may cause underflows WA: Do not enable IPC in register ARB_CTL2" It seems lame to add the feature and forever disable it, but it will avoid a mistake of enabling it when we are reorganizing the feature definitions on i915_pci.c later. It will also allow us to probably extend that workaround for other platforms. Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-1-rodrigo.vivi@intel.com
-
Imre Deak authored
The common lane power down flag of a DPIO PHY has a funky semantic: after the initial enabling of the PHY (so from a disabled state) this flag will be clear. It will be set only after the PHY will be used for the first time (for instance due to enabling the corresponding pipe) and then become unused (due to disabling the pipe). During the initial PHY enablement we don't know which of the above phases we are in, so move the check for the flag where this is known, the HW readout code. This is where the rest of lane power down status checks are done anyway. This fixes at least a problem on GLK where after module reloading, the common lane power down flag of PHY1 is set, but the PHY is actually powered-on and properly set up. The GRC readout code for other PHYs will hence think that PHY1 is not powered initially and disable it after the GRC readout. This will cause the AUX power well related to PHY1 to get disabled in a stuck state, timing out when we try to enable it later. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Fixes: e93da0a0 ("drm/i915/bxt: Sanitiy check the PHY lane power down status") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171002135307.26117-1-imre.deak@intel.com
-
Imre Deak authored
On GLK and CNL enabling a pipe with its pipe scaler enabled will result in a FIFO underrun. This happens only once after driver loading or system/runtime resume, more specifically after power well 1 gets enabled; subsequent modesets seem to be free of underruns. The BSpec workaround for this is to disable the pipe scaler clock gating for the duration of modeset. Based on my tests disabling clock gating must be done before enabling pipe scaling and we can re-enable it after the pipe is enabled and one vblank has passed. For consistency I also checked if plane scaling would cause the same problem, but that doesn't seem to trigger this problem. The patch is based on an earlier version from Ander. v2 (Rodrigo): - Set also CLKGATE_DIS_PSL bits 8 and 9. - Add also the BSpec workaround ID. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100302Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171002075557.32615-1-imre.deak@intel.com
-
- 02 Oct, 2017 3 commits
-
-
David Weinehall authored
While testing Jim Bride's latest batch of PSR patches I noticed that gen9lp doesn't include the has_psr flag, and that our GLK system thus reported PSR as unsupported. This patch simply adds has_psr. Signed-off-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170808100952.26448-1-david.weinehall@linux.intel.com
-
Imre Deak authored
Only init / reset the display interrupts during power well enabling / disabling if the i915 interrupts are enabled. So far we did the init / reset during driver loading / resuming too, where initialization / enabling of the i915 interrupts happens only at a later point. This didn't cause a problem due to GEN8_MASTER_IRQ_CONTROL being cleared, but triggered gen3_assert_iir_is_zero() in GEN8_IRQ_INIT_NDX(). References: https://bugs.freedesktop.org/show_bug.cgi?id=102988 Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170928100624.15533-1-imre.deak@intel.com
-
Imre Deak authored
Atm, on GEN9 big core platforms before saving the hibernation image we uninitialize the display, disabling power wells manually, while before restoring the image we keep things powered (letting HW/DMC power down things as needed). The state mismatch will trigger the following error: DC state mismatch (0x0 -> 0x2) While the restore handler knows how to initialize the display from an unknown state (due to a different loader kernel or not having i915 loaded in the loader kernel) we should still use the same state for consistency before image saving and restoring. Do this by uniniting the display before restoring the image too. Bugzilla: https://bugs.freedesktop.org/attachment.cgi?id=133376Reported-and-tested-by: Wang Wendy <wendy.wang@intel.com> Reported-and-tested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Wang Wendy <wendy.wang@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170816144607.9935-1-imre.deak@intel.com
-
- 29 Sep, 2017 2 commits
-
-
Michał Winiarski authored
Avoid the repeated rbtree lookup for each request as we unwind them by tracking the last priolist. v2: Fix up my unhelpful suggestion of using default_priolist. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
We use INT_MIN to denote the priority of a request that has not been submitted to the scheduler; we treat INT_MIN as an invalid priority and initialise the request to it. Give the value a name so it stands out. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-3-chris@chris-wilson.co.ukReviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com
-