An error occurred fetching the project authors.
- 14 Jul, 2008 22 commits
-
-
Wolfram Sang authored
Fix errorcode to be more descriptive when ioremap fails. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Wolfram Sang authored
Give a more concrete error code, when the bus is not idle. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Many PC SMBus host controller drivers don't properly handle the case where they are requested to achieve a transaction they do not support. Update them so that the consistently print a warning message and return a single error value in this case. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
The i2c-piix4 driver was used recently as a model to write a new SMBus host controller driver and this made me realize that the code of this old driver wasn't exactly good. So, here are many cleanups and minor fixes to this driver, so that these minor mistakes aren't duplicated again: * Delete unused structure. * Delete needless forward function declaration. * Properly announce the SMBus host controller as we find it. * Spell it SMBus not SMB. * Return -EBUSY instead of -ENODEV when the I/O region is already in use. * Drop useless masks on the 7-bit address and the R/W bit. * Reject block transaction requests with an invalid block length. * Check and report block transaction replies with an invalid block length. * Delete a useless comment. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
David Brownell authored
Tighten error paths used by various i2c adapters (mostly x86) so they return real fault/errno codes instead of a "-1" (which is most often interpreted as "-EPERM"). Build tested, with eyeball review. One minor initial goal is to have adapters consistently return the code "-ENXIO" when addressing a device doesn't get an ACK response, at least in the probe paths where they are already good at stifling related logspam. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
David Brownell authored
Defend the i2c refcount calls against NULL pointers, as is important (and conventional) for such calls. Note that none of the current callers of i2c_use_client() use its return value. [JD: I hate this but apparently all the other subsystems do it so...] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
David Brownell authored
Provide kerneldoc for most of the I2C and SMBus I/O calls. Add a comment summarizing some fault reporting issues which affect the ability to provide clean fault reports through I2C master transfer calls. (Making it hard to precisely specify their return values...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
That function is actually named i2c_smbus_xfer. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Function i2c_smbus_write_quick has no users left, so we can delete it. Also update the list of these helper functions which are gone but could be added back if needed. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
The list of I2C/SMBus bus drivers is growing and it is sometimes difficult for the users to figure out what drivers they should enable. By grouping the drivers by type, I hope to make the selection easier. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
David Brownell authored
More updates to the I2C stack's fault reporting: make the core stop returning "-1" (usually "-EPERM") for all faults. Instead, pass lower level fault code up the stack, or return some appropriate errno. This patch happens to touch almost exclusively SMBus calls. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
i2c-core doesn't use seq files, so doesn't need to include <linux/seq_file.h>. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
David Brownell authored
Create Documentation/i2c/fault-codes to help standardize fault/error code usage in the I2C stack. It turns out that returning -1 (-EPERM) for everything was not at all helpful. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Mike Frysinger authored
Since only a few Blackfins lack TWI, just list them in a depends statement. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Adrian Bunk authored
This patch contains the scheduled removal of i2c-i810, i2c-prosavage and i2c-savage4. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Just like the Tyan S4882, the S4985 uses a multiplexer to give access to all 16 memory module SPD EEPROMs. This specific i2c-nforce2-s4985 driver adds support for this. It is heavily based on the older i2c-amd756-s4882 driver. As more mainboards will use multiplexer chips, we will have to find a way to support them without having to write a new specfic driver for each. The recent changes to the i2c subsystem should help us, and the new gpio subsystem might help, too. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Troy Kisky authored
If an interrupt happens before an I2c master read/write, complete is called on uninitialized structure. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Troy Kisky authored
If wait_for_completion_interruptible_timeout exits due to a signal, the i2c bus was locking up. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Troy Kisky authored
Interrupts are enabled at the point where the DAVINCI_I2C_IVR_REG is read, so unless an interrupt happened just at that moment, no interrupt would be pending. Even though documentation implies you should do this, I see no reason. If slave support is added, this read would cause a hard to reproduce bug. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Troy Kisky authored
Previously the dev_dbg only printed if no error. Printing also on an error is more useful Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Troy Kisky authored
Ensure psc value gives a clock between 7-12 MHz Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Dave Young authored
Use class_for_each_device for iteration. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
- 13 Jul, 2008 6 commits
-
-
Linus Torvalds authored
-
Li Zefan authored
# cat devices.list c 1:3 r # echo 'c 1:3 w' > sub/devices.allow # cat sub/devices.list c 1:3 w As illustrated, the parent group has no write permission to /dev/null, so it's child should not be allowed to add this write permission. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Li Zefan authored
# echo "b $((0x7fffffff)):$((0x80000000)) rwm" > devices.allow # cat devices.list b 214748364:-21474836 rwm though a major/minor number of 0x800000000 is meaningless, we should not cast it to a negative value. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: cpusets, hotplug, scheduler: fix scheduler domain breakage
-
Dmitry Adamushko authored
Commit f18f982a ("sched: CPU hotplug events must not destroy scheduler domains created by the cpusets") introduced a hotplug-related problem as described below: Upon CPU_DOWN_PREPARE, update_sched_domains() -> detach_destroy_domains(&cpu_online_map) does the following: /* * Force a reinitialization of the sched domains hierarchy. The domains * and groups cannot be updated in place without racing with the balancing * code, so we temporarily attach all running cpus to the NULL domain * which will prevent rebalancing while the sched domains are recalculated. */ The sched-domains should be rebuilt when a CPU_DOWN ops. has been completed, effectively either upon CPU_DEAD{_FROZEN} (upon success) or CPU_DOWN_FAILED{_FROZEN} (upon failure -- restore the things to their initial state). That's what update_sched_domains() also does but only for !CPUSETS case. With f18f982a, sched-domains' reinitialization is delegated to CPUSETS code: cpuset_handle_cpuhp() -> common_cpu_mem_hotplug_unplug() -> rebuild_sched_domains() Being called for CPU_UP_PREPARE and if its callback is called after update_sched_domains()), it just negates all the work done by update_sched_domains() -- i.e. a soon-to-be-offline cpu is included in the sched-domains and that makes it visible for the load-balancer while the CPU_DOWN ops. is in progress. __migrate_live_tasks() moves the tasks off a 'dead' cpu (it's already "offline" when this function is called). try_to_wake_up() is called for one of these tasks from another CPU -> the load-balancer (wake_idle()) picks up a "dead" CPU and places the task on it. Then e.g. BUG_ON(rq->nr_running) detects this a bit later -> oops. Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Tested-by: Vegard Nossum <vegard.nossum@gmail.com> Cc: Paul Menage <menage@google.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: miaox@cn.fujitsu.com Cc: rostedt@goodmis.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 12 Jul, 2008 12 commits
-
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix ldt limit for 64 bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] bsg: fix oops on remove [SCSI] fusion: default MSI to disabled for SPI and FC controllers [SCSI] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices [SCSI] mptspi: fix oops in mptspi_dv_renegotiate_work() [SCSI] erase invalid data returned by device
-
Jeff Layton authored
The current definition of wksidarr works fine on little endian arches (since cpu_to_le32 is a no-op there), but on big-endian arches, it fails to compile with this error: error: braced-group within expression allowed only inside a function The problem is that this static declaration has cpu_to_le32 embedded within it, and that expands into a function macro. We need to use __constant_cpu_to_le32() instead. Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: Steven French <sfrench@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Layton authored
Try this: mount a share with unix extensions create a file on it umount the share You'll get the following message in the ring buffer: VFS: Busy inodes after unmount of cifs. Self-destruct in 5 seconds. Have a nice day... ...the problem is that cifs_get_inode_info_unix is creating and hashing a new inode even when it's going to return error anyway. The first lookup when creating a file returns an error so we end up leaking this inode before we do the actual create. This appears to be a regression caused by commit 0e4bbde9. The following patch seems to fix it for me, and fixes a minor formatting nit as well. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Fix FRV irqs_disabled() to return an int, not an unsigned long to avoid this warning: kernel/sched.c: In function '__might_sleep': kernel/sched.c:8198: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Robert Richter authored
Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: John Levon <levon@movementarian.org> Cc: Maynard Johnson <maynardj@us.ibm.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com> Cc: Jason Yeh <jason.yeh@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jon Smirl authored
Add the rtc8564 chip entry Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alessandro Zummo authored
Fix chip naming from fm3031-rtc to fm3031 Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Sergey Lapin <slapin@ossfans.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andres Salomon authored
Cortland Setlow pointed out a bug in ov7670.c where the result from ov7670_read() was just being checked for !0, rather than <0. This made me realize that ov7670_read's semantics were rather confusing; it both fills in 'value' with the result, and returns it. This is goes against general kernel convention; so rather than fixing callers, let's fix the function. This makes ov7670_read return <0 in the case of an error, and 0 upon success. Thus, code like: res = ov7670_read(...); if (!res) goto error; ..will work properly. Signed-off-by: Cortland Setlow <csetlow@tower-research.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric W. Biederman authored
I had 8250.nr_uarts=16 in the boot line of a test kernel and I had a weird mysterious crash in sysfs. After taking an in-depth look I realized that CONFIG_SERIAL_8250_NR_UARTS was set to 4 and I was walking off the end of the serial8250_ports array. Ouch!!! Don't let this happen to someone else. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Alan Cox <alan@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jaya Kumar authored
This patch is a bugfix for how defio handles multiple processes manipulating the same framebuffer. Thanks to Bernard Blackham for identifying this bug. It occurs when two applications mmap the same framebuffer and concurrently write to the same page. Normally, this doesn't occur since only a single process mmaps the framebuffer. The symptom of the bug is that the mapping applications will hang. The cause is that defio incorrectly tries to add the same page twice to the pagelist. The solution I have is to walk the pagelist and check for a duplicate before adding. Since I needed to walk the pagelist, I now also keep the pagelist in sorted order. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Bernard Blackham <bernard@largestprime.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Darren Jenkins authored
Coverity CID: 1356 RESOURCE_LEAK I found a very old patch for this that was Acked but did not get applied https://lists.linux-foundation.org/pipermail/kernel-janitors/2006-September/016362.html There looks to be a small leak in isdn_writebuf_stub() in isdn_common.c, when copy_from_user() returns an un-copied data length (length != 0). The below patch should be a minimally invasive fix. Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom> Acked-by: Karsten Keil <kkeil@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-