An error occurred fetching the project authors.
- 07 Oct, 2009 13 commits
-
-
Luis R. Rodriguez authored
The same code was being implemented on reset for setting the bssidmask, instead just use the already provided helper. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
ath9k_hw_setpower_nolock --> ath9k_hw_setpower() ath9k_hw_setpower() --> ath9k_setpower() Also change the param for ath9k_setpower() to pass the ath_softc. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
And we make it static. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
ath9k_hw_setpower() is a core driver helper with locking protection. Locking protection should be left to the driver core, not the hw code. Hardware code no longer contends for locking when it needs to wake up the chip or put it to sleep. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
These are driver core helpers. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
When the TSF is reset power save state is disabled and then restored. The helpers to disable power save and restore it use a lock provided by the driver core. Move the callers of the helpers outside of the hw code. We reset the TSF when mac80211 tells us and on the beacon.c helper ath9k_hw_beaconinit() when it is made explicitly required. Add a helper on beacon.c which will deal with ps awake/restore if we need to reset the TSF upon ath9k_hw_beaconinit(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
Also just pass the ath_hw as the parameter. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
btcoex_scheme is already part of a btcoex struct, its implied this is btcoex related. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
Whether or not bluetooth coex has been enabled is a hardware state and only the hardware helpers will be able to set this. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
Since we now access it via the ath_hw declare the ath_hw pointer at the header of some routines and se it. ath9k.h no longer needs to access btcoex.h and to adjust for this move ath_btcoex_set_weight() into btcoex.h and instead give main.c a helper for setting initial values upon drv_start() Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
DPRINTF() is used in hw specific related code, as such ensure we don't rely on the private driver core ath_softc struct when calling it. Drivers can then implement their own DPRINTF() as they see fit. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 23 Sep, 2009 8 commits
-
-
Vivek Natarajan authored
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vivek Natarajan authored
Autosleep needs to be disabled for AR9287 chipsets also. Since autosleep is not used for any of the currently supported chipsets, disable it by default and can be enabled if needed for any of the future chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vivek Natarajan authored
The commit "ath9k: Do an AHB reset before doing RTC reset" fixed RTC reset issue for AR9280 2.0 chipsets and above. The fix is valid for all AR9280 chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
AR9280 requires a full reset during channel change and HW reset. Currently, a fast channel change is done. This patch fixes this bug. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
NF value may be incorrect when we read it just after the chip has gone through a full sleep mode. Reading incorrect NF values affects RX throughput. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Setting bit 20 and 25 of 0x8344 can cause occasional rx data corruption, clear them to fix this issue. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith authored
For chips requiring RTC reset, TSF has to be restored after power on reset. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vivek Natarajan authored
* Disable L1 state ONLY when device is in D3 mode. * Clear bit 22 of register 0x4004. * Handle power on/off properly Not setting the workarounds properly resulted in the disappearance of the card in certain cases. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 09 Sep, 2009 4 commits
-
-
Vasanthakumar Thiagarajan authored
Oops, a stupid mistake in the original patch which adds coex 3-wire support. Bluetooth priority gpio needs to be gpio 7. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 08 Sep, 2009 1 commit
-
-
Sujith authored
BAR frames have to be sent to mac80211 only if the current channel is HT. Also, move the macro to enum ath9k_rx_filter. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 31 Aug, 2009 1 commit
-
-
Vasanthakumar Thiagarajan authored
Doing an RTC reset when DMA is active may corrupt memory, make sure no DMA is active at this moment by doing an AHB reset. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 28 Aug, 2009 8 commits
-
-
Vasanthakumar Thiagarajan authored
This patch adds 3-wire bluetooth coex support for AR9285. This support can be enabled through btcoex_enable modparam. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
We don't need a hw cap bit for btcoex anymore as btcoex scheme type is enough to do this. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Also define macros for wlanactive and btactive (5 & 6) gpios. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Make sure btcoex register configured with appropriate values after it is initialized with the default values from initvals.h during reset. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
This function currently does initialization + enable the btcoex support. Split it into two logical functions which does the above operations separately. Btcoex initialization is done during attach time and enabling this feature is done in start(). Also, add code to disable btcoex support in stop(). Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 20 Aug, 2009 4 commits
-
-
Luis R. Rodriguez authored
This moves the shared regulatory structure into the common structure. We will use this ongoing for common data. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vivek Natarajan authored
Enable AsyncFIFO and AGGWEP for AR9287_12 and later revisions only. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vivek Natarajan authored
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vivek Natarajan authored
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 14 Aug, 2009 1 commit
-
-
Sujith authored
diversity_control and antenna_switch_swap are already present in ath9k_ops_config. Remove duplicate occurrences in ath_hw. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-