- 27 Mar, 2018 3 commits
-
-
Chris Wilson authored
We were relying on the uncached reads when processing the CSB to provide ourselves with the serialisation with the interrupt handler (so we could detect new interrupts in the middle of processing the old one). However, in commit 767a983a ("drm/i915/execlists: Read the context-status HEAD from the HWSP") those uncached reads were eliminated (on one path at least) and along with them our serialisation. The result is that we would very rarely miss notification of a new interrupt and leave a context-switch unprocessed, hanging the GPU. Fixes: 767a983a ("drm/i915/execlists: Read the context-status HEAD from the HWSP") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180321091027.21034-1-chris@chris-wilson.co.uk (cherry picked from commit 9153e6b7) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
If the GPU is stuck waiting for an event or for a semaphore, we need to reset the GPU in order to recover. We have to tell the reset routine which engines we want reset, but we were still using the old interface and declaring it as "not-fatal". Fixes: 14b730fc ("drm/i915/tdr: Prepare error handler to accept mask of hung engines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-1-chris@chris-wilson.co.uk (cherry picked from commit ca98317b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Dhinakaran Pandiyan authored
If bios sets up an MST output and hardware state readout code sees this is an SST configuration, when disabling the encoder we end up calling ->post_disable_dp() hook instead of the MST version. Consequently, we write to the DP_SET_POWER dpcd to set it D3 state. Further along when we try enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up the MST hub. This results in continuous link training failures which keep the system busy delaying boot. We could identify bios MST boot discrepancy and handle it accordingly but a simple way to solve this is to write to the DP_SET_POWER dpcd for MST too. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: 5ea2355a ("drm/i915/mst: Use MST sideband message transactions for dpms control") Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com (cherry picked from commit ad260ab3) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
- 26 Mar, 2018 1 commit
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Last pull for 4.17. Highlights: - Vega12 support - A few more bug fixes and cleanups for powerplay * 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (77 commits) drm/amd/pp: clean header file hwmgr.h drm/amd/pp: use mlck_table.count for array loop index limit drm/amdgpu: Add an ATPX quirk for hybrid laptop drm/amdgpu: fix spelling mistake: "asssert" -> "assert" drm/amd/pp: Add new asic support in pp_psm.c drm/amd/pp: Clean up powerplay code on Vega12 drm/amd/pp: Add smu irq handlers for legacy asics drm/amd/pp: Fix set wrong temperature range on smu7 drm/amdgpu: Don't change preferred domian when fallback GTT v5 drm/amdgpu: Fix NULL ptr on driver unload due to init failure. drm/amdgpu: fix "mitigate workaround for i915" drm/amd/pp: Add smu irq handlers in sw_init instand of hw_init drm/amd/pp: Refine register_thermal_interrupt function drm/amdgpu: Remove wrapper layer of cgs irq handling drm/amd/powerplay: Return per DPM level clock drm/amd/powerplay: Remove the SOC floor voltage setting drm/amdgpu: no job timeout setting on compute queues drm/amdgpu: add vega12 pci ids (v2) drm/amd/powerplay: add the hw manager for vega12 (v4) drm/amd/powerplay: add the smu manager for vega12 (v4) ...
-
- 23 Mar, 2018 3 commits
-
-
Rex Zhu authored
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Colin Ian King authored
v2: use temporaries to trivially reduces object size. The for-loops process data in the mclk_table but use slck_table.count as the loop index limit. I believe these are cut-n-paste errors from the previous almost identical loops as indicated by static analysis. Fix these. Detected by CoverityScan, CID#1466001 ("Copy-paste error") Fixes: 5d97cf39 ("drm/amd/pp: Add and initialize OD_dpm_table for CI/VI.") Fixes: 5e4d4fbe ("drm/amd/pp: Implement edit_dpm_table on smu7") Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
_PR3 doesn't seem to work properly, use ATPX instead. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104064Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 22 Mar, 2018 30 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2018-03-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next GVT regression fix that caused guest VM GPU hang. Fix for race conditions in declaring GPU wedged (hit in CI). * tag 'drm-intel-next-fixes-2018-03-22' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/gvt: force to set all context control bits from guest drm/i915/gvt: Update PDPs after a vGPU mm object is pinned. drm/i915/gvt: Invalidate vGPU PPGTT mm objects during a vGPU reset. drm/i915/kvmgt: Handle kzalloc failure drm/i915/gvt: fix spelling mistake: "destoried" -> "destroyed" drm/i915/gvt: Remove reduntant printing of untracked mmio drm/i915/pmu: Work around compiler warnings on some kernel configs drm/i915: Only call tasklet_kill() on the first prepare_reset drm/i915: Wrap engine->schedule in RCU locks for set-wedge protection drm/i915/icl: do not save DDI A/E sharing bit for ICL
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
A relative large set of various improvements for vmwgfx. Some of them have been around for a while, some are relatively new, but functionality should have been tested in our standalone repo. * 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Bump version patchlevel and date drm/vmwgfx: use monotonic event timestamps drm/vmwgfx: Unpin the screen object backup buffer when not used drm/vmwgfx: Stricter count of legacy surface device resources drm/vmwgfx: Use kasprintf drm/vmwgfx: Get rid of the device-private suspended member drm/vmwgfx: Improve on hibernation drm/vmwgfx: Avoid pinning fbdev framebuffers drm/vmwgfx: Fix multiple command buffer context use drm/vmwgfx: Use the cpu blit utility for framebuffer to screen target blits drm/vmwgfx: Add a cpu blit utility that can be used for page-backed bos drm/ttm: Export the ttm_k[un]map_atomic_prot API. drm/ttm: Clean up kmap_atomic_prot selection code drm/vmwgfx: Cursor update fixes drm/vmwgfx: Send the correct nonblock option for atomic_commit drm/vmwgfx: Move the stdu vblank event to atomic function drm/vmwgfx: Move screen object page flip to atomic function drm/vmwgfx: Remove drm_crtc_arm_vblank_event from atomic flush drm/vmwgfx: Move surface copy cmd to atomic function drm/vmwgfx: Avoid iterating over display unit if crtc is available
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
Changes this time mostly come down to: - hook up the DRM GPU scheduler - prep work for GC7000L support, to be completed in the next cycle * 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (22 commits) drm/etnaviv: bump HW job limit to 4 drm/etnaviv: etnaviv_sched: Staticize functions when possible drm/etnaviv: add PTA handling to MMUv2 drm/etnaviv: add function to load the initial PTA state drm/etnaviv: handle security states drm/etnaviv: add security handling mode enum drm/etnaviv: add hardware database drm/etnaviv: add more minor features fields drm/etnaviv: update hardware headers from rnndb drm/etnaviv: add support for slave interface clock drm/etnaviv: split out and optimize MMU fault dumping drm/etnaviv: remove the need for a gpu-subsystem DT node dt-bindings: etnaviv: add slave interface clock drm/etnaviv: use correct format specifier for size_t drm/etnaviv: replace hangcheck with scheduler timeout drm/etnaviv: lock BOs after all other submit work is done drm/etnaviv: move dependency handling to scheduler drm/etnaviv: hook up DRM GPU scheduler drm/etnaviv: track fences by IDR instead of seqno drm/etnaviv: add missing major features field to debugfs ...
-
Colin Ian King authored
Trivial fix to spelling mistake in pr_err error message text Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
In new asics(vega12), no power state management in driver, So no need to implement related callback functions. and add some ps checks in pp_psm.c Revert "drm/amd/powerplay: add new pp_psm infrastructure for vega12 (v2)" This reverts commit 7d1a63f3aa331b853e41f92d0e7890ed31de8c13. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Fix the issue thermal irq was always triggered as GPU under temperature range detected The low temp in default thermal policy was set to -273. so need to use int type for the low temp. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Chunming Zhou authored
v2: add sanity checking v3: make code open v4: also handle visible to invisible fallback v5: Since two fallback cases, re-use goto retry Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Thomas Hellstrom authored
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
Arnd Bergmann authored
DRM_VMW_EVENT_FENCE_SIGNALED (struct drm_vmw_event_fence) and DRM_EVENT_VBLANK (struct drm_event_vblank) pass timestamps in 32-bit seconds/microseconds format. As of commit c61eef72 ("drm: add support for monotonic vblank timestamps"), other DRM drivers use monotonic times for drm_event_vblank, but vmwgfx still uses CLOCK_REALTIME for both events, which suffers from the y2038/y2106 overflow as well as time jumps. For consistency, this changes vmwgfx to use ktime_get_ts64 as well, which solves those problems and avoids the deprecated do_gettimeofday() function. This should be transparent to to user space, as long as it doesn't compare the time against the result of gettimeofday(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
Thomas Hellstrom authored
We were relying on the pinned screen object backup buffer to be destroyed when not used. But if we hold a copy of the atomic state, like when hibernating, the backup buffer might not be destroyed since it's refcounted by the atomic state. This causes us to hibernate with a buffer pinned in VRAM. Fix this by only having the buffer pinned when it is actually used by a screen object. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
-
Thomas Hellstrom authored
For legacy surfaces, they were previously registered as device resources when the driver resources were created. Since they are evictable we instead register them as device resources once they are created on the device, just like for guest-backed surfaces. This has implications during hibernation where we can't hibernate with device resources active. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
-
Himanshu Jha authored
Use kasprintf instead of combination of kmalloc and sprintf. Also, remove the local variables used for storing the string length as they are not required now. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
Thomas Hellstrom authored
It was used to early block fbdev dirty processing. Replace it with an unprotected check of the par->dirty.active field. While this might race with the vmw_fb_off() function, we do a protected check later so the race will at worst lead to grabbing and releasing a couple of locks. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
-
Thomas Hellstrom authored
Make it possible to hibernate also with masters that don't switch VT at hibernation time. We save and restore modesetting state unless fbdev is active and enabled at hibernation time. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
-
Thomas Hellstrom authored
fbdev framebuffers were previously pinned to be able to keep them mapped across updates. This commit introduces a mechanism that instead revalidates the map on each update, keeping the map cached across updates. The cached map is torn down if the underlying pages change. Typically on buffer object moves and swapouts. This should be nicer to the system when we have resource contention. Testing done: Basic fbdev functionality under Fedora 27. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
-
Thomas Hellstrom authored
The start / stop and preempt commands don't honor the context argument but rather acts on all available contexts. Also add detection for context 1 availability. Note that currently there's no driver interface for submitting buffers using the high-priority command queue (context 1). Testing done: Change the default context for command submission to 1 instead of 0, verify basic desktop functionality including faulty command injection and recovery. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
-
Thomas Hellstrom authored
This blit was previously performed using two large vmaps, one of which was teared down and remapped on each blit. Use the more resource- conserving TTM cpu blit instead. The blit is used in boundary-box computing mode which makes it possible to minimize the bounding box used in host operations. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
-
Thomas Hellstrom authored
The utility uses kmap_atomic() instead of vmapping the whole buffer object. As a result there will be more book-keeping but on some architectures this will help avoid exhausting vmalloc space and also avoid expensive TLB flushes. The blit utility also adds a provision to compute a bounding box of changed content, which is very useful to optimize presentation speed of ill-behaved applications that don't supply proper damage regions, and for page-flips. The cost of computing the bounding box is not that expensive when done in a cpu-blit utility like this. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
-
Thomas Hellstrom authored
It will be used by vmwgfx cpu blit. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Brian Paul <brianp@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
Thomas Hellstrom authored
Use helpers to perform the kmap_atomic_prot() functionality to a) Avoid in-function ifdefs that violate the kernel coding policy, b) Facilitate exporting the functionality. This commit should not change any functionality. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
Lucas Stach authored
The current limit of 2 leads to some GPU idle times, as the usual IRQ latency leads to up to 3 jobs getting signaled at once with some standard workloads. A larger HW job limit might lead to slightly worse QoS, but we accept that to not sacrifice GPU throughput in the common case. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-
Thomas Hellstrom authored
Use drm_plane_helper_check_update also for the cursor plane. Some applications, like gdm on gnome shell still uses cursor front-buffer like rendering without notifying the kernel. We do need some kind of noficiation, but work around this for now by updating the cursor image on every cursor move. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
-
Deepak Rawat authored
Page flip can be slow for vmwgfx in some cases, like need to do surface copy to different surface or waiting for IN_FENCE_FD. Enabling nonblocking commits for vmwgfx in case userspace request it. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
Deepak Rawat authored
Atomic ioctl can also send the same page flip flags as legacy ioctl. In those cases also need to send the vblank event to userspace. vmwgfx does not support flag DRM_MODE_PAGE_FLIP_ASYNC, so this flag is never expected. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
Deepak Rawat authored
The dmabuf_dirty/surface_dirty in case of screen object is moved to plane atomic update, so that page flip in atomic ioctl also works. vmwgfx does not support DRM_MODE_PAGE_FLIP_ASYNC, so this flag is never expected. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
Deepak Rawat authored
The function drm_crtc_arm_vblank_event should be used for the driver which have vblank interrupt support. In case of vmwgfx we do not have vblank interrupt. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
Deepak Rawat authored
When display surface is different than the framebuffer surface, atomic path do not copy the surface data. This commit moved the code to copy surface from legacy to atomic path. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
Deepak Rawat authored
In case of page flip there is no need to iterate over all display unit in the function "vmw_kms_helper_dirty". If crtc is available then dirty commands is performed on that crtc only. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
-
- 21 Mar, 2018 3 commits
-
-
Andrey Grodzovsky authored
Problem: When unloading due to failure amdgpu_device_fini was called twice which was leading to NULL ptr in amdgpu_irq_disable_all. Fix: Call amdgpu_device_fini only once from amdgpu_driver_unload_kms. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Mixed up exporter and importer here. E.g. while mapping the BO we need to check the importer not the exporter. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105633Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Rex Zhu authored
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-