- 25 Jul, 2008 40 commits
-
-
Sam Ravnborg authored
Move the core functionality of headers_install and headers_check to two small perl scripts. The makefile is adapted to use the perl scrip and changed to operate on all files in a directory. So if one file is changed then all files in the directory is processed. perl were chosen for the helper scripts because this is pure text processing which perl is good at and especially the headers_check.pl script are expected to see changes / new checks implmented. The speed is ~300% faster on this box. And the output generated to the screen is now down to two lines per directory (one for install, one for check) so it is easier to scroll back after a kernel build. The perl scripts has been brought to sanity by patient feedback from: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by:Sam Ravnborg <sam@ravnborg.org>
-
Sam Ravnborg authored
Move it to the top-level file to decide if we install/check the generic headers or the arch specific headers. This revealed a long standing bug where "make headers_check_all" relied on the files in asm/ for the current architecture. So make headers_check_all is now broken by this commit. In addition: o add a simpler way to detect if an arch support exporting header files. o add 'set -e;' so we error out early if make headers_check_all fails. o add sparc64 and cris to arch we do not process in make headers_*_all because: sparc64 - use sparc to export headers cris - is know seriously broken Includes suggestions from: David Woodhouse <dwmw2@infradead.org>. Signed-off-by: -
Sam Ravnborg authored
Fix the a.out.h case by setting SRCARCH and error out early in case of an error. The a.out.h case failed with the *_all targets. Signed-off-by: -
Sam Ravnborg authored
No functional changes just improved readability Signed-off-by: -
Sam Ravnborg authored
ALTARCH is no longer used by any arch(*) so drop support for this from Makefile.headerinst Dropping ALTARCH support simplifies Makefile.headerinst (*) sparc64 uses it but work is ongoing to drop it and no furter usage is planned. Signed-off-by: -
Sam Ravnborg authored
unifdef utility is fast enough to warrant that we always run the scripts through unifdef. This patch runs all headers listed with header-y and unifdef-y through unifdef. Next step is to drop unifdef-y in all Kbuild files and that can now be done in smaller steps. Signed-off-by: -
Sam Ravnborg authored
o Use lower case for local variables o Add a helper target for common targets o Use $(hdr-inst)= ... to make Make invocations simpler o Add -rR to make invocations In total this adds more lines than it removes but the benefit is better readability Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc: Wireup new syscalls Move update_mmu_cache() declaration from tlbflush.h to pgtable.h powerpc/pseries: Remove kmalloc call in handling writes to lparcfg powerpc/pseries: Update arch vector to indicate support for CMO ibmvfc: Add support for collaborative memory overcommit ibmvscsi: driver enablement for CMO ibmveth: enable driver for CMO ibmveth: Automatically enable larger rx buffer pools for larger mtu powerpc/pseries: Verify CMO memory entitlement updates with virtual I/O powerpc/pseries: vio bus support for CMO powerpc/pseries: iommu enablement for CMO powerpc/pseries: Add CMO paging statistics powerpc/pseries: Add collaborative memory manager powerpc/pseries: Utilities to set firmware page state powerpc/pseries: Enable CMO feature during platform setup powerpc/pseries: Split retrieval of processor entitlement data into a helper routine powerpc/pseries: Add memory entitlement capabilities to /proc/ppc64/lparcfg powerpc/pseries: Split processor entitlement retrieval and gathering to helper routines powerpc/pseries: Remove extraneous error reporting for hcall failures in lparcfg powerpc: Fix compile error with binutils 2.15 ... Fixed up conflict in arch/powerpc/platforms/52xx/Kconfig manually.
-
git://git.infradead.org/~dedekind/ubi-2.6Linus Torvalds authored
* 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6: (22 commits) UBI: always start the background thread UBI: fix gcc warning UBI: remove pre-sqnum images support UBI: fix kernel-doc errors and warnings UBI: fix checkpatch.pl errors and warnings UBI: bugfix - do not torture PEB needlessly UBI: rework scrubbing messages UBI: implement multiple volumes rename UBI: fix and re-work debugging stuff UBI: amend commentaries UBI: fix error message UBI: improve mkvol request validation UBI: add ubi_sync() interface UBI: fix 64-bit calculations UBI: fix LEB locking UBI: fix memory leak on error path UBI: do not forget to free internal volumes UBI: fix memory leak UBI: avoid unnecessary division operations UBI: fix buffer padding ...
-
Linus Torvalds authored
The new type checking of the flags arguments to irqsave and friends (commit 3f307891) pointed out this thing with a big nice warning. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Jiang authored
Convert PCI err device from platform to open firmware of_dev to comply with powerpc schemes. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Dave Jiang <djiang@mvista.com> Signed-off-by:
Doug Thompson <dougthompson@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Dave Jiang authored
Fixup of missing bit 0 on 64360 PCIx_ERR_MASK and errata FEr-#11 and FEr-#16 for the 64460. Bit 0 must remain 0. Signed-off-by:
-
Dave Jiang authored
Update get_property() call to use of_get_property() in order to fix compile Signed-off-by:
-
Doug Thompson authored
This module harvests more than just memory errors, it also harvests various bus and dma errors that the Chipset detects. Previously, it would report all such errors, which would cause output to be TOO loud. This patches therefore adds a parameter which is used to turn off NON-MEMORY error reports by default. Or the reporting can be enabled via the parameter Also did code style cleanup: less than 80 characters per line rule Signed-off-by:
-
Arthur Jones authored
The channel DIMM label does not seem to be used much in the edac code. However, where it is used (in the core code), it is assumed to not have a newline embedded. This leaves the sysfs file newline free which looks funny when cat'ing it. Here we just add the trailing newline to the sysfs chX_dimm_label output... [Doug Thompson note: the DIMM label is one of the primary uses of EDAC. User space daemon scripts, edac-utils@sourceforge, populate the DIMM label fields, via /sys/devices/system/edac attributes, with the silk screen labels of the motherboard in use. dmidecode access BIOS tables, but BIOS tables are well known to be incorrect and useless in these respects. edac-utils will strip off any newlines before its use of the output, when displaying DIMM slot silk screen labels. Signed-off-by:
Arthur Jones <ajones@riverbed.com> Signed-off-by:
-
Arthur Jones authored
Static kobjects and ksets are not supported in Linux kernel. Convert the mc_kset from static to dynamic. This patch depends on my previous patch to remove the module parameter attributes from mc... Signed-off-by:
-
Arthur Jones authored
/sys/devices/system/edac/mc has a few files which are duplicated in /sys/module/edac_core/parameters. Now that all the functionality is duplicated between these two locations, we remove the former kobject attributes and update the documentation. Signed-off-by:
-
Arthur Jones authored
When updating the edac_mc_poll_msec module parameter from the sysfs /sys/module/edac_core/parameters/edac_mc_poll_msec file, we don't update the workq timers. So that, if we move from a big poll time to a small one, the small one won't take effect until the big one has timed out. Here we provide a new module parameter set method to call out to the update routine. This brings the /sys/module/edac_core/parameters functionality up to that provided by the /sys/drivers/system/edac/mc sysfs module parameter files so that we can remove them or at least link to the /sys/module files... Signed-off-by:
-
Arthur Jones authored
Static kobjects are not supported in linux kernel. Convert the edac_pci_top_main_kobj from static to dynamic. This avoids the double free of the edac_pci_top_main_kobj.name that we see on module reload of the e752x edac driver (and probably others as well). In addition Greg KH <greg@kroah.com> has pointed out that this code may be cleaned up significantly. I will look at that as a follow-on patch, for now, I just want the minimum fix to get this double-free oops bug squashed... Many thanks to Greg KH for his patience in showing me what the Documentation/kobject.txt already said (oops)... Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Arthur Jones authored
Some code cleanliness issues found by Andrew Morton (thanks!) which should not affect functionality, but which should help make the code more maintainable. In particular, we now: * convert all #define's w/ a parameter to static inlines * use 1UL rather than 1ULL when calculating an unsigned long * use pci_disable_device The resulting code is tested and seems to work fine... Signed-off-by:
-
Arthur Jones authored
Explicitly unmask ECC errors we are interested in reporting. Signed-off-by:
-
Arthur Jones authored
It is possible that the BIOS did not enable ECC at boot time. We check for that case and fail to load if it is true. Signed-off-by:
-
Arthur Jones authored
The error mask we use to trigger ECC notifications is missing many bits of interest. We add these bits here so that all possible ECC errors can be reported. Signed-off-by:
-
Arthur Jones authored
Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by:
-
Miklos Szeredi authored
If fuse filesystem doesn't define it's own lock operations, then allow the lock manager to work with fuse. Adding lockd support for remote locking is also possible, but more rarely used, so leave it till later. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Matthew Wilcox <matthew@wil.cx> Cc: David Teigland <teigland@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Miklos Szeredi authored
Implement the get_parent export operation by sending a LOOKUP request with ".." as the name. Implement looking up an inode by node ID after it has been evicted from the cache. This is done by seding a LOOKUP request with "." as the name (for all file types, not just directories). The filesystem can set the FUSE_EXPORT_SUPPORT flag in the INIT reply, to indicate that it supports these special lookups. Thanks to John Muir for the original implementation of this feature. Signed-off-by:
-
Miklos Szeredi authored
Add a new helper function which sends a LOOKUP request with the supplied name. This will be used by the next patch to send special LOOKUP requests with "." and ".." as the name. Signed-off-by:
-
Miklos Szeredi authored
Implement export_operations, to allow fuse filesystems to be exported to NFS. This feature has been in the out-of-tree fuse module, and is widely used and tested. It has not been originally merged into mainline, because doing the NFS export in userspace was thought to be a cleaner and more efficient way of doing it, than through the kernel. While that is true, it would also have involved a lot of duplicated effort at reimplementing NFS exporting (all the different versions of the protocol). This effort was unfortunately not undertaken by anyone, so we are left with doing it the easy but less efficient way. If this feature goes in, the out-of-tree fuse module can go away, which would have several advantages: - not having to maintain two versions - less confusion for users - no bugs due to kernel API changes Comment from hch: - Use the same fh_type values as XFS, since we use the same fh encoding. Signed-off-by:
-
Miklos Szeredi authored
Use d_splice_alias() instead of d_add() in fuse lookup code, to allow NFS exporting. Signed-off-by:
-
Miklos Szeredi authored
Allow filesystem's ->lock() method to call posix_lock_file() instead of posix_lock_file_wait(), and return FILE_LOCK_DEFERRED. This makes it possible to implement a such a ->lock() function, that works with the lock manager, which needs the call to be asynchronous. Now the vfs_lock_file() helper can be used, so this is a cleanup as well. Signed-off-by:
-
Miklos Szeredi authored
Extract common code into a function. Signed-off-by:
-
Miklos Szeredi authored
Use a special error value FILE_LOCK_DEFERRED to mean that a locking operation returned asynchronously. This is returned by posix_lock_file() for sleeping locks to mean that the lock has been queued on the block list, and will be woken up when it might become available and needs to be retried (either fl_lmops->fl_notify() is called or fl_wait is woken up). f_op->lock() to mean either the above, or that the filesystem will call back with fl_lmops->fl_grant() when the result of the locking operation is known. The filesystem can do this for sleeping as well as non-sleeping locks. This is to make sure, that return values of -EAGAIN and -EINPROGRESS by filesystems are not mistaken to mean an asynchronous locking. This also makes error handling in fs/locks.c and lockd/svclock.c slightly cleaner. Signed-off-by:
-
Miklos Szeredi authored
Fix nlm_fopen() to return NLM_FAILED (or NLM_LCK_DENIED_NOLOCKS) instead of NLM_LCK_DENIED. The latter means the lock request failed because of a conflicting lock (i.e. a temporary error), which is wrong in this case. Also fix the client to return ENOLCK instead of EAGAIN if a blocking lock request returns with NLM_LOCK_DENIED. Signed-off-by:
-
Vegard Nossum authored
Cc: Shailabh Nagar <nagar@watson.ibm.com> Signed-off-by:
Vegard Nossum <vegard.nossum@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
Keika Kobayashi authored
Update document and make getdelays.c show delay accounting for memory reclaim. For making a distinction between "swapping in pages" and "memory reclaim" in getdelays.c, MEM is changed to SWAP. Signed-off-by:
Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Keika Kobayashi authored
Add members for memory reclaim delay to taskstats, and accumulate them in __delayacct_add_tsk() . Signed-off-by:
-
Keika Kobayashi authored
Sometimes, application responses become bad under heavy memory load. Applications take a bit time to reclaim memory. The statistics, how long memory reclaim takes, will be useful to measure memory usage. This patch adds accounting memory reclaim to per-task-delay-accounting for accounting the time of do_try_to_free_pages(). <i.e> - When System is under low memory load, memory reclaim may not occur. $ free total used free shared buffers cached Mem: 8197800 1577300 6620500 0 4808 1516724 -/+ buffers/cache: 55768 8142032 Swap: 16386292 0 16386292 $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 5069748 10612 3014060 0 0 0 0 3 26 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 4 22 0 0 100 0 0 0 0 5069748 10612 3014060 0 0 0 0 3 18 0 0 100 0 Measure the time of tar command. $ ls -s test.dat 1501472 test.dat $ time tar cvf test.tar test.dat real 0m13.388s user 0m0.116s sys 0m5.304s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 428 5528345500 5477116080 62749891 IO count delay total 338 8078977189 SWAP count delay total 0 0 RECLAIM count delay total 0 0 - When system is under heavy memory load memory reclaim may occur. $ vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 7159032 49724 1812 3012 0 0 0 0 3 24 0 0 100 0 0 0 7159032 49724 1812 3012 0 0 0 0 4 24 0 0 100 0 0 0 7159032 49848 1812 3012 0 0 0 0 3 22 0 0 100 0 In this case, one process uses more 8G memory by execution of malloc() and memset(). $ time tar cvf test.tar test.dat real 1m38.563s <- increased by 85 sec user 0m0.140s sys 0m7.060s $ ./delayget -d -p <pid> CPU count real total virtual total delay total 9021 7140446250 7315277975 923201824 IO count delay total 8965 90466349669 SWAP count delay total 3 21036367 RECLAIM count delay total 740 61011951153 In the later case, the value of RECLAIM is increasing. So, taskstats can show how much memory reclaim influences TAT. Signed-off-by:KOSAKI Motohiro <kosaki.motohiro@jp.fujistu.com> Signed-off-by:
-
David Howells authored
Fix bacct_add_tsk()'s use of do_div() on an s64 by making ac_etime a u64 instead and dividing that. Possibly this should be guarded lest the interval calculation turn up negative, but the possible negativity of the result of the division is cast away, and it shouldn't end up negative anyway. This was introduced by patch f3cef7a9. Signed-off-by:
David Howells <dhowells@redhat.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by:
-
Andrea Righi authored
Report per-thread I/O statistics in /proc/pid/task/tid/io and aggregate parent I/O statistics in /proc/pid/io. This approach follows the same model used to account per-process and per-thread CPU times. As a practial application, this allows for example to quickly find the top I/O consumer when a process spawns many child threads that perform the actual I/O work, because the aggregated I/O statistics can always be found in /proc/pid/io. [ Oleg Nesterov points out that we should check that the task is still alive before we iterate over the threads, but also says that we can do that fixup on top of this later. - Linus ] Acked-by:
Andrea Righi <righi.andrea@gmail.com> Cc: Matt Heaton <matt@hostmonster.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Acked-by-with-comments: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Pavel Emelyanov authored
Fix the one describing what this function is and add one more - about locking absence around pid namespaces loop. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
