Skip to content

L
linux
Switch branch/tag
  1. 04 May, 2010 1 commit
    • Frederic Weisbecker's avatar
      hw_breakpoints: Fix percpu build failure · 777d0411
      Frederic Weisbecker authored 
      Fix this build error:

   kernel/hw_breakpoint.c:58:1: error: pasting "__pcpu_scope_" and "*" does not give a valid preprocessing token

It happens if CONFIG_DEBUG_FORCE_WEAK_PER_CPU, because we concatenate
someting with the name and we have the "*" in the name.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
LKML-Reference: <20100503133942.GA5497@nowhere>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      777d0411
  3. 03 May, 2010 1 commit
  5. 02 May, 2010 5 commits
    • Arnaldo Carvalho de Melo's avatar
      perf inject: Refactor read_buildid function · 090f7204
      Arnaldo Carvalho de Melo authored 
      Into two functions, one that actually reads the build_id for the dso if
it wasn't already read, and another taht will inject the event if the
build_id is available.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      090f7204
    • Arnaldo Carvalho de Melo's avatar
      perf record: Don't exit in live mode when no tracepoints are enabled · 2c9faa06
      Arnaldo Carvalho de Melo authored 
      With this I was able to actually test Tom Zanussi's two previous patches
in my usual perf testing ways, i.e. without any tracepoints activated.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      2c9faa06
    • Tom Zanussi's avatar
      perf: add perf-inject builtin · 454c407e
      Tom Zanussi authored 
      Currently, perf 'live mode' writes build-ids at the end of the
session, which isn't actually useful for processing live mode events.

What would be better would be to have the build-ids sent before any of
the samples that reference them, which can be done by processing the
event stream and retrieving the build-ids on the first hit.  Doing
that in perf-record itself, however, is off-limits.

This patch introduces perf-inject, which does the same job while
leaving perf-record untouched.  Normal mode perf still records the
build-ids at the end of the session as it should, but for live mode,
perf-inject can be injected in between the record and report steps
e.g.:

perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i -

perf-inject reads a perf-record event stream and repipes it to stdout.
At any point the processing code can inject other events into the
event stream - in this case build-ids (-b option) are read and
injected as needed into the event stream.

Build-ids are just the first user of perf-inject - potentially
anything that needs userspace processing to augment the trace stream
with additional information could make use of this facility.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: default avatarTom Zanussi <tzanussi@gmail.com>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      454c407e
    • Tom Zanussi's avatar
      perf/live: don't synthesize build ids at the end of a live mode trace · 789688fa
      Tom Zanussi authored 
      It doesn't really make sense to record the build ids at the end of a
live mode session - live mode samples need that information during the
trace rather than at the end.

Leave event__synthesize_build_id() in place, however; we'll still be
using that to synthesize build ids in a more timely fashion in a
future patch.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1272696080-16435-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: default avatarTom Zanussi <tzanussi@gmail.com>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      789688fa
    • Arnaldo Carvalho de Melo's avatar
      perf tools: Don't use code surrounded by __KERNEL__ · fb72014d
      Arnaldo Carvalho de Melo authored 
      We need to refactor code to be explicitely shared by the kernel and at
least the tools/ userspace programs, so, till we do that, copy the bare
minimum bitmap/bitops code needed by tools/perf.
Reported-by: default avatar"H. Peter Anvin" <hpa@zytor.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      fb72014d
  7. 01 May, 2010 7 commits
    • Frederic Weisbecker's avatar
      hw-breakpoints: Get the number of available registers on boot dynamically · feef47d0
      Frederic Weisbecker authored 
      The breakpoint generic layer assumes that archs always know in advance
the static number of address registers available to host breakpoints
through the HBP_NUM macro.

However this is not true for every archs. For example Arm needs to get
this information dynamically to handle the compatiblity between
different versions.

To solve this, this patch proposes to drop the static HBP_NUM macro
and let the arch provide the number of available slots through a
new hw_breakpoint_slots() function. For archs that have
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS selected, it will be called once
as the number of registers fits for instruction and data breakpoints
together.
For the others it will be called first to get the number of
instruction breakpoint registers and another time to get the
data breakpoint registers, the targeted type is given as a
parameter of hw_breakpoint_slots().
Reported-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: default avatarPaul Mundt <lethal@linux-sh.org>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
      feef47d0
    • Frederic Weisbecker's avatar
      hw-breakpoints: Handle breakpoint weight in allocation constraints · f93a2054
      Frederic Weisbecker authored 
      Depending on their nature and on what an arch supports, breakpoints
may consume more than one address register. For example a simple
absolute address match usually only requires one address register.
But an address range match may consume two registers.

Currently our slot allocation constraints, that tend to reflect the
limited arch's resources, always consider that a breakpoint consumes
one slot.

Then provide a way for archs to tell us the weight of a breakpoint
through a new hw_breakpoint_weight() helper. This weight will be
computed against the generic allocation constraints instead of
a constant value.
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: default avatarPaul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
      f93a2054
    • Frederic Weisbecker's avatar
      hw-breakpoints: Separate constraint space for data and instruction breakpoints · 0102752e
      Frederic Weisbecker authored 
      There are two outstanding fashions for archs to implement hardware
breakpoints.

The first is to separate breakpoint address pattern definition
space between data and instruction breakpoints. We then have
typically distinct instruction address breakpoint registers
and data address breakpoint registers, delivered with
separate control registers for data and instruction breakpoints
as well. This is the case of PowerPc and ARM for example.

The second consists in having merged breakpoint address space
definition between data and instruction breakpoint. Address
registers can host either instruction or data address and
the access mode for the breakpoint is defined in a control
register. This is the case of x86 and Super H.

This patch adds a new CONFIG_HAVE_MIXED_BREAKPOINTS_REGS config
that archs can select if they belong to the second case. Those
will have their slot allocation merged for instructions and
data breakpoints.

The others will have a separate slot tracking between data and
instruction breakpoints.
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: default avatarPaul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
      0102752e
    • Frederic Weisbecker's avatar
      hw-breakpoints: Change/Enforce some breakpoints policies · b2812d03
      Frederic Weisbecker authored 
      The current policies of breakpoints in x86 and SH are the following:

- task bound breakpoints can only break on userspace addresses
- cpu wide breakpoints can only break on kernel addresses

The former rule prevents ptrace breakpoints to be set to trigger on
kernel addresses, which is good. But as a side effect, we can't
breakpoint on kernel addresses for task bound breakpoints.

The latter rule simply makes no sense, there is no reason why we
can't set breakpoints on userspace while performing cpu bound
profiles.

We want the following new policies:

- task bound breakpoint can set userspace address breakpoints, with
no particular privilege required.
- task bound breakpoints can set kernelspace address breakpoints but
must be privileged to do that.
- cpu bound breakpoints can do what they want as they are privileged
already.

To implement these new policies, this patch checks if we are dealing
with a kernel address breakpoint, if so and if the exclude_kernel
parameter is set, we tell the user that the breakpoint is invalid,
which makes a good generic ptrace protection.
If we don't have exclude_kernel, ensure the user has the right
privileges as kernel breakpoints are quite sensitive (risk of
trap recursion attacks and global performance impacts).

[ Paul Mundt: keep addr space check for sh signal delivery and fix
  double function declaration]
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
      b2812d03
    • Frederic Weisbecker's avatar
      hw-breakpoints: Check disabled breakpoints again · 87e9b202
      Frederic Weisbecker authored 
      We stopped checking disabled breakpoints because we weren't
allowing breakpoints on NULL addresses. And gdb tends to set
NULL addresses on inactive breakpoints.

But refusing NULL addresses was actually a regression that has
been fixed now. There is no reason anymore to not validate
inactive breakpoint settings.
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: default avatarPaul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
      87e9b202
    • Frederic Weisbecker's avatar
      hw-breakpoints: Tag ptrace breakpoint as exclude_kernel · 73266fc1
      Frederic Weisbecker authored 
      Tag ptrace breakpoints with the exclude_kernel attribute set. This
will make it easier to set generic policies on breakpoints, when it
comes to ensure nobody unpriviliged try to breakpoint on the kernel.
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: default avatarPaul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
      73266fc1
    • Frederic Weisbecker's avatar
      perf: Fix warning while reading ring buffer headers · d00a47cc
      Frederic Weisbecker authored 
      commit e9e94e3b
"perf trace: Ignore "overwrite" field if present in
/events/header_page" makes perf trace launching spurious warnings
about unexpected tokens read:

	Warning: Error: expected type 6 but read 4

This change tries to handle the overcommit field in the header_page
file whenever this field is present or not.

The problem is that if this field is not present, we try to find it
and give up in the middle of the line when we realize we are actually
dealing with another field, which is the "data" one. And this failure
abandons the file pointer in the middle of the "data" description
line:

	field: u64 timestamp;	offset:0;	size:8;	signed:0;
	field: local_t commit;	offset:8;	size:8;	signed:1;
	field: char data;	offset:16;	size:4080;	signed:1;
                      ^^^
                      Here

What happens next is that we want to read this line to parse the data
field, but we fail because the pointer is not in the beginning of the
line.

We could probably fix that by rewinding the pointer. But in fact we
don't care much about these headers that only concern the ftrace
ring-buffer. We don't use them from perf.

Just skip this part of perf.data, but don't remove it from recording
to stay compatible with olders perf.data
Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
      d00a47cc
  9. 30 Apr, 2010 10 commits
  11. 29 Apr, 2010 12 commits
  13. 28 Apr, 2010 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7