Skip to content

L
linux
Switch branch/tag
  1. 17 Jun, 2016 26 commits
  3. 16 Jun, 2016 14 commits
    • David S. Miller's avatar
      Merge branch 'stmmac-wol' · b4eccef8
      David S. Miller authored 
      Vincent Palatin says:

====================
net: stmmac: dwmac-rk: fixes for Wake-on-Lan on RK3288

In order to support Wake-On-Lan when using the RK3288 integrated MAC
(with an external RGMII PHY), we need to avoid shutting down the regulator
of the external PHY when the MAC is suspended as it's currently done in the MAC
platform code.
As a first step, create independant callbacks for suspend/resume rather than
re-using exit/init callbacks. So the dwmac platform driver can behave differently
on suspend where it might skip shutting the PHY and at module unloading.
Then update the dwmac-rk driver to switch off the PHY regulator only if we are
not planning to wake up from the LAN.
Finally add the PMT interrupt to the MAC device tree configuration, so we can
wake up the core from it when the PHY has received the magic packet.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b4eccef8
    • Vincent Palatin's avatar
      ARM: dts: rockchip: add interrupt for Wake-on-Lan on RK3288 · d5bfbeb8
      Vincent Palatin authored 
      In order to use Wake-on-Lan on RK3288 integrated MAC, we need to wake-up
the CPU on the PMT interrupt when the MAC and the PHY are in low power mode.
Adding the interrupt declaration.
Signed-off-by: default avatarVincent Palatin <vpalatin@chromium.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d5bfbeb8
    • Vincent Palatin's avatar
      net: stmmac: dwmac-rk: keep the PHY up for WoL · 229666c1
      Vincent Palatin authored 
      When suspending the machine, do not shutdown the external PHY by cutting
its regulator in the mac platform driver suspend code if Wake-on-Lan is enabled,
else it cannot wake us up.
In order to do this, split the suspend/resume callbacks from the
init/exit callbacks, so we can condition the power-down on the lack of
need to wake-up from the LAN but do it unconditionally when unloading the
module.
Signed-off-by: default avatarVincent Palatin <vpalatin@chromium.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      229666c1
    • Vincent Palatin's avatar
      net: stmmac: allow to split suspend/resume from init/exit callbacks · cecbc556
      Vincent Palatin authored 
      Let the stmmac platform drivers provide dedicated suspend and resume
callbacks rather than always re-using the init and exits callbacks.
If the driver does not provide the suspend or resume callback, we fall
back to the old behavior trying to use exit or init.

This allows a specific platform to perform only a partial power-down on
suspend if Wake-on-Lan is enabled but always perform the full shutdown
sequence if the module is unloaded.
Signed-off-by: default avatarVincent Palatin <vpalatin@chromium.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cecbc556
    • Xin Long's avatar
      sctp: change sk state to CLOSED instead of CLOSING in sctp_sock_migrate · 141ddefc
      Xin Long authored 
      Commit d46e416c ("sctp: sctp should change socket state when
shutdown is received") may set sk_state CLOSING in sctp_sock_migrate,
but inet_accept doesn't allow the sk_state other than ESTABLISHED/
CLOSED for sctp. So we will change sk_state to CLOSED, instead of
CLOSING, as actually sk is closed already there.

Fixes: d46e416c ("sctp: sctp should change socket state when shutdown is received")
Reported-by: default avatarYe Xiaolong <xiaolong.ye@intel.com>
Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      141ddefc
    • Fabien Siron's avatar
      netlink: Add comment to warn about deprecated netlink rings attribute request · 5fb384b0
      Fabien Siron authored 
      Signed-off-by: default avatarFabien Siron <fabien.siron@epita.fr>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5fb384b0
    • David S. Miller's avatar
      Merge branch 'bpf-fd-array-release' · f0362eab
      David S. Miller authored 
      Daniel Borkmann says:

====================
bpf: improve fd array release

This set improves BPF perf fd array map release wrt to purging
entries, first two extend the API as needed. Please see individual
patches for more details.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f0362eab
    • Daniel Borkmann's avatar
      bpf, maps: flush own entries on perf map release · 3b1efb19
      Daniel Borkmann authored 
      The behavior of perf event arrays are quite different from all
others as they are tightly coupled to perf event fds, f.e. shown
recently by commit e03e7ee3 ("perf/bpf: Convert perf_event_array
to use struct file") to make refcounting on perf event more robust.
A remaining issue that the current code still has is that since
additions to the perf event array take a reference on the struct
file via perf_event_get() and are only released via fput() (that
cleans up the perf event eventually via perf_event_release_kernel())
when the element is either manually removed from the map from user
space or automatically when the last reference on the perf event
map is dropped. However, this leads us to dangling struct file's
when the map gets pinned after the application owning the perf
event descriptor exits, and since the struct file reference will
in such case only be manually dropped or via pinned file removal,
it leads to the perf event living longer than necessary, consuming
needlessly resources for that time.

Relations between perf event fds and bpf perf event map fds can be
rather complex. F.e. maps can act as demuxers among different perf
event fds that can possibly be owned by different threads and based
on the index selection from the program, events get dispatched to
one of the per-cpu fd endpoints. One perf event fd (or, rather a
per-cpu set of them) can also live in multiple perf event maps at
the same time, listening for events. Also, another requirement is
that perf event fds can get closed from application side after they
have been attached to the perf event map, so that on exit perf event
map will take care of dropping their references eventually. Likewise,
when such maps are pinned, the intended behavior is that a user
application does bpf_obj_get(), puts its fds in there and on exit
when fd is released, they are dropped from the map again, so the map
acts rather as connector endpoint. This also makes perf event maps
inherently different from program arrays as described in more detail
in commit c9da161c ("bpf: fix clearing on persistent program
array maps").

To tackle this, map entries are marked by the map struct file that
added the element to the map. And when the last reference to that map
struct file is released from user space, then the tracked entries
are purged from the map. This is okay, because new map struct files
instances resp. frontends to the anon inode are provided via
bpf_map_new_fd() that is called when we invoke bpf_obj_get_user()
for retrieving a pinned map, but also when an initial instance is
created via map_create(). The rest is resolved by the vfs layer
automatically for us by keeping reference count on the map's struct
file. Any concurrent updates on the map slot are fine as well, it
just means that perf_event_fd_array_release() needs to delete less
of its own entires.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3b1efb19
    • Daniel Borkmann's avatar
      bpf, maps: extend map_fd_get_ptr arguments · d056a788
      Daniel Borkmann authored 
      This patch extends map_fd_get_ptr() callback that is used by fd array
maps, so that struct file pointer from the related map can be passed
in. It's safe to remove map_update_elem() callback for the two maps since
this is only allowed from syscall side, but not from eBPF programs for these
two map types. Like in per-cpu map case, bpf_fd_array_map_update_elem()
needs to be called directly here due to the extra argument.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d056a788
    • Daniel Borkmann's avatar
      bpf, maps: add release callback · 61d1b6a4
      Daniel Borkmann authored 
      Add a release callback for maps that is invoked when the last
reference to its struct file is gone and the struct file about
to be released by vfs. The handler will be used by fd array maps.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61d1b6a4
    • David S. Miller's avatar
      Merge branch 'sfc-rx-vlan-filtering' · b478af0c
      David S. Miller authored 
      Edward Cree says:

====================
sfc: RX VLAN filtering

Adds support for VLAN-qualified receive filters on EF10 hardware.
This is needed when running as a guest if the hypervisor has enabled
vfs-vlan-restrict, in which case the firmware rejects filters not qualified
with VLAN 0.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b478af0c
    • Andrew Rybchenko's avatar
      sfc: Fix VLAN filtering feature if vPort has VLAN_RESTRICT flag · 38d27f38
      Andrew Rybchenko authored 
      If vPort has VLAN_RESTRICT flag, VLAN tagged traffic will not be
delivered without corresponding Rx filters which may be proxied to and
moderated by hypervisor.
Signed-off-by: default avatarEdward Cree <ecree@solarflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      38d27f38
    • Edward Cree's avatar
      sfc: Update MCDI protocol definitions · 23e202b4
      Edward Cree authored 
      Signed-off-by: default avatarEdward Cree <ecree@solarflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      23e202b4
    • Andrew Rybchenko's avatar
      sfc: Disable VLAN filtering by default if not strictly required · eb7cfd8c
      Andrew Rybchenko authored 
      If should be done after net_dev->hw_features initialization, to keep the
feature there to be able to enable it later using ethtool.

VLAN filtering is enforced and fixed if vPort requires usage of VLAN
filters to receive tagged traffic.
Signed-off-by: default avatarEdward Cree <ecree@solarflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eb7cfd8c
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7