- 02 Apr, 2015 4 commits
-
-
Jason Cooper authored
-
Jason Cooper authored
-
Geert Uytterhoeven authored
The IRQC module clock is managed through Runtime PM and PM Domains. If wake-up is enabled, this clock must not be disabled during system suspend. Hence implement irq_chip.irq_set_wake(), which increments/decrements the clock's enable_count when needed. This fixes wake-up by gpio-keys on r8a73a4/ape6evm. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Link: https://lkml.kernel.org/r/1427889606-18671-1-git-send-email-geert+renesas@glider.beSigned-off-by:
Jason Cooper <jason@lakedaemon.net>
-
Gregory CLEMENT authored
On the Armada 370/XP SoCs, in standby mode the SoC stay powered and it is possible to wake-up from any interrupt sources. This patch adds flag to the MPIC irqchip driver to let linux know this. Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1427724278-12379-5-git-send-email-gregory.clement@free-electrons.comSigned-off-by:
-
- 29 Mar, 2015 1 commit
-
-
Markos Chandras authored
We add new functions to start and stop the GIC counter since there are no guarantees the counter will be running after a CPU reset. The GIC counter is stopped by setting the 29th bit on the GIC Config register and it is started by clearing that bit. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: <linux-kernel@vger.kernel.org> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Link: https://lkml.kernel.org/r/1427113923-9840-2-git-send-email-markos.chandras@imgtec.comSigned-off-by:
-
- 23 Mar, 2015 4 commits
-
-
Baruch Siach authored
The digicolor_set_gc() routine is only called from __init annotated digicolor_of_init(). Annotate digicolor_set_gc() with __init as well to save a few bytes at run time. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Link: https://lkml.kernel.org/r/a3b57ecdbe0b07f55c20c07ff98f1f694275722d.1427009985.git.baruch@tkos.co.ilSigned-off-by:
-
Geert Uytterhoeven authored
The external IRQ controller has a functional clock, which is used for power management. Document it. Fix a typo in the r8a73a4 SoC name while we're at it. Signed-off-by:
-
Geert Uytterhoeven authored
This is just enough to let pm_clk_*() enable the functional clock, and manage it for suspend/resume, if present. Before, it was assumed enabled by the bootloader or reset state. Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
- 15 Mar, 2015 3 commits
-
-
Jason Cooper authored
-
Jason Cooper authored
-
Stephen Boyd authored
In a uniprocessor implementation the interrupt processor targets registers are read-as-zero/write-ignored (RAZ/WI). Unfortunately gic_get_cpumask() will print a critical message saying GIC CPU mask not found - kernel will fail to boot. if these registers all read as zero, but there won't actually be a problem on uniprocessor systems and the kernel will boot just fine. Skip this check if we're running a UP kernel or if we detect that the hardware only supports a single processor. Acked-by:
Nicolas Pitre <nico@linaro.org> Acked-by:
Felipe Balbi <balbi@ti.com> Acked-by:
Nishanth Menon <nm@ti.com> Acked-by:
Stefan Agner <stefan@agner.ch> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Link: https://lkml.kernel.org/r/1426141291-21641-1-git-send-email-sboyd@codeaurora.orgSigned-off-by:
-
- 08 Mar, 2015 6 commits
-
-
Maxime Ripard authored
In order to let the Performance Monitoring Unit interrupts flowing in the MPIC, we need to unmask these interrupts in the Coherency Fabric Local Interrupt Mask Register. Since this register is a CPU-local register, unmasking this interrupt needs to be done on the boot CPU when the driver initializes, but also on the secondary CPU when they are brought up. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
-
Ezequiel Garcia authored
This commit introduces a helper function is_percpu_irq(), to be used when interrupts are mapped to decide which ones are set as per CPU. This change will allow to extend the list of per cpu interrupts in a less intrusive fashion; also, it makes the code slightly more readable by keeping a list of the per CPU interrupts. Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
-
Ezequiel Garcia authored
The irqchip driver called armada_xp_mpic_smp_cpu_init() when CONFIG_SMP=Y to initialize some per cpu registers. The function is called on each CPU by calling it explicitly on the boot CPU and then using a CPU notifier for the non boot CPUs. This commit removes the CONFIG_SMP constrain, so the per cpu registers are also initialized when CONFIG_SMP=N, which is the right thing to do. Signed-off-by:
-
Stefan Agner authored
Add binding documentation for CPU configuration and interrupt router submodule of the Miscellaneous System Control Module. The MSCM is used in all variants of Freescale Vybrid SoC's. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Stefan Agner authored
This adds support for Vybrid's interrupt router. On VF6xx models, almost all peripherals can be used by either of the two CPU's, the Cortex-A5 or the Cortex-M4. The interrupt router routes the peripheral interrupts to the configured CPU. This IRQ chip driver configures the interrupt router to route the requested interrupt to the CPU the kernel is running on. The driver makes use of the irqdomain hierarchy support. The parent is given by the device tree. This should be one of the two possible parents either ARM GIC or the ARM NVIC interrupt controller. The latter is currently not yet supported. Note that there is no resource control mechnism implemented to avoid concurrent access of the same peripheral. The user needs to make sure to use device trees which assign the peripherals orthogonally. However, this driver warns the user in case the interrupt is already configured for the other CPU. This provides a poor man's resource controller. Acked-by:
-
Maxime Ripard authored
On the Cortex-A9-based Armada SoCs, the MPIC is not the primary interrupt controller. Yet, it still has to handle some per-cpu interrupt. To do so, it is chained with the GIC using a per-cpu interrupt. However, the current code only call irq_set_chained_handler, which is called and enable that interrupt only on the boot CPU, which means that the parent per-CPU interrupt is never unmasked on the secondary CPUs, preventing the per-CPU interrupt to actually work as expected. This was not seen until now since the only MPIC PPI users were the Marvell timers that were not working, but not used either since the system use the ARM TWD by default, and the ethernet controllers, that are faking there interrupts as SPI, and don't really expect to have interrupts on the secondary cores anyway. Add a CPU notifier that will enable the PPI on the secondary cores when they are brought up. Cc: <stable@vger.kernel.org> # 3.15+ Signed-off-by:
-
- 07 Mar, 2015 1 commit
-
-
Jason Cooper authored
-
- 03 Mar, 2015 4 commits
-
-
Geert Uytterhoeven authored
Signed-off-by:
-
Lee Jones authored
Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://lkml.kernel.org/r/1424272444-16230-4-git-send-email-lee.jones@linaro.orgSigned-off-by:
-
Lee Jones authored
This driver is used to enable System Configuration Register controlled External, CTI (Core Sight), PMU (Performance Management), and PL310 L2 Cache IRQs prior to use. Signed-off-by:
-
Lee Jones authored
These defines are used to allow values used for configuration to be easily human readable and will lessen the chance of logical mistakes. Signed-off-by:
-
- 23 Feb, 2015 3 commits
-
-
Linus Torvalds authored
.. after extensive statistical analysis of my G+ polling, I've come to the inescapable conclusion that internet polls are bad. Big surprise. But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38% margin, in a poll that people weren't even supposed to participate in. Who can argue with solid numbers like that? 5,796 votes from people who can't even follow the most basic directions? In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%, but with a total of 29,110 votes right now. Now, arguably, that vote spread is only about 3,200 votes, which is less than the almost six thousand votes that the "please ignore" poll got, so it could be considered noise. But hey, I asked, so I'll honor the votes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes. We also reserved code points for encryption and read-only images (for which the implementation is mostly just the reserved code point for a read-only feature :-)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix indirect punch hole corruption ext4: ignore journal checksum on remount; don't fail ext4: remove duplicate remount check for JOURNAL_CHECKSUM change ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize ext4: support read-only images ext4: change to use setup_timer() instead of init_timer() ext4: reserve codepoints used by the ext4 encryption feature jbd2: complain about descriptor block checksum errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted stuff from this cycle. The big ones here are multilayer overlayfs from Miklos and beginning of sorting ->d_inode accesses out from David" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits) autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation procfs: fix race between symlink removals and traversals debugfs: leave freeing a symlink body until inode eviction Documentation/filesystems/Locking: ->get_sb() is long gone trylock_super(): replacement for grab_super_passive() fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) SELinux: Use d_is_positive() rather than testing dentry->d_inode Smack: Use d_is_positive() rather than testing dentry->d_inode TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR() Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb VFS: Split DCACHE_FILE_TYPE into regular and special types VFS: Add a fallthrough flag for marking virtual dentries VFS: Add a whiteout dentry type VFS: Introduce inode-getting helpers for layered/unioned fs environments Infiniband: Fix potential NULL d_inode dereference posix_acl: fix reference leaks in posix_acl_create autofs4: Wrong format for printing dentry ...
-
- 22 Feb, 2015 14 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "Just one fix this time around. __iommu_alloc_buffer() can cause a BUG() if dma_alloc_coherent() is called with either __GFP_DMA32 or __GFP_HIGHMEM set. The patch from Alexandre addresses this" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()
-
Al Viro authored
X-Coverup: just ask spender Cc: stable@vger.kernel.org Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
use_pde()/unuse_pde() in ->follow_link()/->put_link() resp. Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Cc: stable@vger.kernel.org Signed-off-by: -
Al Viro authored
Signed-off-by: -
Konstantin Khlebnikov authored
I've noticed significant locking contention in memory reclaimer around sb_lock inside grab_super_passive(). Grab_super_passive() is called from two places: in icache/dcache shrinkers (function super_cache_scan) and from writeback (function __writeback_inodes_wb). Both are required for progress in memory allocator. Grab_super_passive() acquires sb_lock to increment sb->s_count and check sb->s_instances. It seems sb->s_umount locked for read is enough here: super-block deactivation always runs under sb->s_umount locked for write. Protecting super-block itself isn't a problem: in super_cache_scan() sb is protected by shrinker_rwsem: it cannot be freed if its slab shrinkers are still active. Inside writeback super-block comes from inode from bdi writeback list under wb->list_lock. This patch removes locking sb_lock and checks s_instances under s_umount: generic_shutdown_super() unlinks it under sb->s_umount locked for write. New variant is called trylock_super() and since it only locks semaphore, callers must call up_read(&sb->s_umount) instead of drop_super(sb) when they're done. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
David Howells authored
Fanotify probably doesn't want to watch autodirs so make it use d_can_lookup() rather than d_is_dir() when checking a dir watch and give an error on fake directories. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack thereof) in cachefiles: (1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as it doesn't want to deal with automounts in its cache. (2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in cachefiles. Signed-off-by: -
David Howells authored
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: -
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in SELinux to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
-
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in Smack to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
-
David Howells authored
Use d_is_dir() rather than d_inode and S_ISDIR(). Note that this will include fake directories such as automount triggers. Signed-off-by:
-
David Howells authored
Use d_is_positive(dentry) or d_is_negative(dentry) rather than testing dentry->d_inode as the dentry may cover another layer that has an inode when the top layer doesn't or may hold a 0,0 chardev that's actually a whiteout. Signed-off-by:
-
David Howells authored
mediated_filesystem() should use dentry->d_sb not dentry->d_inode->i_sb and should avoid file_inode() also since it is really dealing with the path. Signed-off-by:
-
