1. 13 Jan, 2015 31 commits
  2. 12 Jan, 2015 9 commits
    • David S. Miller's avatar
      Merge branch 'tuntap_queues' · d2c60b13
      David S. Miller authored
      Pankaj Gupta says:
      
      ====================
      Increase the limit of tuntap queues
      
      Networking under KVM works best if we allocate a per-vCPU rx and tx
      queue in a virtual NIC. This requires a per-vCPU queue on the host side.
      Modern physical NICs have multiqueue support for large number of queues.
      To scale vNIC to run multiple queues parallel to maximum number of vCPU's
      we need to increase number of queues support in tuntap.
      
      Changes from v4:
      PATCH2: Michael.S.Tsirkin - Updated change comment message.
      
      Changes from v3:
      PATCH1: Michael.S.Tsirkin - Some cleanups and updated commit message.
                                  Perf numbers on 10 Gbs NIC
      Changes from v2:
      PATCH 3: David Miller     - flex array adds extra level of indirection
                                  for preallocated array.(dropped, as flow array
      			    is allocated using kzalloc with failover to zalloc).
      Changes from v1:
      PATCH 2: David Miller     - sysctl changes to limit number of queues
                                  not required for unprivileged users(dropped).
      
      Changes from RFC
      PATCH 1: Sergei Shtylyov  - Add an empty line after declarations.
      PATCH 2: Jiri Pirko -       Do not introduce new module paramaters.
      	 Michael.S.Tsirkin- We can use sysctl for limiting max number
                                  of queues.
      
      This series is to increase the number of tuntap queues. Original work is being
      done by 'jasowang@redhat.com'. I am taking this 'https://lkml.org/lkml/2013/6/19/29'
      patch series as a reference. As per discussion in the patch series:
      
      There were two reasons which prevented us from increasing number of tun queues:
      
      - The netdev_queue array in netdevice were allocated through kmalloc, which may
        cause a high order memory allocation too when we have several queues.
        E.g. sizeof(netdev_queue) is 320, which means a high order allocation would
        happens when the device has more than 16 queues.
      
      - We store the hash buckets in tun_struct which results a very large size of
        tun_struct, this high order memory allocation fail easily when the memory is
        fragmented.
      
      The patch 60877a32 increases the number of tx
      queues. Memory allocation fallback to vzalloc() when kmalloc() fails.
      
      This series tries to address following issues:
      
      - Increase the number of netdev_queue queues for rx similarly its done for tx
        queues by falling back to vzalloc() when memory allocation with kmalloc() fails.
      
      - Increase number of queues to 256, maximum number is equal to maximum number
        of vCPUS allowed in a guest.
      
      I have also done testing with multiple parallel Netperf sessions for different
      combination of queues and CPU's. It seems to be working fine without much increase
      in cpu load with increase in number of queues. I also see good increase in throughput
      with increase in number of queues. Though i had limitation of 8 physical CPU's.
      
      For this test: Two Hosts(Host1 & Host2) are directly connected with cable
      Host1 is running Guest1. Data is sent from Host2 to Guest1 via Host1.
      
      Host kernel: 3.19.0-rc2+, AMD Opteron(tm) Processor 6320
      NIC : Emulex Corporation OneConnect 10Gb NIC (be3)
      
      Patch Applied  %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle  throughput
      Single Queue, 2 vCPU's
      -------------
      Before Patch :all    0.19    0.00    0.16    0.07    0.04    0.10    0.00    0.18    0.00   99.26  57864.18
      After  Patch :all    0.99    0.00    0.64    0.69    0.07    0.26    0.00    1.58    0.00   95.77  57735.77
      
      With 2 Queues, 2 vCPU's
      ---------------
      Before Patch :all    0.19    0.00    0.19    0.10    0.04    0.11    0.00    0.28    0.00   99.08  63083.09
      After  Patch :all    0.87    0.00    0.73    0.78    0.09    0.35    0.00    2.04    0.00   95.14  62917.03
      
      With 4 Queues, 4 vCPU's
      --------------
      Before Patch :all    0.20    0.00    0.21    0.11    0.04    0.12    0.00    0.32    0.00   99.00  80865.06
      After  Patch :all    0.71    0.00    0.93    0.85    0.11    0.51    0.00    2.62    0.00   94.27  86463.19
      
      With 8 Queues, 8 vCPU's
      --------------
      Before Patch :all    0.19    0.00    0.18    0.09    0.04    0.11    0.00    0.23    0.00   99.17  86795.31
      After  Patch :all    0.65    0.00    1.18    0.93    0.13    0.68    0.00    3.38    0.00   93.05  89459.93
      
      With 16 Queues, 8 vCPU's
      --------------
      After  Patch :all    0.61    0.00    1.59    0.97    0.18    0.92    0.00    4.32    0.00   91.41  120951.60
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d2c60b13
    • Pankaj Gupta's avatar
      tuntap: Increase the number of queues in tun. · baf71c5c
      Pankaj Gupta authored
      Networking under kvm works best if we allocate a per-vCPU RX and TX
      queue in a virtual NIC. This requires a per-vCPU queue on the host side.
      
      It is now safe to increase the maximum number of queues.
      Preceding patch: 'net: allow large number of rx queues'
      made sure this won't cause failures due to high order memory
      allocations. Increase it to 256: this is the max number of vCPUs
      KVM supports.
      
      Size of tun_struct changes from 8512 to 10496 after this patch. This keeps
      pages allocated for tun_struct before and after the patch to 3.
      Signed-off-by: default avatarPankaj Gupta <pagupta@redhat.com>
      Reviewed-by: default avatarDavid Gibson <dgibson@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      baf71c5c
    • Pankaj Gupta's avatar
      net: allow large number of rx queues · 10595902
      Pankaj Gupta authored
      netif_alloc_rx_queues() uses kcalloc() to allocate memory
      for "struct netdev_queue *_rx" array.
      If we are doing large rx queue allocation kcalloc() might
      fail, so this patch does a fallback to vzalloc().
      Similar implementation is done for tx queue allocation in
      netif_alloc_netdev_queues().
      
      We avoid failure of high order memory allocation
      with the help of vzalloc(), this allows us to do large
      rx and tx queue allocation which in turn helps us to
      increase the number of queues in tun.
      
      As vmalloc() adds overhead on a critical network path,
      __GFP_REPEAT flag is used with kzalloc() to do this fallback
      only when really needed.
      Signed-off-by: default avatarPankaj Gupta <pagupta@redhat.com>
      Reviewed-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Reviewed-by: default avatarDavid Gibson <dgibson@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      10595902
    • Kenneth Williams's avatar
      team: Remove dead code · e350a96e
      Kenneth Williams authored
      The deleted lines are called from a function which is called:
      1) Only through __team_options_register via team_options_register and
      2) Only during initialization / mode initialization when there are no
      ports attached.
      Therefore the ports list is guarenteed to be empty and this code will
      never be executed.
      Signed-off-by: default avatarKenneth Williams <ken@williamsclan.us>
      Acked-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e350a96e
    • David Decotigny's avatar
      b1e8bc61
    • Rickard Strandqvist's avatar
      net: sched: sch_teql: Remove unused function · ddcde70c
      Rickard Strandqvist authored
      Remove the function teql_neigh_release() that is not used anywhere.
      
      This was partially found by using a static code analysis program called cppcheck.
      Signed-off-by: default avatarRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ddcde70c
    • Rickard Strandqvist's avatar
      net: xfrm: xfrm_algo: Remove unused function · 83400b99
      Rickard Strandqvist authored
      Remove the function aead_entries() that is not used anywhere.
      
      This was partially found by using a static code analysis program called cppcheck.
      Signed-off-by: default avatarRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      83400b99
    • David S. Miller's avatar
      Merge branch 'bridge_vlan_ranges' · d0d2cc53
      David S. Miller authored
      Roopa Prabhu says:
      
      ====================
      bridge: support for vlan range in setlink/dellink
      
      This series adds new flags in IFLA_BRIDGE_VLAN_INFO to indicate
      vlan range.
      
      Will post corresponding iproute2 patches if these get accepted.
      
      v1-> v2
          - changed patches to use a nested list attribute
          IFLA_BRIDGE_VLAN_INFO_LIST as suggested by scott feldman
          - dropped notification changes from the series. Will post them
          separately after this range message is accepted.
      
      v2 -> v3
          - incorporated some review feedback
          - include patches to fill vlan ranges during getlink
          - Dropped IFLA_BRIDGE_VLAN_INFO_LIST. I think it may get
          confusing to userspace if we introduce yet another way to
          send lists. With getlink already sending nested
          IFLA_BRIDGE_VLAN_INFO in IFLA_AF_SPEC, It seems better to
          use the existing format for lists and just use the flags from v2
          to mark vlan ranges
      ====================
      Signed-off-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: default avatarWilson Kok <wkok@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d0d2cc53
    • Roopa Prabhu's avatar
      bridge: new function to pack vlans into ranges during gets · 36cd0ffb
      Roopa Prabhu authored
      This patch adds new function to pack vlans into ranges
      whereever applicable using the flags BRIDGE_VLAN_INFO_RANGE_BEGIN
      and BRIDGE VLAN_INFO_RANGE_END
      
      Old vlan packing code is moved to a new function and continues to be
      called when filter_mask is RTEXT_FILTER_BRVLAN.
      Signed-off-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      36cd0ffb