sh_eth_chip_reset_giga() doesn't really need to use direct iowrite32() when
writing  to the ARSTR register,  it can use sh_eth_tsu_write() as all other
chip_reset() methods.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that mdiobus_scan() doesn't return NULL on failure anymore, this driver
no  longer needs to check for it...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2016-05-07

Here are a few more Bluetooth patches for the 4.7 kernel:

 - NULL pointer fix in hci_intel driver
 - New Intel Bluetooth controller id in btusb driver
 - Added device tree binding documentation for Marvel's bt-sd8xxx
 - Platform specific wakeup interrupt support for btmrvl driver

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactor tcp_skb_cb to create two overlaping areas to store
state for incoming or outgoing skbs based on comments by
Neal Cardwell to tcp_nv patch:

   AFAICT this patch would not require an increase in the size of
   sk_buff cb[] if it were to take advantage of the fact that the
   tcp_skb_cb header.h4 and header.h6 fields are only used in the packet
   reception code path, and this in_flight field is only used on the
   transmit side.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using ifb+netem on ingress on SIT/IPIP/GRE traffic,
GRO packets are not properly processed.

Segmentation should not be forced, since ifb is already adding
quite a performance hit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TC_ACT_STOLEN is used when ingress traffic is mirred/redirected
to say ifb.

Packet is not dropped, but consumed.

Only TC_ACT_SHOT is a clear indication something went wrong.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of custom approach re-use generic helpers to convert byte to hex
format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On small embedded routers, one wants to control maximal amount of
memory used by fq_codel, instead of controlling number of packets or
bytes, since GRO/TSO make these not practical.

Assuming skb->truesize is accurate, we have to keep track of
skb->truesize sum for skbs in queue.

This patch adds a new TCA_FQ_CODEL_MEMORY_LIMIT attribute.

I chose a default value of 32 MBytes, which looks reasonable even
for heavy duty usages. (Prior fq_codel users should not be hurt
when they upgrade their kernels)

Two fields are added to tc_fq_codel_qd_stats to report :
 - Current memory usage
 - Number of drops caused by memory limits

# tc qd replace dev eth1 root est 1sec 4sec fq_codel memory_limit 4M
..
# tc -s -d qd sh dev eth1
qdisc fq_codel 8008: root refcnt 257 limit 10240p flows 1024
 quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
 Sent 2083566791363 bytes 1376214889 pkt (dropped 4994406, overlimits 0
requeues 21705223)
 rate 9841Mbit 812549pps backlog 3906120b 376p requeues 21705223
  maxpacket 68130 drop_overlimit 4994406 new_flow_count 28855414
  ecn_mark 0 memory_used 4190048 drop_overmemory 4994406
  new_flows_len 1 old_flows_len 177
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Dave Täht <dave.taht@gmail.com>
Cc: Sebastian Möller <moeller0@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an implementation of Qualcomm's IPC router protocol, used to
communicate with service providing remote processors.
Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
[bjorn: Cope with 0 being a valid node id and implement RTM_NEWADDR]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce compile stubs for the SMD API, allowing consumers to be
compile tested.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When cxgb4 is enabled with CONFIG_CHELSIO_T4_DCB set, VI enable command
gets called with DCB enabled. But when we have a back to back setup with
DCB enabled on one side and non-DCB on the Peer side. Firmware doesn't
send any DCB_L2_CFG, and DCB priority is never set for Tx queue.
But driver resets the queue priority and state machine whenever there
is a link down, this patch fixes it by adding a check to reset only if
cxgb4_dcb_enabled() returns true.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 0f433fa0 ("mlxsw: spectrum_buffers: Implement shared buffer configuration")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When creating macvtaps that are expected to have the same ifindex
in different network namespaces, only the first one will succeed.
The others will fail with a sysfs_warn_dup warning due to them trying
to create the following sysfs link (with 'NN' the ifindex of macvtapX):

/sys/class/macvtap/tapNN -> /sys/devices/virtual/net/macvtapX/tapNN

This is reproducible by running the following commands:

ip netns add ns1
ip netns add ns2
ip link add veth0 type veth peer name veth1
ip link set veth0 netns ns1
ip link set veth1 netns ns2
ip netns exec ns1 ip l add link veth0 macvtap0 type macvtap
ip netns exec ns2 ip l add link veth1 macvtap1 type macvtap

The last command will fail with "RTNETLINK answers: File exists" (along
with the kernel warning) but retrying it will work because the ifindex
was incremented.

The 'net' device class is isolated between network namespaces so each
one has its own hierarchy of net devices.
This isn't the case for the 'macvtap' device class.
The problem occurs half-way through the netdev registration, when
`macvtap_device_event` is called-back to create the 'tapNN' macvtap
class device under the 'macvtapX' net class device.

This patch adds namespace support to the 'macvtap' device class so
that /sys/class/macvtap is no longer shared between net namespaces.

However, making the macvtap sysfs class namespace-aware has the side
effect of changing /sys/devices/virtual/net/macvtapX/tapNN  into
/sys/devices/virtual/net/macvtapX/macvtap/tapNN.

This is due to Commit 24b1442d ("Driver-core: Always create class
directories for classses that support namespaces") and the fact that
class devices supporting namespaces are really not supposed to be placed
directly under other class devices.

To avoid breaking userland, a tapNN symlink pointing to macvtap/tapNN is
created inside the macvtapX directory.
Signed-off-by: Marc Angel <marc@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I forgot that ip_send_unicast_reply() is not BH safe (yet).

Disabling preemption before calling it was not a good move.

Fixes: c10d9310 ("tcp: do not assume TCP code is non preemptible")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andres Lagar-Cavilla  <andreslc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
bpf: introduce direct packet access

This set of patches introduce 'direct packet access' from
cls_bpf and act_bpf programs (which are root only).

Current bpf programs use LD_ABS, LD_INS instructions which have
to do 'if (off < skb_headlen)' for every packet access.
It's ok for socket filters, but too slow for XDP, since single
LD_ABS insn consumes 3% of cpu. Therefore we have to amortize the cost
of length check over multiple packet accesses via direct access
to skb->data, data_end pointers.

The existing packet parser typically look like:
  if (load_half(skb, offsetof(struct ethhdr, h_proto)) != ETH_P_IP)
     return 0;
  if (load_byte(skb, ETH_HLEN + offsetof(struct iphdr, protocol)) != IPPROTO_UDP ||
      load_byte(skb, ETH_HLEN) != 0x45)
     return 0;
  ...
with 'direct packet access' the bpf program becomes:
   void *data = (void *)(long)skb->data;
   void *data_end = (void *)(long)skb->data_end;
   struct eth_hdr *eth = data;
   struct iphdr *iph = data + sizeof(*eth);

   if (data + sizeof(*eth) + sizeof(*iph) + sizeof(*udp) > data_end)
      return 0;
   if (eth->h_proto != htons(ETH_P_IP))
      return 0;
   if (iph->protocol != IPPROTO_UDP || iph->ihl != 5)
      return 0;
   ...
which is more natural to write and significantly faster.
See patch 6 for performance tests:
21Mpps(old) vs 24Mpps(new) with just 5 loads.
For more complex parsers the performance gain is higher.

The other approach implemented in [1] was adding two new instructions
to interpreter and JITs and was too hard to use from llvm side.
The approach presented here doesn't need any instruction changes,
but the verifier has to work harder to check safety of the packet access.

Patch 1 prepares the code and Patch 2 adds new checks for direct
packet access and all of them are gated with 'env->allow_ptr_leaks'
which is true for root only.
Patch 3 improves search pruning for large programs.
Patch 4 wires in verifier's changes with net/core/filter side.
Patch 5 updates docs
Patches 6 and 7 add tests.

[1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dw
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

add few tests for "pointer to packet" logic of the verifier
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

parse_simple.c - packet parser exapmle with single length check that
filters out udp packets for port 9

parse_varlen.c - variable length parser that understand multiple vlan headers,
ipip, ipip6 and ip options to filter out udp or tcp packets on port 9.
The packet is parsed layer by layer with multitple length checks.

parse_ldabs.c - classic style of packet parsing using LD_ABS instruction.
Same functionality as parse_simple.

simple = 24.1Mpps per core
varlen = 22.7Mpps
ldabs  = 21.4Mpps

Parser with LD_ABS instructions is slower than full direct access parser
which does more packet accesses and checks.

These examples demonstrate the choice bpf program authors can make between
flexibility of the parser vs speed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

explain how verifier checks safety of packet access
and update email addresses.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

allow cls_bpf and act_bpf programs access skb->data and skb->data_end pointers.
The bpf helpers that change skb->data need to update data_end pointer as well.
The verifier checks that programs always reload data, data_end pointers
after calls to such bpf helpers.
We cannot add 'data_end' pointer to struct qdisc_skb_cb directly,
since it's embedded as-is by infiniband ipoib, so wrapper struct is needed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

since UNKNOWN_VALUE type is weaker than CONST_IMM we can un-teach
verifier its recognition of constants in conditional branches
without affecting safety.
Ex:
if (reg == 123) {
  .. here verifier was marking reg->type as CONST_IMM
     instead keep reg as UNKNOWN_VALUE
}

Two verifier states with UNKNOWN_VALUE are equivalent, whereas
CONST_IMM_X != CONST_IMM_Y, since CONST_IMM is used for stack range
verification and other cases.
So help search pruning by marking registers as UNKNOWN_VALUE
where possible instead of CONST_IMM.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extended BPF carried over two instructions from classic to access
packet data: LD_ABS and LD_IND. They're highly optimized in JITs,
but due to their design they have to do length check for every access.
When BPF is processing 20M packets per second single LD_ABS after JIT
is consuming 3% cpu. Hence the need to optimize it further by amortizing
the cost of 'off < skb_headlen' over multiple packet accesses.
One option is to introduce two new eBPF instructions LD_ABS_DW and LD_IND_DW
with similar usage as skb_header_pointer().
The kernel part for interpreter and x64 JIT was implemented in [1], but such
new insns behave like old ld_abs and abort the program with 'return 0' if
access is beyond linear data. Such hidden control flow is hard to workaround
plus changing JITs and rolling out new llvm is incovenient.

Therefore allow cls_bpf/act_bpf program access skb->data directly:
int bpf_prog(struct __sk_buff *skb)
{
  struct iphdr *ip;

  if (skb->data + sizeof(struct iphdr) + ETH_HLEN > skb->data_end)
      /* packet too small */
      return 0;

  ip = skb->data + ETH_HLEN;

  /* access IP header fields with direct loads */
  if (ip->version != 4 || ip->saddr == 0x7f000001)
      return 1;
  [...]
}

This solution avoids introduction of new instructions. llvm stays
the same and all JITs stay the same, but verifier has to work extra hard
to prove safety of the above program.

For XDP the direct store instructions can be allowed as well.

The skb->data is NET_IP_ALIGNED, so for common cases the verifier can check
the alignment. The complex packet parsers where packet pointer is adjusted
incrementally cannot be tracked for alignment, so allow byte access in such cases
and misaligned access on architectures that define efficient_unaligned_access

[1] https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/?h=ld_abs_dwSigned-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

cleanup verifier code and prepare it for addition of "pointer to packet" logic
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2016-05-05

This series contains updates to i40e and i40evf.

The theme behind this series is code reduction, yeah!  Jesse provides
most of the changes starting with a refactor of the interpretation of
a tunnel which lets us start using the hardware's parsing.  Removed
the packet split receive routine and ancillary code in preparation
for the Rx-refactor.  The refactor of the receive routine,
aligns the receive routine with the one in ixgbe which was highly
optimized.  The hardware supports a 16 byte descriptor for receive,
but the driver was never using it in production.  There was no performance
benefit to the real driver of 16 byte descriptors, so drop a whole lot
of complexity while getting rid of the code.  Fixed a bug where while
changing the number of descriptors using ethtool, the driver did not
test the limits of the system memory before permanently assuming it
would be able to get receive buffer memory.

Mitch fixes a memory leak of one page each time the driver is opened by
allocating the correct number of receive buffers and do not fiddle with
next_to_use in the VF driver.

Arnd Bergmann fixed a indentation issue by adding the appropriate
curly braces in i40e_vc_config_promiscuous_mode_msg().

Julia Lawall fixed an issue found by Coccinelle, where i40e_client_ops
structure can be const since it is never modified.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for Intel Bluetooth device 8265 also known
as Windstorm Peak (WsP).

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  6 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0a2b Rev= 0.10
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Tables have to exist for VRFs to function. Ensure they exist
when VRF device is created.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We recently had a system crash in the cnic module. Vmcore analysis confirmed
that "ip link up" was executed which failed due to an allocation failure
because of memory fragmentation. Futher analysis revealed that the cnic irq
vector was still allocated after the "ip link up" that failed. When
"ip link down" was executed it called free_msi_irqs() which crashed the system
because the cnic irq was still inuse.

PANIC: "kernel BUG at drivers/pci/msi.c:411!"

The code execution was:

cnic_netdev_event()
if (event == NETDEV_UP) {
.
.
       ▹       if (!cnic_start_hw(dev))
cnic_start_hw()
calls cnic_cm_open() which failed with -ENOMEM
cnic_start_hw() then took the err1 path:

err1:↩
       cp->free_resc(dev);↩ <---- frees resources but not irq vector
       pci_dev_put(dev->pcidev);↩
       return err;↩
}↩

This returns control back to cnic_netdev_event() but now the cnic irq vector
is still allocated even although cnic_cm_open() failed. The next
"ip link down" while trigger the crash.

The cnic_start_hw() routine is not handling the allocation failure correctly.
Fix this by checking whether CNIC_DRV_STATE_HANDLES_IRQ flag is set indicating
that the hardware has been started in cnic_start_hw(). If it has then call
cp->stop_hw() which frees the cnic irq vector and cnic resources. Otherwise
just maintain the previous behaviour and free cnic resources.

I reproduced this by injecting an ENOMEM error into cnic_cm_alloc_mem()s return
code.

# ip link set dev enpX down
# ip link set dev enpX up <--- hit's allocation failure
# ip link set dev enpX down <--- crashes here

With this patch I confirmed there was no crash in the reproducer.
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The i40e_client_ops structure is never modified, so declare it as const.

Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Newly added code in i40e_vc_config_promiscuous_mode_msg() is indented
in a way that gcc rightly complains about:

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c: In function 'i40e_vc_config_promiscuous_mode_msg':
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1543:4: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
    if (f->vlan >= 0 && f->vlan <= I40E_MAX_VLANID)
    ^~
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1550:5: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
     aq_err = pf->hw.aq.asq_last_status;

From the context, it looks like the aq_err assignment was meant to be
inside of the conditional expression, so I'm adding the appropriate
curly braces now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 5676a8b9 ("i40e: Add VF promiscuous mode driver support")
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When testing on systems with very limited amounts of RAM, a bug was
found where, while changing the number of descriptors using ethtool,
the driver didn't test the limits of system memory before permanently
assuming it would be able to get receive buffer memory.

Work around this issue by pre-allocation of the receive buffer
memory, in the "ghost" ring, which is then used during reinit
using the new ring length.

Change-Id: I92d7a5fb59a6c884b2efdd1ec652845f101c3359
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Allocate the correct number of RX buffers, and don't fiddle with
next_to_use. The common RX code handles all of this. This fixes a memory
leak of one page each time the driver is opened.

Change-Id: Id06eca353086e084921f047acad28c14745684ee
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The hardware supports a 16 byte descriptor for receive, but the
driver was never using it in production.  There was no performance
benefit to the real driver of 16 byte descriptors, so drop a whole
lot of complexity while getting rid of the code.

Also since the previous patch made us use no-split mode all the
time, drop any support in the driver for any other value in dtype
and assume it is always zero (aka no-split).

Hooray for code removal!

Change-ID: I2257e902e4dad84a07b94db6d2e6f4ce69b27bc0
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This is part 2 of the Rx refactor series, just including
changes to i40evf.

This refactor aligns the receive routine with the one in
ixgbe which was highly optimized.  This reduces the code
we have to maintain and allows for (hopefully) more readable
and maintainable RX hot path.

In order to do this:
- consolidate the receive path into a single function that doesn't
  use packet split but *does* use pages for Rx buffers.
- remove the old _1buf routine
- consolidate several routines into helper functions
- remove VF ethtool control over packet split
- remove priv_flags interface since it is unused
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

As part of preparation for the rx-refactor, remove the
packet split receive routine and ancillary code.

Some of the split related context set up code stays in
i40e_virtchnl_pf.c in case an older VF driver tries to load
and still wants to use packet split.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This is part 1 of the Rx refactor series, just including
changes to i40e.

This refactor aligns the receive routine with the one in
ixgbe which was highly optimized.  This reduces the code
we have to maintain and allows for (hopefully) more readable
and maintainable RX hot path.

In order to do this:
- consolidate the receive path into a single function that doesn't
  use packet split but *does* use pages for Rx buffers.
- remove the old _1buf routine
- consolidate several routines into helper functions
- remove ethtool control over packet split

Change-ID: I5ca100721de65992aa0114f8b4bac844b84758e0
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The dma_alloc_coherent() function returns a virtual address which can
be used for coherent access to the underlying memory.  On some
architectures, like arm64, undefined behavior results if this memory is
also accessed via virtual mappings that are not coherent.  Because of
their undefined nature, operations like virt_to_page() return garbage
when passed virtual addresses obtained from dma_alloc_coherent().  Any
subsequent mappings via vmap() of the garbage page values are unusable
and result in bad things like bus errors (synchronous aborts in ARM64
speak).

The mlx4 driver contains code that does the equivalent of:
vmap(virt_to_page(dma_alloc_coherent)), this results in an OOPs when the
device is opened.

Prevent Ethernet driver to run this problematic code by forcing it to
allocate contiguous memory. As for the Infiniband driver, at first we
are trying to allocate contiguous memory, but in case of failure roll
back to work with fragmented memory.
Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reported-by: David Daney <david.daney@cavium.com>
Tested-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

As part of the rx-refactor, the dtype variable in the i40e_ring
struct is no longer used, so remove it.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

As part of preparation for the rx-refactor, remove the
packet split receive routine and ancillary code.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Refactor the interpretation of a tunnel.  This removes
some code and lets us start using the hardware's parsing.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

With the recent "retirements" and other changes, make the maintainers
list a lot less confusing and a bit more straight forward.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Shannon Nelson <sln@onemain.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

percpu_counter only have protection against preemption.

TCP stack uses them possibly from BH, so we need BH protection
in contexts that could be run in process context

Fixes: c10d9310 ("tcp: do not assume TCP code is non preemptible")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>