- 10 Jan, 2018 37 commits
-
-
Colin Ian King authored
Variable read_size is initialized and this value is never read, it is instead set inside the do-loop, hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/net/ethernet/intel/i40e/i40e_nvm.c:390:6: warning: Value stored to 'read_size' during its initialization is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alice Michael authored
Bump the i40e driver from 2.1.14 to 2.3.2. Bump the i40evf driver from 3.0.1 to 3.2.2 Signed-off-by:
Alice Michael <alice.michael@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Jacob Keller authored
We introduced the virtchnl interface in order to have an interface for talking to a virtual device driver which was host-driver agnostic. This interface has its own definitions, including one for link speed. The host driver has to talk to the virtchnl interface using these new definitions in order to remain compatible. Today, the i40e link_speed enumerations are value-exact matches for the virtchnl interface, so it was originally decided to simply use a typecast. However, this is unsafe, and makes it easier for future drivers to continue this unsafe practice. There is nothing guaranteeing these values are exact, and the type-cast would hide any compiler warning which indicates the problem. Rather than rely on this type cast, introduce a helper function which can convert the AdminQ link speed definition into a virtchnl definition. This can then be used by host driver implementations in order to safely convert to the interface recognized by the virtual functions. If the link speed is not able to be represented by the virtchnl definitions we'll report UNKNOWN which is the safest result. This will ensure that should the driver specific link_speeds actual bit definitions change, we do not report them incorrectly according to the VF. Additionally, this provides a better pattern for future drivers to copy, as it is more likely a future device may not use the exact same bit-wise definition as the current virtchnl interface. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Jacob Keller authored
We currently notify a VF of the link state after ENABLE_QUEUES, which is the last thing a VF does after being configured. Guests may not actually ENABLE_QUEUES until they get configured, and thus between driver load and device configuration the VF may show inaccurate link status. Fix this by also sending the link state after GET_VF_RESOURCES. Although we could remove the message following ENABLE_QUEUES, it's not that significant of a loss, so this patch just keeps both to ensure maximum compatibility with guests on various OSes. Specifically, without this patch guests running FreeBSD will display inaccurate link state until the device is brought up. This is mostly a cosmetic issue but can be confusing to system administrators. Signed-off-by:
-
Jacob Keller authored
If i40evf_open() is called quickly at the same time as a reset occurs (such as via ethtool) it is possible for the device to attempt to open while a reset is in progress. This occurs because the driver was not holding the critical task bit lock during i40evf_open, nor was it holding it around the call to i40evf_up_complete() in i40evf_reset_task(). We didn't hold the lock previously because calls to i40evf_down() would take the bit lock directly, and this would have caused a deadlock. To avoid this, we'll move the bit lock handling out of i40evf_down() and into the callers of this function. Additionally, we'll now hold the bit lock over the entire set of steps when going up or down, to ensure that we remain consistent. Ultimately this causes us to serialize the transitions between down and up properly, and avoid changing status while we're resetting. Signed-off-by:
-
Jacob Keller authored
Although not strictly necessary, it is customary to reverse the order in which we release locks that we acquire. This helps preserve lock ordering during future refactors, which can help avoid potential deadlock situations. Signed-off-by:
-
Jacob Keller authored
Stop overloading the __I40EVF_IN_CRITICAL_TASK bit lock to protect the mac_filter_list and vlan_filter_list. Instead, implement a spinlock to protect these two lists, similar to how we protect the hash in the i40e PF code. Ensure that every place where we access the list uses the spinlock to ensure consistency, and stop holding the critical section around blocks of code which only need access to the macvlan filter lists. This refactor helps simplify the locking behavior, and is necessary as a future refactor to the __I40EVF_IN_CRITICAL_TASK would cause a deadlock otherwise. Signed-off-by:
-
Jacob Keller authored
In i40evf_reset_task we use netif_running() to determine whether or not the device is currently up. This allows us to properly free queue memory and shut down things before we request the hardware reset. It turns out that we cannot be guaranteed of netif_running() returning false until the device is fully up, as the kernel core code sets __LINK_STATE_START prior to calling .ndo_open. Since we're not holding the rtnl_lock(), it's possible that the driver's i40evf_open handler function is currently being called while we're resetting. We can't simply hold the rtnl_lock() while checking netif_running() as this could cause a deadlock with the i40evf_open() function. Additionally, we can't avoid the deadlock by holding the rtnl_lock() over the whole reset path, as this essentially serializes all resets, and can cause massive delays if we have multiple VFs on a system. Instead, lets just check our own internal state __I40EVF_RUNNING state field. This allows us to ensure that the state is correct and is only set after we've finished bringing the device up. Without this change we might free data structures about device queues and other memory before they've been fully allocated. Signed-off-by:
-
Alice Michael authored
Display some more stats that were already being counted, to help users understand when priority xon/xoff packets are being sent/received Signed-off-by:
-
Jesper Dangaard Brouer authored
The commit e817f856 ("xdp: generic XDP handling of xdp_rxq_info") removed some ifdef CONFIG_SYSFS in net/core/dev.c, but forgot to remove the corresponding ifdef's in include/linux/netdevice.h. Fixes: e817f856 ("xdp: generic XDP handling of xdp_rxq_info") Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Tested-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The internal PHYs in the mv88e6390 switch have a temperature sensor. It uses a different register layout to other PHY currently supported. It also has an errata, in that some reads of the sensor result in bad values. So a number of reads need to be made, and the average taken. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Andy Gospodarek says: ==================== net: create dynamic software irq moderation library This converts the dynamic interrupt moderation library from the mlx5e driver into a library so it can be used by any driver. The penultimate patch in this set adds support for this new dynamic interrupt moderation library in the bnxt_en driver and the last patch creates an entry in the MAINTAINERS file for this library. The main purpose of this code is to allow an administrator to make sure that default coalesce settings are optimized for low latency, but quickly adapt to handle high throughput/bulk traffic by altering how much time passes before popping an interrupt. For any new driver the following changes would be needed to use this library: - add elements in ring struct to track items needed by this library - create function that can be called to actually set coalesce settings for the driver Credit to Rob Rice and Lee Reed for doing some of the initial proof of concept and testing for this patch and Tal Gilboa and Or Gerlitz for their comments, etc on this set. v4: Fix build breakage for VF representers noticed by kbuild test robot. Thanks for being so courteous, kbuild test robot! v3: bnxt_en fix from Michael Chan, comment suggestion from Vasundhara Volam, and small mlx5e header file fix from Tal Gilboa. v2: Spelling fixes from Stephen Hemminger, bnxt_en suggestions from Michael Chan, spelling and formatting fixes from Or Gerlitz, and spelling and mlx5e changes suggested by Tal Gilboa. ==================== Signed-off-by: -
Andy Gospodarek authored
Signed-off-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
Tal Gilboa <talgi@mellanox.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Andy Gospodarek authored
This implements the changes needed for the bnxt_en driver to add support for dynamic interrupt moderation per ring. This does add additional counters in the receive path, but testing shows that any additional instructions are offset by throughput gain when the default configuration is for low latency. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Andy Gospodarek authored
Simplify the arguments net_dim() by formatting them into a struct net_dim_sample before calling the function. Signed-off-by:
-
Andy Gospodarek authored
This move allows drivers to add private structure elements to track the number of packets, bytes, and interrupts events per ring. A driver also defines a workqueue handler to act on this collected data once per poll and modify the coalescing parameters per ring. Signed-off-by:
-
Andy Gospodarek authored
Change all appropriate mlx5_am* and MLX5_AM* references to net_dim and NET_DIM, respectively, in code that handles dynamic interrupt moderation. Also change all references from 'am' to 'dim' when used as local variables and add generic profile references. Signed-off-by:
-
Andy Gospodarek authored
These functions were identified as ones that could be made generic and used by multiple drivers. Most of the contents of en_rx_am.c are moved to net_dim.c. Signed-off-by:
-
Andy Gospodarek authored
More movement to help make this code more generic. Signed-off-by:
-
Andy Gospodarek authored
This makes mlx5e_am_sample more generic so that it can be called easily from a driver that does not use the same data structure to store these values in a single structure. Signed-off-by:
-
Andy Gospodarek authored
Move these to newly created file to prepare to move these functions to a library. Signed-off-by:
-
Andy Gospodarek authored
Create new header file to prepare to move code that handles irq moderation to a library that lives in a header file. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== ipv6: Add support for non-equal-cost multipath This set aims to add support for IPv6 non-equal-cost multipath routes. The first three patches convert multipath selection to use the hash-threshold method (RFC 2992) instead of modulo-N. The same method is employed by the IPv4 routing code since commit 0e884c78 ("ipv4: L3 hash-based multipath"). Unlike modulo-N, with hash-threshold only the flows near the region boundaries are affected when a nexthop is added or removed. In addition, it allows us to easily add support for non-equal-cost multipath in the last patch by sizing the different regions according to the provided weights. ==================== Signed-off-by:
-
Ido Schimmel authored
The use of hash-threshold instead of modulo-N makes it trivial to add support for non-equal-cost multipath. Instead of dividing the multipath hash function's output space equally between the nexthops, each nexthop is assigned a region size which is proportional to its weight. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Ido Schimmel authored
Now that each nexthop stores its region boundary in the multipath hash function's output space, we can use hash-threshold instead of modulo-N in multipath selection. This reduces the number of checks we need to perform during lookup, as dead and linkdown nexthops are assigned a negative region boundary. In addition, in contrast to modulo-N, only flows near region boundaries are affected when a nexthop is added or removed. Signed-off-by:
-
Ido Schimmel authored
The hash thresholds assigned to IPv6 nexthops are in the range of [-1, 2^31 - 1], where a negative value is assigned to nexthops that should not be considered during multipath selection. Therefore, in a similar fashion to IPv4, we need to use the upper 31-bits of the multipath hash for multipath selection. Signed-off-by:
-
Ido Schimmel authored
Before we convert IPv6 to use hash-threshold instead of modulo-N, we first need each nexthop to store its region boundary in the hash function's output space. The boundary is calculated by dividing the output space equally between the different active nexthops. That is, nexthops that are not dead or linkdown. The boundaries are rebalanced whenever a nexthop is added or removed to a multipath route and whenever a nexthop becomes active or inactive. Signed-off-by:
-
Jason Wang authored
This patch tries to batched used ring update during RX. This is pretty fit for the case when guest is much faster (e.g dpdk based backend). In this case, used ring is almost empty: - we may get serious cache line misses/contending on both used ring and used idx. - at most 1 packet could be dequeued at one time, batching in guest does not make much effect. Update used ring in a batch can help since guest won't access the used ring until used idx was advanced for several descriptors and since we advance used ring for every N packets, guest will only need to access used idx for every N packet since it can cache the used idx. To have a better interaction for both batch dequeuing and dpdk batching, VHOST_RX_BATCH was used as the maximum number of descriptors that could be batched. Test were done between two machines with 2.40GHz Intel(R) Xeon(R) CPU E5-2630 connected back to back through ixgbe. Traffic were generated on one remote ixgbe through MoonGen and measure the RX pps through testpmd in guest when do xdp_redirect_map from local ixgbe to tap. RX pps were increased from 3.05 Mpps to 4.00 Mpps (about 31% improvement). One possible concern for this is the implications for TCP (especially latency sensitive workload). Result[1] does not show obvious changes for most of the netperf test (RR, TX, and RX). And we do get some improvements for RX on some specific size. Guest RX: size/sessions/+thu%/+normalize% 64/ 1/ +2%/ +2% 64/ 2/ +2%/ -1% 64/ 4/ +1%/ +1% 64/ 8/ 0%/ 0% 256/ 1/ +6%/ -3% 256/ 2/ -3%/ +2% 256/ 4/ +11%/ +11% 256/ 8/ 0%/ 0% 512/ 1/ +4%/ 0% 512/ 2/ +2%/ +2% 512/ 4/ 0%/ -1% 512/ 8/ -8%/ -8% 1024/ 1/ -7%/ -17% 1024/ 2/ -8%/ -7% 1024/ 4/ +1%/ 0% 1024/ 8/ 0%/ 0% 2048/ 1/ +30%/ +14% 2048/ 2/ +46%/ +40% 2048/ 4/ 0%/ 0% 2048/ 8/ 0%/ 0% 4096/ 1/ +23%/ +22% 4096/ 2/ +26%/ +23% 4096/ 4/ 0%/ +1% 4096/ 8/ 0%/ 0% 16384/ 1/ -2%/ -3% 16384/ 2/ +1%/ -4% 16384/ 4/ -1%/ -3% 16384/ 8/ 0%/ -1% 65535/ 1/ +15%/ +7% 65535/ 2/ +4%/ +7% 65535/ 4/ 0%/ +1% 65535/ 8/ 0%/ 0% TCP_RR: size/sessions/+thu%/+normalize% 1/ 1/ 0%/ +1% 1/ 25/ +2%/ +1% 1/ 50/ +4%/ +1% 64/ 1/ 0%/ -4% 64/ 25/ +2%/ +1% 64/ 50/ 0%/ -1% 256/ 1/ 0%/ 0% 256/ 25/ 0%/ 0% 256/ 50/ +4%/ +2% Guest TX: size/sessions/+thu%/+normalize% 64/ 1/ +4%/ -2% 64/ 2/ -6%/ -5% 64/ 4/ +3%/ +6% 64/ 8/ 0%/ +3% 256/ 1/ +15%/ +16% 256/ 2/ +11%/ +12% 256/ 4/ +1%/ 0% 256/ 8/ +5%/ +5% 512/ 1/ -1%/ -6% 512/ 2/ 0%/ -8% 512/ 4/ -2%/ +4% 512/ 8/ +6%/ +9% 1024/ 1/ +3%/ +1% 1024/ 2/ +3%/ +9% 1024/ 4/ 0%/ +7% 1024/ 8/ 0%/ +7% 2048/ 1/ +8%/ +2% 2048/ 2/ +3%/ -1% 2048/ 4/ -1%/ +11% 2048/ 8/ +3%/ +9% 4096/ 1/ +8%/ +8% 4096/ 2/ 0%/ -7% 4096/ 4/ +4%/ +4% 4096/ 8/ +2%/ +5% 16384/ 1/ -3%/ +1% 16384/ 2/ -1%/ -12% 16384/ 4/ -1%/ +5% 16384/ 8/ 0%/ +1% 65535/ 1/ 0%/ -3% 65535/ 2/ +5%/ +16% 65535/ 4/ +1%/ +2% 65535/ 8/ +1%/ -1% Signed-off-by:Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
mlx5-updates-2018-01-08 Four patches from Or that add Hairpin support to mlx5: =========================================================== From: Or Gerlitz <ogerlitz@mellanox.com> We refer the ability of NIC HW to fwd packet received on one port to the other port (also from a port to itself) as hairpin. The application API is based on ingress tc/flower rules set on the NIC with the mirred redirect action. Other actions can apply to packets during the redirect. Hairpin allows to offload the data-path of various SW DDoS gateways, load-balancers, etc to HW. Packets go through all the required processing in HW (header re-write, encap/decap, push/pop vlan) and then forwarded, CPU stays at practically zero usage. HW Flow counters are used by the control plane for monitoring and accounting. Hairpin is implemented by pairing a receive queue (RQ) to send queue (SQ). All the flows that share <recv NIC, mirred NIC> are redirected through the same hairpin pair. Currently, only header-rewrite is supported as a packet modification action. I'd like to thanks Elijah Shakkour <elijahs@mellanox.com> for implementing this functionality on HW simulator, before it was avail in the FW so the driver code could be tested early. =========================================================== From Feras three patches that provide very small changes that allow IPoIB to support RX timestamping for child interfaces, simply by hooking the mlx5e timestamping PTP ioctl to IPoIB child interface netdev profile. One patch from Gal to fix a spilling mistake. Two patches from Eugenia adds drop counters to VF statistics to be reported as part of VF statistics in netlink (iproute2) and implemented them in mlx5 eswitch. Signed-off-by: -
David S. Miller authored
Peng Li says: ==================== code improvements in HNS3 driver This patchset fixes 2 comments for community review. [patch 1/2] reverts "net: hns3: Add packet statistics of netdev" reported by Jakub Kicinski and David Miller. [patch 2/2] reports the function type the same line with hns3_nic_get_stats64, reported by Andrew Lunn. ==================== Signed-off-by: -
Peng Li authored
The function type should be on the same line with the function name, or it may cause display error if a patch edit the function. There is am example following: https://www.spinics.net/lists/netdev/msg476141.htmlSigned-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Peng Li authored
This reverts commit 84910007. It is duplicate to add statistics of netdev for ethtool -S. Signed-off-by:
-
David S. Miller authored
Jassi Brar says: ==================== Socionext Synquacer NETSEC driver Changes since v5 # Removed helper macros # Removed 'inline' qualifier # Changed multiline empty comment to single line # Added 'clock-names' property in DT binding example # Ignore 'clock-names' property in driver until f/ws in the wild are upgraded or we support instance that take in more than one clock. # Rebased the patchset onto net-next Changes since v4 # Fixed ucode indexing as a word, instead of byte # Removed redundant clocks, keep only phy rate reference clock and expect it to be 'phy_ref_clk' Changes since v3 # Discard 'socionext,snq-mdio', and simply use 'mdio' subnode. # Use ioremap on ucode region as well, instead of memremap. Changes since v2 # Use 'mdio' subnode in DT bindings. # Use phy_interface_mode_is_rgmii(), instead of open coding the check. # Use readl/b with eeprom_base pointer. # Unregister mdio bus upon failure in probe. Changes since v1 # Switched from using memremap to ioremap # Implemented ndo_do_ioctl callback # Defined optional 'dma-coherent' DT property ==================== Signed-off-by: -
Jassi Brar authored
Add entry for the Socionext Netsec controller driver and DT bindings. Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by:
-
Jassi Brar authored
This driver adds support for Socionext "netsec" IP Gigabit Ethernet + PHY IP used in the Synquacer SC2A11 SoC. Signed-off-by:
-
Jassi Brar authored
This patch adds documentation for Device-Tree bindings for the Socionext NetSec Controller driver. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2018-01-09 This series contains updates to ixgbe and ixgbevf only. Emil fixes an issue with "wake on LAN"(WoL) where we need to ensure we enable the reception of multicast packets so that WoL works for IPv6 magic packets. Cleaned up code no longer needed with the update to adaptive ITR. Paul update the driver to advertise the highest capable link speed when a module gets inserted. Also extended the displaying of firmware version to include the iSCSI and OEM block in the EEPROM to better identify firmware versions/images. Tonghao Zhang cleans up a code comment that no longer applies since InterruptThrottleRate has been removed from the driver. Alex fixes SR-IOV and MACVLAN offload interaction, where the MACVLAN offload was incorrectly configuring several filters with the wrong pool value which resulted in MACLVAN interfaces not being able to receive traffic that had to pass over the physical interface. Fixed transmit hangs and dropped receive frames when the number of VFs changed. Added support for RSS on MACVLAN pools for X550 devices. Fixed up the MACVLAN limitations so we can now support 63 offloaded devices. Cleaned up MACVLAN code that is no longer needed with the recent changes and fixes. ==================== Signed-off-by:
-
- 09 Jan, 2018 3 commits
-
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: improve runtime pm On my system with two network ports I found that runtime PM didn't suspend the unused port. Therefore I checked runtime pm in this driver in somewhat more detail and this series improves runtime pm in general and solves the mentioned issue. Tested on a system with RTL8168evl (MAC version 34). ==================== Signed-off-by: -
Heiner Kallweit authored
So far rpm doesn't cover cases like unused ports which are never brought up. If they are active at probe time they remain in this state. Included in this patch: - Let the idle notification check whether we can suspend and let it schedule the suspend. This way we don't need to have calls to pm_schedule_suspend in different places. - At the end of rtl_open and rtl_init_one send an idle notification to allow suspending if the link is down. If a cable is plugged in aneg is finished before the suspend timer expires and the suspend request is cancelled. - Change rtl8169_runtime_suspend to power down the chip if the interface is down. Successfully tested on a RTL8168evl (mac version 34). Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
This patch partially reverts commit e4fbce74 "r8169: Fix runtime power management" from 2010. At that time the suspend delay was 100ms and therefore suspending happened during initial aneg. Currently suspend delay is 5s, so suspend starts after aneg and the issue doesn't exist any longer. On my system aneg takes almost 3s, to be on the safe side let's increase the suspend delay to 10s. Signed-off-by:
-
