In the loadbalance arp monitoring scheme, when a slave link change is
detected, the slave->link is immediately updated and slave_state_changed
is set. Later down the function, the rtnl_lock is acquired and the
changes are committed, updating the bond link state.

However, the acquisition of the rtnl_lock can fail. The next time the
monitor runs, since slave->link is already updated, it determines that
link is unchanged. This results in the bond link state permanently out
of sync with the slave link.

This patch modifies bond_loadbalance_arp_mon() to handle link changes
identical to bond_ab_arp_{inspect/commit}(). The new link state is
maintained in slave->new_link until we're ready to commit at which point
it's copied into slave->link.

NOTE: miimon_{inspect/commit}() has a more complex state machine
requiring the use of the bond_{propose,commit}_link_state() functions
which maintains the intermediate state in slave->link_new_state. The arp
monitors don't require that.

Testing: This bug is very easy to reproduce with the following steps.
1. In a loop, toggle a slave link of a bond slave interface.
2. In a separate loop, do ifconfig up/down of an unrelated interface to
create contention for rtnl_lock.
Within a few iterations, the bond link goes out of sync with the slave
link.
Signed-off-by: Nithin Nayak Sujir <nsujir@tintri.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some JITs can optimize comparisons with zero.  Add a couple of
BPF_JSGE tests against immediate zero.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Various BPF fixes

Follow-up to fix incorrect pruning when alignment tracking is
in use and to properly clear regs after call to not leave stale
data behind, also a fix that adds bpf_clone_redirect to the
bpf_helper_changes_pkt_data helper and exposes correct map_flags
for lpm map into fdinfo. For details, please see individual
patches.

v1 -> v2:
  - Reworked first patch so that env->strict_alignment is the
    final indicator on whether we have to deal with strict
    alignment rather than having CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
    checks on various locations, so only checking env->strict_alignment
    is sufficient after that. Thanks for spotting, Dave!
  - Added patch 3 and 4.
  - Rest as is.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds various verifier test cases:

1) A test case for the pruning issue when tracking alignment
   is used.
2) Various PTR_TO_MAP_VALUE_OR_NULL tests to make sure pointer
   arithmetic turns such register into UNKNOWN_VALUE type.
3) Test cases for the special treatment of LD_ABS/LD_IND to
   make sure verifier doesn't break calling convention here.
   Latter is needed, since f.e. arm64 JIT uses r1 - r5 for
   storing temporary data, so they really must be marked as
   NOT_INIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

trie_alloc() always needs to have BPF_F_NO_PREALLOC passed in via
attr->map_flags, since it does not support preallocation yet. We
check the flag, but we never copy the flag into trie->map.map_flags,
which is later on exposed into fdinfo and used by loaders such as
iproute2. Latter uses this in bpf_map_selfcheck_pinned() to test
whether a pinned map has the same spec as the one from the BPF obj
file and if not, bails out, which is currently the case for lpm
since it exposes always 0 as flags.

Also copy over flags in array_map_alloc() and stack_map_alloc().
They always have to be 0 right now, but we should make sure to not
miss to copy them over at a later point in time when we add actual
flags for them to use.

Fixes: b95a5c4d ("bpf: add a longest prefix match trie map implementation")
Reported-by: Jarno Rajahalme <jarno@covalent.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bpf_clone_redirect() still needs to be listed in
bpf_helper_changes_pkt_data() since we call into
bpf_try_make_head_writable() from there, thus we need
to invalidate prior pkt regs as well.

Fixes: 36bbef52 ("bpf: direct packet write and access for helpers for clsact progs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, after performing helper calls, we clear all caller saved
registers, that is r0 - r5 and fill r0 depending on struct bpf_func_proto
specification. The way we reset these regs can affect pruning decisions
in later paths, since we only reset register's imm to 0 and type to
NOT_INIT. However, we leave out clearing of other variables such as id,
min_value, max_value, etc, which can later on lead to pruning mismatches
due to stale data.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, when we enforce alignment tracking on direct packet access,
the verifier lets the following program pass despite doing a packet
write with unaligned access:

  0: (61) r2 = *(u32 *)(r1 +76)
  1: (61) r3 = *(u32 *)(r1 +80)
  2: (61) r7 = *(u32 *)(r1 +8)
  3: (bf) r0 = r2
  4: (07) r0 += 14
  5: (25) if r7 > 0x1 goto pc+4
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp
  6: (2d) if r0 > r3 goto pc+1
   R0=pkt(id=0,off=14,r=14) R1=ctx R2=pkt(id=0,off=0,r=14)
   R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp
  7: (63) *(u32 *)(r0 -4) = r0
  8: (b7) r0 = 0
  9: (95) exit

  from 6 to 8:
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp
  8: (b7) r0 = 0
  9: (95) exit

  from 5 to 10:
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=2 R10=fp
  10: (07) r0 += 1
  11: (05) goto pc-6
  6: safe                           <----- here, wrongly found safe
  processed 15 insns

However, if we enforce a pruning mismatch by adding state into r8
which is then being mismatched in states_equal(), we find that for
the otherwise same program, the verifier detects a misaligned packet
access when actually walking that path:

  0: (61) r2 = *(u32 *)(r1 +76)
  1: (61) r3 = *(u32 *)(r1 +80)
  2: (61) r7 = *(u32 *)(r1 +8)
  3: (b7) r8 = 1
  4: (bf) r0 = r2
  5: (07) r0 += 14
  6: (25) if r7 > 0x1 goto pc+4
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=0,max_value=1
   R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
  7: (2d) if r0 > r3 goto pc+1
   R0=pkt(id=0,off=14,r=14) R1=ctx R2=pkt(id=0,off=0,r=14)
   R3=pkt_end R7=inv,min_value=0,max_value=1
   R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
  8: (63) *(u32 *)(r0 -4) = r0
  9: (b7) r0 = 0
  10: (95) exit

  from 7 to 9:
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=0,max_value=1
   R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
  9: (b7) r0 = 0
  10: (95) exit

  from 6 to 11:
   R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
   R3=pkt_end R7=inv,min_value=2
   R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
  11: (07) r0 += 1
  12: (b7) r8 = 0
  13: (05) goto pc-7                <----- mismatch due to r8
  7: (2d) if r0 > r3 goto pc+1
   R0=pkt(id=0,off=15,r=15) R1=ctx R2=pkt(id=0,off=0,r=15)
   R3=pkt_end R7=inv,min_value=2
   R8=imm0,min_value=0,max_value=0,min_align=2147483648 R10=fp
  8: (63) *(u32 *)(r0 -4) = r0
  misaligned packet access off 2+15+-4 size 4

The reason why we fail to see it in states_equal() is that the
third test in compare_ptrs_to_packet() ...

  if (old->off <= cur->off &&
      old->off >= old->range && cur->off >= cur->range)
          return true;

... will let the above pass. The situation we run into is that
old->off <= cur->off (14 <= 15), meaning that prior walked paths
went with smaller offset, which was later used in the packet
access after successful packet range check and found to be safe
already.

For example: Given is R0=pkt(id=0,off=0,r=0). Adding offset 14
as in above program to it, results in R0=pkt(id=0,off=14,r=0)
before the packet range test. Now, testing this against R3=pkt_end
with 'if r0 > r3 goto out' will transform R0 into R0=pkt(id=0,off=14,r=14)
for the case when we're within bounds. A write into the packet
at offset *(u32 *)(r0 -4), that is, 2 + 14 -4, is valid and
aligned (2 is for NET_IP_ALIGN). After processing this with
all fall-through paths, we later on check paths from branches.
When the above skb->mark test is true, then we jump near the
end of the program, perform r0 += 1, and jump back to the
'if r0 > r3 goto out' test we've visited earlier already. This
time, R0 is of type R0=pkt(id=0,off=15,r=0), and we'll prune
that part because this time we'll have a larger safe packet
range, and we already found that with off=14 all further insn
were already safe, so it's safe as well with a larger off.
However, the problem is that the subsequent write into the packet
with 2 + 15 -4 is then unaligned, and not caught by the alignment
tracking. Note that min_align, aux_off, and aux_off_align were
all 0 in this example.

Since we cannot tell at this time what kind of packet access was
performed in the prior walk and what minimal requirements it has
(we might do so in the future, but that requires more complexity),
fix it to disable this pruning case for strict alignment for now,
and let the verifier do check such paths instead. With that applied,
the test cases pass and reject the program due to misalignment.

Fixes: d1174416 ("bpf: Track alignment of register values in the verifier.")
Reference: http://patchwork.ozlabs.org/patch/761909/Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 7d472a59 ("arp: always override
existing neigh entries with gratuitous ARP") introduced a compiler
warning:

net/ipv4/arp.c:880:35: warning: 'addr_type' may be used uninitialized in
this function [-Wmaybe-uninitialized]

While the code logic seems to be correct and doesn't allow the variable
to be used uninitialized, and the warning is not consistently
reproducible, it's still worth fixing it for other people not to waste
time looking at the warning in case it pops up in the build environment.
Yes, compiler is probably at fault, but we will need to accommodate.

Fixes: 7d472a59 ("arp: always override existing neigh entries with gratuitous ARP")
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fastopen API should be used to perform fastopen operations on the TCP
socket. It does not make sense to use fastopen API to perform disconnect
by calling it with AF_UNSPEC. The fastopen data path is also prone to
race conditions and bugs when using with AF_UNSPEC.

One issue reported and analyzed by Vegard Nossum is as follows:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Thread A:                            Thread B:
------------------------------------------------------------------------
sendto()
 - tcp_sendmsg()
     - sk_stream_memory_free() = 0
         - goto wait_for_sndbuf
	     - sk_stream_wait_memory()
	        - sk_wait_event() // sleep
          |                          sendto(flags=MSG_FASTOPEN, dest_addr=AF_UNSPEC)
	  |                           - tcp_sendmsg()
	  |                              - tcp_sendmsg_fastopen()
	  |                                 - __inet_stream_connect()
	  |                                    - tcp_disconnect() //because of AF_UNSPEC
	  |                                       - tcp_transmit_skb()// send RST
	  |                                    - return 0; // no reconnect!
	  |                           - sk_stream_wait_connect()
	  |                                 - sock_error()
	  |                                    - xchg(&sk->sk_err, 0)
	  |                                    - return -ECONNRESET
	- ... // wake up, see sk->sk_err == 0
    - skb_entail() on TCP_CLOSE socket

If the connection is reopened then we will send a brand new SYN packet
after thread A has already queued a buffer. At this point I think the
socket internal state (sequence numbers etc.) becomes messed up.

When the new connection is closed, the FIN-ACK is rejected because the
sequence number is outside the window. The other side tries to
retransmit,
but __tcp_retransmit_skb() calls tcp_trim_head() on an empty skb which
corrupts the skb data length and hits a BUG() in copy_and_csum_bits().
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Hence, this patch adds a check for AF_UNSPEC in the fastopen data path
and return EOPNOTSUPP to user if such case happens.

Fixes: cf60af03 ("tcp: Fast Open client - sendmsg(MSG_FASTOPEN)")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The default value for somaxconn is set in sysctl_core_net_init(), but this
function is not called when kernel is configured without CONFIG_SYSCTL.

This results in the kernel not being able to accept TCP connections,
because the backlog has zero size. Usually, the user ends up with:
"TCP: request_sock_TCP: Possible SYN flooding on port 7. Dropping request.  Check SNMP counters."
If SYN cookies are not enabled the connection is rejected.

Before ef547f2a (tcp: remove max_qlen_log), the effects were less
severe, because the backlog was always at least eight slots long.
Signed-off-by: Roman Kapl <roman.kapl@sysgo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add null check to avoid a potential null pointer dereference.

Addresses-Coverity-ID: 1408831
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since 9b4437a5 ("geneve: Unify LWT and netdev handling.") fill_info
does not return UDP_ZERO_CSUM6_RX when using COLLECT_METADATA. This is
because it uses ip_tunnel_info_af() with the device level info, which is
not valid for COLLECT_METADATA.

Fix by checking for the presence of the actual sockets.

Fixes: 9b4437a5 ("geneve: Unify LWT and netdev handling.")
Signed-off-by: Eric Garver <e@erig.me>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
BPF pruning follow-up

Follow-up to fix incorrect pruning when alignment tracking is
in use and to properly clear regs after call to not leave stale
data behind. For details, please see individual patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since virtio does not provide it's own ndo_features_check handler,
TSO, and now checksum offload, are disabled for stacked vlans.
Re-enable the support and let the host take care of it.  This
restores/improves Guest-to-Guest performance over Q-in-Q vlans.
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

At least some of the be2net cards do not seem to be capabled
of performing checksum offload computions on Q-in-Q packets.
In these case, the recevied checksum on the remote is invalid
and TCP syn packets are dropped.

This patch adds a call to check disbled acceleration features
on Q-in-Q tagged traffic.

CC: Sathya Perla <sathya.perla@broadcom.com>
CC: Ajit Khaparde <ajit.khaparde@broadcom.com>
CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
CC: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It appears that TCP checksum offloading has been broken for
Q-in-Q vlans.  The behavior was execerbated by the
series
    commit afb0bc97 ("Merge branch 'stacked_vlan_tso'")
that that enabled accleleration features on stacked vlans.

However, event without that series, it is possible to trigger
this issue.  It just requires a lot more specialized configuration.

The root cause is the interaction between how
netdev_intersect_features() works, the features actually set on
the vlan devices and HW having the ability to run checksum with
longer headers.

The issue starts when netdev_interesect_features() replaces
NETIF_F_HW_CSUM with a combination of NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM,
if the HW advertises IP|IPV6 specific checksums.  This happens
for tagged and multi-tagged packets.   However, HW that enables
IP|IPV6 checksum offloading doesn't gurantee that packets with
arbitrarily long headers can be checksummed.

This patch disables IP|IPV6 checksums on the packet for multi-tagged
packets.

CC: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
CC: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 88m1101 has an errata when configuring autoneg. However, it was
being applied to many other Marvell PHYs as well. Limit its scope to
just the 88m1101.

Fixes: 76884679 ("phylib: Add support for Marvell 88e1111S and 88e1145")
Reported-by: Daniel Walker <danielwa@cisco.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Harini Katakam <harinik@xilinx.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix build errors by making this driver depend on OF_MDIO, like
several other similar drivers do.

drivers/built-in.o: In function `octeon_mdiobus_remove':
mdio-octeon.c:(.text+0x196ee0): undefined reference to `mdiobus_unregister'
mdio-octeon.c:(.text+0x196ee8): undefined reference to `mdiobus_free'
drivers/built-in.o: In function `octeon_mdiobus_probe':
mdio-octeon.c:(.text+0x196f1d): undefined reference to `devm_mdiobus_alloc_size'
mdio-octeon.c:(.text+0x196ffe): undefined reference to `of_mdiobus_register'
mdio-octeon.c:(.text+0x197010): undefined reference to `mdiobus_free'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc:	Andrew Lunn <andrew@lunn.ch>
Cc:	Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-fixes-2017-05-23

Some TC offloads fixes from Or Gerlitz.
From Erez, mlx5 IPoIB RX fix to improve GRO.
From Mohamad, Command interface fix to improve mitigation against FW
commands timeouts.
From Tariq, Driver load Tolerance against affinity settings failures.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2017-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just two fixes this time:
 * fix the scheduled scan "BUG: scheduling while atomic"
 * check mesh address extension flags more strictly
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnl_fdb_dump() failed to check the result of nlmsg_parse(), which led
to contents of |ifm| being uninitialized because nlh->nlmsglen was too
small to accommodate |ifm|. The uninitialized data may affect some
branches and result in unwanted effects, although kernel data doesn't
seem to leak to the userspace directly.

The bug has been detected with KMSAN and syzkaller.

For the record, here is the KMSAN report:

==================================================================
BUG: KMSAN: use of unitialized memory in rtnl_fdb_dump+0x5dc/0x1000
CPU: 0 PID: 1039 Comm: probe Not tainted 4.11.0-rc5+ #2727
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16
 dump_stack+0x143/0x1b0 lib/dump_stack.c:52
 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007
 __kmsan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:491
 rtnl_fdb_dump+0x5dc/0x1000 net/core/rtnetlink.c:3230
 netlink_dump+0x84f/0x1190 net/netlink/af_netlink.c:2168
 __netlink_dump_start+0xc97/0xe50 net/netlink/af_netlink.c:2258
 netlink_dump_start ./include/linux/netlink.h:165
 rtnetlink_rcv_msg+0xae9/0xb40 net/core/rtnetlink.c:4094
 netlink_rcv_skb+0x339/0x5a0 net/netlink/af_netlink.c:2339
 rtnetlink_rcv+0x83/0xa0 net/core/rtnetlink.c:4110
 netlink_unicast_kernel net/netlink/af_netlink.c:1272
 netlink_unicast+0x13b7/0x1480 net/netlink/af_netlink.c:1298
 netlink_sendmsg+0x10b8/0x10f0 net/netlink/af_netlink.c:1844
 sock_sendmsg_nosec net/socket.c:633
 sock_sendmsg net/socket.c:643
 ___sys_sendmsg+0xd4b/0x10f0 net/socket.c:1997
 __sys_sendmsg net/socket.c:2031
 SYSC_sendmsg+0x2c6/0x3f0 net/socket.c:2042
 SyS_sendmsg+0x87/0xb0 net/socket.c:2038
 do_syscall_64+0x102/0x150 arch/x86/entry/common.c:285
 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246
RIP: 0033:0x401300
RSP: 002b:00007ffc3b0e6d58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000401300
RDX: 0000000000000000 RSI: 00007ffc3b0e6d80 RDI: 0000000000000003
RBP: 00007ffc3b0e6e00 R08: 000000000000000b R09: 0000000000000004
R10: 000000000000000d R11: 0000000000000246 R12: 0000000000000000
R13: 00000000004065a0 R14: 0000000000406630 R15: 0000000000000000
origin: 000000008fe00056
 save_stack_trace+0x59/0x60 arch/x86/kernel/stacktrace.c:59
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:352
 kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:247
 kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:260
 slab_alloc_node mm/slub.c:2743
 __kmalloc_node_track_caller+0x1f4/0x390 mm/slub.c:4349
 __kmalloc_reserve net/core/skbuff.c:138
 __alloc_skb+0x2cd/0x740 net/core/skbuff.c:231
 alloc_skb ./include/linux/skbuff.h:933
 netlink_alloc_large_skb net/netlink/af_netlink.c:1144
 netlink_sendmsg+0x934/0x10f0 net/netlink/af_netlink.c:1819
 sock_sendmsg_nosec net/socket.c:633
 sock_sendmsg net/socket.c:643
 ___sys_sendmsg+0xd4b/0x10f0 net/socket.c:1997
 __sys_sendmsg net/socket.c:2031
 SYSC_sendmsg+0x2c6/0x3f0 net/socket.c:2042
 SyS_sendmsg+0x87/0xb0 net/socket.c:2038
 do_syscall_64+0x102/0x150 arch/x86/entry/common.c:285
 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246
==================================================================

and the reproducer:

==================================================================
  #include <sys/socket.h>
  #include <net/if_arp.h>
  #include <linux/netlink.h>
  #include <stdint.h>

  int main()
  {
    int sock = socket(PF_NETLINK, SOCK_DGRAM | SOCK_NONBLOCK, 0);
    struct msghdr msg;
    memset(&msg, 0, sizeof(msg));
    char nlmsg_buf[32];
    memset(nlmsg_buf, 0, sizeof(nlmsg_buf));
    struct nlmsghdr *nlmsg = nlmsg_buf;
    nlmsg->nlmsg_len = 0x11;
    nlmsg->nlmsg_type = 0x1e; // RTM_NEWROUTE = RTM_BASE + 0x0e
    // type = 0x0e = 1110b
    // kind = 2
    nlmsg->nlmsg_flags = 0x101; // NLM_F_ROOT | NLM_F_REQUEST
    nlmsg->nlmsg_seq = 0;
    nlmsg->nlmsg_pid = 0;
    nlmsg_buf[16] = (char)7;
    struct iovec iov;
    iov.iov_base = nlmsg_buf;
    iov.iov_len = 17;
    msg.msg_iov = &iov;
    msg.msg_iovlen = 1;
    sendmsg(sock, &msg, 0);
    return 0;
  }
==================================================================
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some PHY require to wait for a bit after the reset GPIO has been
toggled. This adds support for the DT property `phy-reset-post-delay`
which gives the delay in milliseconds to wait after reset.

If the DT property is not given, no delay is observed. Post reset delay
greater than 1000ms are invalid.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: a bunch of fixes for processing dupcookie

After introducing transport hashtable and per stream info into sctp,
some regressions were caused when processing dupcookie, this patchset
is to fix them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

After sctp changed to use transport hashtable, a transport would be
added into global hashtable when adding the peer to an asoc, then
the asoc can be got by searching the transport in the hashtbale.

The problem is when processing dupcookie in sctp_sf_do_5_2_4_dupcook,
a new asoc would be created. A peer with the same addr and port as
the one in the old asoc might be added into the new asoc, but fail
to be added into the hashtable, as they also belong to the same sk.

It causes that sctp's dupcookie processing can not really work.

Since the new asoc will be freed after copying it's information to
the old asoc, it's more like a temp asoc. So this patch is to fix
it by setting it as a temp asoc to avoid adding it's any transport
into the hashtable and also avoid allocing assoc_id.

An extra thing it has to do is to also alloc stream info for any
temp asoc, as sctp dupcookie process needs it to update old asoc.
But I don't think it would hurt something, as a temp asoc would
always be freed after finishing processing cookie echo packet.
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 3dbcc105 ("sctp: alloc stream info when initializing
asoc"), stream and stream.out info are always alloced when creating
an asoc.

So it's not correct to check !asoc->stream before updating stream
info when processing dupcookie, but would be better to check asoc
state instead.

Fixes: 3dbcc105 ("sctp: alloc stream info when initializing asoc")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Masks for extracting part of the Completion Queue Entry (CQE)
field rss_hash_type was swapped, namely CQE_RSS_HTYPE_IP and
CQE_RSS_HTYPE_L4.

The bug resulted in setting skb->l4_hash, even-though the
rss_hash_type indicated that hash was NOT computed over the
L4 (UDP or TCP) part of the packet.

Added comments from the datasheet, to make it more clear what
these masks are selecting.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some devices need their multicast filter reset but others are crashed by that.
So the methods need to be separated.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: "Ridgway, Keith" <kridgway@harris.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2017-05-23

1) Fix wrong header offset for esp4 udpencap packets.

2) Fix a stack access out of bounds when creating a bundle
   with sub policies. From Sabrina Dubroca.

3) Fix slab-out-of-bounds in pfkey due to an incorrect
   sadb_x_sec_len calculation.

4) We checked the wrong feature flags when taking down
   an interface with IPsec offload enabled.
   Fix from Ilan Tayari.

5) Copy the anti replay sequence numbers when doing a state
   migration, otherwise we get out of sync with the sequence
   numbers. Fix from Antony Antony.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add tolerance to failures of irq_set_affinity_hint().
Its role is to give hints that optimizes performance,
and should not block the driver load.

In non-SMP systems, functionality is not available as
there is a single core, and all these calls definitely
fail.  Hence, do not call the function and avoid the
warning prints.

Fixes: db058a18 ("net/mlx5_core: Set irq affinity hints")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Currently when firmware command gets stuck or it takes long time to
complete, the driver command will get timeout and the command slot is
freed and can be used for new commands, and if the firmware receive new
command on the old busy slot its behavior is unexpected and this could
be harmful.
To fix this when the driver command gets timeout we return failure,
but we don't free the command slot and we wait for the firmware to
explicitly respond to that command.
Once all the entries are busy we will stop processing new firmware
commands.

Fixes: 9cba4ebc ('net/mlx5: Fix potential deadlock in command mode change')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

IPoIB packet contains the pseudo header area, we need to pull it prior
to reset_mac_header in order to let the GRO work well.

In more details:
GRO checks the mac address of the new coming packet, it does that by
comparing the hard_header_len size of the current packet to the previous
one in that session, the comparison is over hard_header_len size.
Now, the driver prepares that area in the skb by allocating area from the
reserved part and resetting the correct mac header to it.

Fixes: 9d6bd752 ("net/mlx5e: IPoIB, RX handler")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The sparse tool emits these correct complaints:

drivers/net/ethernet/mellanox/mlx5/core//en_tc.c:1005:25: warning: cast to restricted __be32
drivers/net/ethernet/mellanox/mlx5/core//en_tc.c:1007:25: warning: cast to restricted __be16

The value is provided from user-space in network order, but there's
no way for them to realize that, avoid the warnings by casting to the
appropriate type.

Fixes: d79b6df6 ('net/mlx5e: Add parsing of TC pedit actions to HW format')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Currently we don't support partial header re-writes through TC pedit
action offloading. However, the code that enforces that wasn't err-ing
on cases where the first and last bits of the mask are set but there is
some zero bit between them, such as in the below example, fix that!

tc filter add dev enp1s0 protocol ip parent ffff: prio 10 flower
	ip_proto udp dst_port 2001 skip_sw
	action pedit munge ip src set 1.0.0.1 retain 0xff0000ff

Fixes: d79b6df6 ('net/mlx5e: Add parsing of TC pedit actions to HW format')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When offloading header re-writes, the HW re-calculates the relevant L3/L4
checksums. Hence, when upper layers (as done by OVS) ask for TC checksum action
offload together with pedit offload, don't err. This command now works:

tc filter add dev ens1f0 protocol ip parent ffff: prio 20 flower skip_sw
	ip_proto tcp dst_port 9001
	action pedit ex munge tcp dport set 0x1234 pipe
        action csum tcp
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add the accessors for realizing if this is a csum action,
and for which fields checksum is needed.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

We wrongly direcly invoke hlist_del_rcu() and not hash_del_rcu() which
does a slightly different call now and may change later, fix that.

Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Drivers should be able to call cfg80211_sched_scan_results() from atomic
context. However, with the introduction of multiple scheduled scan feature
this requirement was not taken into account resulting in regression shown
below.

[  119.021594] BUG: scheduling while atomic: irq/47-iwlwifi/517/0x00000200
[  119.021604] Modules linked in: [...]
[  119.021759] CPU: 1 PID: 517 Comm: irq/47-iwlwifi Not tainted 4.12.0-rc2-t440s-20170522+ #1
[  119.021763] Hardware name: LENOVO 20AQS03H00/20AQS03H00, BIOS GJET91WW (2.41 ) 09/21/2016
[  119.021766] Call Trace:
[  119.021778]  ? dump_stack+0x5c/0x84
[  119.021784]  ? __schedule_bug+0x4c/0x70
[  119.021792]  ? __schedule+0x496/0x5c0
[  119.021798]  ? schedule+0x2d/0x80
[  119.021804]  ? schedule_preempt_disabled+0x5/0x10
[  119.021810]  ? __mutex_lock.isra.0+0x18e/0x4c0
[  119.021817]  ? __wake_up+0x2f/0x50
[  119.021833]  ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211]
[  119.021844]  ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211]
[  119.021859]  ? iwl_mvm_rx_lmac_scan_iter_complete_notif+0x17/0x30 [iwlmvm]
[  119.021869]  ? iwl_pcie_rx_handle+0x2a9/0x7e0 [iwlwifi]
[  119.021878]  ? iwl_pcie_irq_handler+0x17c/0x730 [iwlwifi]
[  119.021884]  ? irq_forced_thread_fn+0x60/0x60
[  119.021887]  ? irq_thread_fn+0x16/0x40
[  119.021892]  ? irq_thread+0x109/0x180
[  119.021896]  ? wake_threads_waitq+0x30/0x30
[  119.021901]  ? kthread+0xf2/0x130
[  119.021905]  ? irq_thread_dtor+0x90/0x90
[  119.021910]  ? kthread_create_on_node+0x40/0x40
[  119.021915]  ? ret_from_fork+0x26/0x40

Fixes: b34939b9 ("cfg80211: add request id to cfg80211_sched_scan_*() api")
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Pull pstore fix from Kees Cook:
 "Marta noticed another misbehavior in EFI pstore, which this fixes.

  Hopefully this is the last of the v4.12 fixes for pstore!"

* tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  efi-pstore: Fix write/erase id tracking

Pull ACPI fixes from Rafael Wysocki:
 "These revert a 4.11 change that turned out to be problematic and add a
  .gitignore file.

  Specifics:

   - Revert a 4.11 commit related to the ACPI-based handling of laptop
     lids that made changes incompatible with existing user space stacks
     and broke things there (Lv Zheng).

   - Add .gitignore to the ACPI tools directory (Prarit Bhargava)"

* tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI / button: Remove lid_init_state=method mode"
  tools/power/acpi: Add .gitignore file