Skip to content

L
linux
Switch branch/tag
  1. 15 Nov, 2016 1 commit
    • Vittorio Gambaletta (VittGam)'s avatar
      ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards. · 79e57dd1
      Vittorio Gambaletta (VittGam) authored 
      The active_high LED of my Wistron DNMA-92 is still being recognized as
active_low on 4.7.6 mainline. When I was preparing my former commit
0f9edcdd ("ath9k: Fix LED polarity for some Mini PCI AR9220 MB92
cards.") to fix that I must have somehow messed up with testing, because
I tested the final version of that patch before sending it, and it was
apparently working; but now it is not working on 4.7.6 mainline.

I initially added the PCI_DEVICE_SUB section for 0x0029/0x2096 above the
PCI_VDEVICE section for 0x0029; but then I moved the former below the
latter after seeing how 0x002A sections were sorted in the file.

This turned out to be wrong: if a generic PCI_VDEVICE entry (that has
both subvendor and subdevice IDs set to PCI_ANY_ID) is put before a more
specific one (PCI_DEVICE_SUB), then the generic PCI_VDEVICE entry will
match first and will be used.

With this patch, 0x0029/0x2096 has finally got active_high LED on 4.7.6.

While I'm at it, let's fix 0x002A too by also moving its generic definition
below its specific ones.

Fixes: 0f9edcdd ("ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.")
Cc: <stable@vger.kernel.org> #4.7+
Signed-off-by: default avatarVittorio Gambaletta <linuxbugs@vittgam.net>
[kvalo@qca.qualcomm.com: improve the commit log based on email discussions]
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      79e57dd1
  3. 09 Nov, 2016 1 commit
  5. 27 Oct, 2016 1 commit
  7. 26 Oct, 2016 17 commits
  9. 23 Oct, 2016 11 commits
  11. 22 Oct, 2016 7 commits
    • David S. Miller's avatar
      Merge branch 'bpf-numa-id' · 67dc1596
      David S. Miller authored 
      Daniel Borkmann says:

====================
Add BPF numa id helper

This patch set adds a helper for retrieving current numa node
id and a test case for SO_REUSEPORT.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      67dc1596
    • Daniel Borkmann's avatar
      reuseport, bpf: add test case for bpf_get_numa_node_id · 3c2c3c16
      Daniel Borkmann authored 
      The test case is very similar to reuseport_bpf_cpu, only that here
we select socket members based on current numa node id.

  # numactl -H
  available: 2 nodes (0-1)
  node 0 cpus: 0 1 2 3 4 5 12 13 14 15 16 17
  node 0 size: 128867 MB
  node 0 free: 120080 MB
  node 1 cpus: 6 7 8 9 10 11 18 19 20 21 22 23
  node 1 size: 96765 MB
  node 1 free: 87504 MB
  node distances:
  node   0   1
    0:  10  20
    1:  20  10

  # ./reuseport_bpf_numa
  ---- IPv4 UDP ----
  send node 0, receive socket 0
  send node 1, receive socket 1
  send node 1, receive socket 1
  send node 0, receive socket 0
  ---- IPv6 UDP ----
  send node 0, receive socket 0
  send node 1, receive socket 1
  send node 1, receive socket 1
  send node 0, receive socket 0
  ---- IPv4 TCP ----
  send node 0, receive socket 0
  send node 1, receive socket 1
  send node 1, receive socket 1
  send node 0, receive socket 0
  ---- IPv6 TCP ----
  send node 0, receive socket 0
  send node 1, receive socket 1
  send node 1, receive socket 1
  send node 0, receive socket 0
  SUCCESS
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3c2c3c16
    • Daniel Borkmann's avatar
      bpf: add helper for retrieving current numa node id · 2d0e30c3
      Daniel Borkmann authored 
      Use case is mainly for soreuseport to select sockets for the local
numa node, but since generic, lets also add this for other networking
and tracing program types.
Suggested-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Acked-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2d0e30c3
    • David S. Miller's avatar
      Merge branch 'udpmem' · a10b91b8
      David S. Miller authored 
      Paolo Abeni says:

====================
udp: refactor memory accounting

This patch series refactor the udp memory accounting, replacing the
generic implementation with a custom one, in order to remove the needs for
locking the socket on the enqueue and dequeue operations. The socket backlog
usage is dropped, as well.

The first patch factor out pieces of some queue and memory management
socket helpers, so that they can later be used by the udp memory accounting
functions.
The second patch adds the memory account helpers, without using them.
The third patch replacse the old rx memory accounting path for udp over ipv4 and
udp over ipv6. In kernel UDP users are updated, as well.

The memory accounting schema is described in detail in the individual patch
commit message.

The performance gain depends on the specific scenario; with few flows (and
little contention in the original code) the differences are in the noise range,
while with several flows contending the same socket, the measured speed-up
is relevant (e.g. even over 100% in case of extreme contention)

Many thanks to Eric Dumazet for the reiterated reviews and suggestions.

v5 -> v6:
 - do not orphan the skb on enqueue, skb_steal_sock() already did
   the work for us

v4 -> v5:
 - use the receive queue spin lock to protect the memory accounting
 - several minor clean-up

v3 -> v4:
 - simplified the locking schema, always use a plain spinlock

v2 -> v3:
 - do not set the now unsed backlog_rcv callback

v1 -> v2:
 - changed slighly the memory accounting schema, we now perform lazy reclaim
 - fixed forward_alloc updating issue
 - fixed memory counter integer overflows
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a10b91b8
    • Paolo Abeni's avatar
      udp: use it's own memory accounting schema · 850cbadd
      Paolo Abeni authored 
      Completely avoid default sock memory accounting and replace it
with udp-specific accounting.

Since the new memory accounting model encapsulates completely
the required locking, remove the socket lock on both enqueue and
dequeue, and avoid using the backlog on enqueue.

Be sure to clean-up rx queue memory on socket destruction, using
udp its own sk_destruct.

Tested using pktgen with random src port, 64 bytes packet,
wire-speed on a 10G link as sender and udp_sink as the receiver,
using an l4 tuple rxhash to stress the contention, and one or more
udp_sink instances with reuseport.

nr readers      Kpps (vanilla)  Kpps (patched)
1               170             440
3               1250            2150
6               3000            3650
9               4200            4450
12              5700            6250

v4 -> v5:
  - avoid unneeded test in first_packet_length

v3 -> v4:
  - remove useless sk_rcvqueues_full() call

v2 -> v3:
  - do not set the now unsed backlog_rcv callback

v1 -> v2:
  - add memory pressure support
  - fixed dropwatch accounting for ipv6
Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
Acked-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      850cbadd
    • Paolo Abeni's avatar
      udp: implement memory accounting helpers · f970bd9e
      Paolo Abeni authored 
      Avoid using the generic helpers.
Use the receive queue spin lock to protect the memory
accounting operation, both on enqueue and on dequeue.

On dequeue perform partial memory reclaiming, trying to
leave a quantum of forward allocated memory.

On enqueue use a custom helper, to allow some optimizations:
- use a plain spin_lock() variant instead of the slightly
  costly spin_lock_irqsave(),
- avoid dst_force check, since the calling code has already
  dropped the skb dst
- avoid orphaning the skb, since skb_steal_sock() already did
  the work for us

The above needs custom memory reclaiming on shutdown, provided
by the udp_destruct_sock().

v5 -> v6:
  - don't orphan the skb on enqueue

v4 -> v5:
  - replace the mem_lock with the receive queue spin lock
  - ensure that the bh is always allowed to enqueue at least
    a skb, even if sk_rcvbuf is exceeded

v3 -> v4:
  - reworked memory accunting, simplifying the schema
  - provide an helper for both memory scheduling and enqueuing

v1 -> v2:
  - use a udp specific destrctor to perform memory reclaiming
  - remove a couple of helpers, unneeded after the above cleanup
  - do not reclaim memory on dequeue if not under memory
    pressure
  - reworked the fwd accounting schema to avoid potential
    integer overflow
Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
Acked-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f970bd9e
    • Paolo Abeni's avatar
      net/socket: factor out helpers for memory and queue manipulation · f8c3bf00
      Paolo Abeni authored 
      Basic sock operations that udp code can use with its own
memory accounting schema. No functional change is introduced
in the existing APIs.

v4 -> v5:
  - avoid whitespace changes

v2 -> v4:
  - avoid exporting __sock_enqueue_skb

v1 -> v2:
  - avoid export sock_rmem_free
Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
Acked-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f8c3bf00
  13. 21 Oct, 2016 2 commits
    • Jarod Wilson's avatar
      net: remove MTU limits on a few ether_setup callers · 8b1efc0f
      Jarod Wilson authored 
      These few drivers call ether_setup(), but have no ndo_change_mtu, and thus
were overlooked for changes to MTU range checking behavior. They
previously had no range checks, so for feature-parity, set their min_mtu
to 0 and max_mtu to ETH_MAX_MTU (65535), instead of the 68 and 1500
inherited from the ether_setup() changes. Fine-tuning can come after we get
back to full feature-parity here.

CC: netdev@vger.kernel.org
Reported-by: default avatarAsbjoern Sloth Toennesen <asbjorn@asbjorn.st>
CC: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st>
CC: R Parameswaran <parameswaran.r7@gmail.com>
Signed-off-by: default avatarJarod Wilson <jarod@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8b1efc0f
    • Vitaly Kuznetsov's avatar
      hv_netvsc: fix a race between netvsc_send() and netvsc_init_buf() · e8f0a89c
      Vitaly Kuznetsov authored 
      Fix in commit 88098834 ("hv_netvsc: set nvdev link after populating
chn_table") turns out to be incomplete. A crash in
netvsc_get_next_send_section() is observed on mtu change when the device
is under load. The race I identified is: if we get to netvsc_send() after
we set net_device_ctx->nvdev link in netvsc_device_add() but before we
finish netvsc_connect_vsp()->netvsc_init_buf() send_section_map is not
allocated and we crash. Unfortunately we can't set net_device_ctx->nvdev
link after the netvsc_init_buf() call as during the negotiation we need
to receive packets and on the receive path we check for it. It would
probably be possible to split nvdev into a pair of nvdev_in and nvdev_out
links and check them accordingly in get_outbound_net_device()/
get_inbound_net_device() but this looks like an overkill.

Check that send_section_map is allocated in netvsc_send().
Signed-off-by: default avatarVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e8f0a89c
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7