Skip to content

L
linux
Switch branch/tag
  1. 12 Sep, 2016 4 commits
  3. 11 Sep, 2016 1 commit
  5. 10 Sep, 2016 4 commits
  7. 09 Sep, 2016 8 commits
  9. 08 Sep, 2016 9 commits
  11. 07 Sep, 2016 3 commits
  13. 06 Sep, 2016 6 commits
    • Wei Yongjun's avatar
      ipv6: addrconf: fix dev refcont leak when DAD failed · 751eb6b6
      Wei Yongjun authored 
      In general, when DAD detected IPv6 duplicate address, ifp->state
will be set to INET6_IFADDR_STATE_ERRDAD and DAD is stopped by a
delayed work, the call tree should be like this:

ndisc_recv_ns
  -> addrconf_dad_failure        <- missing ifp put
     -> addrconf_mod_dad_work
       -> schedule addrconf_dad_work()
         -> addrconf_dad_stop()  <- missing ifp hold before call it

addrconf_dad_failure() called with ifp refcont holding but not put.
addrconf_dad_work() call addrconf_dad_stop() without extra holding
refcount. This will not cause any issue normally.

But the race between addrconf_dad_failure() and addrconf_dad_work()
may cause ifp refcount leak and netdevice can not be unregister,
dmesg show the following messages:

IPv6: eth0: IPv6 duplicate address fe80::XX:XXXX:XXXX:XX detected!
...
unregister_netdevice: waiting for eth0 to become free. Usage count = 1

Cc: stable@vger.kernel.org
Fixes: c15b1cca ("ipv6: move DAD and addrconf_verify processing
to workqueue")
Signed-off-by: default avatarWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      751eb6b6
    • Michael Chan's avatar
      bnxt_en: Fix TX push operation on ARM64. · 9d13744b
      Michael Chan authored 
      There is a code path where we are calling __iowrite64_copy() on
an address that is not 64-bit aligned.  This causes an exception on
some architectures such as arm64.  Fix that code path by using
__iowrite32_copy().
Reported-by: default avatarJD Zheng <jiandong.zheng@broadcom.com>
Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9d13744b
    • Mark Tomlinson's avatar
      net: Don't delete routes in different VRFs · 5a56a0b3
      Mark Tomlinson authored 
      When deleting an IP address from an interface, there is a clean-up of
routes which refer to this local address. However, there was no check to
see that the VRF matched. This meant that deletion wasn't confined to
the VRF it should have been.

To solve this, a new field has been added to fib_info to hold a table
id. When removing fib entries corresponding to a local ip address, this
table id is also used in the comparison.

The table id is populated when the fib_info is created. This was already
done in some places, but not in ip_rt_ioctl(). This has now been fixed.

Fixes: 021dd3b8 ("net: Add routes to the table associated with the device")
Acked-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
Tested-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: default avatarMark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5a56a0b3
    • Sudip Mukherjee's avatar
      net: smsc: remove build warning of duplicate definition · daa7ee8d
      Sudip Mukherjee authored 
      The build of m32r was giving warning:

In file included from drivers/net/ethernet/smsc/smc91x.c:92:0:
drivers/net/ethernet/smsc/smc91x.h:448:0: warning: "SMC_inb" redefined
 #define SMC_inb(ioaddr, reg)  ({ BUG(); 0; })

drivers/net/ethernet/smsc/smc91x.h:106:0:
	note: this is the location of the previous definition
 #define SMC_inb(a, r)  inb(((u32)a) + (r))

drivers/net/ethernet/smsc/smc91x.h:449:0: warning: "SMC_outb" redefined
 #define SMC_outb(x, ioaddr, reg) BUG()

drivers/net/ethernet/smsc/smc91x.h:108:0:
	note: this is the location of the previous definition
 #define SMC_outb(v, a, r) outb(v, ((u32)a) + (r))
Signed-off-by: default avatarSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      daa7ee8d
    • Helmut Buchsbaum's avatar
      net: macb: initialize checksum when using checksum offloading · 007e4ba3
      Helmut Buchsbaum authored 
      I'm still struggling to get this fix right..

Changes since v2:
 - do not blindly modify SKB contents according to Dave's legitimate
   objection

Changes since v1:
 - dropped disabling HW checksum offload for Zynq
 - initialize checksum similar to net/ethernet/freescale/fec_main.c

-- >8 --
MACB/GEM needs the checksum field initialized to 0 to get correct
results on transmit in all cases, e.g. on Zynq, UDP packets with
payload <= 2 otherwise contain a wrong checksums.
Signed-off-by: default avatarHelmut Buchsbaum <helmut.buchsbaum@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      007e4ba3
    • Dave Jones's avatar
      ipv6: release dst in ping_v6_sendmsg · 03c2778a
      Dave Jones authored 
      Neither the failure or success paths of ping_v6_sendmsg release
the dst it acquires.  This leads to a flood of warnings from
"net/core/dst.c:288 dst_release" on older kernels that
don't have 8bf4ada2 backported.

That patch optimistically hoped this had been fixed post 3.10, but
it seems at least one case wasn't, where I've seen this triggered
a lot from machines doing unprivileged icmp sockets.

Cc: Martin Lau <kafai@fb.com>
Signed-off-by: default avatarDave Jones <davej@codemonkey.org.uk>
Acked-by: default avatarMartin KaFai Lau <kafai@fb.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      03c2778a
  15. 04 Sep, 2016 5 commits
    • Linus Torvalds's avatar
      af_unix: split 'u->readlock' into two: 'iolock' and 'bindlock' · 6e1ce3c3
      Linus Torvalds authored 
      Right now we use the 'readlock' both for protecting some of the af_unix
IO path and for making the bind be single-threaded.

The two are independent, but using the same lock makes for a nasty
deadlock due to ordering with regards to filesystem locking.  The bind
locking would want to nest outside the VSF pathname locking, but the IO
locking wants to nest inside some of those same locks.

We tried to fix this earlier with commit c845acb3 ("af_unix: Fix
splice-bind deadlock") which moved the readlock inside the vfs locks,
but that caused problems with overlayfs that will then call back into
filesystem routines that take the lock in the wrong order anyway.

Splitting the locks means that we can go back to having the bind lock be
the outermost lock, and we don't have any deadlocks with lock ordering.
Acked-by: default avatarRainer Weikusat <rweikusat@cyberadapt.com>
Acked-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6e1ce3c3
    • Linus Torvalds's avatar
      Revert "af_unix: Fix splice-bind deadlock" · 38f7bd94
      Linus Torvalds authored 
      This reverts commit c845acb3.

It turns out that it just replaces one deadlock with another one: we can
still get the wrong lock ordering with the readlock due to overlayfs
calling back into the filesystem layer and still taking the vfs locks
after the readlock.

The proper solution ends up being to just split the readlock into two
pieces: the bind lock (taken *outside* the vfs locks) and the IO lock
(taken *inside* the filesystem locks).  The two locks are independent
anyway.
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: default avatarShmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      38f7bd94
    • David S. Miller's avatar
      Merge branch 'vxlan-fixes' · 2f83a53a
      David S. Miller authored 
      Jiri Benc says:

====================
vxlan: fix error reporting

This patchset improves checking for invalid configuration in VXLAN and
fixes problems with duplicated and inappropriate error messages.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2f83a53a
    • Jiri Benc's avatar
      vxlan: fix duplicated and wrong error messages · 3555621d
      Jiri Benc authored 
      vxlan_dev_configure outputs error messages before returning, no need to
print again the same mesages in vxlan_newlink. Also, vxlan_dev_configure may
return a particular error code for a different reason than vxlan_newlink
thinks.

Move the remaining error messages into vxlan_dev_configure and let
vxlan_newlink just pass on the error code.
Signed-off-by: default avatarJiri Benc <jbenc@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3555621d
    • Jiri Benc's avatar
      vxlan: reject multicast destination without an interface · 9b4cdd51
      Jiri Benc authored 
      Currently, kernel accepts configurations such as:

  ip l a type vxlan dstport 4789 id 1 group 239.192.0.1
  ip l a type vxlan dstport 4789 id 1 group ff0e::110

However, neither of those really works. In the IPv4 case, the interface
cannot be brought up ("RTNETLINK answers: No such device"). This is because
multicast join will be rejected without the interface being specified.

In the IPv6 case, multicast wil be joined on the first interface found. This
is not what the user wants as it depends on random factors (order of
interfaces).

Note that it's possible to add a local address but it doesn't solve
anything. For IPv4, it's not considered in the multicast join (thus the same
error as above is returned on ifup). This could be added but it wouldn't
help for IPv6 anyway. For IPv6, we do need the interface.

Just reject a configuration that sets multicast address and does not provide
an interface. Nobody can depend on the previous behavior as it never worked.
Signed-off-by: default avatarJiri Benc <jbenc@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9b4cdd51
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7