- 13 Feb, 2014 40 commits
-
-
Johan Hedberg authored
Now that ATT sockets have been converted to use the new L2CAP_CHAN_FIXED type there is no need to have an extra check for chan->psm in the l2cap_chan_close function. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
The l2cap_chan->psm value is always set to a valid value for a connection oriented channel. The l2cap_chan->sport is used for tracking local PSM allocations but will not always have a proper value, such as with connected sockets derived from a listening socket. This patch fixes the sock_getname callback to always use chan->psm when returning address information. Signed-off-by:
-
Johan Hedberg authored
When we're not connected the peer address information is undefined. This patch fixes the remote address getting to return a proper error in case the sate is anything else than BT_CONNECTED. Signed-off-by:
-
Johan Hedberg authored
When we're not connected the peer address information is undefined. This patch fixes the remote address getting to return a proper error in case the state is anything else than BT_CONNECTED. Signed-off-by:
-
Johan Hedberg authored
The sport variable is used to track the allocation of the local PSM database to ensure no two sockets take the same local PSM. It is acquired upon bind() but needs to be freed up if the socket ends up becoming a client one. This patch adds the clearing of the value when l2cap_chan_connect is called. Signed-off-by:
-
Johan Hedberg authored
The L2CAP specification requires us to disconnect an L2CAP channel if the remote side gives us credits beyond 65535. This patch makes sure we disconnect the channel in such a situation. Signed-off-by:
-
Johan Hedberg authored
The L2CAP specification requires us to disconnect a channel if the remote device sends us data when it doesn't have any credits to do so. This patch makes sure that we send the appropriate L2CAP Disconnect request in this situation. Signed-off-by:
-
Johan Hedberg authored
There's a le_default_mps variable that can be modified through debugfs but it was never actually used for determining our MPS value. This patch fixes the MPS initialization to use the variable instead of a fixed value. Signed-off-by:
-
Johan Hedberg authored
Fixed channels have the same source and destination CID. Ensure that the values get properly initialized when receiving incoming connections and deriving values from the parent socket. Signed-off-by:
-
Johan Hedberg authored
The BT_SECURITY option should also be allowed for fixed channels, so punch the appropriate hole for it when checking for the channel type. The main user of fixed CID user space sockets is right now ATT (which is broken without this patch). Signed-off-by:
-
Johan Hedberg authored
ATT channels are not connection oriented so having them use L2CAP_CHAN_CONN_ORIENTED is quite confusing. Instead, use the new L2CAP_CHAN_FIXED type and ensure that the MTU and CID values get properly set. Signed-off-by:
-
Johan Hedberg authored
There's no reason why A2MP should need or deserve its on channel type. Instead we should be able to group all fixed CID users under a single channel type and reuse as much code as possible for them. Where CID specific exceptions are needed the chan-scid value can be used. This patch renames the current A2MP channel type to a generic one and thereby paves the way to allow converting ATT and SMP (and any future fixed channel protocols) to use the new channel type. Signed-off-by:
-
Johan Hedberg authored
The only user of l2cap_seq_list_remove() was l2cap_seq_list_pop() which only removes the head, meaning only the "else if (seq_list->head == seq)" branch was ever being used. This patch moves the code from this branch straight into l2cap_seq_list_pop() and removes the (now useless) l2cap_seq_list_remove(). Signed-off-by:
-
Johan Hedberg authored
This patch adds a queue for incoming L2CAP data that's received before l2cap_connect_cfm is called and processes the data once l2cap_connect_cfm is called. This way we ensure that we have e.g. all remote features before processing L2CAP signaling data (which is very important for making the correct security decisions). The processing of the pending rx data needs to be done through queue_work since unlike l2cap_recv_acldata, l2cap_connect_cfm is called with the hci_dev lock held which could cause potential deadlocks. Signed-off-by:
-
Johan Hedberg authored
This patch moves the l2cap_conn_add, is_valid_psm and l2cap_chan_connect functions further down in l2cap_core.c. The patch doesn't contain anything else except the relocation of these functions. By moving the functions further down the patch enables a subsequent patch that adds a pending RX queue to be implemented without a forward declaration of a function. Signed-off-by:
-
Oliver Neukum authored
The device is not functional without firmware. The device without firmware: T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=311f Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb The device with firmware: T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=3007 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oliver Neukum authored
The device will bind to btusb without firmware, but with the original buggy firmware device discovery does not work. No devices are detected. Device descriptor without firmware: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=311e Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms with firmware: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=311e Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
-
Marcel Holtmann authored
For debugging purposes of Secure Connection Only support a simple debugfs entry is used to indicate if this mode is active or not. Signed-off-by:
-
Marcel Holtmann authored
With the introduction of security level 4, the RFCOMM sockets need to be made aware of this new level. This change ensures that the pairing requirements are set correctly for these connections. Signed-off-by:
-
Marcel Holtmann authored
With the introduction of security level 4, the L2CAP sockets need to be made aware of this new level. This change ensures that the pairing requirements are set correctly for these connections. Signed-off-by:
-
Marcel Holtmann authored
The security level 4 is a new strong security requirement that is based around 128-bit equivalent strength for link and encryption keys required using FIPS approved algorithms. Which means that E0, SAFER+ and P-192 are not allowed. Only connections created with P-256 resulting from using Secure Connections support are allowed. This security level needs to be enforced when Secure Connection Only mode is enabled for a controller or a service requires FIPS compliant strong security. Currently it is not possible to enable either of these two cases. This patch just puts in the foundation for being able to handle security level 4 in the future. It should be noted that devices or services with security level 4 requirement can only communicate using Bluetooth 4.1 controllers with support for Secure Connections. There is no backward compatibilty if used with older hardware. Signed-off-by:
-
Marcel Holtmann authored
It is important to know if Secure Connections support has been enabled for a given remote device. The information is provided in the remote host features page. So track this information and provide a simple helper function to extract the status. Signed-off-by:
-
Johan Hedberg authored
The NOT_PAIRED status is only really suitable for operations where being paired is a pre-requisite. Using it e.g. for the mgmt_pair_device command seems unintuitive. In the case that either the local or the remote user responds with a negative PIN Code response the "PIN or Key Missing" HCI status will be generated. This patch changes the mapping of this status from the NOT_PAIRED mgmt status to the more intuitive AUTH_FAILED mgmt status. Signed-off-by:
-
Wei Yongjun authored
Use ATTRIBUTE_GROUPS macro to reduce the number of lines of code. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Marcel Holtmann authored
The current management interface only allows to provide the remote OOB input of P-192 data. This extends the command to also accept P-256 data as well. To make this backwards compatible, the userspace can decide to only provide P-192 data or the combined P-192 and P-256 data. It is also allowed to leave the P-192 data empty if userspace only has the remote P-256 data. Signed-off-by:
-
Marcel Holtmann authored
Add function to allow adding P-192 and P-256 data to the internal storage. This also fixes a few coding style issues from the previous helper functions for the out-of-band credentials storage. Signed-off-by:
-
Marcel Holtmann authored
When Secure Connections has been enabled it is possible to provide P-192 and/or P-256 data during the pairing process. The internal out-of-band credentials storage has been extended to also hold P-256 data. Initially the P-256 data will be empty and with Secure Connections enabled no P-256 data will be provided. This is according to the specification since it might be possible that the remote side did not provide either of the out-of-band credentials. Signed-off-by:
-
Marcel Holtmann authored
The Bluetooth 4.1 specification with Secure Connections support has just been released and controllers with this feature are still in an early stage. A handful of controllers have already support for it, but they do not always identify this feature correctly. This debugfs entry allows to tell the kernel that the controller can be treated as it would fully support Secure Connections. Using debugfs to force Secure Connections support of course does not make this feature magically appear in all controllers. This is a debug functionality for early adopters. Once the majority of controllers matures this quirk will be removed. Signed-off-by:
-
Marcel Holtmann authored
For Secure Connections support and the usage of out-of-band pairing, it is needed to read the P-256 hash and randomizer or P-192 hash and randomizer. This change will read P-192 data when Secure Connections is disabled and P-192 and P-256 data when it is enabled. The difference is between using HCI Read Local OOB Data and using the new HCI Read Local OOB Extended Data command. The first one has been introduced with Bluetooth 2.1 and returns only the P-192 data. < HCI Command: Read Local OOB Data (0x03|0x0057) plen 0 > HCI Event: Command Complete (0x0e) plen 36 Read Local OOB Data (0x03|0x0057) ncmd 1 Status: Success (0x00) Hash C from P-192: 975a59baa1c4eee391477cb410b23e6d Randomizer R with P-192: 9ee63b7dec411d3b467c5ae446df7f7d The second command has been introduced with Bluetooth 4.1 and will return P-192 and P-256 data. < HCI Command: Read Local OOB Extended Data (0x03|0x007d) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local OOB Extended Data (0x03|0x007d) ncmd 1 Status: Success (0x00) Hash C from P-192: 6489731804b156fa6355efb8124a1389 Randomizer R with P-192: 4781d5352fb215b2958222b3937b6026 Hash C from P-256: 69ef8a928b9d07fc149e630e74ecb991 Randomizer R with P-256: 4781d5352fb215b2958222b3937b6026 The change for the management interface is transparent and no change is required for existing userspace. The Secure Connections feature needs to be manually enabled. When it is disabled, then userspace only gets the P-192 returned and with Secure Connections enabled, userspace gets P-192 and P-256 in an extended structure. It is also acceptable to just ignore the P-256 data since it is not required to support them. The pairing with out-of-band credentials will still succeed. However then of course no Secure Connection will b established. Signed-off-by: -
Marcel Holtmann authored
The link keys that are loaded by userspace during controller setup should be limited to actual valid and supported types. With the support for Secure Connections, it is limited to types 0x00 - 0x08 at the moment. Reject any other link key types. Signed-off-by:
-
Marcel Holtmann authored
If support for Secure Connection has been configured, then make sure to send the appropiate HCI command to enable it when powering on the controller. Signed-off-by:
-
Marcel Holtmann authored
The support for Secure Connections need to be explicitly enabled by userspace. This is required since only userspace that can handle the new link key types should enable support for Secure Connections. This command handling is similar to how Secure Simple Pairing enabling is done. It also tracks the case when Secure Connections support is enabled via raw HCI commands. This makes sure that the host features page is updated as well. Signed-off-by:
-
Marcel Holtmann authored
The MGMT_SETTING_SECURE_CONN setting is used to track the support and status for Secure Connections from the management interface. For HCI based tracking HCI_SC_ENABLED flag is used. Signed-off-by:
-
Marcel Holtmann authored
With Secure Connections capable controllers, the authenticated payload timeout can trigger. Enable the event so the controller informs the host when this happens. Signed-off-by:
-
Marcel Holtmann authored
Before being able to enable Secure Connections support, the core needs to know on how to handle P-256 derived link keys. The difference between authenticated and unauthenticated P-256 derived link keys is the same as its P-192 counter parts. Signed-off-by:
-
Marcel Holtmann authored
With the introduction of Secure Connections, the list of link key types got extended by P-256 versions of authenticated and unauthenticated link keys. To avoid any confusion the previous authenticated and unauthenticated link key types got ammended with a P912 postfix. And the two new keys have a P256 postfix now. Existing code using the previous definitions has been adjusted. Signed-off-by:
-
Marcel Holtmann authored
The Secure Connections feature introduces the support for P-256 strength pairings (compared to P-192 with Secure Simple Pairing). This however means that for out-of-band pairing the hash and randomizer needs to be differentiated. Two new commands are introduced to handle the possible combinations of P-192 and P-256. This add the HCI command definition for both. Signed-off-by:
-
Marcel Holtmann authored
The Secure Connections feature is optional and host stacks have to manually enable it. This add the HCI command definiton for reading and writing this setting. Signed-off-by:
-
Marcel Holtmann authored
The support for Secure Connections introduces two new controller features and one new host feature. Signed-off-by:
-
Johan Hedberg authored
The check for HIGH security level dates back to pre-mgmt times when a raw L2CAP socket with HIGH security level was used to trigger dedicated bonding. For legacy pairing checking for the security level was the only way to catch the need to authenticate in all scenarios. With mgmt however, the pair_device command does not use HIGH security but MEDIUM security. Therefore, the existing code would never trigger authentication for a non-SSP connection without an MITM requirement (e.g. if user space provided a NoInputNoOutput IO capability). In such a scenario the mgmt_pair_device command would return success without actually triggering any kind of pairing. This patch updates the authentication requirement check to also consider MEDIUM security level, and thereby ensures that mgmt_pair_device will always trigger authentication. Signed-off-by:
-
