- 02 Sep, 2014 26 commits
-
-
Hans Verkuil authored
This adds support for VBI capture (raw and sliced) and VBI output (raw and sliced) to the vivid driver. In addition a VBI generator is added that generates simple VBI data in either sliced or raw format. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
This adds the ioctl and vb2 queue support for video capture and output. Part of this is common to both, so that is placed in a vid-common source. Signed-off-by:
-
Hans Verkuil authored
The vivid-ctrls code sets up and processes the various V4L2 controls that are needed by this driver. Signed-off-by:
-
Hans Verkuil authored
This is the core driver code that creates all the driver instances and all the configured devices. Signed-off-by:
-
Hans Verkuil authored
The vivid Virtual Video Test Driver helps testing V4L2 applications and can emulate V4L2 hardware. Add the documentation for this driver. Signed-off-by:
-
Hans Verkuil authored
If this is a multiplanar buf_type and the plane we want to read has a non-zero data_offset, then that data_offset was not taken into account. Note that read() or write() for formats with more than one plane is currently not allowed, hence the use of 'planes[0]' since this is only relevant for a single-plane format. Signed-off-by:
-
Antti Palosaari authored
Fix coding style issues pointed out by checkpatch.pl. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Add some error checking and implement functionality a little bit differently. Cc: Nibble Max <nibble.max@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Fix coding style issues pointed out by checkpatch.pl. Signed-off-by:
-
Antti Palosaari authored
Maximum satellite symbol rate used is 45000000Sps which overflows when multiplied by 135. As final calculation result is fraction, we could use mult_frac macro in order to keep calculation inside 32 bit number limits and prevent overflow. Original bug and fix was provided by Nibble Max. I decided to implement it differently as it is now. Reported-by:
Nibble Max <nibble.max@gmail.com> Tested-by:
-
Antti Palosaari authored
There is no need to keep local copy of usb_device pointer as we have same pointer stored and available easily from device state. Signed-off-by:
-
Antti Palosaari authored
Reported by Dan Carpenter: The patch d10d1b9a: "[media] dvb_usb_v2: use dev_* logging macros" from Jun 26, 2012, leads to the following Smatch complaint: drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c:31 dvb_usb_v2_generic_io() error: we previously assumed 'd' could be null (see line 29) ... Remove whole check as it must not happen in any case. Driver is totally broken if it does not have valid pointer to device. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Olli Salonen authored
Set the property for delivery system also in case of SYS_ATSC. This behaviour is observed in the sniffs taken with Hauppauge HVR-955Q Windows driver. Signed-off-by:
Olli Salonen <olli.salonen@iki.fi> Reviewed-by:
-
CrazyCat authored
DVB-T2 PLP selection implemented for Si2168 demod. Tested with PCTV 292e. Signed-off-by:
Evgeny Plehov <EvgenyPlehov@ukr.net> Reviewed-by:
-
Olli Salonen authored
Read MAC address from the EEPROM. This version two corrects a flaw in the result code returning that did exist in the first version. Signed-off-by:
-
Olli Salonen authored
TechnoTrend TT-connect CT2-4650 CI (0b48:3012) is an USB DVB-T2/C tuner with the following components: USB interface: Cypress CY7C68013A-56LTXC Demodulator: Silicon Labs Si2168-A20 Tuner: Silicon Labs Si2158-A20 CI chip: CIMaX SP2HF The firmware for the tuner is the same as for TechnoTrend TT-TVStick CT2-4400. See https://www.mail-archive.com/linux-media@vger.kernel.org/msg76944.html The demodulator needs a firmware that can be extracted from the Windows drivers. File ttConnect4650_64.sys should be extracted from http://www.tt-downloads.de/bda-treiber_4.1.0.4.zip (MD5 sum below). 3464bfc37a47b4032568718bacba23fb ttConnect4650_64.sys Then the firmware can be extracted: dd if=ttConnect4650_64.sys ibs=1 skip=273376 count=6424 of=dvb-demod-si2168-a20-01.fw The SP2 CI module requires a definition of a function cxusb_tt_ct2_4650_ci_ctrl that is passed on to the SP2 driver and called back for CAM operations. [crope@iki.fi: meld USB ID define patch to this] Signed-off-by:
-
Olli Salonen authored
Driver for the CIMaX SP2 common interface chip. It is very much based on the existing cimax2 driver for cx23885, but should be more reusable. The product has been sold with name Atmel T90FJR as well and the data sheets for that chip seem to be publicly available. It seems that the USB device that I have and the cx23885 based devices will need to interact differently with the chip for the CAM operations. Thus there is one callback function that is passed on to the sp2 driver (see function sp2_ci_op_cam for that one). IRQ functionality is not included currently (not needed by USB devices and I don't have a PCIe device for development). Signed-off-by:
-
Olli Salonen authored
TS mode must be set in the existing TechnoTrend CT2-4400 driver. Signed-off-by:
-
Olli Salonen authored
TS mode must be set in the existing PCTV 292e driver. Signed-off-by:
-
Olli Salonen authored
Luis Alves submitted a TS mode patch to si2168 earlier, but the patch was rejected due to a small issue. Here is a working version. Also, setting of TS mode is moved from si2168_set_frontend to si2168_init. This patch adds the TS mode as a config option for the si2168 demod: - ts_mode added to config struct. - Possible (interesting) values are * Parallel mode = 0x06 * Serial mode = 0x03 Currently the modules using this demod only use parallel mode. Patches for these modules later in this patch series. Signed-off-by:
-
nibble.max authored
Implement set voltage operation. Separate TS clock as a own configuration parameter. Add TS clock polarity parameter. [crope@iki.fi: merge em28xx driver m88ds3103 config change patch to that one, in order to keep build unbroken] Signed-off-by:
-
Olli Salonen authored
Same thing for si2157 as Antti did earlier for tda18212: There is no need to print module name nor function name as those are done by kernel logging system when dev_xxx logging is used and driver is proper I2C driver. While here, fix a typo ("unknown") in si2157_init. Signed-off-by: -
Olli Salonen authored
Same thing for si2168 as Antti did earlier for tda18212: There is no need to print module name nor function name as those are done by kernel logging system when dev_xxx logging is used and driver is proper I2C driver. Signed-off-by:
-
Changbing Xiong authored
when usb-type tuner is pulled out, user applications did not close device's FD, and go on polling the device, we should return POLLERR directly. Signed-off-by:
Changbing Xiong <cb.xiong@samsung.com> Signed-off-by:
-
Changbing Xiong authored
Data type of return value is unsigned int, but in function of dvb_demux_poll, when the pointer of dmxdevfilter equals NULL, it will return -EINVAL, which is invalid. Signed-off-by:
-
Changbing Xiong authored
Normally, ADAP_STREAMING bit is set in dvb_usb_start_feed and cleared in dvb_usb_stop_feed. But in exceptional cases, for example, when the tv is playing programs and the tuner is pulled out, then dvb_usbv2_disconnect is called. In such case, it will first call dvb_usbv2_adapter_frontend_exit to stop dvb_frontend_thread, and then call dvb_usbv2_adapter_dvb_exit to clear ADAP_STREAMING bit. At this point, if dvb_frontend_thread is sleeping and waiting for ADAP_STREAMING to be cleared to get out of sleep. then dvb_frontend_thread can never be stoped, because clearing ADAP_STREAMING bit is performed after dvb_frontend_thread is stopped (i.e. performed in dvb_usbv2_adapter_dvb_exit). So, deadlock: [ 240.822037] INFO: task khubd:497 blocked for more than 120 seconds. [ 240.822655] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.830493] khubd D c0013b3c 0 497 2 0x00000000 [ 240.836996] [<c0013b3c>] (__schedule+0x200/0x54c) from [<c00110f4>] (schedule_timeout+0x14c/0x19c) [ 240.845940] [<c00110f4>] (schedule_timeout+0x14c/0x19c) from [<c00137f4>] (wait_for_common+0xac/0x150) [ 240.855234] [<c00137f4>] (wait_for_common+0xac/0x150) from [<c004989c>] (kthread_stop+0x58/0x90) [ 240.864004] [<c004989c>] (kthread_stop+0x58/0x90) from [<c03b2ebc>] (dvb_frontend_stop+0x3c/0x9c) [ 240.872849] [<c03b2ebc>] (dvb_frontend_stop+0x3c/0x9c) from [<c03b2f3c>] (dvb_unregister_frontend+0x20/0xd8) [ 240.882666] [<c03b2f3c>] (dvb_unregister_frontend+0x20/0xd8) from [<c03ed938>] (dvb_usbv2_exit+0x68/0xfc) [ 240.892204] [<c03ed938>] (dvb_usbv2_exit+0x68/0xfc) from [<c03eda18>] (dvb_usbv2_disconnect+0x4c/0x70) [ 240.901499] [<c03eda18>] (dvb_usbv2_disconnect+0x4c/0x70) from [<c031c050>] (usb_unbind_interface+0x58/0x188) [ 240.911395] [<c031c050>] (usb_unbind_interface+0x58/0x188) from [<c02c3e78>] (__device_release_driver+0x74/0xd0) [ 240.921544] [<c02c3e78>] (__device_release_driver+0x74/0xd0) from [<c02c3ef0>] (device_release_driver+0x1c/0x28) [ 240.931697] [<c02c3ef0>] (device_release_driver+0x1c/0x28) from [<c02c39b8>] (bus_remove_device+0xc4/0xe4) [ 240.941332] [<c02c39b8>] (bus_remove_device+0xc4/0xe4) from [<c02c1344>] (device_del+0xf4/0x178) [ 240.950106] [<c02c1344>] (device_del+0xf4/0x178) from [<c0319eb0>] (usb_disable_device+0xa0/0x1c8) [ 240.959040] [<c0319eb0>] (usb_disable_device+0xa0/0x1c8) from [<c03128b4>] (usb_disconnect+0x88/0x188) [ 240.968326] [<c03128b4>] (usb_disconnect+0x88/0x188) from [<c0313edc>] (hub_thread+0x4d0/0x1200) [ 240.977100] [<c0313edc>] (hub_thread+0x4d0/0x1200) from [<c0049690>] (kthread+0xa4/0xb0) [ 240.985174] [<c0049690>] (kthread+0xa4/0xb0) from [<c0009118>] (ret_from_fork+0x14/0x3c) [ 240.993259] INFO: task kdvb-ad-0-fe-0:3256 blocked for more than 120 seconds. [ 241.000349] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 241.008162] kdvb-ad-0-fe-0 D c0013b3c 0 3256 2 0x00000000 [ 241.014507] [<c0013b3c>] (__schedule+0x200/0x54c) from [<c03eda44>] (wait_schedule+0x8/0x10) [ 241.022924] [<c03eda44>] (wait_schedule+0x8/0x10) from [<c001120c>] (__wait_on_bit+0x74/0xb8) [ 241.031434] [<c001120c>] (__wait_on_bit+0x74/0xb8) from [<c00112b8>] (out_of_line_wait_on_bit+0x68/0x70) [ 241.040902] [<c00112b8>] (out_of_line_wait_on_bit+0x68/0x70) from [<c03e5e88>] (dvb_usb_fe_sleep+0xf4/0xfc) [ 241.050618] [<c03e5e88>] (dvb_usb_fe_sleep+0xf4/0xfc) from [<c03b4b74>] (dvb_frontend_thread+0x124/0x4e8) [ 241.060164] [<c03b4b74>] (dvb_frontend_thread+0x124/0x4e8) from [<c0049690>] (kthread+0xa4/0xb0) [ 241.068929] [<c0049690>] (kthread+0xa4/0xb0) from [<c0009118>] (ret_from_fork+0x14/0x3c) Fix it by calling dvb_usbv2_adapter_frontend_exit() latter. Test enviroment: odroidx2 + Hauppauge(WinTV-Aero-M) Signed-off-by:
-
- 26 Aug, 2014 14 commits
-
-
Mauro Carvalho Chehab authored
COMPILE_TEST fail on (some) archs without MMU. Signed-off-by: -
Mauro Carvalho Chehab authored
vb2-dma-contig depends on HAS_DMA, but the Kbuild doesn't take it into account at select. Signed-off-by: -
Mauro Carvalho Chehab authored
There are several arch-specific media drivers that don't require asm-specific includes and can be successfully compiled on x86. Add COMPILE_TEST dependency for them, in order to allow a broader test on those drivers. That helps static analysis tools like Coverity to discover eventual troubles there. Signed-off-by: -
Mauro Carvalho Chehab authored
We don't need anything special to enable COMPILE_TEST for this driver. Signed-off-by: -
Mauro Carvalho Chehab authored
That helps some static checks, so enable it. While there, it was noticed that linux/sizes.h was missing: drivers/media/platform/exynos4-is/mipi-csis.c: In function ‘s5pcsis_s_rx_buffer’: drivers/media/platform/exynos4-is/mipi-csis.c:114:31: error: ‘SZ_4K’ undeclared (first use in this function) #define S5PCSIS_PKTDATA_SIZE SZ_4K ^ Signed-off-by: -
Mauro Carvalho Chehab authored
Allowing COMPILE_TEST here is trivial, but there's one missing header to be added: drivers/media/platform/ti-vpe/vpe.c: In function ‘vpe_probe’: drivers/media/platform/ti-vpe/vpe.c:2266:56: error: ‘SZ_32K’ undeclared (first use in this function) dev->base = devm_ioremap(&pdev->dev, dev->res->start, SZ_32K); ^ Signed-off-by: -
Mauro Carvalho Chehab authored
By allowing compilation on all archs, we can use static analysis tools to test this driver. In order to do that, replace asm/sizes.h by its generic name (linux/sizes.h), with should keep doing the right thing. Signed-off-by: -
Mauro Carvalho Chehab authored
This patch readded a call to iss_put_clocks(), with was removed by changeset 1153be56, causing a compilation breakage. This reverts commit d4b32646.
-
Mauro Carvalho Chehab authored
drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c: In function 's5p_jpeg_clear_int': drivers/media/platform/s5p-jpeg/jpeg-hw-s5p.c:327:16: warning: variable 'reg' set but not used [-Wunused-but-set-variable] unsigned long reg; ^ Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/platform/soc_camera/atmel-isi.c: In function 'start_streaming': drivers/media/platform/soc_camera/atmel-isi.c:387:6: warning: variable 'sr' set but not used [-Wunused-but-set-variable] u32 sr = 0; ^ Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/platform/soc_camera/mx2_camera.c: In function 'mx27_camera_emma_prp_reset': drivers/media/platform/soc_camera/mx2_camera.c:812:6: warning: variable 'cntl' set but not used [-Wunused-but-set-variable] u32 cntl; ^ Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/platform/exynos4-is/media-dev.c: In function 'fimc_md_link_notify': drivers/media/platform/exynos4-is/media-dev.c:1102:4: warning: suggest braces around empty body in an 'else' statement [-Wempty-body] ; /* TODO: Link state change validation */ ^ Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/platform/exynos4-is/mipi-csis.c: In function 's5pcsis_parse_dt': drivers/media/platform/exynos4-is/mipi-csis.c:756:2: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (state->index < 0 || state->index >= CSIS_MAX_ENTITIES) ^ Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:826:5: warning: no previous prototype for 'vidioc_decoder_cmd' [-Wmissing-prototypes] int vidioc_decoder_cmd(struct file *file, void *priv, ^ drivers/media/platform/s5p-mfc/s5p_mfc.c: In function 's5p_mfc_runtime_resume': drivers/media/platform/s5p-mfc/s5p_mfc.c:1314:6: warning: variable 'pre_power' set but not used [-Wunused-but-set-variable] int pre_power; ^ drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v5.c:163:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v5' [-Wmissing-prototypes] struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v5(void) ^ drivers/media/platform/s5p-mfc/s5p_mfc_cmd_v6.c:156:25: warning: no previous prototype for 's5p_mfc_init_hw_cmds_v6' [-Wmissing-prototypes] struct s5p_mfc_hw_cmds *s5p_mfc_init_hw_cmds_v6(void) ^ drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c: In function 's5p_mfc_run_dec_frame': drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c:1189:15: warning: variable 'index' set but not used [-Wunused-but-set-variable] unsigned int index; ^ drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: In function 'cleanup_ref_queue': drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:27: warning: variable 'mb_c_addr' set but not used [-Wunused-but-set-variable] unsigned long mb_y_addr, mb_c_addr; ^ drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:742:16: warning: variable 'mb_y_addr' set but not used [-Wunused-but-set-variable] unsigned long mb_y_addr, mb_c_addr; ^ drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: At top level: drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1684:5: warning: no previous prototype for 'vidioc_encoder_cmd' [-Wmissing-prototypes] int vidioc_encoder_cmd(struct file *file, void *priv, ^ Signed-off-by:
-
