From: Markus Lidel <Markus.Lidel@shadowconnect.com>

* provides i2o_context_list_*() functions, which maps 64-bit pointers to
  32-bit context id's in a dynamic list.  On 32-bit systems the functions are
  replaced with a static inline.

* i2o_scsi now uses the i2o_context_list_*() functions for transaction
  context, and therefore now work on 64-bit systems too.

From: Markus Lidel <Markus.Lidel@shadowconnect.com>

* more than 3 "visible" disks (hda, hdb, hdc, hdd) lead to kernel panics.

* removes some unused code with partitions.

* I2O_LOCK was often called with the addresses of the controller, and not
  with the address of the device.  Fixed.

* the cleanup function for gendisk (del_gendisk) doesn't work if the queue
  is shared between different devices.  To workaround the queue is removed
  before.

* redundant code removed in module initialization and remove, use
  i2ob_new_device and i2ob_del_device instead.

* removed atomic_t queue_depth

* removed unnecessary and bogus code for queue handling

From: Markus Lidel <Markus.Lidel@shadowconnect.com>

Fix 64-bit problems.

From: Markus Lidel <Markus.Lidel@shadowconnect.com>

* Add a pass-thru ioctl to i2o_config, which is needed to work with the
  Adaptec management software.

From: Markus Lidel <Markus.Lidel@shadowconnect.com>

* Changes the formating of the header in i2o_config.c

From: Herbert Xu <herbert@gondor.apana.org.au>

The following patch adds basic module reference counting to vt console
drivers.  Currently modules like fbcon are not counted at all.

From: Ashok Raj <ashok.raj@intel.com>

Supports basic ability to enable hotplug functions for IA64.
Code is just evolving, and there are several loose ends to tie up.

What this code drop does
- Support logical online and offline
- Handles interrupt migration without loss of interrupts.
- Handles stress fine > 24+ hrs with make -j/ftp/rcp workloads
- Handles irq migration from a dying cpu without loss of interrupts.

What needs to be done
- Boot CPU removal support, with platform level authentication
- Putting cpu being removed in BOOT_RENDEZ mode.

From: Paul Jackson <pj@sgi.com>

With a hotplug capable kernel, there is a requirement to distinguish a
possible CPU from one actually present.  The set of possible CPU numbers
doesn't change during a single system boot, but the set of present CPUs
changes as CPUs are physically inserted into or removed from a system.  The
cpu_possible_map does not change once initialized at boot, but the
cpu_present_map changes dynamically as CPUs are inserted or removed.


Paul Jackson <pj@sgi.com> provided an expanded explanation:


Ashok's cpu hot plug patch adds a cpu_present_map, resulting in the following
cpu maps being available.  All the following maps are fixed size bitmaps of
size NR_CPUS.

#ifdef CONFIG_HOTPLUG_CPU
	cpu_possible_map - map with all NR_CPUS bits set
	cpu_present_map - map with bit 'cpu' set iff cpu is populated
	cpu_online_map - map with bit 'cpu' set iff cpu available to scheduler
#else
	cpu_possible_map - map with bit 'cpu' set iff cpu is populated
	cpu_present_map - copy of cpu_possible_map
	cpu_online_map - map with bit 'cpu' set iff cpu available to scheduler
#endif

In either case, NR_CPUS is fixed at compile time, as the static size of these
bitmaps.  The cpu_possible_map is fixed at boot time, as the set of CPU id's
that it is possible might ever be plugged in at anytime during the life of
that system boot.  The cpu_present_map is dynamic(*), representing which CPUs
are currently plugged in.  And cpu_online_map is the dynamic subset of
cpu_present_map, indicating those CPUs available for scheduling.

If HOTPLUG is enabled, then cpu_possible_map is forced to have all NR_CPUS
bits set, otherwise it is just the set of CPUs that ACPI reports present at
boot.

If HOTPLUG is enabled, then cpu_present_map varies dynamically, depending on
what ACPI reports as currently plugged in, otherwise cpu_present_map is just a
copy of cpu_possible_map.

(*) Well, cpu_present_map is dynamic in the hotplug case.  If not hotplug,
    it's the same as cpu_possible_map, hence fixed at boot.

From: Ashok Raj <ashok.raj@intel.com>

Changes proc entries for cpu hotplug to be created via the cpu hotplug
notifier callbacks.  Also fixed a bug in the removal code that did not remove
proc entries as expected.

From: Ashok Raj <ashok.raj@intel.com>

irq affinity setting via /proc was forcing iosapic rte programming by force.
The correct way to do this is to perform this when a interrupt is pending.

From: Ashok Raj <ashok.raj@intel.com>

Creation of sysfs via topology_init() creates sysfs entries.  The creation of
the online control file is created separately when the cpu_up is invoked in
arch independent code.

From: Ashok Raj <ashok.raj@intel.com>

Contains changes from __init to __devinit to support cpu hotplug Changes only
arch/ia64 portions of the kernel tree.

From: Ashok Raj <ashok.raj@intel.com>

This patch changes __init to __devinit to init_idle so that when a new cpu
arrives, it can call these functions at a later time.

From: Andrea Arcangeli <andrea@suse.de>

I don't think we need an install_swap_bdev/remove_swap_bdev anymore, we should
use the swap_info->bdev, not the swap_bdevs.  the swap_info already has a
->bdev field, the only point of remove_swap_bdev/install_swap_bdev was to
unplug all devices as efficiently as possible, we don't need that anymore with
the page parameter.

Plus the semaphore should be a rwsem to allow parallel unplug from multiple
pages.

After that I don't need to take the semaphore anymore during swapon, no
swapcache with swp_type() pointing to such bdev, will be allowed until swapon
is complete (SWP_ACTIVE is set a lot later after setting p->bdev).

In swapoff I only need a dummy serialization with the readers, after
try_to_unuse is complete:

 	err = try_to_unuse(type);
 	current->flags &= ~PF_SWAPOFF;

 	/* wait for any unplug function to finish */
 	down_write(&swap_unplug_sem);
 	up_write(&swap_unplug_sem);


that's all, no other locking and no install_swap_bdev/remove_swap_bdev.

(and the swap_bdevs[] compression code was busted)

We don't trust bh->b_page to point to the right thing across all filesystems,
so revert this bit.

From: Andrea Arcangeli <andrea@suse.de>

From: Jens Axboe

Add blk_run_page() API.  This is so that we can pass the target page all the
way down to (for example) the swap unplug function.  So swap can work out
which blockdevs back this particular page.

Revert the pre-2.6.6 per-address-space unplugging changes.  This removes a
swapper_space exceptionality, syncs things with Andrea and provides for
simplification of the swap unplug function.

Sync this up with Andrea's patches.

From: William Lee Irwin III <wli@holomorphy.com>

This patch implements wake-one semantics for buffer_head wakeups in a single
step.  The buffer_head being waited on is passed to the waiter's wakeup
function by the waker, and the wakeup function compares that to the a pointer
stored in its on-stack structure and checking the readiness of the bit there
also.  Wake-one semantics are achieved by using WQ_FLAG_EXCLUSIVE in the
codepaths waiting to acquire the bit for mutual exclusion.

From: William Lee Irwin III <wli@holomorphy.com>

This patch implements wake-one semantics for page wakeups in a single step.
Discrimination between distinct pages is achieved by passing the page to the
wakeup function, which compares it to a pointer in its own on-stack structure
containing the waitqueue element and the page.  Bit discrimination is achieved
by storing the bit number in that same structure and testing the bit in the
wakeup function.  Wake-one semantics are achieved by using WQ_FLAG_EXCLUSIVE
in the codepaths waiting to acquire the bit for mutual exclusion.

From: William Lee Irwin III <wli@holomorphy.com>

This patch provides an additional argument to __wake_up_common() so that the
information wakefunc.patch made waiters ready to receive may be passed to them
by wakers.  This is provided as a separate patch so that the overhead of the
additional argument to __wake_up_common() can be measured in isolation.  No
change in performance was observable here.

From: William Lee Irwin III <wli@holomorphy.com>

This patch series is solving the "thundering herd" problem that occurs in the
mainline implementation of hashed waitqueues.  There are two sources of
spurious wakeups in such arrangements:

(a) Hash collisions that place waiters on different objects on the same
    waitqueue, which wakes threads falsely when any of the objects hashed to
    the same queue receives a wakeup.  i.e.  loss of information about which
    object a wakeup event is related to.

(b) Loss of information about which object a given waiter is waiting on.
    This precludes wake-one semantics for mutual exclusion scenarios.  For
    instance, a lock bit may be slept on.  If there are any waiters on the
    object, a lock bit release event must wake at least one of them so as to
    prevent deadlock.  But without information as to which waiter is waiting
    on which object, we must resort to waking all waiters who could possibly
    be waiting on it.  Now, as the lock bit provides mutual exclusion, only
    one of the waiters woken can proceed, and the remainder will go back to
    sleep and wait for another event, creating unnecessary system load.  Once
    wake-one semantics are established, only one of the waiters waiting to
    acquire a lock bit need to be woken, which measurably reduces system load
    and improves efficiency (i.e.  it's the subject of the benchmarking I've
    been sending to you).

Even beyond the measurable efficiency gains, there are reasons of robustness
and responsiveness to motivate addressing the issue of thundering herds.  In a
real-life scenario I've been personally involved in resolving, the thundering
herd issue caused powerful modern SMP machines with fast IO systems to be
unresponsive to user input for a minute at a time or more.  Analogues of these
patches for the distro kernels involved fully resolved the issue to the
customer's satisfaction and obviated workarounds to limit the pagecache's
size.

The latest spin of these patches basically shoves more pieces of the logic
into the wakeup functions, with some efficiency gains from sharing the hot
codepath with the rest of the kernel, and a slightly larger diff than the
patches with the newly-introduced entrypoint.  Writing these was motivated by
the push to insulate sched.c from more of the details of wakeup semantics by
putting more of the logic into the wakeup functions.  In order to accomplish
this while still solving (b), the wakeup functions grew a new argument for
communication about what object a wakeup event is related to to be passed by
the waker.

=========

This patch provides an additional argument to wakeup functions so that
information may be passed from the waker to the waiter.  This is provided as a
separate patch so that the overhead of the additional argument can be measured
in isolation.  No change in performance was observable here.

gcc-3.4.0 sez:

init/do_mounts_rd.c:309: warning: conflicting types for built-in function 'malloc'

From: Hugh Dickins <hugh@veritas.com>

Stas Sergeev <stsp@aknet.ru> wrote:

   mprotect() fails to merge VMAs because one VMA can end up with
   VM_ACCOUNT flag set, and another without that flag.  That makes several
   apps of mine to malfuncate.


Great find!  Someone has got their test the wrong way round.  Since that
VM_MAYACCT macro is being used in one place only, and just hiding what it's
actually about, fold it into its callsite.

David Mosberger asked that this be backed out:

"I do not believe that flushing the TLB before migration is be the right thing
to do on ia64 machines which support global TLB purges (i.e., all but SGI's
machines)."

It was of huge benefit for the SGI machines, so work is ongoing.

Switch all users of MSEC[S]_TO_JIFFIES and JIFFIES_TO_MSEC[S] over to use
jiffies_to_msecs() and msecs_to_jiffies().  Withdraw MSECS_TO_JIFFIES() and
JIFFIES_TO_MSECS() from the kernel API.

Remove various private implementations of msecs_to_jiffies() and
jiffies_to_msecs().

There are various uppercase versions which should be consolidated.

From: Ingo Molnar <mingo@elte.hu>

We have various different implementations of MSEC[S]_TO_JIFFIES and
JIFFIES_TO_MSEC[S].  We recently had a compile-time clash in USB.

Fix all that up.

- The SCTP version was very inefficient.  Hopefully this version is accurate
  enough.

- Optimise for the HZ=100 and HZ=1000 cases

- This version does round-up, so sleep(9 milliseconds) works OK on 100HZ.

- We still have lots of jiffies_to_msec and msec_to_jiffies implementations.

From: William Lee Irwin III <wli@holomorphy.com>

  Optimize the cases where HZ is a divisor of 1000 or vice-versa in
  JIFFIES_TO_MSECS() and MSECS_TO_JIFFIES() by allowing the nonvanishing(!)
  integral ratios to appear as a parenthesized expressions eligible for
  constant folding optimizations.

From: me

  Use typesafe inlines for the jiffies-to-millisecond conversion functions.

  This means that milliseconds officially takes the type `unsigned int'.
  All current callers seem to be OK with that.

  Drivers need to be fixed up to use this instead of their private versions.

From: Nick Piggin <nickpiggin@yahoo.com.au>

this_rq_lock does a local_irq_disable, and sched_yield() needs to undo that.

This has been there for nearly two years.  See bugzilla #1403

vmscan.c does, in two places:

	spin_lock(zone->lru_lock)
	page = lru_to_page(&zone->inactive_list);
	if (page_count(page) == 0) {
		/* erk, it's being freed by __page_cache_release() or
		 * release_pages()
		 */
		put_it_back_on_the_lru();

	} else {

	--> window 1 <--

		page_cache_get(page);
		put_in_on_private_list();
	}
	spin_unlock(zone->lru_lock)

	use_the_private_list();

	page_cache_release(page);



whereas __page_cache_release() and release_pages() do:

	if (put_page_testzero(page)) {

	--> window 2 <--

		spin_lock(lru->lock);
		if (page_count(page) == 0) {
			remove_it_from_the_lru();
			really_free_the_page()
		}
		spin_unlock(zone->lru_lock)
	}


The race occurs if the vmscan.c path sees page_count()==1 and then the
page_cache_release() path happens in that few-instruction "window 1" before
vmscan's page_cache_get().

The page_cache_release() path does put_page_testzero(), which returns true.
Then this CPU takes an interrupt...

The vmscan.c path then does page_cache_get(), taking the refcount to one.
Then it uses the page and does page_cache_release(), taking the refcount to
zero and the page is really freed.

Now, the CPU running page_cache_release() returns from the interrupt, takes
the LRU lock, sees the page still has a refcount of zero and frees it again.
Boom.


The patch fixes this by closing "window 1".  We provide a
"get_page_testone()" which grabs a ref on the page and returns true if the
refcount was previously zero.  If that happens the vmscan.c code simply drops
the page's refcount again and leaves the page on the LRU.

All this happens under the zone->lru_lock, which is also taken by
__page_cache_release() and release_pages(), so the vmscan code knows that the
page has not been returned to the page allocator yet.


In terms of implementation, the page counts are now offset by one: a free page
has page->_count of -1.  This is so that we can use atomic_add_negative() and
atomic_inc_and_test() to provide put_page_testzero() and get_page_testone().

The macros hide all of this so the public interpretation of page_count() and
set_page_count() remains unaltered.

The compiler can usually constant-fold the offsetting of page->count.  This
patch increases an x86 SMP kernel's text by 32 bytes.

The patch renames page->count to page->_count to break callers who aren't
using the macros.

This patch requires that the architecture implement atomic_add_negative().  It
is currently present on

	arm
	arm26
	i386
	ia64
	mips
	ppc
	s390
	v850
	x86_64

ppc implements this as

#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)

and atomic_add_return() is implemented on

	alpha
	cris
	h8300
	ia64
	m68knommu
	mips
	parisc
	ppc
	ppc
	ppc64
	s390
	sh
	sparc
	v850

so we're looking pretty good.

From: David Mosberger <davidm@napali.hpl.hp.com>

From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>

It seems atomic_inc_and_test() is missing on alpha.

It's easy to do when the arch provides atomic_inc_return().

Lots of architectures have atomic_add_return() and no atomic_add_negative().

We can implement the latter in terms of the former.

I'm about to change the meaning (and name) of page->count.  Go through and fix
up all those places which are open-coding references to it.

into redhat.com:/spare/repo/net-drivers-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux