Pull USB fixes from Greg KH:
 "Here are a number of fixes for the USB core and drivers for 3.4-rc2

  Lots of tiny xhci fixes here, a few usb-serial driver fixes and new
  device ids, and a smattering of other minor fixes in different USB
  drivers.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits)
  USB: update usbtmc api documentation
  xHCI: Correct the #define XHCI_LEGACY_DISABLE_SMI
  xHCI: use gfp flags from caller instead of GFP_ATOMIC
  xHCI: add XHCI_RESET_ON_RESUME quirk for VIA xHCI host
  USB: fix bug of device descriptor got from superspeed device
  xhci: Fix register save/restore order.
  xhci: Restore event ring dequeue pointer on resume.
  xhci: Don't write zeroed pointers to xHC registers.
  xhci: Warn when hosts don't halt.
  xhci: don't re-enable IE constantly
  usb: xhci: fix section mismatch in linux-next
  xHCI: correct to print the true HSEE of USBCMD
  USB: serial: fix race between probe and open
  UHCI: hub_status_data should indicate if ports are resuming
  EHCI: keep track of ports being resumed and indicate in hub_status_data
  USB: fix race between root-hub suspend and remote wakeup
  USB: sierra: add support for Sierra Wireless MC7710
  USB: ftdi_sio: fix race condition in TIOCMIWAIT, and abort of TIOCMIWAIT when the device is removed
  USB: ftdi_sio: fix status line change handling for TIOCMIWAIT and TIOCGICOUNT
  USB: don't ignore suspend errors for root hubs
  ...

Pull tty and serial fixes from Greg KH:
 "Here are some tty and serial fixes for 3.4-rc2.

  Most important here is the pl011 fix, which has been reported by about
  100 different people, which means more people use it than I expected
  :)

  There are also some 8250 driver reverts due to some problems reported
  by them.  And other minor fixes as well.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pch_uart: Add Kontron COMe-mTT10 uart clock quirk
  pch_uart: Fix MSI setting issue
  serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port
  Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller"
  Revert "serial/8250_pci: init-quirk msi support for kt serial controller"
  tty/serial/omap: console can only be built-in
  serial: samsung: fix omission initialize ulcon in reset port fn()
  printk(): add KERN_CONT where needed in hpet and vt code
  tty/serial: atmel_serial: fix RS485 half-duplex problem
  tty: serial: altera_uart: Check for NULL platform_data in probe.
  isdn/gigaset: use gig_dbg() for debugging output
  omap-serial: Fix the error handling in the omap_serial probe
  serial: PL011: move interrupt clearing

Pull staging tree fixes from Greg KH:
 "Here are a number of bugfixes for the drivers/staging/ portion of the
  kernel that have been reported recently.

  Nothing major here, with maybe the exception of the ramster code can
  now be built so it is enabled in the build again, and lots of memory
  leaks that people like to have fixed on their systems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: fix mem leaks in __persistent_ram_init()
  staging: vt6656: Don't leak memory in drivers/staging/vt6656/ioctl.c::private_ioctl()
  staging: iio: hmc5843: Fix crash in probe function.
  staging/xgifb: fix display on XGI Volari Z11m cards
  Staging: android: timed_gpio: Fix resource leak in timed_gpio_probe error paths
  android: make persistent_ram based drivers depend on HAVE_MEMBLOCK
  staging: iio: ak8975: Remove i2c client data corruption
  staging: drm/omap: move where DMM driver is registered
  staging: zsmalloc: fix memory leak
  Staging: rts_pstor: off by one in for loop
  staging: ozwpan: Added new maintainer for ozwpan
  staging:rts_pstor:Avoid "Bad target number" message when probing driver
  staging:rts_pstor:Fix possible panic by NULL pointer dereference
  Staging: vt6655-6: check keysize before memcpy()
  staging/media/as102: Don't call release_firmware() on uninitialized variable
  staging:iio:core add missing increment of loop index in iio_map_array_unregister()
  staging: ramster: unbreak my heart
  staging/vme: Fix module parameters
  staging: sep: Fix sign of error

Pull driver core and kobject fixes from Greg KH:
 "Here are some minor fixes for the driver core and kobjects that people
  have reported recently.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kobject: provide more diagnostic info for kobject_add_internal() failures
  sysfs: handle 'parent deleted before child added'
  sysfs: Prevent crash on unset sysfs group attributes
  sysfs: Update the name hash for an entry after changing the namespace
  drivers/base: fix compiler warning in SoC export driver - idr should be ida
  drivers/base: Remove unneeded spin_lock_init call for soc_lock

Pull a fix for the recent irqdomain bug fixes from Grant Likely:
 "I flubbed one patch in the last pull request which broke a format
  string on 64 bit platforms.  Here's the fix."

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  irq_domain: fix type mismatch in debugfs output format

sizeof(void*) returns an unsigned long, but it was being used as a width parameter to a "%-*s" format string which requires an int.  On 64 bit platforms this causes a type mismatch:

    linux/kernel/irq/irqdomain.c:575: warning: field width should have type
    'int', but argument 6 has type 'long unsigned int'

This change casts the size to an int so printf gets the right data type.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: David Daney <david.daney@cavium.com>

Pull trivial perf build failure fix from Thomas Gleixner.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix getrusage() related build failure on glibc trunk

Pull timer fixes from Thomas Gleixner:
 "The itimer removal one is not strictly a fix, but I really wanted to
  avoid a rebase of the urgent ones."

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "clocksource: Load the ACPI PM clocksource asynchronously"
  clockevents: tTack broadcast device mode change in tick_broadcast_switch_to_oneshot()
  itimer: Use printk_once instead of WARN_ONCE
  nohz: Fix stale jiffies update in tick_nohz_restart()
  tick: Document TICK_ONESHOT config option
  proc: stats: Use arch_idle_time for idle and iowait times if available
  itimer: Schedule silent NULL pointer fixup in setitimer() for removal

Pull x86 fixes from Thomas Gleixner.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Use correct byte-sized register constraint in __add()
  x86: Use correct byte-sized register constraint in __xchg_op()
  x86: vsyscall: Use NULL instead 0 for a pointer argument

If, in __persistent_ram_init(), the call to
persistent_ram_buffer_init() fails or the call to
persistent_ram_init_ecc() fails then we fail to free the memory we
allocated to 'prz' with kzalloc() - thus leaking it.

To prevent the leaks I consolidated all error exits from the function
at a 'err:' label at the end and made all error cases jump to that
label where we can then make sure we always free 'prz'. This is safe
since all the situations where the code bails out happen before 'prz'
has been stored anywhere and although we'll do a redundant kfree(NULL)
call in the case of kzalloc() itself failing that's OK since kfree()
deals gracefully with NULL pointers and I felt it was more important
to keep all error exits at a single location than to avoid that one
harmless/redundant kfree() on a error path.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Colin Cross <ccross@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If copy_to_user() fails in the WLAN_CMD_GET_NODE_LIST case of the
switch in drivers/staging/vt6656/ioctl.c::private_ioctl() we'll leak
the memory allocated to 'pNodeList'. Fix that by kfree'ing the memory
in the failure case.
Also remove a pointless cast (to type 'PSNodeList') of a kmalloc()
return value - kmalloc() returns a void pointer that is implicitly
converted, so there is no need for an explicit cast.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix crash after issuing:
	echo hmc5843 0x1e > /sys/class/i2c-dev/i2c-2/device/new_device

	[   37.180999] device: '2-001e': device_add
	[   37.188293] bus: 'i2c': add device 2-001e
	[   37.194549] PM: Adding info for i2c:2-001e
	[   37.200958] bus: 'i2c': driver_probe_device: matched device 2-001e with driver hmc5843
	[   37.210815] bus: 'i2c': really_probe: probing driver hmc5843 with device 2-001e
	[   37.224884] HMC5843 initialized
	[   37.228759] ------------[ cut here ]------------
	[   37.233612] kernel BUG at mm/slab.c:505!
	[   37.237701] Internal error: Oops - BUG: 0 [#1] PREEMPT
	[   37.243103] Modules linked in:
	[   37.246337] CPU: 0    Not tainted  (3.3.1-gta04+ #28)
	[   37.251647] PC is at kfree+0x84/0x144
	[   37.255493] LR is at kfree+0x20/0x144
	[   37.259338] pc : [<c00b408c>]    lr : [<c00b4028>]    psr: 40000093
	[   37.259368] sp : de249cd8  ip : 0000000c  fp : 00000090
	[   37.271362] r10: 0000000a  r9 : de229eac  r8 : c0236274
	[   37.276855] r7 : c09d6490  r6 : a0000013  r5 : de229c00  r4 : de229c10
	[   37.283691] r3 : c0f00218  r2 : 00000400  r1 : c0eea000  r0 : c00b4028
	[   37.290527] Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
	[   37.298095] Control: 10c5387d  Table: 9e1d0019  DAC: 00000015
	[   37.304107] Process sh (pid: 91, stack limit = 0xde2482f0)
	[   37.309844] Stack: (0xde249cd8 to 0xde24a000)
	[   37.314422] 9cc0:                                                       de229c10 de229c00
	[   37.322998] 9ce0: de229c10 ffffffea 00000005 c0236274 de140a80 c00b4798 dec00080 de140a80
	[   37.331573] 9d00: c032f37c dec00080 000080d0 00000001 de229c00 de229c10 c048d578 00000005
	[   37.340148] 9d20: de229eac 0000000a 00000090 c032fa40 00000001 00000000 00000001 de229c10
	[   37.348724] 9d40: de229eac 00000029 c075b558 00000001 00000003 00000004 de229c10 c048d594
	[   37.357299] 9d60: 00000000 60000013 00000018 205b0007 37332020 3432322e 5d343838 c0060020
	[   37.365905] 9d80: de251600 00000001 00000000 de251600 00000001 c0065a84 de229c00 de229c48
	[   37.374481] 9da0: 00000006 0048d62c de229c38 de229c00 de229c00 de1f6c00 de1f6c20 00000001
	[   37.383056] 9dc0: 00000000 c048d62c 00000000 de229c00 de229c00 de1f6c00 de1f6c20 00000001
	[   37.391632] 9de0: 00000000 c048d62c 00000000 c0330164 00000000 de1f6c20 c048d62c de1f6c00
	[   37.400207] 9e00: c0330078 de1f6c04 c078d714 de189b58 00000000 c02ccfd8 de1f6c20 c0795f40
	[   37.408782] 9e20: c0238330 00000000 00000000 c02381a8 de1b9fc0 de1f6c20 de1f6c20 de249e48
	[   37.417358] 9e40: c0238330 c0236bb0 decdbed8 de7d0f14 de1f6c20 de1f6c20 de1f6c54 de1f6c20
	[   37.425933] 9e60: 00000000 c0238030 de1f6c20 c078d7bc de1f6c20 c02377ec de1f6c20 de1f6c28
	[   37.434509] 9e80: dee64cb0 c0236138 c047c554 de189b58 00000000 c004b45c de1f6c20 de1f6cd8
	[   37.443084] 9ea0: c0edfa6c de1f6c00 dee64c68 de1f6c04 de1f6c20 dee64cb8 c047c554 de189b58
	[   37.451690] 9ec0: 00000000 c02cd634 dee64c68 de249ef4 de23b008 dee64cb0 0000000d de23b000
	[   37.460266] 9ee0: de23b007 c02cd78c 00000002 00000000 00000000 35636d68 00333438 00000000
	[   37.468841] 9f00: 00000000 00000000 001e0000 00000000 00000000 00000000 00000000 0a10cec0
	[   37.477416] 9f20: 00000002 de249f80 0000000d dee62990 de189b40 c0234d88 0000000d c010c354
	[   37.485992] 9f40: 0000000d de210f28 000acc88 de249f80 0000000d de248000 00000000 c00b7bf8
	[   37.494567] 9f60: de210f28 000acc88 de210f28 000acc88 00000000 00000000 0000000d c00b7ed8
	[   37.503143] 9f80: 00000000 00000000 0000000d 00000000 0007fa28 0000000d 000acc88 00000004
	[   37.511718] 9fa0: c000e544 c000e380 0007fa28 0000000d 00000001 000acc88 0000000d 00000000
	[   37.520294] 9fc0: 0007fa28 0000000d 000acc88 00000004 00000001 00000020 00000002 00000000
	[   37.528869] 9fe0: 00000000 beab8624 0000ea05 b6eaebac 600d0010 00000001 00000000 00000000
	[   37.537475] [<c00b408c>] (kfree+0x84/0x144) from [<c0236274>] (device_add+0x530/0x57c)
	[   37.545806] [<c0236274>] (device_add+0x530/0x57c) from [<c032fa40>] (iio_device_register+0x8c8/0x990)
	[   37.555480] [<c032fa40>] (iio_device_register+0x8c8/0x990) from [<c0330164>] (hmc5843_probe+0xec/0x114)
	[   37.565338] [<c0330164>] (hmc5843_probe+0xec/0x114) from [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8)
	[   37.574737] [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) from [<c02381a8>] (driver_probe_device+0x118/0x218)
	[   37.584777] [<c02381a8>] (driver_probe_device+0x118/0x218) from [<c0236bb0>] (bus_for_each_drv+0x4c/0x84)
	[   37.594818] [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) from [<c0238030>] (device_attach+0x78/0xa4)
	[   37.604125] [<c0238030>] (device_attach+0x78/0xa4) from [<c02377ec>] (bus_probe_device+0x28/0x9c)
	[   37.613433] [<c02377ec>] (bus_probe_device+0x28/0x9c) from [<c0236138>] (device_add+0x3f4/0x57c)
	[   37.622650] [<c0236138>] (device_add+0x3f4/0x57c) from [<c02cd634>] (i2c_new_device+0xf8/0x19c)
	[   37.631805] [<c02cd634>] (i2c_new_device+0xf8/0x19c) from [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130)
	[   37.641754] [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) from [<c0234d88>] (dev_attr_store+0x18/0x24)
	[   37.651611] [<c0234d88>] (dev_attr_store+0x18/0x24) from [<c010c354>] (sysfs_write_file+0x10c/0x140)
	[   37.661193] [<c010c354>] (sysfs_write_file+0x10c/0x140) from [<c00b7bf8>] (vfs_write+0xb0/0x178)
	[   37.670410] [<c00b7bf8>] (vfs_write+0xb0/0x178) from [<c00b7ed8>] (sys_write+0x3c/0x68)
	[   37.678833] [<c00b7ed8>] (sys_write+0x3c/0x68) from [<c000e380>] (ret_fast_syscall+0x0/0x3c)
	[   37.687683] Code: 1593301c e5932000 e3120080 1a000000 (e7f001f2)
	[   37.700775] ---[ end trace aaf805debdb69390 ]---

Client data was assigned to iio_dev structure in probe but in
hmc5843_init_client function casted to private driver data structure which
is wrong. Possibly calling mutex_init(&data->lock); corrupt data
which the lead to above crash.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge fixes from Andrew Morton.

* emailed from Andrew Morton <akpm@linux-foundation.org>: (14 patches)
  panic: fix stack dump print on direct call to panic()
  drivers/rtc/rtc-pl031.c: enable clock on all ST variants
  Revert "mm: vmscan: fix misused nr_reclaimed in shrink_mem_cgroup_zone()"
  hugetlb: fix race condition in hugetlb_fault()
  drivers/rtc/rtc-twl.c: use static register while reading time
  drivers/rtc/rtc-s3c.c: add placeholder for driver private data
  drivers/rtc/rtc-s3c.c: fix compilation error
  MAINTAINERS: add PCDP console maintainer
  memcg: do not open code accesses to res_counter members
  drivers/rtc/rtc-efi.c: fix section mismatch warning
  drivers/rtc/rtc-r9701.c: reset registers if invalid values are detected
  drivers/char/random.c: fix boot id uniqueness race
  memcg: fix broken boolen expression
  memcg: fix up documentation on global LRU

Pull networking fixes from David Miller:

 1) Fix bluetooth userland regression reported by Keith Packard, from
    Gustavo Padovan.

 2) Revert ath9k PS idle change, from Sujith Manoharan.

 3) Correct default TCP memory limits (again), from Eric Dumazet.

 4) Fix tcp_rcv_rtt_update() accidental use of unscaled RTT, from Neal
    Cardwell.

 5) We made a facility for layers like wireless to say how much tailroom
    they need in the SKB for link layer stuff such as wireless
    encryption etc., but TCP works hard to fill every SKB out to the end
    defeating this specification.

    This leads to every TCP packet getting reallocated by the wireless
    code in order to have the right amount of tailroom available.

    Fix TCP to only fill SKBs out to the real amount of data area it
    asked for during the allocation, this way it won't eat into the
    slack added for the device's tailroom needs.

    Reported by Marc Merlin and fixed by Eric Dumazet.

 6) Leaks, endian bugs, and new device IDs in bluetooth from Santosh
    Nayak, João Paulo Rechi Vita, Cho, Yu-Chen, Andrei Emeltchenko,
    AceLan Kao, and Andrei Emeltchenko.

 7) OOPS on tty_close fix in bluetooth's hci_ldisc from Johan Hovold.

 8) netfilter erroneously scales TCP window twice, fix from Changli Gao.

 9) Memleak fix in wext-core from Julia Lawall.

10) Consistently handle invalid TCP packets in ipv4 vs.  ipv6 conntrack,
    from Jozsef Kadlecsik.

11) Validate IP header length properly in netfilter conntrack's
    ipv4_get_l4proto().

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits)
  NFC: Fix the LLCP Tx fragmentation loop
  rtlwifi: Add missing DMA buffer unmapping for PCI drivers
  rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routine
  tcp: avoid order-1 allocations on wifi and tx path
  net: allow pskb_expand_head() to get maximum tailroom
  bridge: Do not send queries on multicast group leaves
  MAINTAINERS: Mark NATSEMI driver as orphan'd.
  tcp: fix tcp_rcv_rtt_update() use of an unscaled RTT sample
  tcp: restore correct limit
  Revert "ath9k: fix going to full-sleep on PS idle"
  rt2x00: Fix rfkill_polling register function.
  bcma: fix build error on MIPS; implicit pcibios_enable_device
  netfilter: nf_conntrack: fix incorrect logic in nf_conntrack_init_net
  netfilter: nf_ct_ipv4: packets with wrong ihl are invalid
  netfilter: nf_ct_ipv4: handle invalid IPv4 and IPv6 packets consistently
  net/wireless/wext-core.c: add missing kfree
  rtlwifi: Fix oops on rate-control failure
  mac80211: Convert WARN_ON to WARN_ON_ONCE
  rtlwifi: rtl8192de: Fix firmware initialization
  nl80211: ensure interface is up in various APIs
  ...

Pull drm fixes from Dave Airlie:
 "Mostly exynos and intel.

  Intel has 3 regression fixers (more info in intel merge commit), along
  with some other make hw work fixes, exynos has some cleanups and an
  ioctl fix.

  A couple of radeon fixes, couple of build fixes, and a savage
  userspace interface possible overflow fix."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (23 commits)
  drm/exynos: fixed exynos broken ioctl
  drm/i915: clear fencing tracking state when retiring requests
  drm/exynos: fix to pointer manager member of struct exynos_drm_subdrv
  drm/exynos: fix struct for operation callback functions to driver name
  drm/exynos: use define instead of default_win member in struct mixer_context
  drm/exynos: rename s/HDMI_OVERLAY_NUMBER/MIXER_WIN_NR
  drm/exynos: remove unused codes in hdmi and mixer
  drm/exynos: remove unnecessary type conversion of hdmi and mixer
  drm/i915: make rc6 module parameter read-only
  drm/i915: implement ColorBlt w/a
  drm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g
  Revert "drm/i915: reenable gmbus on gen3+ again"
  drm/radeon: only add the mm i2c bus if the hw_i2c module param is set
  vgaarb.h: fix build warnings
  drm/i915: properly compute dp dithering for user-created modes
  drm/radeon/kms: fix DVO setup on some r4xx chips
  drm/savage: fix integer overflows in savage_bci_cmdbuf()
  drm/radeon: replace udelay with mdelay for long timeouts
  drm/i915: Finish any pending operations on the framebuffer before disabling
  drm/i915: Removed IVB forced enable of sprite dest key.
  ...

Pull a few more fixes for md from NeilBrown:
 "Two are tagged for -stable.  They can cause an oops, but very rarely."

* tag 'md-3.4-fixes' of git://neil.brown.name/md:
  md/bitmap: prevent bitmap_daemon_work running while initialising bitmap
  md/raid1,raid10: Fix calculation of 'vcnt' when processing error recovery.
  MD: Bitmap version cleanup.

Commit 6e6f0a1f ("panic: don't print redundant backtraces on oops")
causes a regression where no stack trace will be printed at all for the
case where kernel code calls panic() directly while not processing an
oops, and of course there are 100's of instances of this type of call.

The original commit executed the check (!oops_in_progress), but this will
always be false because just before the dump_stack() there is a call to
bust_spinlocks(1), which does the following:

  void __attribute__((weak)) bust_spinlocks(int yes)
  {
	if (yes) {
		++oops_in_progress;

The proper way to resolve the problem that original commit tried to
solve is to avoid printing a stack dump from panic() when the either of
the following conditions is true:

  1) TAINT_DIE has been set (this is done by oops_end())
     This indicates and oops has already been printed.
  2) oops_in_progress > 1
     This guards against the rare case where panic() is invoked
     a second time, or in between oops_begin() and oops_end()
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: <stable@vger.kernel.org>	[3.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ST variants of the PL031 all require bit 26 in the control register
to be set before they work properly.  Discovered this when testing on
the Nomadik board where it would suprisingly just stand still.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Cc: Alessandro Rubini <rubini@unipv.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit c38446cc.

Before the commit, the code makes senses to me but not after the commit.
The "nr_reclaimed" is the number of pages reclaimed by scanning through
the memcg's lru lists.  The "nr_to_reclaim" is the target value for the
whole function.  For example, we like to early break the reclaim if
reclaimed 32 pages under direct reclaim (not DEF_PRIORITY).

After the reverted commit, the target "nr_to_reclaim" is decremented each
time by "nr_reclaimed" but we still use it to compare the "nr_reclaimed".
It just doesn't make sense to me...
Signed-off-by: Ying Han <yinghan@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The race is as follows:

Suppose a multi-threaded task forks a new process (on cpu A), thus
bumping up the ref count on all the pages.  While the fork is occurring
(and thus we have marked all the PTEs as read-only), another thread in
the original process (on cpu B) tries to write to a huge page, taking an
access violation from the write-protect and calling hugetlb_cow().  Now,
suppose the fork() fails.  It will undo the COW and decrement the ref
count on the pages, so the ref count on the huge page drops back to 1.
Meanwhile hugetlb_cow() also decrements the ref count by one on the
original page, since the original address space doesn't need it any
more, having copied a new page to replace the original page.  This
leaves the ref count at zero, and when we call unlock_page(), we panic.

	fork on CPU A				fault on CPU B
	=============				==============
	...
	down_write(&parent->mmap_sem);
	down_write_nested(&child->mmap_sem);
	...
	while duplicating vmas
		if error
			break;
	...
	up_write(&child->mmap_sem);
	up_write(&parent->mmap_sem);		...
						down_read(&parent->mmap_sem);
						...
						lock_page(page);
						handle COW
						page_mapcount(old_page) == 2
						alloc and prepare new_page
	...
	handle error
	page_remove_rmap(page);
	put_page(page);
	...
						fold new_page into pte
						page_remove_rmap(page);
						put_page(page);
						...
				oops ==>	unlock_page(page);
						up_read(&parent->mmap_sem);

The solution is to take an extra reference to the page while we are
holding the lock on it.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RTC stores time and date in several registers.  Due to the fact that
these registers can't be read instantaneously, there is a chance that
reading from counting registers gives an error of one minute, one hour,
one day, etc.

To address this issue, the RTC has hardware support to copy the RTC
counting registers to static shadowed registers.  The current
implementation does not use this feature, and in a stress test, we can
reproduce this error at a rate of around two times per 300000 readings.

Fix the implementation to ensure that the right snapshot of time is
captured.
Signed-off-by: Konstantin Shlyakhovoy <x0155534@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: linux-omap <linux-omap@vger.kernel.org>
Acked-by: Mykola Oleksiienko <x0174904@ti.com>
Acked-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@ti.com>
Acked-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Driver data field is a pointer, hence assigning that to an integer results
in compilation warnings.

Fixes following compilation warnings:

  drivers/rtc/rtc-s3c.c: In function `s3c_rtc_get_driver_data':
  drivers/rtc/rtc-s3c.c:452:3: warning: return makes integer from pointer without a cast [enabled by default]
  drivers/rtc/rtc-s3c.c: At top level:
  drivers/rtc/rtc-s3c.c:674:3: warning: initialization makes pointer from integer without a cast [enabled by default]
  drivers/rtc/rtc-s3c.c:674:3: warning: (near initialization for `s3c_rtc_dt_match[1].data') [enabled by default]
  drivers/rtc/rtc-s3c.c:677:3: warning: initialization makes pointer from integer without a cast [enabled by default]
  drivers/rtc/rtc-s3c.c:677:3: warning: (near initialization for `s3c_rtc_dt_match[2].data') [enabled by default]
  drivers/rtc/rtc-s3c.c:680:3: warning: initialization makes pointer from integer without a cast [enabled by default]
  drivers/rtc/rtc-s3c.c:680:3: warning: (near initialization for `s3c_rtc_dt_match[3].data') [enabled by default]
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix this error:

  drivers/rtc/rtc-s3c.c: At top level:
  drivers/rtc/rtc-s3c.c:671:3: error: request for member `data' in something not a structure or union
  drivers/rtc/rtc-s3c.c:674:3: error: request for member `data' in something not a structure or union
  drivers/rtc/rtc-s3c.c:677:3: error: request for member `data' in something not a structure or union
  drivers/rtc/rtc-s3c.c:680:3: error: request for member `data' in something not a structure or union
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add missing maintainer info for PCDP console code.
Signed-off-by: Khalid Aziz <khalid.aziz@hp.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We should use the accessor res_counter_read_u64 for that.

Although a purely cosmetic change is sometimes better delayed, to avoid
conflicting with other people's work, we are starting to have people
touching this code as well, and reproducing the open code behavior
because that's the standard =)

Time to fix it, then.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

efi_rtc_init() uses platform_driver_probe(), so there's no need to also
set efi_rtc_driver's probe member (as it won't be used anyway).  This
fixes a modpost section mismatch warning (as efi_rtc_probe() validly is
__init).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwclock refuses to set date/time if RTC registers contain invalid
values.  Check the date/time register values at probe time and
initialize them to make hwclock happy.
Signed-off-by: Andreas Dumberger <andreas.dumberger@tqs.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/proc/sys/kernel/random/boot_id can be read concurrently by userspace
processes.  If two (or more) user-space processes concurrently read
boot_id when sysctl_bootid is not yet assigned, a race can occur making
boot_id differ between the reads.  Because the whole point of the boot id
is to be unique across a kernel execution, fix this by protecting this
operation with a spinlock.

Given that this operation is not frequently used, hitting the spinlock
on each call should not be an issue.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

action != CPU_DEAD || action != CPU_DEAD_FROZEN is always true.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In v3.3-rc1, the global LRU was removed in commit 925b7673 ("mm:
make per-memcg LRU lists exclusive").  The patch fixes up the memcg
docs.

I left the swap session to someone who has better understanding of
'memory+swap'.
Signed-off-by: Ying Han <yinghan@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull irqdomain bug fixes from Grant Likely:
 "This branch fixes a bug in irq_create_mapping() where an error return
  from irq_alloc_desc_from() gets ignored.

  It also removes irq_virq_count to fix a bug on powerpc where the
  irqdomain code does not find irqs allocated above the CONFIG_NR_IRQS
  boundary.

  The remaining patches get rid of an completely pointless export and
  fix some minor bugs in the irqdomain debug output."

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  irq_domain: Move irq_virq_count into NOMAP revmap
  irqdomain: Fix debugfs formatting
  irq_domain: correct the debugfs file name
  irq: Kill pointless irqd_to_hw export
  irq/irq_domain: Quit ignoring error returns from irq_alloc_desc_from().

Pull input updates from Dmitry Torokhov:
 "Just a few small fixes..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: da9052 - fix memory leak in da9052_onkey_probe()
  Input: gpio_mouse - use linux/gpio.h rather than asm/gpio.h
  Input: trackpoint - use psmouse_fmt() for messages
  Input: elantech - v4 is a clickpad, with only one button
  Input: elantech - reset touchpad before configuring it
  Input: sentelic - filter taps in absolute mode
  Input: tps6507x-ts - fix MODULE_ALIAS to match driver name

Pull vfs fixes from Al Viro:
 "Regression fix in mtdchar_open(), fix for a really old leak
  (almost never hit in practice - it's a b0rken failure exit in
  simple_fill_super()) and a typo fix in vfs.txt (misspelled
  method type)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  typo fix in Documentation/filesystems/vfs.txt
  dentry leak in simple_fill_super() failure exit
  fix breakage in mtdchar_open(), sanitize failure exits

Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-intel-fixes

* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
  drm/exynos: fixed exynos broken ioctl
  drm/exynos: fix to pointer manager member of struct exynos_drm_subdrv
  drm/exynos: fix struct for operation callback functions to driver name
  drm/exynos: use define instead of default_win member in struct mixer_context
  drm/exynos: rename s/HDMI_OVERLAY_NUMBER/MIXER_WIN_NR
  drm/exynos: remove unused codes in hdmi and mixer
  drm/exynos: remove unnecessary type conversion of hdmi and mixer
  drm/exynos: add format list of plane
  drm/exynos: fixed duplicated page allocation bug.
  drm/exynos: fixed page align and code clean.

Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-intel-fixes

Daniel Vetter writes:
3 regression fixes:
- disable gmbus again, too broken for 3.4, we'll try again for 3.5
- dp bandwidth computation fix, we've lost the 6bpc dithering flag
 sometimes, this is a 3.3 regression (maybe even earlier for some
 configurations).
- fix resume regression caused by the gen2/3 fencing fix merged into -rc2.

And a few other fixes:
- gpu hang fix for i845 (Chris)
- sprite fix (Armin Reese)
- crtc disable vs. scanlinewait race fix (Chris)
- rc6 module option read-only, it confused testers (Jesse)
- fbc related blitter death hw workaround, note that we disable fbc on snb
 by default anyway.

With these fixes we have one 3.4 regression outstanding: One of the
cleanup patches for the interlaced support managed to confuse the lvds
panel fitter when upscaling. The root-cause is still unclear, but test
patches are awaiting feedback from the reporter.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: clear fencing tracking state when retiring requests
  drm/i915: make rc6 module parameter read-only
  drm/i915: implement ColorBlt w/a
  drm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g
  Revert "drm/i915: reenable gmbus on gen3+ again"
  drm/i915: properly compute dp dithering for user-created modes
  drm/i915: Finish any pending operations on the framebuffer before disabling
  drm/i915: Removed IVB forced enable of sprite dest key.

Correct path names in API documentation for usbtmc
Signed-off-by: Stephen Lewis <lewis@sdf.lonestar.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'for-usb-linus-2012-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus

Hi Greg,

Here's 11 xHCI bug fixes for 3.4.

Some of the patches fix issues with crashes on system resume related to
VIA xHCI host controllers accessing bad memory addresses.  The patches
change the register restore ordering, so I had several vendors confirm
that the patches don't break their xHCI hosts.

Elric Fu confirms this patchset fixes the VIA issue, Alex He confirms
the changes does not break suspend/resume on AMD xHCI systems, and I've
made sure it doesn't break Intel host controllers.  I have not heard
back from Felipe about the TI host, so at this point, I'm just going to
send them off.

Several of the patches are marked for stable.  Please pull.

Sarah Sharp

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

this patch removes the pointer of uint64_t *edid. it should be just
a uint64_t.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

This fixes a resume regression introduced in

commit 7dd49065
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Mar 21 10:48:18 2012 +0000

    drm/i915: Mark untiled BLT commands as fenced on gen2/3

which fixed fencing tracking for untiled blt commands.

A side effect of that patch was that now also untiled objects have a
non-zero obj->last_fenced_seqno to track when a fence can be set up
after a pipelined tiling change. Unfortunately this was only cleared
by the fence setup and teardown code, resulting in tons of untiled but
inactive objects with non-zero last_fenced_seqno.

Now after resume we completely reset the seqno tracking, both on the
driver side (by setting dev_priv->next_seqno = 1) and on the hw side
(by allocating a new hws page, which contains the seqnos). Hilarity
and indefinite waits ensued from the stale seqnos in
obj->last_fenced_seqno from before the suspend.

The fix is to properly clear the fencing tracking state like we
already do for the normal gpu rendering while moving objects off the
active list.
Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>