- 19 Oct, 2007 40 commits
-
-
Nadia Derbey authored
This patch introduces ipcs storage into IDRs. The main changes are: . This ipc_ids structure is changed: the entries array is changed into a root idr structure. . The grow_ary() routine is removed: it is not needed anymore when adding an ipc structure, since we are now using the IDR facility. . The ipc_rmid() routine interface is changed: . there is no need for this routine to return the pointer passed in as argument: it is now declared as a void . since the id is now part of the kern_ipc_perm structure, no need to have it as an argument to the routine Signed-off-by:Nadia Derbey <Nadia.Derbey@bull.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Gautham R Shenoy authored
Some of the per-cpu counters and thus their locks are accessed from IRQ contexts. This can cause a deadlock if it interrupts a cpu-offline thread which is transferring a dead-cpu's counts to the global counter. Add appropriate IRQ protection in the cpu-hotplug callback path. Signed-off-by:
Gautham R Shenoy <ego@in.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
cpu-hot-add should be fail if cpu is not set in cpu_possible_map. If go ahead, the system will panic soon. Especially, arch which requires additional_cpus= parameter should handle this. Tested on ia64. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Cliff Wickman authored
When a cpu is disabled, move_task_off_dead_cpu() is called for tasks that have been running on that cpu. Currently, such a task is migrated: 1) to any cpu on the same node as the disabled cpu, which is both online and among that task's cpus_allowed 2) to any cpu which is both online and among that task's cpus_allowed It is typical of a multithreaded application running on a large NUMA system to have its tasks confined to a cpuset so as to cluster them near the memory that they share. Furthermore, it is typical to explicitly place such a task on a specific cpu in that cpuset. And in that case the task's cpus_allowed includes only a single cpu. This patch would insert a preference to migrate such a task to some cpu within its cpuset (and set its cpus_allowed to its entire cpuset). With this patch, migrate the task to: 1) to any cpu on the same node as the disabled cpu, which is both online and among that task's cpus_allowed 2) to any online cpu within the task's cpuset 3) to any cpu which is both online and among that task's cpus_allowed In order to do this, move_task_off_dead_cpu() must make a call to cpuset_cpus_allowed_locked(), a new subset of cpuset_cpus_allowed(), that will not block. (name change - per Oleg's suggestion) Calls are made to cpuset_lock() and cpuset_unlock() in migration_call() to set the cpuset mutex during the whole migrate_live_tasks() and migrate_dead_tasks() procedure. [akpm@linux-foundation.org: build fix] [pj@sgi.com: Fix indentation and spacing] Signed-off-by:Cliff Wickman <cpw@sgi.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Christoph Lameter <clameter@sgi.com> Cc: Paul Jackson <pj@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
Paul Jackson <pj@sgi.com> Signed-off-by:
-
Paul Menage authored
Replace "cont" with "cgrp" and other misc renaming This patch finishes some of the names that got missed in the great "task containers" -> "control groups" rename. Primarily it renames the local variable "cont" to "cgrp" in a number of places, and renames the CONT_* enum members to CGRP_*. This patch is not intended to have any effect on the generated code; the output of "objdump -d kernel/cgroup.o" is unchanged. Signed-off-by:
Paul Menage <menage@google.com> Acked-by:
-
Pavel Emelyanov authored
There are two places that do so - the cgroups subsystem and the autofs code. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Cc: Ian Kent <raven@themaw.net> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Pavel Emelyanov authored
The sync_master_pid and sync_backup_pid are set in set_sync_pid() and are used later for set/not-set checks and in printk. So it is safe to use the global pid value in this case. Signed-off-by:
Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by:
-
Pavel Emelyanov authored
When removing the explicit task_struct->pid usage I found that proc_readfd_common() and proc_pident_readdir() get this field, but do not use it at all. So this cleanup is a cheap help with the task_struct->pid isolation. Signed-off-by:
-
Alexey Dobriyan authored
One of the easiest things to isolate is the pid printed in kernel log. There was a patch, that made this for arch-independent code, this one makes so for arch/xxx files. It took some time to cross-compile it, but hopefully these are all the printks in arch code. Signed-off-by:
Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by:
-
Pavel Emelyanov authored
The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by:
-
Pavel Emelyanov authored
The pgrp field is not used widely around the kernel so it is now marked as deprecated with appropriate comment. The initialization of INIT_SIGNALS is trimmed because a) they are set to 0 automatically; b) gcc cannot properly initialize two anonymous (the second one is the one with the session) unions. In this particular case to make it compile we'd have to add some field initialized right before the .pgrp. This is the same patch as the 1ec320af one (from Cedric), but for the pgrp field. Some progress report: We have to deprecate the pid, tgid, session and pgrp fields on struct task_struct and struct signal_struct. The session and pgrp are already deprecated. The tgid value is close to being such - the worst known usage in in fs/locks.c and audit code. The pid field deprecation is mainly blocked by numerous printk-s around the kernel that print the tsk->pid to log. Signed-off-by:
-
Eugene Teo authored
tsk->exit_state can only be 0, EXIT_ZOMBIE, or EXIT_DEAD. A non-zero test is the same as tsk->exit_state & (EXIT_ZOMBIE | EXIT_DEAD), so just testing tsk->exit_state is sufficient. Signed-off-by:
Eugene Teo <eugeneteo@kernel.sg> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Neil Horman authored
Currently, there exists no method for a process to query the resource limits of another process. They can be inferred via some mechanisms but they cannot be explicitly determined. Given that this information can be usefull to know during the debugging of an application, I've written this patch which exports all of a processes limits via /proc/<pid>/limits. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Jiri Slaby authored
remove BITS_TO_TYPE macro I realized, that it is actually the same as DIV_ROUND_UP, use it instead. [akpm@linux-foundation.org: build fix] Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Jiri Slaby authored
FlashPoint, use BIT instead of BITW BITW was an ushort variant of BIT, use BIT instead Signed-off-by:
-
Jiri Slaby authored
define global BIT macro move all local BIT defines to the new globally define macro. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by:
-
Jiri Slaby authored
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by:
Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by:
-
Jiri Slaby authored
define first set of BIT* macros - move BITOP_MASK and BITOP_WORD from asm-generic/bitops/atomic.h to include/linux/bitops.h and rename it to BIT_MASK and BIT_WORD - move BITS_TO_LONGS and BITS_PER_BYTE to bitops.h too and allow easily define another BITS_TO_something (e.g. in event.c) by BITS_TO_TYPE macro Remaining (and common) BIT macro will be defined after all occurences and conflicts will be sorted out in the patches. Signed-off-by:
-
Jiri Slaby authored
amba-pl011, rename BIT macro Signed-off-by:
-
Jiri Slaby authored
s2io, rename BIT macro BIT macro will be global definiton of (1<<x) Signed-off-by:
-
Jiri Slaby authored
i2c-pxa, rename BIT macro to PXA_BIT BIT macro will be global definiton of (1 << x) Signed-off-by:
-
Krzysztof Helt authored
This patch fixes errors and warnings pointed out by the checkpatch.pl script. Antonino Daplas replaced BIT with ENCODE_BIT. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Jiri Slaby authored
cyber2000fb, rename BIT macro BIT will be global macro for (1 << x) Signed-off-by:
-
Jiri Slaby authored
forbid asm/bitops.h direct inclusion Because of compile errors that may occur after bit changes if asm/bitops.h is included directly without e.g. linux/kernel.h which includes linux/bitops.h, forbid direct inclusion of asm/bitops.h. Thanks to Adrian Bunk. Signed-off-by:
-
Jiri Slaby authored
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Jiri Slaby authored
fs/select, remove unused macros this is due to preparation for global BIT macro Signed-off-by:
-
Jiri Slaby authored
This new version guarantees amb_bit switch in small enough intervals, so that the device won't stop working in the middle of a movement anymore. However it preserves old (openhaptics) functionality. Signed-off-by:
-
Jiri Slaby authored
Signed-off-by:
-
Jiri Slaby authored
Wait after disabling device's interrupt until the handler finishes its work if still in progress. Signed-off-by:
-
Paul Menage authored
Cause writes to cpuset "cpus" file to update cpus_allowed for member tasks: - collect batches of tasks under tasklist_lock and then call set_cpus_allowed() on them outside the lock (since this can sleep). - add a simple generic priority heap type to allow efficient collection of batches of tasks to be processed without duplicating or missing any tasks in subsequent batches. - make "cpus" file update a no-op if the mask hasn't changed - fix race between update_cpumask() and sched_setaffinity() by making sched_setaffinity() post-check that it's not running on any cpus outside cpuset_cpus_allowed(). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Paul Jackson authored
Decrustify the kernel/cpuset.c 'cpus' and 'mems' updating code. Other than subtle improvements in the consistency of identifying white space at the beginning and end of passed in masks, this doesn't make any visible difference in behaviour. But it's one or two hundred kernel text bytes smaller, and easier to understand. [akpm@linux-foundation.org: coding-style fix] Signed-off-by:
-
Paul Jackson authored
Add a new per-cpuset flag called 'sched_load_balance'. When enabled in a cpuset (the default value) it tells the kernel scheduler that the scheduler should provide the normal load balancing on the CPUs in that cpuset, sometimes moving tasks from one CPU to a second CPU if the second CPU is less loaded and if that task is allowed to run there. When disabled (write "0" to the file) then it tells the kernel scheduler that load balancing is not required for the CPUs in that cpuset. Now even if this flag is disabled for some cpuset, the kernel may still have to load balance some or all the CPUs in that cpuset, if some overlapping cpuset has its sched_load_balance flag enabled. If there are some CPUs that are not in any cpuset whose sched_load_balance flag is enabled, the kernel scheduler will not load balance tasks to those CPUs. Moreover the kernel will partition the 'sched domains' (non-overlapping sets of CPUs over which load balancing is attempted) into the finest granularity partition that it can find, while still keeping any two CPUs that are in the same shed_load_balance enabled cpuset in the same element of the partition. This serves two purposes: 1) It provides a mechanism for real time isolation of some CPUs, and 2) it can be used to improve performance on systems with many CPUs by supporting configurations in which load balancing is not done across all CPUs at once, but rather only done in several smaller disjoint sets of CPUs. This mechanism replaces the earlier overloading of the per-cpuset flag 'cpu_exclusive', which overloading was removed in an earlier patch: cpuset-remove-sched-domain-hooks-from-cpusets See further the Documentation and comments in the code itself. [akpm@linux-foundation.org: don't be weird] Signed-off-by:Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Pavel Emelyanov authored
Since these are expanded into call to pid_nr_ns() anyway, it's OK to move the whole routine out-of-line. This is a cheap way to save ~100 bytes from vmlinux. Together with the previous two patches, it saves half-a-kilo from the vmlinux. Un-inline other (currently inlined) functions must be done with additional performance testing. Signed-off-by:
-
Pavel Emelyanov authored
The find_pid/_vpid/_pid_ns functions are used to find the struct pid by its id, depending on whic id - global or virtual - is used. The find_vpid() is a macro that pushes the current->nsproxy->pid_ns on the stack to call another function - find_pid_ns(). It turned out, that this dereference together with the push itself cause the kernel text size to grow too much. Move all these out-of-line. Together with the previous patch this saves a bit less that 400 bytes from .text section. Signed-off-by:
-
Pavel Emelyanov authored
With pid namespaces this field is now dangerous to use explicitly, so hide it behind the helpers. Also the pid and pgrp fields o task_struct and signal_struct are to be deprecated. Unfortunately this patch cannot be sent right now as this leads to tons of warnings, so start isolating them, and deprecate later. Actually the p->tgid == pid has to be changed to has_group_leader_pid(), but Oleg pointed out that in case of posix cpu timers this is the same, and thread_group_leader() is more preferable. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Pavel Emelyanov authored
Since we've switched from using pid->nr to pid->upids->nr some fields on struct pid are no longer needed Signed-off-by:
-
Pavel Emelyanov authored
The find_task_by_something is a set of macros are used to find task by pid depending on what kind of pid is proposed - global or virtual one. All of them are wrappers above the most generic one - find_task_by_pid_type_ns() - and just substitute some args for it. It turned out, that dereferencing the current->nsproxy->pid_ns construction and pushing one more argument on the stack inline cause kernel text size to grow. This patch moves all this stuff out-of-line into kernel/pid.c. Together with the next patch it saves a bit less than 400 bytes from the .text section. Signed-off-by:
-
Pavel Emelyanov authored
This is the largest patch in the set. Make all (I hope) the places where the pid is shown to or get from user operate on the virtual pids. The idea is: - all in-kernel data structures must store either struct pid itself or the pid's global nr, obtained with pid_nr() call; - when seeking the task from kernel code with the stored id one should use find_task_by_pid() call that works with global pids; - when showing pid's numerical value to the user the virtual one should be used, but however when one shows task's pid outside this task's namespace the global one is to be used; - when getting the pid from userspace one need to consider this as the virtual one and use appropriate task/pid-searching functions. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: yet nuther build fix] [akpm@linux-foundation.org: remove unneeded casts] Signed-off-by:
-
Sukadev Bhattiprolu authored
Terminate all processes in a namespace when the reaper of the namespace is exiting. We do this by walking the pidmap of the namespace and sending SIGKILL to all processes. Signed-off-by:
-
Sukadev Bhattiprolu authored
Only the global-init process must be special - any other cgroup-init process must be killable to prevent run-away processes in the system. TODO: Ideally we should allow killing the cgroup-init only from parent cgroup and prevent it being killed from within the cgroup. But that is a more complex change and will be addressed by a follow-on patch. For now allow the cgroup-init to be terminated by any process with sufficient privileges. Signed-off-by:
-
