And use proc private data directly instead of doing a detour
through seq->private.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And stop trying to get a reference on the submodule, procfs code deals
with release after an unloaded module and thus removed proc entry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

And stop messing with try_module_get on THIS_MODULE, which doesn't make
any sense here.
Signed-off-by: Christoph Hellwig <hch@lst.de>

And use the root resource directly from the proc private data.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Unwind the registration loop into individual calls.  Switch to use
proc_create_single where applicable.

Also don't bother handling proc_create* failures - the driver works
perfectly fine without the proc files, and the cleanup will handle
missing files gracefully.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.

Also don't bother handling proc_create* failures - the driver works
perfectly fine without the proc files, and the cleanup will handle
missing files gracefully.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_single.

Also don't bother handling proc_create* failures - the driver works
perfectly fine without the proc files, and the cleanup will handle
missing files gracefully.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls.  Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Variant of proc_create_data that directly take a seq_file show
callback and deals with network namespaces in ->open and ->release.
All callers of proc_create + single_open_net converted over, and
single_{open,release}_net are removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Variants of proc_create{,_data} that directly take a struct seq_operations
and deal with network namespaces in ->open and ->release.  All callers of
proc_create + seq_open_net converted over, and seq_{open,release}_net are
removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>

This helper deals with single_{open,release}_net internals and thus
belongs here.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Just use the address family from the proc private data instead of copying
it into per-file data.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Remove a couple indirections to make the code look like most other
protocols.
Signed-off-by: Christoph Hellwig <hch@lst.de>

The code should be using the pid namespace from the procfs mount
instead of trying to look it up during open.
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pass the hashtable to the proc private data instead of copying
it into the per-file private data.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Remove the pointless ping_seq_afinfo indirection and make the code look
like most other protocols.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Avoid most of the afinfo indirections and just call the proc helpers
directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Remove a couple indirections to make the code look like most other
protocols.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Variant of proc_create_data that directly take a struct seq_operations
argument + a private state size and drastically reduces the boilerplate
code in the callers.

All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Variants of proc_create{,_data} that directly take a struct seq_operations
argument and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Common code for creating a regular file.  Factor out of proc_create_data, to
be reused by other functions soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Return registered entry on success, return NULL on failure and free the
passed in entry.  Also expose it in internal.h as we'll start using it
in proc_net.c soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Signed-off-by: Christoph Hellwig <hch@lst.de>

Factor out retrieving the per-sb pid namespaces from the sb private data
into an easier to understand helper.
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Otherwise we will leak a reference to the network namespace.
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull x86/pti updates from Thomas Gleixner:
 "A mixed bag of fixes and updates for the ghosts which are hunting us.

  The scheduler fixes have been pulled into that branch to avoid
  conflicts.

   - A set of fixes to address a khread_parkme() race which caused lost
     wakeups and loss of state.

   - A deadlock fix for stop_machine() solved by moving the wakeups
     outside of the stopper_lock held region.

   - A set of Spectre V1 array access restrictions. The possible
     problematic spots were discuvered by Dan Carpenters new checks in
     smatch.

   - Removal of an unused file which was forgotten when the rest of that
     functionality was removed"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Remove unused file
  perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr
  perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver
  perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()
  perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*
  perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]
  sched/autogroup: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
  sched/core: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
  sched/core: Introduce set_special_state()
  kthread, sched/wait: Fix kthread_parkme() completion issue
  kthread, sched/wait: Fix kthread_parkme() wait-loop
  sched/fair: Fix the update of blocked load when newly idle
  stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock

Pull scheduler fix from Thomas Gleixner:
 "Revert the new NUMA aware placement approach which turned out to
  create more problems than it solved"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "sched/numa: Delay retrying placement for automatic NUMA balance after wake_affine()"

Pull perf tooling fixes from Thomas Gleixner:
 "Another small set of perf tooling fixes and updates:

   - Revert "perf pmu: Fix pmu events parsing rule", as it broke Intel
     PT event description parsing (Arnaldo Carvalho de Melo)

   - Sync x86's cpufeatures.h and kvm UAPI headers with the kernel
     sources, suppressing the ABI drift warnings (Arnaldo Carvalho de
     Melo)

   - Remove duplicated entry for westmereep-dp in Intel's mapfile.csv
     (William Cohen)

   - Fix typo in 'perf bench numa' options description (Yisheng Xie)"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "perf pmu: Fix pmu events parsing rule"
  tools headers kvm: Sync ARM UAPI headers with the kernel sources
  tools headers kvm: Sync uapi/linux/kvm.h with the kernel sources
  tools headers: Sync x86 cpufeatures.h with the kernel sources
  perf vendor events intel: Remove duplicated entry for westmereep-dp in mapfile.csv
  perf bench numa: Fix typo in options

Pull dma-mapping fix from Christoph Hellwig:
 "Just one little fix from Jean to avoid a harmless but very annoying
  warning, especially for the drm code"

* tag 'dma-mapping-4.17-5' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: silent unwanted warning "buffer is full"

Pull cifs fixes from Steve French:
 "Some small SMB3 fixes for 4.17-rc5, some for stable"

* tag '4.17-rc4-SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: directory sync should not return an error
  cifs: smb2ops: Fix listxattr() when there are no EAs
  cifs: smbd: Enable signing with smbdirect
  cifs: Allocate validate negotiation request through kmalloc

Pull thermal fixes from Zhang Rui:

 - fix NULL pointer dereference on module load/probe for int3403_thermal
   driver

 - fix an emergency shutdown issue on exynos thermal driver

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: exynos: Propagate error value from tmu_read()
  thermal: exynos: Reading temperature makes sense only when TMU is turned on
  thermal: int3403_thermal: Fix NULL pointer deref on module load / probe

Pull block fixes from Jens Axboe:
 "Just a few NVMe fixes this round - one fixing a use-after-free, one
  fixes the return value after controller reset, and the last one fixes
  an issue where some drives will spuriously EIO. We should get these
  into 4.17"

* tag 'for-linus-20180511' of git://git.kernel.dk/linux-block:
  nvme: add quirk to force medium priority for SQ creation
  nvme: Fix sync controller reset return
  nvme: fix use-after-free in nvme_free_ns_head

If DMA_ATTR_NO_WARN is passed to swiotlb_alloc_buffer(), it should be
passed further down to swiotlb_tbl_map_single(). Otherwise we escape
half of the warnings but still log the other half.

This is one of the multiple causes of spurious warnings reported at:
https://bugs.freedesktop.org/show_bug.cgi?id=104082Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 0176adb0 ("swiotlb: refactor coherent buffer allocation")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: stable@vger.kernel.org # v4.16

This reverts commit 7347fc87.

Srikar Dronamra pointed out that while the commit in question did show
a performance improvement on ppc64, it did so at the cost of disabling
active CPU migration by automatic NUMA balancing which was not the intent.
The issue was that a serious flaw in the logic failed to ever active balance
if SD_WAKE_AFFINE was disabled on scheduler domains. Even when it's enabled,
the logic is still bizarre and against the original intent.

Investigation showed that fixing the patch in either the way he suggested,
using the correct comparison for jiffies values or introducing a new
numa_migrate_deferred variable in task_struct all perform similarly to a
revert with a mix of gains and losses depending on the workload, machine
and socket count.

The original intent of the commit was to handle a problem whereby
wake_affine, idle balancing and automatic NUMA balancing disagree on the
appropriate placement for a task. This was particularly true for cases where
a single task was a massive waker of tasks but where wake_wide logic did
not apply.  This was particularly noticeable when a futex (a barrier) woke
all worker threads and tried pulling the wakees to the waker nodes. In that
specific case, it could be handled by tuning MPI or openMP appropriately,
but the behavior is not illogical and was worth attempting to fix. However,
the approach was wrong. Given that we're at rc4 and a fix is not obvious,
it's better to play safe, revert this commit and retry later.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: efault@gmx.de
Cc: ggherdovich@suse.cz
Cc: hpa@zytor.com
Cc: matt@codeblueprint.co.uk
Cc: mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/20180509163115.6fnnyeg4vdm2ct4v@techsingularity.netSigned-off-by: Ingo Molnar <mingo@kernel.org>