Add support for setting counters on neighbors based on dpipe's host table
counter status. This patch also adds the ability for getting the counter
value, which will be used by the dpipe host table implementation in the
next patches.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is done as a preparation before introducing support for neighbor
counters. The flow counter's type enum is used by many registers, yet,
until now it was used only by mgpc and thus it was private. This patch
updates the namespace for more generic usage.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add IPv4 host table initial support.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change label name for case of erif table init failure.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is done as a preparation before introducing the ability to dump the
host table via dpipe, and to count the table size. The mlxsw's neighbor
representative struct stays private to the router module.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The entry clear routine can be shared between the drivers, thus it is
moved inside devlink.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Up until now the dpipe table's size was static and known at registration
time. The host table does not have constant size and it is resized in
dynamic manner. In order to support this behavior the size is changed
to be obtained dynamically via an op.

This patch also adjust the current dpipe table for the new API.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix ERIF's table operations name space.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will be used by the IPv4 host table which will be introduced in the
following patches. This header is global and can be reused by many
drivers.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will be used by the IPv4 host table which will be introduced in the
following patches. This header is global and can be reused by many
drivers.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No need to test for it in fast-path, every dev in bpf_dtab_netdev
is guaranteed to be non-NULL, otherwise dev_map_update_elem() will
fail in the first place.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As eBPF JIT support for arm32 was added recently with
commit 39c13c20, it seems appropriate to
add arm32 as arch with support for eBPF JIT in bpf and sysctl docs as well.
Signed-off-by: Shubham Bansal <illusionist.neo@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edward Cree says:

====================
bpf: verifier fixes

Fix a couple of bugs introduced in my recent verifier patches.
Patch #2 does slightly increase the insn count on bpf_lxc.o, but only by
 about a hundred insns (i.e. 0.2%).

v2: added test for write-marks bug (patch #1); reworded comment on
 propagate_liveness() for clarity.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The liveness tracking algorithm is quite subtle; add comments to explain it.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The optimisation it does is broken when the 'new' register value has a
 variable offset and the 'old' was constant.  I broke it with my pointer
 types unification (see Fixes tag below), before which the 'new' value
 would have type PTR_TO_MAP_VALUE_ADJ and would thus not compare equal;
 other changes in that patch mean that its original behaviour (ignore
 min/max values) cannot be restored.
Tests on a sample set of cilium programs show no change in count of
 processed instructions.

Fixes: f1174f77 ("bpf/verifier: rework value tracking")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The test makes a read through a map value pointer, then considers pruning
 a branch where the register holds an adjusted map value pointer.  It
 should not prune, but currently it does.
Signed-off-by: Alexei Starovoitov <ast@fb.com>
[ecree@solarflare.com: added test-name and patch description]
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fact that writes occurred in reaching the continuation state does
 not screen off its reads from us, because we're not really its parent.
So detect 'not really the parent' in do_propagate_liveness, and ignore
 write marks in that case.

Fixes: dc503a8a ("bpf/verifier: track liveness for pruning")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Writes in straight-line code should not prevent reads from propagating
 along jumps.  With current verifier code, the jump from 3 to 5 does not
 add a read mark on 3:R0 (because 5:R0 has a write mark), meaning that
 the jump from 1 to 3 gets pruned as safe even though R0 is NOT_INIT.

Verifier output:
0: (61) r2 = *(u32 *)(r1 +0)
1: (35) if r2 >= 0x0 goto pc+1
 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
2: (b7) r0 = 0
3: (35) if r2 >= 0x0 goto pc+1
 R0=inv0 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
4: (b7) r0 = 0
5: (95) exit

from 3 to 5: safe

from 1 to 3: safe
processed 8 insns, stack depth 0
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

iph is being assigned the same value twice; remove the redundant
first assignment. (Thanks to Nikolay Aleksandrov for pointing out
that the first asssignment should be removed and not the second)

Fixes warning:
net/ipv4/ip_gre.c:265:2: warning: Value stored to 'iph' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

genl_ops are not supposed to change at runtime. All functions
working with genl_ops provided by <net/genetlink.h> work with
const genl_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The functions set_ctrl0 and set_ctrl1 are local to the source and do
not need to be in global scope, so make them static.

Cleans up sparse warnings:
symbol 'set_ctrl0' was not declared. Should it be static?
symbol 'set_ctrl1' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is necessary to allow the user to disable peeking with
offset once it's enabled.
Unix sockets already allow the above, with this patch we
permit it for udp[6] sockets, too.

Fixes: 627d2d6b ("udp: enable MSG_PEEK at non-zero offset")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: spectrum: Introduce multichain TC offload

This patchset introduces offloading of rules added to chain with
non-zero index, which was previously forbidden. Also, goto_chain
termination action is offloaded allowing to jump to processing
of desired chain.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If action is gact goto_chain, offload it to HW by jumping to another
ruleset.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to lookup ruleset in order to offload goto_chain termination
action. This patch adds it.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For goto_chain action we need to know group_id of a ruleset to jump to.
Provide infrastructure in order to get it.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add helpers to find out if a gact instance is goto_chain termination
action and to get chain index.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reflect chain index coming down from TC core and create a ruleset per
chain. Note that only chain 0, being the implicit chain, is bound to the
device for processing. The rest of chains have to be "jumped-to" by
actions.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Antoine Tenart says:

====================
net: mvpp2: software TSO support

This series adds the s/w TSO support in the PPv2 driver, in addition to
two cosmetic commits. As stated in patch 3/3:

Using iperf and 10G ports, using TSO shows a significant performance
improvement by a factor 2 to reach around 9.5Gbps in TX; as well as a
significant CPU usage drop (from 25% to 15%).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch uses the tso API to implement the tso functionality in Marvell
PPv2 driver.

Using iperf and 10G ports, using TSO shows a significant performance
improvement by a factor 2 to reach around 9.5Gbps in TX; as well as a
significant CPU usage drop (from 25% to 15%).
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The txq size is defined by MVPP2_AGGR_TXQ_SIZE, which is sometime not
used directly but through variables. As it is a fixed value use the
define everywhere in the driver.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TSO header size was defined in many drivers. Factorize the code and
define its size in net/tso.h.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now when ipv4 route inserts a fib_info, it memcmp fib_metrics.
It means ipv4 route identifies one route also with metrics.

But when removing a route, it tries to find the route without
caring about the metrics. It will cause that the route with
right metrics can't be removed.

Thomas noticed this issue when doing the testing:

1. add:
   # ip route append 192.168.7.0/24 dev v window 1000
   # ip route append 192.168.7.0/24 dev v window 1001
   # ip route append 192.168.7.0/24 dev v window 1002
   # ip route append 192.168.7.0/24 dev v window 1003
2. delete:
   # ip route delete 192.168.7.0/24 dev v window 1002
3. show:
     192.168.7.0/24 proto boot scope link window 1001
     192.168.7.0/24 proto boot scope link window 1002
     192.168.7.0/24 proto boot scope link window 1003

The one with window 1002 wasn't deleted but the first one was.

This patch is to do metrics match when looking up and deleting
one route.
Reported-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mike Maloney says:

====================
net: Add software rx timestamp for TCP.

Add software rx timestamps for TCP, and a test to ensure consistency of
behavior between IP, UDP, and TCP implementation.

Changes since v1:
  -Initialize tss->ts[1] to 0 if caller requested any timestamps.
  -Fix test case to validate that tss->ts[1] is zero.
  -Fix tests to actually use a raw socket.
  -Fix --tcp flag to work on the test.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Validate the behavior of the combination of various timestamp socket
options, and ensure consistency across ip, udp, and tcp.
Signed-off-by: Mike Maloney <maloney@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When SOF_TIMESTAMPING_RX_SOFTWARE is enabled for tcp sockets, return the
timestamp corresponding to the highest sequence number data returned.

Previously the skb->tstamp is overwritten when a TCP packet is placed
in the out of order queue.  While the packet is in the ooo queue, save the
timestamp in the TCB_SKB_CB.  This space is shared with the gso_*
options which are only used on the tx path, and a previously unused 4
byte hole.

When skbs are coalesced either in the sk_receive_queue or the
out_of_order_queue always choose the timestamp of the appended skb to
maintain the invariant of returning the timestamp of the last byte in
the recvmsg buffer.
Signed-off-by: Mike Maloney <maloney@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the NIC firmware, the 1-bit flag indicating "firmware is loaded" moved
from SLI_SCRATCH_1 to SLI_SCRATCH_2 (these are Octeon general-purpose
scratch registers).  Make the PF driver conform to this change.

Remove code that sets the "firmware is loaded" flag because it's now the
firmware's job to do that.

In the code that detects whether or not the firmware is loaded, don't just
rely on checking the "firmware is loaded" flag because that may cause a
rare false negative.  Add code that deduces whether or not the firmware is
loaded; that will never give a false negative.

Also bump up driver version to match newer NIC firmware.
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix typo: pnet_tap_faied.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Two minor BPF cleanups

Two minor cleanups on devmap and redirect I still had
in my queue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Some minor code cleanups, while going over it I also noticed that
we're accounting the bitmap only for one CPU currently, so fix that
up as well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>