Skip to content

L
linux
Switch branch/tag
  1. 24 Jan, 2017 14 commits
  3. 23 Jan, 2017 3 commits
    • Florian Fainelli's avatar
      net: dsa: Check return value of phy_connect_direct() · 4078b76c
      Florian Fainelli authored 
      We need to check the return value of phy_connect_direct() in
dsa_slave_phy_connect() otherwise we may be continuing the
initialization of a slave network device with a PHY that already
attached somewhere else and which will soon be in error because the PHY
device is in error.

The conditions for such an error to occur are that we have a port of our
switch that is not disabled, and has the same port number as a PHY
address (say both 5) that can be probed using the DSA slave MII bus. We
end-up having this slave network device find a PHY at the same address
as our port number, and we try to attach to it.

A slave network (e.g: port 0) has already attached to our PHY device,
and we try to re-attach it with a different network device, but since we
ignore the error we would end-up initializating incorrect device
references by the time the slave network interface is opened.

The code has been (re)organized several times, making it hard to provide
an exact Fixes tag, this is a bugfix nonetheless.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4078b76c
    • Florian Fainelli's avatar
      net: phy: Avoid deadlock during phy_error() · eab12771
      Florian Fainelli authored 
      phy_error() is called in the PHY state machine workqueue context, and
calls phy_trigger_machine() which does a cancel_delayed_work_sync() of
the workqueue we execute from, causing a deadlock situation.

Augment phy_trigger_machine() machine with a sync boolean indicating
whether we should use cancel_*_sync() or just cancel_*_work().

Fixes: 3c293f4e ("net: phy: Trigger state machine on state change and not polling.")
Reported-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eab12771
    • David Ahern's avatar
      net: mpls: Fix multipath selection for LSR use case · 9f427a0e
      David Ahern authored 
      MPLS multipath for LSR is broken -- always selecting the first nexthop
in the one label case. For example:

    $ ip -f mpls ro ls
    100
            nexthop as to 200 via inet 172.16.2.2  dev virt12
            nexthop as to 300 via inet 172.16.3.2  dev virt13
    101
            nexthop as to 201 via inet6 2000:2::2  dev virt12
            nexthop as to 301 via inet6 2000:3::2  dev virt13

In this example incoming packets have a single MPLS labels which means
BOS bit is set. The BOS bit is passed from mpls_forward down to
mpls_multipath_hash which never processes the hash loop because BOS is 1.

Update mpls_multipath_hash to process the entire label stack. mpls_hdr_len
tracks the total mpls header length on each pass (on pass N mpls_hdr_len
is N * sizeof(mpls_shim_hdr)). When the label is found with the BOS set
it verifies the skb has sufficient header for ipv4 or ipv6, and find the
IPv4 and IPv6 header by using the last mpls_hdr pointer and adding 1 to
advance past it.

With these changes I have verified the code correctly sees the label,
BOS, IPv4 and IPv6 addresses in the network header and icmp/tcp/udp
traffic for ipv4 and ipv6 are distributed across the nexthops.

Fixes: 1c78efa8 ("mpls: flow-based multipath selection")
Acked-by: default avatarRobert Shearman <rshearma@brocade.com>
Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9f427a0e
  5. 22 Jan, 2017 3 commits
  7. 20 Jan, 2017 11 commits
  9. 19 Jan, 2017 5 commits
  11. 18 Jan, 2017 4 commits
    • Daniel Borkmann's avatar
      bpf: don't trigger OOM killer under pressure with map alloc · d407bd25
      Daniel Borkmann authored 
      This patch adds two helpers, bpf_map_area_alloc() and bpf_map_area_free(),
that are to be used for map allocations. Using kmalloc() for very large
allocations can cause excessive work within the page allocator, so i) fall
back earlier to vmalloc() when the attempt is considered costly anyway,
and even more importantly ii) don't trigger OOM killer with any of the
allocators.

Since this is based on a user space request, for example, when creating
maps with element pre-allocation, we really want such requests to fail
instead of killing other user space processes.

Also, don't spam the kernel log with warnings should any of the allocations
fail under pressure. Given that, we can make backend selection in
bpf_map_area_alloc() generic, and convert all maps over to use this API
for spots with potentially large allocation requests.

Note, replacing the one kmalloc_array() is fine as overflow checks happen
earlier in htab_map_alloc(), since it must also protect the multiplication
for vmalloc() should kmalloc_array() fail.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d407bd25
    • David Ahern's avatar
      lwtunnel: fix autoload of lwt modules · 9ed59592
      David Ahern authored 
      Trying to add an mpls encap route when the MPLS modules are not loaded
hangs. For example:

    CONFIG_MPLS=y
    CONFIG_NET_MPLS_GSO=m
    CONFIG_MPLS_ROUTING=m
    CONFIG_MPLS_IPTUNNEL=m

    $ ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2

The ip command hangs:
root       880   826  0 21:25 pts/0    00:00:00 ip route add 10.10.10.10/32 encap mpls 100 via inet 10.100.1.2

    $ cat /proc/880/stack
    [<ffffffff81065a9b>] call_usermodehelper_exec+0xd6/0x134
    [<ffffffff81065efc>] __request_module+0x27b/0x30a
    [<ffffffff814542f6>] lwtunnel_build_state+0xe4/0x178
    [<ffffffff814aa1e4>] fib_create_info+0x47f/0xdd4
    [<ffffffff814ae451>] fib_table_insert+0x90/0x41f
    [<ffffffff814a8010>] inet_rtm_newroute+0x4b/0x52
    ...

modprobe is trying to load rtnl-lwt-MPLS:

root       881     5  0 21:25 ?        00:00:00 /sbin/modprobe -q -- rtnl-lwt-MPLS

and it hangs after loading mpls_router:

    $ cat /proc/881/stack
    [<ffffffff81441537>] rtnl_lock+0x12/0x14
    [<ffffffff8142ca2a>] register_netdevice_notifier+0x16/0x179
    [<ffffffffa0033025>] mpls_init+0x25/0x1000 [mpls_router]
    [<ffffffff81000471>] do_one_initcall+0x8e/0x13f
    [<ffffffff81119961>] do_init_module+0x5a/0x1e5
    [<ffffffff810bd070>] load_module+0x13bd/0x17d6
    ...

The problem is that lwtunnel_build_state is called with rtnl lock
held preventing mpls_init from registering.

Given the potential references held by the time lwtunnel_build_state it
can not drop the rtnl lock to the load module. So, extract the module
loading code from lwtunnel_build_state into a new function to validate
the encap type. The new function is called while converting the user
request into a fib_config which is well before any table, device or
fib entries are examined.

Fixes: 745041e2 ("lwtunnel: autoload of lwt modules")
Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9ed59592
    • Michael Chan's avatar
      bnxt_en: Fix "uninitialized variable" bug in TPA code path. · 719ca811
      Michael Chan authored 
      In the TPA GRO code path, initialize the tcp_opt_len variable to 0 so
that it will be correct for packets without TCP timestamps.  The bug
caused the SKB fields to be incorrectly set up for packets without
TCP timestamps, leading to these packets being rejected by the stack.
Reported-by: default avatarAndy Gospodarek <andrew.gospodarek@broadocm.com>
Acked-by: default avatarAndy Gospodarek <andrew.gospodarek@broadocm.com>
Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      719ca811
    • Daniel Gonzalez Cabanelas's avatar
      net: phy: bcm63xx: Utilize correct config_intr function · cd33b3e0
      Daniel Gonzalez Cabanelas authored 
      Commit a1cba561 ("net: phy: Add Broadcom phy library for common
interfaces") make the BCM63xx PHY driver utilize bcm_phy_config_intr()
which would appear to do the right thing, except that it does not write
to the MII_BCM63XX_IR register but to MII_BCM54XX_ECR which is
different.

This would be causing invalid link parameters and events from being
generated by the PHY interrupt.

Fixes: a1cba561 ("net: phy: Add Broadcom phy library for common interfaces")
Signed-off-by: default avatarDaniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cd33b3e0
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7