1. 04 Mar, 2019 17 commits
  2. 03 Mar, 2019 9 commits
  3. 02 Mar, 2019 14 commits
    • David S. Miller's avatar
      Merge tag 'mlx5-updates-2019-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux · d5fa9c55
      David S. Miller authored
      Saeed Mahameed says:
      
      ====================
      mlx5-updates-2019-03-01
      
      This series adds multipath offload support and contains some small updates
      to mlx5 driver.
      
      Multipath offload support from Roi Dayan:
      
      We are going to track SW multipath route and related nexthops and reflect
      that as port affinity to the HW.
      
      1) Some patches are preparation.
      2) add the multipath mode and fib events handling.
      3) add support to handle offload failure for net error, i.e.
      port down.
      4) Small updates to match the behavior of multipath
      
      Two small updates from Eran Ben Elisha,
      5) Make a function static
      6) Update PCIe supported devices list.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d5fa9c55
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next · 4e7df119
      David S. Miller authored
      Pablo Neira Ayuso says:
      
      ====================
      Netfilter/IPVS updates for net-next
      
      The following patchset contains Netfilter/IPVS updates for net-next:
      
      1) Add .release_ops to properly unroll .select_ops, use it from nft_compat.
         After this change, we can remove list of extensions too to simplify this
         codebase.
      
      2) Update amanda conntrack helper to support v3.4, from Florian Tham.
      
      3) Get rid of the obsolete BUGPRINT macro in ebtables, from
         Florian Westphal.
      
      4) Merge IPv4 and IPv6 masquerading infrastructure into one single module.
         From Florian Westphal.
      
      5) Patchset to remove nf_nat_l3proto structure to get rid of
         indirections, from Florian Westphal.
      
      6) Skip unnecessary conntrack timeout updates in case the value is
         still the same, also from Florian Westphal.
      
      7) Remove unnecessary 'fall through' comments in empty switch cases,
         from Li RongQing.
      
      8) Fix lookup to fixed size hashtable sets on big endian with 32-bit keys.
      
      9) Incorrect logic to deactivate path of fixed size hashtable sets,
         element was being tested to self.
      
      10) Remove nft_hash_key(), the bitmap set is always selected for 16-bit
          keys.
      
      11) Use boolean whenever possible in IPVS codebase, from Andrea Claudi.
      
      12) Enter close state in conntrack if RST matches exact sequence number,
          from Florian Westphal.
      
      13) Initialize dst_cache in tunnel extension, from wenxu.
      
      14) Pass protocol as u16 to xt_check_match and xt_check_target, from
          Li RongQing.
      
      15) SCTP header is granted to be in a linear area from IPVS NAT handler,
          from Xin Long.
      
      16) Don't steal packets coming from slave VRF device from the
          ip_sabotage_in() path, from David Ahern.
      
      17) Fix unsafe update of basechain stats, from Li RongQing.
      
      18) Make sure CONNTRACK_LOCKS is power of 2 to let compiler optimize
          modulo operation as bitwise AND, from Li RongQing.
      
      19) Use device_attribute instead of internal definition in the IDLETIMER
          target, from Sami Tolvanen.
      
      20) Merge redir, masq and IPv4/IPv6 NAT chain types, from Florian Westphal.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4e7df119
    • David S. Miller's avatar
      Merge branch 'for-upstream' of... · 2369afb6
      David S. Miller authored
      Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
      
      Johan Hedberg says:
      
      ====================
      pull request: bluetooth-next 2019-03-02
      
      Here's one more bluetooth-next pull request for the 5.1 kernel:
      
       - Added support for MediaTek MT7663U and MT7668U UART devices
       - Cleanups & fixes to the hci_qca driver
       - Fixed wakeup pin behavior for QCA6174A controller
      
      Please let me know if there are any issues pulling. Thanks.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2369afb6
    • David S. Miller's avatar
    • Sean Wang's avatar
      Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices · 22eaf6c9
      Sean Wang authored
      This adds the support of enabling MT7663U and MT7668U Bluetooth function
      running on the top of btmtkuart driver.
      
      There are a few differences between MT766[3,8]U and MT7622 where
      MT766[3,8]U are standalone devices based on UART transport while MT7622
      bluetooth is a built-in device on MediaTek SoC communicating with the host
      through BTIF serial transport. Thus, extra setup sequence is necessary
      for these standalone devices such as remote regulator and reset control via
      GPIO, baud rate changing handshake between the host and device and so on.
      Signed-off-by: default avatarSean Wang <sean.wang@mediatek.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      22eaf6c9
    • Sean Wang's avatar
      dt-bindings: net: bluetooth: add support for MediaTek MT7663U and MT7668U UART devices · b805c403
      Sean Wang authored
      Update binding document with adding support of MT7663U and MT7668U UART
      devices to mediatek-bluetooth.
      Reviewed-by: default avatarRob Herring <robh@kernel.org>
      Signed-off-by: default avatarSean Wang <sean.wang@mediatek.com>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      b805c403
    • Matthias Kaehlcke's avatar
      Bluetooth: hci_qca: Reduce delay after sending baudrate request for WCN3990 · 94d66714
      Matthias Kaehlcke authored
      The current 300ms delay after a baudrate change is extremely long.
      For WCN3990 it is sufficient to wait 10ms after the baudrate change
      request has been sent over the wire.
      Signed-off-by: default avatarMatthias Kaehlcke <mka@chromium.org>
      Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      94d66714
    • David S. Miller's avatar
      Merge tag 'wireless-drivers-next-for-davem-2019-03-01' of... · cf29576f
      David S. Miller authored
      Merge tag 'wireless-drivers-next-for-davem-2019-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
      
      Kalle Valo says:
      
      ====================
      wireless-drivers-next patches for 5.1
      
      Last set of patches. A new hardware support for mt76 otherwise quite
      normal.
      
      Major changes:
      
      mt76
      
      * add driver for MT7603E/MT7628
      
      ath10k
      
      * more preparation for SDIO support
      
      wil6210
      
      * support up to 20 stations in AP mode
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf29576f
    • Mao Wenan's avatar
      net: sit: fix memory leak in sit_init_net() · 07f12b26
      Mao Wenan authored
      If register_netdev() is failed to register sitn->fb_tunnel_dev,
      it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev).
      
      BUG: memory leak
      unreferenced object 0xffff888378daad00 (size 512):
        comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s)
        hex dump (first 32 bytes):
          00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00  ................
          00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      backtrace:
          [<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline]
          [<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline]
          [<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline]
          [<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970
          [<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848
          [<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129
          [<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314
          [<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437
          [<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107
          [<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165
          [<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919
          [<00000000fff78746>] copy_process kernel/fork.c:1713 [inline]
          [<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224
          [<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
          [<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
          [<0000000039acff8a>] 0xffffffffffffffff
      Signed-off-by: default avatarMao Wenan <maowenan@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      07f12b26
    • Andrew Lunn's avatar
      net: dsa: mv88e6xxx: Fix statistics on mv88e6161 · a6da21bb
      Andrew Lunn authored
      Despite what the datesheet says, the silicon implements the older way
      of snapshoting the statistics. Change the op.
      
      Reported-by: Chris.Healy@zii.aero
      Tested-by: Chris.Healy@zii.aero
      Fixes: 0ac64c39 ("net: dsa: mv88e6xxx: mv88e6161 uses mv88e6320 stats snapshot")
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a6da21bb
    • Ido Schimmel's avatar
      net: ipv4: Fix NULL pointer dereference in route lookup · 2a8e4997
      Ido Schimmel authored
      When calculating the multipath hash for input routes the flow info is
      not available and therefore should not be used.
      
      Fixes: 24ba1440 ("route: Add multipath_hash in flowi_common to make user-define hash")
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Cc: wenxu <wenxu@ucloud.cn>
      Acked-by: default avatarwenxu <wenxu@ucloud.cn>
      Acked-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2a8e4997
    • David S. Miller's avatar
      Merge branch 'net-mvpp2-fixes-and-improvements' · 04c2632a
      David S. Miller authored
      Antoine Tenart says:
      
      ====================
      net: mvpp2: fixes and improvements
      
      This series aims to improve the Marvell PPv2 driver and to fix various
      issues we encountered while testing the ports in many different
      configurations. The series is based on top of Russell PPv2 phylink
      rework and improvement.
      
      I'm not sending a v2 of the previous fixes series as half the patches
      are not the same and lots of development happened in between.
      
      While this series contains fixes, it's sent to net-next as it is based
      on top of Russell patches that were merged into net-next. I'm also
      aiming at net-next as the series reworks critical paths of the PPv2
      driver, such as the reset handling of various blocks, to let more weeks
      for users to tests and for possible fixes to be sent before it lands
      into a stable kernel version.
      
      The series is divided into three parts:
      
      - Patches 1 to 3 are cosmetic changes, sent alongside the series, as I
        saw these small issues while working on this.
      
      - Patches 5 to 8 are fixing (or improving) individual issues that we
        found while testing PPv2.1 and PPv2.2 ports while using various
        interfaces.
      
        Notable fixes are we support back RGMII interfaces (on both PPv2.1 and
        PPv2.2), as their support was broken by previous patches. We also
        reworked the RXQ computation as the RXQ assignment was not checking
        the maximum number of RXQ available, and was broken for PPv2.1.
      
      - As discussed in a previous fixes series, patches 9 to 15 rework the
        way blocks are set in reset in the PPv2 engine (plus related changes).
      
        There are four blocks we want to control the reset status: two MAC
        (GMAC and XLG MAC) and two PCS (MPCS and XPCS). The XLG MAC is used
        for 10G connexions and uses the MPCS or the XPCS depending on the mode
        used (10GKR / XAUI / RXAUI) and the GMAC is used for the other modes.
      
        The idea is to set all blocks in reset by default, and when not used,
        and to de-assert the reset only when a block is used. There are four
        cases to take in account:
      
        1. Boot time: all four blocks should be put in reset, as we do not
           know their initial state (configured by the firmware/bootloader).
      
        2. Link up: only the blocks used by a given mode should be put out of
           reset (eg. 10GKR uses the XLG MAC and the MPCS).
      
        3. Mode reconfiguration: some ports may support mode reconfiguration,
           and switching between the GMAC and the XLG MAC (or between the two
           PCS). All blocks should be put in reset, and only the one used
           should be put out of reset.
      
        4. Link down: all four blocks are put in reset.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      04c2632a
    • Antoine Tenart's avatar
      net: mvpp2: set the GMAC, XLG MAC, XPCS and MPCS in reset when a port is down · 1f69afce
      Antoine Tenart authored
      This patch adds calls in the stop() helper to ensure both MACs and
      both PCS blocks are set in reset when the user manually sets a port
      down. This is done so that we have the exact same block reset states at
      boot time and when a port is set down.
      Signed-off-by: default avatarAntoine Tenart <antoine.tenart@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1f69afce
    • Antoine Tenart's avatar
      net: mvpp2: set the XPCS and MPCS in reset when not used · 7409e66e
      Antoine Tenart authored
      This patch sets both the XPCS and MPCS blocks in reset when they aren't
      used. This is done both at boot time and when reconfiguring a port mode.
      The advantage now is that only the PCS used is set out of reset when the
      port is configured (10GKR uses the MCPS while RXAUI uses the XPCS).
      Signed-off-by: default avatarAntoine Tenart <antoine.tenart@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7409e66e