This commit removes an enum which is in ks_wlan.h
and it is not being used at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit reviews includes of ks_wlan.h header file.
It removes those which are not being used at all. It
also reorder remaining ones in alphabetical order.
The linux/module.h include file has been moved to the
correct file which is ks7010_sdio.c in order to be able
to compile the driver without problems.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit reviews really needed includes in ks_wlan_net.c
source file. It removes those which are not needed at all.
It also reorder the remaining ones in alphabetical order.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit refactors ks_wlan_set_wps_enable function to
improve readability handling the error first to avoid an
'else'.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit refactors ks_wlan_set_rx_gain function to
improve readability:
    - error condition is handling the error to avoid an 'else'
    - ternary operator is used to clean if-else block assignment.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit refactors ks_wlan_set_rx_gain function to
improve readability:
    - error condition is handling the error to avoid an 'else'
    - ternary operator is used to clean if-else block assignment.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit changes an if-else block used to just assign a
variable to use a ternary operator to do the same improving
readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit refactors ks_wlan_set_encode function to improve
readability. It just removes level indentation in some paths
as well as removes not needed conditions paths which was
checked before. Changes are as follows:

 - (dwrq->length > MAX_KEY_SIZE) check has been moved to the top.
 - extra check about (dwrq->length > 0) inside an if block where
   that was the condition to enter inside it has been removed.
 - (dwrq->flags & IW_ENCODE_NOKEY) check has been turned to avoid
   one level indentation.
 - extra check (index >= 0) && (index < 4) has been removed. In
   the top of the file invalid index values are being checked
   so it has no sense to check that again.
 - remove commented line.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes the local buffer zeros in ks_wlan_get_encode
function. It also refactors related conditions in order to fill
'extra' output parameter of the function. Originally this zeros
is just memset to zeros and only being used if drw->length is
truncated to zero because of priv->reg.wep_key[index].size is
greater than 16 chars. In those cases the final if statement is
just using zeros but it is using memcpy with a length of zero
bytes which has no sense. Instead of that just handle the good
case copying from the same source the number of bytes of
priv->reg.wep_key[index].size. If it is zero the final 'extra'
parameter won't be copied at all because the number of bytes to
copy will be zero. With this change the code gets simplified.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes an anonymous enumerator inside eap_packet
header file because it is not being used anymore.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes ieee802_1x_eapol_key struct because
it is not being used at all. It also removes definitions
related to some fields of the removed struct.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit groups some case statements because its behaviour is
just do nothing which is the same as the default. Clean 'break'
keyword in those which are affected.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit refactors code for hostif_sme_sleep_set function. This
function was using a switch-case block to handle only two states
where the action to do for them is the same. Just refactor a bit
to check for return condition at first and doing the common action
after in other case.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes 'break' from case block because the
code is just using the 'default' break for some cases and
this one can be included also there.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit change return value of ks_wlan_do_power_save function
from int to void. This function is just returning zero and return
value is not being checked also, so it is nonsense to return an
integer.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit replace current custom implementation of some circular
buffer head and tail logic in favour of the use of macros defined
in linux circ_buf.h header. Queue related inline function names
have been review also.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit replaces custom time calculations done in ks7010_rw_function
with msecs_to_jiffies() function which has the same behaviour.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit reviews and changes SDIO related read and write
functions parameter types to use the preferred u* kernel types.
Also length parameter which was defined as int has nonsense
because calls to this functions are called useing an unsigned
instead. Because of this length parameters have been changed
also into unsigned int.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit fixes remaining checkpatch warnings because of
the use of lines longer than 80 characters in ks7010_sdio
source file. After this clean, this file has no remaining
warnings around.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes a comment which has nonsense because
it is obvious what the code does just reading SET_NETDEV_DEV
declaration. This also fixes a checkpatch warning because a
line longer than 80 characters.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes '\' character from michael_block function.
It seems these two were not removed properly in the following
commit:
 - staging: ks7010: replace MichaelBlockFunction macro with
   inline function (c61cc2cc).
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes #if 1 directive from code to
improve readability. It is always true, so it makes
no sense to have it there.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes KS_WLAN_MEM_FLAG definition which is
hiding GFP_ATOMIC along the code. It is better to use directly
GFP_ATOMIC in kmalloc's because this it is easier to read.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit rewrites hif_align_size inline function to
improve readability. It also change parameters and return
type from int to size_t which is the correct and the one
which is being used when this function is called from
several points of the code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes KS_ATOM preprocessor conditional code from
hif_align_size because it is not defined anywhere.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit moves DEVICE_ALIGNMENT definition into the header ks_hostif.h
which is where it is being used. This is also defined always so just
remove nosense undef definitions also and clean some preprocessor
conditional directives in hif_align_size function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit indents properly some enumeration values to improve
code readability a bit.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit changes ETHER_HDR_SIZE definition which is a hardcoded
number using the size of the structure ether_hdr which is the one
for what this definition has been created. This improves readability
and makes clear the intention of this definition along the code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes GENERIC_INFO_ELEM and RSN_INFO_ELEM definitions
from eap_packet.h header file which are not being used at all.
These two are also defined in the ks_wlan_net.c source file as
GENERIC_INFO_ELEM_ID and RSN_INFO_ELEM_ID with the same values.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes EAPOL_VERSION define from eap_packet.h
header file because it is not being used anywhere.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes not used at all enum values from eap_packet.h
header file. This values are defined in the kernel ieee80211.h
header and the only one that is being used in ks_wlan_net.c source
which is WLAN_REASON_MIC_FAILURE is being used from this header.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

priv is being explicitly dereferenced when it is still null, when
jumping to goto label err_free_netdev, before it is properly
updated with a valid memory address.

Also, when this happens, memory allocated for netdev at line 854:
netdev = alloc_etherdev(sizeof(*priv)) is not being free'd before
return, hence there is a memory leak.

The current code looks a bit too complicated and can be replaced
by just directly freeing netdev before return.

Notice that card->priv = NULL isn't required because the next thing
we do to card is kfree(card).

Addresses-Coverity-ID: 1467844 ("Explicit null dereferenced")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ks7010_upload_firmware() is never called in atomic context.

The call chain ending up at ks7010_upload_firmware() is:
[1] ks7010_upload_firmware() <- ks7010_sdio_probe()

ks7010_sdio_probe() is set as ".probe" in struct sdio_driver.
This function is not called in atomic context.

Despite never getting called from atomic context, ks7010_upload_firmware()
calls mdelay() to busily wait.
This is not necessary and can be replaced with usleep_range() to
avoid busy waiting.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use kmemdup rather than duplicating its implementation.
Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit just fixes some checkpatch reported issues about
lines longer than 80 characters.

A new blank line has been added also to improve readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit extracts firmware copy process into a new function
ks7010_copy_firmware. Because rom_buf is only needed for this
process, memory request for it has been also moved to this new
function so the error handling label release_host_and_free has
been renamed to release_host into ks7010_upload_firmware original
function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit checks missing error code check when checking
if the firmware is running reading General Communication
Register A (GCR_A).

It also set ret to EBUSY if firmware is running before
copying it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit extract initial enqueue process into a new
ks7010_sme_enqueue_events function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit extract ks_wlan_private initialization process
into a new function ks7010_private_init to improve a bit
readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit extract sdio irq setup process into a new
function ks7010_sdio_setup_irqs to improve readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>