- 13 Aug, 2014 23 commits
-
-
Aneesh Kumar K.V authored
We would get wrong results in compiler recomputed old_pmd. Avoid that by using ACCESS_ONCE CC: <stable@vger.kernel.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Aneesh Kumar K.V authored
As per ISA, for 4k base page size we compare 14..65 bits of VA specified with the entry_VA in tlb. That implies we need to make sure we do a tlbie with all the possible 4k va we used to access the 16MB hugepage. With 64k base page size we compare 14..57 bits of VA. Hence we cannot ignore the lower 24 bits of va while tlbie .We also cannot tlb invalidate a 16MB entry with just one tlbie instruction because we don't track which va was used to instantiate the tlb entry. CC: <stable@vger.kernel.org> Signed-off-by:
-
Aneesh Kumar K.V authored
If we changed base page size of the segment, either via sub_page_protect or via remap_4k_pfn, we do a demote_segment which doesn't flush the hash table entries. We do a lazy hash page table flush for all mapped pages in the demoted segment. This happens when we handle hash page fault for these pages. We use _PAGE_COMBO bit along with _PAGE_HASHPTE to indicate whether a pte is backed by 4K hash pte. If we find _PAGE_COMBO not set on the pte, that implies that we could possibly have older 64K hash pte entries in the hash page table and we need to invalidate those entries. Use _PAGE_COMBO to determine the page size with which we should invalidate the hash table entries on unmap. CC: <stable@vger.kernel.org> Signed-off-by:
-
Aneesh Kumar K.V authored
If we changed base page size of the segment, either via sub_page_protect or via remap_4k_pfn, we do a demote_segment which doesn't flush the hash table entries. We do a lazy hash page table flush for all mapped pages in the demoted segment. This happens when we handle hash page fault for these pages. We use _PAGE_COMBO bit along with _PAGE_HASHPTE to indicate whether a pte is backed by 4K hash pte. If we find _PAGE_COMBO not set on the pte, that implies that we could possibly have older 64K hash pte entries in the hash page table and we need to invalidate those entries. Handle this correctly for 16M pages CC: <stable@vger.kernel.org> Signed-off-by:
-
Aneesh Kumar K.V authored
The segment identifier and segment size will remain the same in the loop, So we can compute it outside. We also change the hugepage_invalidate interface so that we can use it the later patch CC: <stable@vger.kernel.org> Signed-off-by:
-
Aneesh Kumar K.V authored
With hugepages, we store the hpte valid information in the pte page whose address is stored in the second half of the PMD. Use a write barrier to make sure clearing pmd busy bit and updating hpte valid info are ordered properly. CC: <stable@vger.kernel.org> Signed-off-by:
-
Nishanth Aravamudan authored
There is an issue currently where NUMA information is used on powerpc (and possibly ia64) before it has been read from the device-tree, which leads to large slab consumption with CONFIG_SLUB and memoryless nodes. NUMA powerpc non-boot CPU's cpu_to_node/cpu_to_mem is only accurate after start_secondary(), similar to ia64, which is invoked via smp_init(). Commit 6ee0578b ("workqueue: mark init_workqueues() as early_initcall()") made init_workqueues() be invoked via do_pre_smp_initcalls(), which is obviously before the secondary processors are online. Additionally, the following commits changed init_workqueues() to use cpu_to_node to determine the node to use for kthread_create_on_node: bce90380 ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]") f3f90ad4 ("workqueue: determine NUMA node of workers accourding to the allowed cpumask") Therefore, when init_workqueues() runs, it sees all CPUs as being on Node 0. On LPARs or KVM guests where Node 0 is memoryless, this leads to a high number of slab deactivations (http://www.spinics.net/lists/linux-mm/msg67489.html). Fix this by initializing the powerpc-specific CPU<->node/local memory node mapping as early as possible, which on powerpc is do_init_bootmem(). Currently that function initializes the mapping for the boot CPU, but we extend it to setup the mapping for all possible CPUs. Then, in smp_prepare_cpus(), we can correspondingly set the per-cpu values for all possible CPUs. That ensures that before the early_initcalls run (and really as early as possible), the per-cpu NUMA mapping is accurate. While testing memoryless nodes on PowerKVM guests with a fix to the workqueue logic to use cpu_to_mem() instead of cpu_to_node(), with a guest topology of: available: 2 nodes (0-1) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 node 1 size: 16336 MB node 1 free: 15329 MB node distances: node 0 1 0: 10 40 1: 40 10 the slab consumption decreases from Slab: 932416 kB SUnreclaim: 902336 kB to Slab: 395264 kB SUnreclaim: 359424 kB And we a corresponding increase in the slab efficiency from slab mem objs slabs used active active ------------------------------------------------------------ kmalloc-16384 337 MB 11.28% 100.00% task_struct 288 MB 9.93% 100.00% to slab mem objs slabs used active active ------------------------------------------------------------ kmalloc-16384 37 MB 100.00% 100.00% task_struct 31 MB 100.00% 100.00% Powerpc didn't support memoryless nodes until recently (64bb80d8 "powerpc/numa: Enable CONFIG_HAVE_MEMORYLESS_NODES" and 8c272261 "powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"). Those commits also helped improve memory consumption with these kind of environments. Signed-off-by:
Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by:
-
Himangi Saraogi authored
Free memory allocated using kmem_cache_zalloc using kmem_cache_free rather than kfree. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @@ expression x,E,c; @@ x = \(kmem_cache_alloc\|kmem_cache_zalloc\|kmem_cache_alloc_node\)(c,...) ... when != x = E when != &x ?-kfree(x) +kmem_cache_free(c,x) // </smpl> Signed-off-by:Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Thomas Falcon authored
A buffer returned by H_VTERM_PARTNER_INFO contains device information in big endian format, causing problems for little endian architectures. This patch ensures that they are in cpu endian. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Anton Blanchard authored
xmon only soft disables interrupts. This seems like a bad idea - we certainly don't want decrementer and PMU exceptions going off when we are debugging something inside xmon. This issue was uncovered when the hard lockup detector went off inside xmon. To ensure we wont get a spurious hard lockup warning, I also call touch_nmi_watchdog() when exiting xmon. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Nishanth Aravamudan authored
It appears that commits 7f06f21d ("powerpc/tm: Add checking to treclaim/trechkpt") and e4e38121 ("KVM: PPC: Book3S HV: Add transactional memory support") both added definitions of TEXASR_FS. Remove one of them. At the same time, fix the alignment of the remaining definition (should be tab-separated like the rest of the #defines). Signed-off-by:
-
Gavin Shan authored
Function remove_ddw() could be called in of_reconfig_notifier and we potentially remove the dynamic DMA window property, which invokes of_reconfig_notifier again. Eventually, it leads to the deadlock as following backtrace shows. The patch fixes the above issue by deferring releasing the dynamic DMA window property while releasing the device node. ============================================= [ INFO: possible recursive locking detected ] 3.16.0+ #428 Tainted: G W --------------------------------------------- drmgr/2273 is trying to acquire lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 but task is already holding lock: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((of_reconfig_chain).rwsem); lock((of_reconfig_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by drmgr/2273: #0: (sb_writers#4){.+.+.+}, at: [<c0000000001cbe70>] \ .vfs_write+0xb0/0x1f8 #1: ((of_reconfig_chain).rwsem){.+.+..}, at: [<c000000000091890>] \ .__blocking_notifier_call_chain+0x40/0x78 stack backtrace: CPU: 17 PID: 2273 Comm: drmgr Tainted: G W 3.16.0+ #428 Call Trace: [c0000000137e7000] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c0000000137e70b0] [c00000000083cd34] .dump_stack+0x7c/0x9c [c0000000137e7130] [c0000000000b8afc] .__lock_acquire+0x128c/0x1c68 [c0000000137e7280] [c0000000000b9a4c] .lock_acquire+0xe8/0x104 [c0000000137e7350] [c00000000083588c] .down_read+0x4c/0x90 [c0000000137e73e0] [c000000000091890] .__blocking_notifier_call_chain+0x40/0x78 [c0000000137e7490] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7520] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e75b0] [c000000000682a9c] .of_property_notify+0x4c/0x54 [c0000000137e7650] [c000000000682bf0] .of_remove_property+0x30/0xd4 [c0000000137e76f0] [c000000000052a44] .remove_ddw+0x144/0x168 [c0000000137e7790] [c000000000053204] .iommu_reconfig_notifier+0x30/0xe0 [c0000000137e7820] [c00000000009137c] .notifier_call_chain+0x6c/0xb4 [c0000000137e78c0] [c0000000000918ac] .__blocking_notifier_call_chain+0x5c/0x78 [c0000000137e7970] [c000000000091900] .blocking_notifier_call_chain+0x38/0x48 [c0000000137e7a00] [c000000000682a28] .of_reconfig_notify+0x34/0x5c [c0000000137e7a90] [c000000000682e14] .of_detach_node+0x44/0x1fc [c0000000137e7b40] [c0000000000518e4] .ofdt_write+0x3ac/0x688 [c0000000137e7c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c0000000137e7cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c0000000137e7d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c0000000137e7e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by:Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Gavin Shan authored
While running command "drmgr -c phb -r -s 'PHB 528'", following backtrace jumped out because the target device node isn't marked with OF_DETACHED by of_detach_node(), which caused by error returned from memory hotplug related reconfig notifier when disabling CONFIG_MEMORY_HOTREMOVE. The patch fixes it. ERROR: Bad of_node_put() on /pci@800000020000210/ethernet@0 CPU: 14 PID: 2252 Comm: drmgr Tainted: G W 3.16.0+ #427 Call Trace: [c000000012a776a0] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c000000012a77750] [c00000000083cd34] .dump_stack+0x7c/0x9c [c000000012a777d0] [c0000000006807c4] .of_node_release+0x58/0xe0 [c000000012a77860] [c00000000038a7d0] .kobject_release+0x174/0x1b8 [c000000012a77900] [c00000000038a884] .kobject_put+0x70/0x78 [c000000012a77980] [c000000000681680] .of_node_put+0x28/0x34 [c000000012a77a00] [c000000000681ea8] .__of_get_next_child+0x64/0x70 [c000000012a77a90] [c000000000682138] .of_find_node_by_path+0x1b8/0x20c [c000000012a77b40] [c000000000051840] .ofdt_write+0x308/0x688 [c000000012a77c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c000000012a77cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c000000012a77d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c000000012a77e30] [c00000000000a064] syscall_exit+0x0/0x98 Cc: stable@vger.kernel.org Signed-off-by:
-
Benjamin Herrenschmidt authored
Avoids this warning: arch/powerpc/boot/gunzip_util.c:118:9: warning: comparison of distinct pointer types lacks a cast Signed-off-by: -
Vasant Hegde authored
PowerNV platform is capable of capturing host memory region when system crashes (because of host/firmware). We have new OPAL API to register/ unregister memory region to be captured when system crashes. This patch adds support for new API. Also during boot time we register kernel log buffer and unregister before doing kexec. Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by:
-
Vasant Hegde authored
Platforms like IBM Power Systems supports service processor assisted dump. It provides interface to add memory region to be captured when system is crashed. During initialization/running we can add kernel memory region to be collected. Presently we don't have a way to get the log buffer base address and size. This patch adds support to return log buffer address and size. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Michael Ellerman authored
We have been a bit slack about updating the CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS masks. When we added POWER8, and also POWER8E we forgot to update the ALWAYS mask. And when we added POWER8_DD1 we forgot to update both the POSSIBLE and ALWAYS masks. Luckily this hasn't caused any actual bugs AFAICS. Failing to update the ALWAYS mask just forgoes a potential optimisation opportunity. Failing to update the POSSIBLE mask for POWER8_DD1 is also OK because it only removes a bit rather than adding any. Regardless they should all be in both masks so as to avoid any future bugs when the set of ALWAYS/POSSIBLE bits changes, or the masks themselves change. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Acked-by:
Michael Neuling <mikey@neuling.org> Acked-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Alistair Popple authored
This patch disables the branch target address CAM which under specific circumstances may cause the processor to skip execution of 1-4 instructions. This fixes IBM Erratum #47. Signed-off-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
-
Gavin Shan authored
When we take full hotplug to recover from EEH errors, PCI buses could be involved. For the case, the child devices of involved PCI buses can't be attached to IOMMU group properly, which is caused by commit 3f28c5af ("powerpc/powernv: Reduce multi-hit of iommu_add_device()"). When adding the PCI devices of the newly created PCI buses to the system, the IOMMU group is expected to be added in (C). (A) fails to bind the IOMMU group because bus->is_added is false. (B) fails because the device doesn't have binding IOMMU table yet. bus->is_added is set to true at end of (C) and pdev->is_added is set to true at (D). pcibios_add_pci_devices() pci_scan_bridge() pci_scan_child_bus() pci_scan_slot() pci_scan_single_device() pci_scan_device() pci_device_add() pcibios_add_device() A: Ignore device_add() B: Ignore pcibios_fixup_bus() pcibios_setup_bus_devices() pcibios_setup_device() C: Hit pcibios_finish_adding_to_bus() pci_bus_add_devices() pci_bus_add_device() D: Add device If the parent PCI bus isn't involved in hotplug, the IOMMU group is expected to be bound in (B). (A) should fail as the sysfs entries aren't populated. The patch fixes the issue by reverting commit 3f28c5af and remove WARN_ON() in iommu_add_device() to allow calling the function even the specified device already has associated IOMMU group. Cc: <stable@vger.kernel.org> # 3.16+ Reported-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by:
-
Michael Ellerman authored
Similar to the previous commit which described why we need to add a barrier to arch_spin_is_locked(), we have a similar problem with spin_unlock_wait(). We need a barrier on entry to ensure any spinlock we have previously taken is visibly locked prior to the load of lock->slock. It's also not clear if spin_unlock_wait() is intended to have ACQUIRE semantics. For now be conservative and add a barrier on exit to give it ACQUIRE semantics. Signed-off-by:
-
Michael Ellerman authored
The kernel defines the function spin_is_locked(), which can be used to check if a spinlock is currently locked. Using spin_is_locked() on a lock you don't hold is obviously racy. That is, even though you may observe that the lock is unlocked, it may become locked at any time. There is (at least) one exception to that, which is if two locks are used as a pair, and the holder of each checks the status of the other before doing any update. Assuming *A and *B are two locks, and *COUNTER is a shared non-atomic value: The first CPU does: spin_lock(*A) if spin_is_locked(*B) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*A) And the second CPU does: spin_lock(*B) if spin_is_locked(*A) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*B) Although this is a strange locking construct, it should work. It seems to be understood, but not documented, that spin_is_locked() is not a memory barrier, so in the examples above and below the caller inserts its own memory barrier before acting on the result of spin_is_locked(). For now we assume spin_is_locked() is implemented as below, and we break it out in our examples: bool spin_is_locked(*LOCK) { LOAD l = *LOCK return l.locked } Our intuition is that there should be no problem even if the two code sequences run simultaneously such as: CPU 0 CPU 1 ================================================== spin_lock(*A) spin_lock(*B) LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) If one CPU gets the lock before the other then it will do the update and the other CPU will back off: CPU 0 CPU 1 ================================================== spin_lock(*A) LOAD b = *B spin_lock(*B) if b.locked # false LOAD a = *A else if a.locked # true smp_mb() # nothing LOAD r1 = *COUNTER spin_unlock(*B) r1++ STORE *COUNTER = r1 spin_unlock(*A) However in reality spin_lock() itself is not indivisible. On powerpc we implement it as a load-and-reserve and store-conditional. Ignoring the retry logic for the lost reservation case, it boils down to: spin_lock(*LOCK) { LOAD l = *LOCK l.locked = true STORE *LOCK = l ACQUIRE_BARRIER } The ACQUIRE_BARRIER is required to give spin_lock() ACQUIRE semantics as defined in memory-barriers.txt: This acts as a one-way permeable barrier. It guarantees that all memory operations after the ACQUIRE operation will appear to happen after the ACQUIRE operation with respect to the other components of the system. On modern powerpc systems we use lwsync for ACQUIRE_BARRIER. lwsync is also know as "lightweight sync", or "sync 1". As described in Power ISA v2.07 section B.2.1.1, in this scenario the lwsync is not the barrier itself. It instead causes the LOAD of *LOCK to act as the barrier, preventing any loads or stores in the locked region from occurring prior to the load of *LOCK. Whether this behaviour is in accordance with the definition of ACQUIRE semantics in memory-barriers.txt is open to discussion, we may switch to a different barrier in future. What this means in practice is that the following can occur: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true LOAD b = *B LOAD a = *A STORE *A = a STORE *B = b if b.locked # false if a.locked # false else else smp_mb() smp_mb() LOAD r1 = *COUNTER LOAD r2 = *COUNTER r1++ r2++ STORE *COUNTER = r1 STORE *COUNTER = r2 # Lost update spin_unlock(*A) spin_unlock(*B) That is, the load of *B can occur prior to the store that makes *A visibly locked. And similarly for CPU 1. The result is both CPUs hold their lock and believe the other lock is unlocked. The easiest fix for this is to add a full memory barrier to the start of spin_is_locked(), so adding to our previous definition would give us: bool spin_is_locked(*LOCK) { smp_mb() LOAD l = *LOCK return l.locked } The new barrier orders the store to the lock we are locking vs the load of the other lock: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true STORE *A = a STORE *B = b smp_mb() smp_mb() LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) Although the above example is theoretical, there is code similar to this example in sem_lock() in ipc/sem.c. This commit in addition to the next commit appears to be a fix for crashes we are seeing in that code where we believe this race happens in practice. Signed-off-by: -
Guenter Roeck authored
Once again, we see arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:865: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:866: Error: attempt to move .org backwards arch/powerpc/kernel/exceptions-64s.S:890: Error: attempt to move .org backwards when compiling ppc:allmodconfig. This time the problem has been caused by to commit 0869b6fd ("powerpc/book3s: Add basic infrastructure to handle HMI in Linux"), which adds functions hmi_exception_early and hmi_exception_after_realmode into a critical (size-limited) code area, even though that does not appear to be necessary. Move those functions to a non-critical area of the file. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Scott Wood authored
__early_init_mmu() does some things that are really only needed by the boot cpu. On FSL booke, This includes calling memblock_enforce_memory_limit(), which is labelled __init. Secondary cpu init code can't be __init as that would break CPU hotplug. While it's probably a bug that memblock_enforce_memory_limit() isn't __init_memblock instead, there's no reason why we should be doing this stuff for secondary cpus in the first place. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
- 10 Aug, 2014 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platformLinus Torvalds authored
Pull chrome platform updates from Olof Johansson: "Updates to the Chromebook/box platform drivers: - a bugfix to pstore registration that makes it also work on non-Google systems - addition of new shipped Chromebooks (later models have more probing through ACPI so the need for these updates will be less over time). - A couple of minor coding style updates" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: platform/chrome: chromeos_laptop - Add a limit for deferred retries platform/chrome: Add support for the acer c720p touchscreen. platform/chrome: pstore: fix dmi table to match all chrome systems platform/chrome: coding style fixes platform/chrome: chromeos_laptop - Add Toshiba CB35 Touch platform/chrome: chromeos_laptop - Add Dell Chromebook 11 touch platform/chrome: chromeos_laptop - Add HP Chromebook 14 platform/chrome: chromeos_laptop - Add support for Acer C720 -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: - a short branch of OMAP fixes that we didn't merge before the window opened. - a small cleanup that sorts the rk3288 dts entries properly - a build fix due to a reference to a removed DT node on exynos * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: exynos5420: remove disp_pd ARM: EXYNOS: Fix suspend/resume sequences ARM: dts: Fix the sort ordering of EHCI and HSIC in rk3288.dtsi ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c ARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case. ARM: OMAP2+: clock: allow omap2_dpll_round_rate() to round to next-lowest rate
-
git://anongit.freedesktop.org/git/nouveau/linux-2.6Linus Torvalds authored
Pull nouveau drm updates from Ben Skeggs: "Apologies for not getting this done in time for Dave's drm-next merge window. As he mentioned, a pre-existing bug reared its head a lot more obviously after this lot of changes. It took quite a bit of time to track it down. In any case, Dave suggested I try my luck by sending directly to you this time. Overview: - more code for Tegra GK20A from NVIDIA - probing, reclockig - better fix for Kepler GPUs that have the graphics engine powered off on startup, method courtesy of info provided by NVIDIA - unhardcoding of a bunch of graphics engine setup on Fermi/Kepler/Maxwell, will hopefully solve some issues people have noticed on higher-end models - support for "Zero Bandwidth Clear" on Fermi/Kepler/Maxwell, needs userspace support in general, but some lucky apps will benefit automagically - reviewed/exposed the full object APIs to userspace (finally), gives it access to perfctrs, ZBC controls, various events. More to come in the future. - various other fixes" Acked-by:Dave Airlie <airlied@redhat.com> * 'linux-3.17' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (87 commits) drm/nouveau: expose the full object/event interfaces to userspace drm/nouveau: fix headless mode drm/nouveau: hide sysfs pstate file behind an option again drm/nv50/disp: shhh compiler drm/gf100-/gr: implement the proper SetShaderExceptions method drm/gf100-/gr: remove some broken ltc bashing, for now drm/gf100-/gr: unhardcode attribute cb config drm/gf100-/gr: fetch tpcs-per-ppc info on startup drm/gf100-/gr: unhardcode pagepool config drm/gf100-/gr: unhardcode bundle cb config drm/gf100-/gr: improve initial context patch list helpers drm/gf100-/gr: add support for zero bandwidth clear drm/nouveau/ltc: add zbc drivers drm/nouveau/ltc: s/ltcg/ltc/ + cleanup drm/nouveau: use ram info from nvif_device drm/nouveau/disp: implement nvif event sources for vblank/connector notifiers drm/nouveau/disp: allow user direct access to channel control registers drm/nouveau/disp: audit and version display classes drm/nouveau/disp: audit and version SCANOUTPOS method drm/nv50-/disp: audit and version PIOR_PWR method ...
-
Linus Torvalds authored
Merge tag 'trace-ipi-tracepoints' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull IPI tracepoints for ARM from Steven Rostedt: "Nicolas Pitre added generic tracepoints for tracing IPIs and updated the arm and arm64 architectures. It required some minor updates to the generic tracepoint system, so it had to wait for me to implement them" * tag 'trace-ipi-tracepoints' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ARM64: add IPI tracepoints ARM: add IPI tracepoints tracepoint: add generic tracepoint definitions for IPI tracing tracing: Do not do anything special with tracepoint_string when tracing is disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull trace file read iterator fixes from Steven Rostedt: "This contains a fix for two long standing bugs. Both of which are rarely ever hit, and requires the user to do something that users rarely do. It took a few special test cases to even trigger this bug, and one of them was just one test in the process of finishing up as another one started. Both bugs have to do with the ring buffer iterator rb_iter_peek(), but one is more indirect than the other. The fist bug fix is simply an increase in the safety net loop counter. The counter makes sure that the rb_iter_peek() only iterates the number of times we expect it can, and no more. Well, there was one way it could iterate one more than we expected, and that caused the ring buffer to shutdown with a nasty warning. The fix was simply to up that counter by one. The other bug has to be with rb_iter_reset() (called by rb_iter_peek()). This happens when a user reads both the trace_pipe and trace files. The trace_pipe is a consuming read and does not use the ring buffer iterator, but the trace file is not a consuming read and does use the ring buffer iterator. When the trace file is being read, if it detects that a consuming read occurred, it resets the iterator and starts over. But the reset code that does this (rb_iter_reset()), checks if the reader_page is linked to the ring buffer or not, and will look into the ring buffer itself if it is not. This is wrong, as it should always try to read the reader page first. Not to mention, the code that looked into the ring buffer did it wrong, and used the header_page "read" offset to start reading on that page. That offset is bogus for pages in the writable ring buffer, and was corrupting the iterator, and it would start returning bogus events" * tag 'trace-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Always reset iterator to reader page ring-buffer: Up rb_iter_peek() loop count to 3
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull namespace updates from Eric Biederman: "This is a bunch of small changes built against 3.16-rc6. The most significant change for users is the first patch which makes setns drmatically faster by removing unneded rcu handling. The next chunk of changes are so that "mount -o remount,.." will not allow the user namespace root to drop flags on a mount set by the system wide root. Aks this forces read-only mounts to stay read-only, no-dev mounts to stay no-dev, no-suid mounts to stay no-suid, no-exec mounts to stay no exec and it prevents unprivileged users from messing with a mounts atime settings. I have included my test case as the last patch in this series so people performing backports can verify this change works correctly. The next change fixes a bug in NFS that was discovered while auditing nsproxy users for the first optimization. Today you can oops the kernel by reading /proc/fs/nfsfs/{servers,volumes} if you are clever with pid namespaces. I rebased and fixed the build of the !CONFIG_NFS_FS case yesterday when a build bot caught my typo. Given that no one to my knowledge bases anything on my tree fixing the typo in place seems more responsible that requiring a typo-fix to be backported as well. The last change is a small semantic cleanup introducing /proc/thread-self and pointing /proc/mounts and /proc/net at it. This prevents several kinds of problemantic corner cases. It is a user-visible change so it has a minute chance of causing regressions so the change to /proc/mounts and /proc/net are individual one line commits that can be trivially reverted. Unfortunately I lost and could not find the email of the original reporter so he is not credited. From at least one perspective this change to /proc/net is a refgression fix to allow pthread /proc/net uses that were broken by the introduction of the network namespace" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: Point /proc/mounts at /proc/thread-self/mounts instead of /proc/self/mounts proc: Point /proc/net at /proc/thread-self/net instead of /proc/self/net proc: Implement /proc/thread-self to point at the directory of the current thread proc: Have net show up under /proc/<tgid>/task/<tid> NFS: Fix /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes mnt: Add tests for unprivileged remount cases that have found to be faulty mnt: Change the default remount atime from relatime to the existing value mnt: Correct permission checks in do_remount mnt: Move the test for MNT_LOCK_READONLY from change_mount_flags into do_remount mnt: Only change user settable mount flags in remount namespaces: Use task_lock and not rcu to protect nsproxy
-
- 09 Aug, 2014 11 commits
-
-
git://git.infradead.org/users/pcmoore/selinuxLinus Torvalds authored
Pull SElinux fixes from Paul Moore: "Two small patches to fix a couple of build warnings in SELinux and NetLabel. The patches are obvious enough that I don't think any additional explanation is necessary, but it basically boils down to the usual: I was stupid, and these patches fix some of the stupid. Both patches were posted earlier this week to the SELinux list, and that is where they sat as I didn't think there were noteworthy enough to go upstream at this point in time, but DaveM would rather see them upstream now so who am I to argue. As the patches are both very small" * 'stable-3.17' of git://git.infradead.org/users/pcmoore/selinux: selinux: remove unused variabled in the netport, netnode, and netif caches netlabel: fix the netlbl_catmap_setlong() dummy function
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "This includes a major rewrite of the NFSv4 state code, which has always depended on a single mutex. As an example, open creates are no longer serialized, fixing a performance regression on NFSv3->NFSv4 upgrades. Thanks to Jeff, Trond, and Benny, and to Christoph for review. Also some RDMA fixes from Chuck Lever and Steve Wise, and miscellaneous fixes from Kinglong Mee and others" * 'for-3.17' of git://linux-nfs.org/~bfields/linux: (167 commits) svcrdma: remove rdma_create_qp() failure recovery logic nfsd: add some comments to the nfsd4 object definitions nfsd: remove the client_mutex and the nfs4_lock/unlock_state wrappers nfsd: remove nfs4_lock_state: nfs4_state_shutdown_net nfsd: remove nfs4_lock_state: nfs4_laundromat nfsd: Remove nfs4_lock_state(): reclaim_complete() nfsd: Remove nfs4_lock_state(): setclientid, setclientid_confirm, renew nfsd: Remove nfs4_lock_state(): exchange_id, create/destroy_session() nfsd: Remove nfs4_lock_state(): nfsd4_open and nfsd4_open_confirm nfsd: Remove nfs4_lock_state(): nfsd4_delegreturn() nfsd: Remove nfs4_lock_state(): nfsd4_open_downgrade + nfsd4_close nfsd: Remove nfs4_lock_state(): nfsd4_lock/locku/lockt() nfsd: Remove nfs4_lock_state(): nfsd4_release_lockowner nfsd: Remove nfs4_lock_state(): nfsd4_test_stateid/nfsd4_free_stateid nfsd: Remove nfs4_lock_state(): nfs4_preprocess_stateid_op() nfsd: remove old fault injection infrastructure nfsd: add more granular locking to *_delegations fault injectors nfsd: add more granular locking to forget_openowners fault injector nfsd: add more granular locking to forget_locks fault injector nfsd: add a list_head arg to nfsd_foreach_client_lock ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS updates from Steve French: "The most visible change in this set is the additional of multi-credit support for SMB2/SMB3 which dramatically improves the large file i/o performance for these dialects and significantly increases the maximum i/o size used on the wire for SMB2/SMB3. Also reconnection behavior after network failure is improved" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (35 commits) Add worker function to set allocation size [CIFS] Fix incorrect hex vs. decimal in some debug print statements update CIFS TODO list Add Pavel to contributor list in cifs AUTHORS file Update cifs version CIFS: Fix STATUS_CANNOT_DELETE error mapping for SMB2 CIFS: Optimize readpages in a short read case on reconnects CIFS: Optimize cifs_user_read() in a short read case on reconnects CIFS: Improve indentation in cifs_user_read() CIFS: Fix possible buffer corruption in cifs_user_read() CIFS: Count got bytes in read_into_pages() CIFS: Use separate var for the number of bytes got in async read CIFS: Indicate reconnect with ECONNABORTED error code CIFS: Use multicredits for SMB 2.1/3 reads CIFS: Fix rsize usage for sync read CIFS: Fix rsize usage in user read CIFS: Separate page reading from user read CIFS: Fix rsize usage in readpages CIFS: Separate page search from readpages CIFS: Use multicredits for SMB 2.1/3 writes ...
-
Ben Skeggs authored
Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
No-one has yet had time to move this to debugfs as discussed during the last merge window. Until this happens, hide the option to make it clear it's not going to be here forever. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
We have another version of it implemented in SW, however, that version isn't serialised with normal PGRAPH operation and can possibly clobber the enables for another context. This is the same method that's implemented by the NVIDIA binary driver. Signed-off-by: -
Ben Skeggs authored
... and hope that the defaults are good enough. This was always supposed to be a read/modify/write thing anyway, so we're writing very wrong stuff for some boards already. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by:
-
