- 01 May, 2018 20 commits
-
-
Yixun Lan authored
We need to introduce a new compatible name for the Meson-AXG SoC in order to support the RMII 100M ethernet PHY, since the PRG_ETH0 register of the dwmac glue layer is changed from previous old SoC. Signed-off-by:
Yixun Lan <yixun.lan@amlogic.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Christian Brauner says: ==================== netns: uevent filtering This is the new approach to uevent filtering as discussed (see the threads in [1], [2], and [3]). It only contains *non-functional changes*. This series deals with with fixing up uevent filtering logic: - uevent filtering logic is simplified - locking time on uevent_sock_list is minimized - tagged and untagged kobjects are handled in separate codepaths - permissions for userspace are fixed for network device uevents in network namespaces owned by non-initial user namespaces Udev is now able to see those events correctly which it wasn't before. For example, moving a physical device into a network namespace not owned by the initial user namespaces before gave: root@xen1:~# udevadm --debug monitor -k calling: monitor monitor will print the received events for: KERNEL - the kernel uevent sender uid=65534, message ignored sender uid=65534, message ignored sender uid=65534, message ignored sender uid=65534, message ignored sender uid=65534, message ignored and now after the discussion and solution in [3] correctly gives: root@xen1:~# udevadm --debug monitor -k calling: monitor monitor will print the received events for: KERNEL - the kernel uevent KERNEL[625.301042] add /devices/pci0000:00/0000:00:02.0/0000:01:00.1/net/enp1s0f1 (net) KERNEL[625.301109] move /devices/pci0000:00/0000:00:02.0/0000:01:00.1/net/enp1s0f1 (net) KERNEL[625.301138] move /devices/pci0000:00/0000:00:02.0/0000:01:00.1/net/eth1 (net) KERNEL[655.333272] remove /devices/pci0000:00/0000:00:02.0/0000:01:00.1/net/eth1 (net) Thanks! Christian [1]: https://lkml.org/lkml/2018/4/4/739 [2]: https://lkml.org/lkml/2018/4/26/767 [3]: https://lkml.org/lkml/2018/4/26/738 ==================== Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Christian Brauner authored
commit 07e98962 ("kobject: Send hotplug events in all network namespaces") enabled sending hotplug events into all network namespaces back in 2010. Over time the set of uevents that get sent into all network namespaces has shrunk. We have now reached the point where hotplug events for all devices that carry a namespace tag are filtered according to that namespace. Specifically, they are filtered whenever the namespace tag of the kobject does not match the namespace tag of the netlink socket. Currently, only network devices carry namespace tags (i.e. network namespace tags). Hence, uevents for network devices only show up in the network namespace such devices are created in or moved to. However, any uevent for a kobject that does not have a namespace tag associated with it will not be filtered and we will broadcast it into all network namespaces. This behavior stopped making sense when user namespaces were introduced. This patch simplifies and fixes couple of things: - Split codepath for sending uevents by kobject namespace tags: 1. Untagged kobjects - uevent_net_broadcast_untagged(): Untagged kobjects will be broadcast into all uevent sockets recorded in uevent_sock_list, i.e. into all network namespacs owned by the intial user namespace. 2. Tagged kobjects - uevent_net_broadcast_tagged(): Tagged kobjects will only be broadcast into the network namespace they were tagged with. Handling of tagged kobjects in 2. does not cause any semantic changes. This is just splitting out the filtering logic that was handled by kobj_bcast_filter() before. Handling of untagged kobjects in 1. will cause a semantic change. The reasons why this is needed and ok have been discussed in [1]. Here is a short summary: - Userspace ignores uevents from network namespaces that are not owned by the intial user namespace: Uevents are filtered by userspace in a user namespace because the received uid != 0. Instead the uid associated with the event will be 65534 == "nobody" because the global root uid is not mapped. This means we can safely and without introducing regressions modify the kernel to not send uevents into all network namespaces whose owning user namespace is not the initial user namespace because we know that userspace will ignore the message because of the uid anyway. I have a) verified that is is true for every udev implementation out there b) that this behavior has been present in all udev implementations from the very beginning. - Thundering herd: Broadcasting uevents into all network namespaces introduces significant overhead. All processes that listen to uevents running in non-initial user namespaces will end up responding to uevents that will be meaningless to them. Mainly, because non-initial user namespaces cannot easily manage devices unless they have a privileged host-process helping them out. This means that there will be a thundering herd of activity when there shouldn't be any. - Removing needless overhead/Increasing performance: Currently, the uevent socket for each network namespace is added to the global variable uevent_sock_list. The list itself needs to be protected by a mutex. So everytime a uevent is generated the mutex is taken on the list. The mutex is held *from the creation of the uevent (memory allocation, string creation etc. until all uevent sockets have been handled*. This is aggravated by the fact that for each uevent socket that has listeners the mc_list must be walked as well which means we're talking O(n^2) here. Given that a standard Linux workload usually has quite a lot of network namespaces and - in the face of containers - a lot of user namespaces this quickly becomes a performance problem (see "Thundering herd" above). By just recording uevent sockets of network namespaces that are owned by the initial user namespace we significantly increase performance in this codepath. - Injecting uevents: There's a valid argument that containers might be interested in receiving device events especially if they are delegated to them by a privileged userspace process. One prime example are SR-IOV enabled devices that are explicitly designed to be handed of to other users such as VMs or containers. This use-case can now be correctly handled since commit 692ec06d ("netns: send uevent messages"). This commit introduced the ability to send uevents from userspace. As such we can let a sufficiently privileged (CAP_SYS_ADMIN in the owning user namespace of the network namespace of the netlink socket) userspace process make a decision what uevents should be sent. This removes the need to blindly broadcast uevents into all user namespaces and provides a performant and safe solution to this problem. - Filtering logic: This patch filters by *owning user namespace of the network namespace a given task resides in* and not by user namespace of the task per se. This means if the user namespace of a given task is unshared but the network namespace is kept and is owned by the initial user namespace a listener that is opening the uevent socket in that network namespace can still listen to uevents. - Fix permission for tagged kobjects: Network devices that are created or moved into a network namespace that is owned by a non-initial user namespace currently are send with INVALID_{G,U}ID in their credentials. This means that all current udev implementations in userspace will ignore the uevent they receive for them. This has lead to weird bugs whereby new devices showing up in such network namespaces were not recognized and did not get IPs assigned etc. This patch adjusts the permission to the appropriate {g,u}id in the respective user namespace. This way udevd is able to correctly handle such devices. - Simplify filtering logic: do_one_broadcast() already ensures that only listeners in mc_list receive uevents that have the same network namespace as the uevent socket itself. So the filtering logic in kobj_bcast_filter is not needed (see [3]). This patch therefore removes kobj_bcast_filter() and replaces netlink_broadcast_filtered() with the simpler netlink_broadcast() everywhere. [1]: https://lkml.org/lkml/2018/4/4/739 [2]: https://lkml.org/lkml/2018/4/26/767 [3]: https://lkml.org/lkml/2018/4/26/738Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
-
Christian Brauner authored
This patch adds alloc_uevent_skb() in preparation for follow up patches. Signed-off-by:
-
David S. Miller authored
Boris Pismenny says: ==================== TLS offload, netdev & MLX5 support The following series provides TLS TX inline crypto offload. v1->v2: - Added IS_ENABLED(CONFIG_TLS_DEVICE) and a STATIC_KEY for icsk_clean_acked - File license fix - Fix spelling, comment by DaveW - Move memory allocations out of tls_set_device_offload and other misc fixes, comments by Kiril. v2->v3: - Reversed xmas tree where needed and style fixes - Removed the need for skb_page_frag_refill, per Eric's comment - IPv6 dependency fixes v3->v4: - Remove "inline" from functions in C files - Make clean_acked_data_enabled a static variable and add enable/disable functions to control it. - Remove unnecessary variable initialization mentioned by ShannonN - Rebase over TLS RX - Refactor the tls_software_fallback to reduce the number of variables mentioned by KirilT v4->v5: - Add missing CONFIG_TLS_DEVICE v5->v6: - Move changes to the software implementation into a seperate patch - Fix some checkpatch warnings - GPL export the enable/disable clean_acked_data functions v6->v7: - Use the dst_entry to obtain the netdev in dev_get_by_index - Remove the IPv6 patch since it is redundent now v7->v8: - Fix a merge conflict in mlx5 header v8->v9: - Fix false -Wmaybe-uninitialized warning - Fix empty space in the end of new files v9->v10: - Remove default "n" in net/Kconfig This series adds a generic infrastructure to offload TLS crypto to a network devices. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmit the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Expected TCP SN is accessed without a lock, under the assumption that TCP doesn't transmit SKBs from different TX queue concurrently. If packets are rerouted to a different netdevice, then a software fallback routine handles encryption. Paper: https://www.netdevconf.org/1.2/papers/netdevconf-TLS.pdf ==================== Signed-off-by:
-
Boris Pismenny authored
Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Boris Pismenny authored
Signed-off-by:
-
Ilya Lesokhin authored
Add statistics for rare TLS related errors. Since the errors are rare we have a counter per netdev rather then per SQ. Signed-off-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
-
Ilya Lesokhin authored
Implement the TLS tx offload data path according to the requirements of the TLS generic NIC offload infrastructure. Special metadata ethertype is used to pass information to the hardware. Signed-off-by:
-
Ilya Lesokhin authored
Add NETIF_F_HW_TLS_TX capability and expose tlsdev_ops to work with the TLS generic NIC offload infrastructure. The NETIF_F_HW_TLS_TX capability will be added in the next patch. Signed-off-by:
-
Ilya Lesokhin authored
Add routines for manipulating TLS TX offload contexts. In Innova TLS, TLS contexts are added or deleted via a command message over the SBU connection. The HW then sends a response message over the same connection. Add implementation for Innova TLS (FPGA-based) hardware. These routines will be used by the TLS offload support in a later patch mlx5/accel is a middle acceleration layer to allow mlx5e and other ULPs to work directly with mlx5_core rather than Innova FPGA or other mlx5 acceleration providers. In the future, when IPSec/TLS or any other acceleration gets integrated into ConnectX chip, mlx5/accel layer will provide the integrated acceleration, rather than the Innova one. Signed-off-by:
-
Ilya Lesokhin authored
The defines are not IPSEC specific. Signed-off-by:
-
Ilya Lesokhin authored
This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by:
Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by:
-
Boris Pismenny authored
In TLS inline crypto, we can have one direction in software and another in hardware. Thus, we split the TLS configuration to separate structures for receive and transmit. Signed-off-by:
-
Ilya Lesokhin authored
This patch adds a netdev feature to configure TLS TX offloads. Signed-off-by:
-
Ilya Lesokhin authored
Add new netdev ops to add and delete tls context Signed-off-by:
-
Ilya Lesokhin authored
With socket dependent offloads we rely on the netdev to transform the transmitted packets before sending them to the wire. When a packet from an offloaded socket is rerouted to a different device we need to detect it and do the transformation in software. Signed-off-by:
-
Ilya Lesokhin authored
copy_skb_header is renamed to skb_copy_header and exported. Exposing this function give more flexibility in copying SKBs. skb_copy and skb_copy_expand do not give enough control over which parts are copied. Signed-off-by:
-
Ilya Lesokhin authored
Called when a TCP segment is acknowledged. Could be used by application protocols who hold additional metadata associated with the stream data. This is required by TLS device offload to release metadata associated with acknowledged TLS records. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-04-30 This series contains updates to i40e and i40evf only. Jia-Ju Bai replaces an instance of GFP_ATOMIC to GFP_KERNEL, since i40evf is not in atomic context when i40evf_add_vlan() is called. Jake cleans up function header comments to ensure that the function parameter comments actually match the function parameters. Fixed a possible overflow error in the PTP clock code. Fixed warnings regarding restricted __be32 type usage. Mariusz fixes the reading of the LLDP configuration, which moves from using relative values to calculating the absolute address. Jakub adds a check for 10G LR mode for i40e. Paweł fixes an issue, where changing the MTU would turn on TSO, GSO and GRO. Alex fixes a couple of issues with the UDP tunnel filter configuration. First being that the tunnels did not have mutual exclusion in place to prevent a race condition between a user request to add/remove a port and an update. The second issue was we were deleting filters that were not associated with the actual filter we wanted to delete. Harshitha ensures that the queue map sent by the VF is taken into account when enabling/disabling queues in the VF VSI. ==================== Signed-off-by:
-
- 30 Apr, 2018 20 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: SPAN: Support routes pointing at bridges Petr says: When mirroring to a gretap or ip6gretap netdevice, the route that directs the encapsulated packets can reference a bridge. In that case, in the software model, the packet is switched. Thus when offloading mirroring like that, take into consideration FDB, STP, PVID configured at the bridge, and whether that VLAN ID should be tagged on egress. Patch #1 introduces functions to get bridge PVID, VLAN flags and to look up an FDB entry. Patches #2 and #3 refactor some existing code and introduce a new accessor function. With patches #4 and #5 mlxsw calls mlxsw_sp_span_respin() on switchdev events as well. There is no impact yet, because bridge as an underlay device is still not allowed. That is implemented in patch #6, which uses the new interfaces to figure out on which one port the mirroring should be configured, and whether the mirrored packets should be VLAN-tagged and how. Changes from v2 to v3: - Rename the suite of bridge accessor function to br_vlan_get_pvid(), br_vlan_get_info() and br_fdb_find_port(). The _get bit is to avoid clashing with an existing static function. Changes from v1 to v2: - Change the suite of bridge accessor functions to br_vlan_pvid_rtnl(), br_vlan_info_rtnl(), br_fdb_find_port_rtnl(). ==================== Signed-off-by: -
Petr Machata authored
When handling mirroring to a gretap or ip6gretap netdevice in mlxsw, the underlay address (i.e. the remote address of the tunnel) may be routed to a bridge. In that case, look up the resolved neighbor Ethernet address in that bridge's FDB. Then configure the offload to direct the mirrored traffic to that port, possibly with tagging. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Petr Machata authored
Changes to switchdev artifact can make a SPAN entry offloadable or unoffloadable. To that end: - Listen to SWITCHDEV_FDB_*_TO_BRIDGE notifications in addition to the *_TO_DEVICE ones, to catch whatever activity is sent to the bridge (likely by mlxsw itself). On each FDB notification, respin SPAN to reconcile it with the FDB changes. - Also respin on switchdev port attribute changes (which currently covers changes to STP state of ports) and port object additions and removals. Signed-off-by:
-
Petr Machata authored
Since switchdev events can trigger SPAN respin, it is necessary that the data structures are available. Register SPAN first, with a commentary on what the dependencies are. Signed-off-by:
-
Petr Machata authored
Publish the existing function mlxsw_sp_bridge_port_find(), and add another service accessor mlxsw_sp_bridge_port_stp_state(). Publish both in a new file spectrum_switchdev.h. Signed-off-by:
-
Petr Machata authored
Instead of duplicating the decision regarding port forwarding state made by mlxsw_sp_port_vid_stp_set(), extract the decision-making into a new function and reuse. Signed-off-by:
-
Petr Machata authored
Add a couple new functions to allow querying FDB and vlan settings of a bridge. Signed-off-by:
-
Jacob Keller authored
Fix warnings regarding restricted __be32 type usage by strictly specifying the type of the ipv4 address being printed in the dev_err statement. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Harshitha Ramamurthy authored
The expectation of the ops VIRTCHNL_OP_ENABLE_QUEUES and VIRTCHNL_OP_DISABLE_QUEUES is that the queue map sent by the VF is taken into account when enabling/disabling queues in the VF VSI. This patch makes sure that happens. By breaking out the individual queue set up functions so that they can be called directly from the i40e_virtchnl_pf.c file, only the queues as specified by the queue bit map that accompanies the enable/disable queues ops will be handled. Signed-off-by:
Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by:
-
Jacob Keller authored
When operating at 1GbE, the base incval for the PTP clock is so large that multiplying it by numbers close to the max_adj can overflow the u64. Rather than attempting to limit the max_adj to a value small enough to avoid overflow, instead calculate the incvalue adjustment based on the 40GbE incvalue, and then multiply that by the scaling factor for the link speed. This sacrifices a small amount of precision in the adjustment but we avoid erratic behavior of the clock due to the overflow caused if ppb is very near the maximum adjustment. Signed-off-by:
-
Alexander Duyck authored
This fixes at least 2 issues I have found with the UDP tunnel filter configuration. The first issue is the fact that the tunnels didn't have any sort of mutual exclusion in place to prevent an update from racing with a user request to add/remove a port. As such you could request to add and remove a port before the port update code had a chance to respond which would result in a very confusing result. To address it I have added 2 changes. First I added the RTNL mutex wrapper around our updating of the pending, port, and filter_index bits. Second I added logic so that we cannot use a port that has a pending deletion since we need to free the space in hardware before we can allow software to reuse it. The second issue addressed is the fact that we were not recording the actual filter index provided to us by the admin queue. As a result we were deleting filters that were not associated with the actual filter we wanted to delete. To fix that I added a filter_index member to the UDP port tracking structure. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Paweł Jabłoński authored
This patch fixes the problem where each MTU change turns TSO, GSO and GRO on from off state. Now when TSO, GSO or GRO is turned off, MTU change does not turn them on. Signed-off-by:
Paweł Jabłoński <pawel.jablonski@intel.com> Tested-by:
-
Jakub Pawlak authored
The advertising 10G LR mode should be possible to set but in the function i40e_set_link_ksettings() check for this is missed. This patch adds check for 10000baseLR_Full flag for 10G modes. Signed-off-by:
Jakub Pawlak <jakub.pawlak@intel.com> Tested-by:
-
Ahmed Abdelsalam authored
The seg6_make_flowlabel() is used by seg6_do_srh_encap() to compute the flowlabel from a given skb. It relies on skb_get_hash() which eventually calls __skb_flow_dissect() to extract the flow_keys struct values from the skb. In case of IPv4 traffic, calling seg6_make_flowlabel() after skb_push(), skb_reset_network_header(), and skb_mac_header_rebuild() will results in flow_keys struct of all key values set to zero. This patch calls seg6_make_flowlabel() before resetting the headers of skb to get the right key values. Extracted Key values are based on the type inner packet as follows: 1) IPv6 traffic: src_IP, dst_IP, L4 proto, and flowlabel of inner packet. 2) IPv4 traffic: src_IP, dst_IP, L4 proto, src_port, and dst_port 3) L2 traffic: depends on what kind of traffic carried into the L2 frame. IPv6 and IPv4 traffic works as discussed 1) and 2) Here a hex_dump of struct flow_keys for IPv4 and IPv6 traffic 10.100.1.100: 47302 > 30.0.0.2: 5001 00000000: 14 00 02 00 00 00 00 00 08 00 11 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 13 89 b8 c6 1e 00 00 02 00000020: 0a 64 01 64 fc00:a1:a > b2::2 00000000: 28 00 03 00 00 00 00 00 86 dd 11 00 99 f9 02 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 b2 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 02 fc 00 00 a1 00000030: 00 00 00 00 00 00 00 00 00 00 00 0a Signed-off-by:
Ahmed Abdelsalam <amsalam20@gmail.com> Signed-off-by:
-
Mariusz Stachura authored
Previous method for reading LLDP config was based on hard-coded offsets. It happened to work, because of structured architecture of the NVM memory. In the new approach, known as FLAT, we need to calculate the absolute address, instead of using relative values. Needed defines for memory location were added. Signed-off-by:
Mariusz Stachura <mariusz.stachura@intel.com> Tested-by:
-
Jacob Keller authored
Recent versions of the Linux kernel now warn about incorrect parameter definitions for function comments. Fix up several function comments to correctly reflect the current function arguments. This cleans up the warnings and helps ensure our documentation is accurate. Signed-off-by:
-
YueHaibing authored
use helper __skb_put_zero to replace the pattern of __skb_put() && memset() Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
William Tu authored
Currently the truncated bit is set only when the mirrored packet is larger than mtu. For certain cases, the packet might already been truncated before sending to the erspan tunnel. In this case, the patch detect whether the IP header's total length is larger than the actual skb->len. If true, this indicated that the mirrored packet is truncated and set the erspan truncate bit. I tested the patch using bpf_skb_change_tail helper function to shrink the packet size and send to erspan tunnel. Reported-by:
Xiaoyan Jin <xiaoyanj@vmware.com> Signed-off-by:
William Tu <u9012063@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
i40evf_add_vlan() is never called in atomic context. i40evf_add_vlan() is only called by i40evf_vlan_rx_add_vid(), which is only set as ".ndo_vlan_rx_add_vid" in struct net_device_ops. ".ndo_vlan_rx_add_vid" is not called in atomic context. Despite never getting called from atomic context, i40evf_add_vlan() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Tested-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: further improvements w/o functional change This series aims at further improving and simplifying the code w/o any intended functional changes. Series was tested on: RTL8169sb, RTL8168d, RTL8168e-vl ==================== Signed-off-by:
-
