- 04 Apr, 2009 32 commits
-
-
Andy Adamson authored
Also, use client minorversion to generate supported attrs Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
_nfsd4_verify currently skips 3 words from the encoded buffer begining. With support for 3-word attr bitmaps in nfsd41, nfsd4_encode_fattr may encode 1, 2, or 3 words, and not always 2 as it used to be, hence we need to find out where to skip using the encoded bitmap length. Note: This patch may be applied over pre-nfsd41 nfsd. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
In preparation for EXCLUSIVE4_1 Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Marc Eshel authored
Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
Support enabling and disabling nfsv4.1 via /proc/fs/nfsd/versions by writing the strings "+4.1" or "-4.1" correspondingly. Use user mode nfs-utils (rpc.nfsd option) to enable. This will allow us to get rid of CONFIG_NFSD_V4_1 [nfsd41: disable support for minorversion by default] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Separate the access bits from the want bits and enable __set_bit to work correctly with st_access_bmap. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
For nfs41, the open share flags are used also for delegation "wants" and "signals". Check that they are valid. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Extract the clientid from sessionid to set the op_clientid on open. Verify that the clid for other stateful ops is zero for minorversion != 0 Do all other checks for stateful ops without sessions. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Andy Adamson <andros@netapp.com> [fixed whitespace indent] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41 remove sl_session from nfsd4_open] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Calculate the space the compound response has taken after encoding the current operation. pad: add on 8 bytes for the next operation's op_code and status so that there is room to cache a failure on the next operation. Compare this length to the session se_fmaxresp_cached and return nfserr_rep_too_big_to_cache if the length is too large. Our se_fmaxresp_cached will always be a multiple of PAGE_SIZE, and so will be at least a page and will therefore hold the xdr_buf head. Signed-off-by: Andy Adamson <andros@netapp.com> [nfsd41: non-page DRC for solo sequence responses] [fixed nfsd4_check_drc_limit cosmetics] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: use cstate session in nfsd4_check_drc_limit] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
When sessions are used, stateful operation sequenceid and stateid handling are not used. When sessions are used, on the first open set the seqid to 1, mark state confirmed and skip seqid processing. When sessionas are used the stateid generation number is ignored when it is zero whereas without sessions bad_stateid or stale stateid is returned. Add flags to propagate session use to all stateful ops and down to check_stateid_generation. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Andy Adamson <andros@netapp.com> [nfsd4_has_session should return a boolean, not u32] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: pass nfsd4_compoundres * to nfsd4_process_open1] [nfsd41: calculate HAS_SESSION in nfs4_preprocess_stateid_op] [nfsd41: calculate HAS_SESSION in nfs4_preprocess_seqid_op] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
Currently we only use cstate->current_fh, will also be used by nfsd41 code. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
Implement the destory_session operation confoming to http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26 [use sessionid_lock spin lock] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
A session inactivity time compound (lease renewal) or a compound where the sequence operation has sa_cachethis set to FALSE do not require any pages to be held in the v4.1 DRC. This is because struct nfsd4_slot is already caching the session information. Add logic to the nfs41 server to not cache response pages for solo sequence responses. Return nfserr_replay_uncached_rep on the operation following the sequence operation when sa_cachethis is FALSE. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: use cstate session in nfsd4_replay_cache_entry] [nfsd41: rename nfsd4_no_page_in_cache] [nfsd41 rename nfsd4_enc_no_page_replay] [nfsd41 nfsd4_is_solo_sequence] [nfsd41 change nfsd4_not_cached return] Signed-off-by: Andy Adamson <andros@netapp.com> [changed return type to bool] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41 drop parens in nfsd4_is_solo_sequence call] Signed-off-by: Andy Adamson <andros@netapp.com> [changed "== 0" to "!"] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Replace the nfs4_client cl_seqid field with a single struct nfs41_slot used for the create session replay cache. The CREATE_SESSION slot sets the sl_session pointer to NULL. Otherwise, the slot and it's replay cache are used just like the session slots. Fix unconfirmed create_session replay response by initializing the create_session slot sequence id to 0. A future patch will set the CREATE_SESSION cache when a SEQUENCE operation preceeds the CREATE_SESSION operation. This compound is currently only cached in the session slot table. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: use bool inuse for slot state] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: revert portion of nfsd4_set_cache_entry] Signed-off-by: Andy Adamson <andros@netpp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Implement the create_session operation confoming to http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26 Look up the client id (generated by the server on exchange_id, given by the client on create_session). If neither a confirmed or unconfirmed client is found then the client id is stale If a confirmed cilent is found (i.e. we already received create_session for it) then compare the sequence id to determine if it's a replay or possibly a mis-ordered rpc. If the seqid is in order, update the confirmed client seqid and procedd with updating the session parameters. If an unconfirmed client_id is found then verify the creds and seqid. If both match move the client id to confirmed state and proceed with processing the create_session. Currently, we do not support persistent sessions, and RDMA. alloc_init_session generates a new sessionid and creates a session structure. NFSD_PAGES_PER_SLOT is used for the max response cached calculation, and for the counting of DRC pages using the hard limits set in struct srv_serv. A note on NFSD_PAGES_PER_SLOT: Other patches in this series allow for NFSD_PAGES_PER_SLOT + 1 pages to be cached in a DRC slot when the response size is less than NFSD_PAGES_PER_SLOT * PAGE_SIZE but xdr_buf pages are used. e.g. a READDIR operation will encode a small amount of data in the xdr_buf head, and then the READDIR in the xdr_buf pages. So, the hard limit calculation use of pages by a session is underestimated by the number of cached operations using the xdr_buf pages. Yet another patch caches no pages for the solo sequence operation, or any compound where cache_this is False. So the hard limit calculation use of pages by a session is overestimated by the number of these operations in the cache. TODO: improve resource pre-allocation and negotiate session parameters accordingly. Respect and possibly adjust backchannel attributes. Signed-off-by: Marc Eshel <eshel@almaden.ibm.com> Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com> [nfsd41: remove headerpadsz from channel attributes] Our client and server only support a headerpadsz of 0. [nfsd41: use DRC limits in fore channel init] [nfsd41: do not change CREATE_SESSION back channel attrs] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [use sessionid_lock spin lock] [nfsd41: use bool inuse for slot state] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41 remove sl_session from alloc_init_session] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [simplify nfsd4_encode_create_session error handling] [nfsd41: fix comment style in init_forechannel_attrs] [nfsd41: allocate struct nfsd4_session and slot table in one piece] [nfsd41: no need to INIT_LIST_HEAD in alloc_init_session just prior to list_add] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Replay a request in nfsd4_sequence. Add a minorversion to struct nfsd4_compound_state. Pass the current slot to nfs4svc_encode_compound res via struct nfsd4_compoundres to set an NFSv4.1 DRC entry. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: use bool inuse for slot state] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: use cstate session in nfs4svc_encode_compoundres] [nfsd41 replace nfsd4_set_cache_entry] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Use no more than 1/128th of the number of free pages at nfsd startup for the v4.1 DRC. This is an arbitrary default which should probably end up under the control of an administrator. Signed-off-by: Andy Adamson <andros@netapp.com> [moved added fields in struct svc_serv under CONFIG_NFSD_V4_1] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [fix set_max_drc calculation of sv_drc_max_pages] [moved NFSD_DRC_SIZE_SHIFT's declaration up in header file] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Cache all the result pages, including the rpc header in rq_respages[0], for a request in the slot table cache entry. Cache the statp pointer from nfsd_dispatch which points into rq_respages[0] just past the rpc header. When setting a cache entry, calculate and save the length of the nfs data minus the rpc header for rq_respages[0]. When replaying a cache entry, replace the cached rpc header with the replayed request rpc result header, unless there is not enough room in the cached results first page. In that case, use the cached rpc header. The sessions fore channel maxresponse size cached is set to NFSD_PAGES_PER_SLOT * PAGE_SIZE. For compounds we are cacheing with operations such as READDIR that use the xdr_buf->pages to hold data, we choose to cache the extra page of data rather than copying data from xdr_buf->pages into the xdr_buf->head page. [nfsd41: limit cache to maxresponsesize_cached] [nfsd41: mv nfsd4_set_statp under CONFIG_NFSD_V4_1] [nfsd41: rename nfsd4_move_pages] [nfsd41: rename page_no variable] [nfsd41: rename nfsd4_set_cache_entry] [nfsd41: fix nfsd41_copy_replay_data comment] [nfsd41: add to nfsd4_set_cache_entry] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Signed-off-by: Andy Adamson<andros@netapp.com> [nfsd41: do not verify nfserr_sequence_pos for minorversion 0] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
Implement the sequence operation conforming to http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-26 Check for stale clientid (as derived from the sessionid). Enforce slotid range and exactly-once semantics using the slotid and seqid. If everything went well renew the client lease and mark the slot INPROGRESS. Add a struct nfsd4_slot pointer to struct nfsd4_compound_state. To be used for sessions DRC replay. [nfsd41: rename sequence catchthis to cachethis] Signed-off-by: Andy Adamson<andros@netapp.com> [pulled some code to set cstate->slot from "nfsd DRC logic"] [use sessionid_lock spin lock] [nfsd41: use bool inuse for slot state] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd: add a struct nfsd4_slot pointer to struct nfsd4_compound_state] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: add nfsd4_session pointer to nfsd4_compound_state] [nfsd41: set cstate session] [nfsd41: use cstate session in nfsd4_sequence] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [simplify nfsd4_encode_sequence error handling] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
We need to distinguish between client names provided by NFSv4.0 clients SETCLIENTID and those provided by NFSv4.1 via EXCHANGE_ID when looking up the clientid by string. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Andy Adamson <andros@netapp.com> [nfsd41: use boolean values for use_exchange_id argument] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: simplify match_clientid_establishment logic] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Implement the exchange_id operation confoming to http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-28 Based on the client provided name, hash a client id. If a confirmed one is found, compare the op's creds and verifier. If the creds match and the verifier is different then expire the old client (client re-incarnated), otherwise, if both match, assume it's a replay and ignore it. If an unconfirmed client is found, then copy the new creds and verifer if need update, otherwise assume replay. The client is moved to a confirmed state on create_session. In the nfs41 branch set the exchange_id flags to EXCHGID4_FLAG_USE_NON_PNFS | EXCHGID4_FLAG_SUPP_MOVED_REFER (pNFS is not supported, Referrals are supported, Migration is not.). Address various scenarios from section 18.35 of the spec: 1. Check for EXCHGID4_FLAG_UPD_CONFIRMED_REC_A and set EXCHGID4_FLAG_CONFIRMED_R as appropriate. 2. Return error codes per 18.35.4 scenarios. 3. Update client records or generate new client ids depending on scenario. Note: 18.35.4 case 3 probably still needs revisiting. The handling seems not quite right. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Andy Adamosn <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: use utsname for major_id (and copy to server_scope)] [nfsd41: fix handling of various exchange id scenarios] Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: reverse use of EXCHGID4_INVAL_FLAG_MASK_A] [simplify nfsd4_encode_exchange_id error handling] [nfsd41: embed an xdr_netobj in nfsd4_exchange_id] [nfsd41: return nfserr_serverfault for spa_how == SP4_MACH_CRED] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
Define nfsd41_dec_ops vector and add it to nfsd4_minorversion for minorversion 1. Note: nfsd4_enc_ops vector is shared for v4.0 and v4.1 since we don't need to filter out obsolete ops as this is done in the decoding phase. exchange_id, create_session, destroy_session, and sequence ops are implemented as stubs returning nfserr_opnotsupp at this stage. [was nfsd41: xdr stubs] [get rid of CONFIG_NFSD_V4_1] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Marc Eshel authored
Simple sessionid hashing using its monotonically increasing sequence number. Locking considerations: sessionid_hashtbl access is controlled by the sessionid_lock spin lock. It must be taken for insert, delete, and lookup. nfsd4_sequence looks up the session id and if the session is found, it calls nfsd4_get_session (still under the sessionid_lock). nfsd4_destroy_session calls nfsd4_put_session after unhashing it, so when the session's kref reaches zero it's going to get freed. Signed-off-by: Benny Halevy <bhalevy@panasas.com> [we don't use a prime for sessionid hash table size] [use sessionid_lock spin lock] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Marc Eshel authored
Signed-off-by: Benny Halevy <bhalevy@panasas.com> [add CONFIG_NFSD_V4_1 to fix v4.0 regression bug] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Marc Eshel authored
[get rid of CONFIG_NFSD_V4_1] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
This patch provides basic data structures representing the nfs41 sessions and slots, plus helpers for keeping a reference count on the session and freeing it. Note that our server only support a headerpadsz of 0 and it ignores backchannel attributes at the moment. Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: remove headerpadsz from channel attributes] [nfsd41: embed nfsd4_channel in nfsd4_session] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: use bool inuse for slot state] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41 remove sl_session from nfsd4_slot] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Marc Eshel authored
Define all error code present in http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-29. Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: clean up error code definitions] [nfsd41: change NFSERR_REPLAY_ME] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
Define all NFSv4.1 common operation and error code constants. Note that some of the definitions are used by both the nfs41 client and the server code. This patch is duplicated in the nfs41 and nfsd41 sessions patchset. Signed-off-by: Andy Adamson<andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: add exchange id flags] Signed-off-by: Mike Sager <sager@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [removed server-only hunk changing NFSERR_REPLAY_ME] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: add SEQ4_XX to nfs41-common-protocol] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: generic error code update] [nfs41: reverse EXCHGID4_INVAL_FLAG_MASK_{A,R}] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
On an NFSv4.1 server cache miss that causes an upcall, NFS4ERR_DELAY will be returned. It is up to the NFSv4.1 client to resend only the operations that have not been processed. Initialize rq_usedeferral to 1 in svc_process(). It sill be turned off in nfsd4_proc_compound() only when NFSv4.1 Sessions are used. Note: this isn't an adequate solution on its own. It's acceptable as a way to get some minimal 4.1 up and working, but we're going to have to find a way to avoid returning DELAY in all common cases before 4.1 can really be considered ready. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: reverse rq_nodeferral negative logic] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: initialize rq_usedeferral] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 30 Mar, 2009 1 commit
-
-
Benny Halevy authored
There's no need for it. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 29 Mar, 2009 1 commit
-
-
Andy Adamson authored
Remove the allocation of struct nfsd4_compound_state. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 27 Mar, 2009 3 commits
-
-
Greg Banks authored
Fix a build warning about leaking CONFIG_NFSD to userspace. The nfsd_stats data structure does not need to be available to userspace; no kernel interface uses it. So move it inside #ifdef __KERNEL__ and the warning goes away. Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Greg Banks authored
Document the format and semantics of the /proc/fs/nfsd/pool_stats file. Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
ideawu authored
There is no need to set rqstp->rq_server to serv, while serv is initialized as rqstp->rq_server at previous line. And between these two lines, there is no change to rqstp->rq_server. Signed-off-by: ideawu <ideawu@163.com> Reviewed-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 18 Mar, 2009 3 commits
-
-
Chuck Lever authored
Clean up: Enable the use of const arguments in higher level svc_ APIs by adding const to the arguments of the helper functions in svc_xprt.h Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Sachin S. Prabhu authored
There is an inconsistency seen in the behaviour of nfs compared to other local filesystems on linux when changing owner or group of a directory. If the directory has SUID/SGID flags set, on changing owner or group on the directory, the flags are stripped off on nfs. These flags are maintained on other filesystems such as ext3. To reproduce on a nfs share or local filesystem, run the following commands mkdir test; chmod +s+g test; chown user1 test; ls -ld test On the nfs share, the flags are stripped and the output seen is drwxr-xr-x 2 user1 root 4096 Feb 23 2009 test On other local filesystems(ex: ext3), the flags are not stripped and the output seen is drwsr-sr-x 2 user1 root 4096 Feb 23 13:57 test chown_common() called from sys_chown() will only strip the flags if the inode is not a directory. static int chown_common(struct dentry * dentry, uid_t user, gid_t group) { .. if (!S_ISDIR(inode->i_mode)) newattrs.ia_valid |= ATTR_KILL_SUID | ATTR_KILL_SGID | ATTR_KILL_PRIV; .. } See: http://www.opengroup.org/onlinepubs/7990989775/xsh/chown.html "If the path argument refers to a regular file, the set-user-ID (S_ISUID) and set-group-ID (S_ISGID) bits of the file mode are cleared upon successful return from chown(), unless the call is made by a process with appropriate privileges, in which case it is implementation-dependent whether these bits are altered. If chown() is successfully invoked on a file that is not a regular file, these bits may be cleared. These bits are defined in <sys/stat.h>." The behaviour as it stands does not appear to violate POSIX. However the actions performed are inconsistent when comparing ext3 and nfs. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Olga Kornievskaia authored
Allow the NFSv4 server to make use of TCP autotuning behaviour, which was previously disabled by setting the sk_userlocks variable. Set the receive buffers to be big enough to receive the whole RPC request, and set this for the listening socket, not the accept socket. Remove the code that readjusts the receive/send buffer sizes for the accepted socket. Previously this code was used to influence the TCP window management behaviour, which is no longer needed when autotuning is enabled. This can improve IO bandwidth on networks with high bandwidth-delay products, where a large tcp window is required. It also simplifies performance tuning, since getting adequate tcp buffers previously required increasing the number of nfsd threads. Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu> Cc: Jim Rees <rees@umich.edu> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-