This patch adds a Kconfig option and Makefile support for building the
9pfs Xen driver.

CC: groug@kaod.org
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Upon receiving a notification from the backend, schedule the
p9_xen_response work_struct. p9_xen_response checks if any responses are
available, if so, it reads them one by one, calling p9_client_cb to send
them up to the 9p layer (p9_client_cb completes the request). Handle the
ring following the Xen 9pfs specification.

CC: groug@kaod.org
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Implement struct p9_trans_module create and close functions by looking
at the available Xen 9pfs frontend-backend connections. We don't expect
many frontend-backend connections, thus walking a list is OK.

Send requests to the backend by copying each request to one of the
available rings (each frontend-backend connection comes with multiple
rings). Handle the ring and notifications following the 9pfs
specification. If there are not enough free bytes on the ring for the
request, wait on the wait_queue: the backend will send a notification
after consuming more requests.

CC: groug@kaod.org
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Implement functions to handle the xenbus handshake. Upon connection,
allocate the rings according to the protocol specification.

Initialize a work_struct and a wait_queue. The work_struct will be used
to schedule work upon receiving an event channel notification from the
backend. The wait_queue will be used to wait when the ring is full and
we need to send a new request.

CC: groug@kaod.org
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Introduce the Xen 9pfs transport driver: add struct xenbus_driver to
register as a xenbus driver and add struct p9_trans_module to register
as v9fs driver.

All functions are empty stubs for now.

CC: groug@kaod.org
CC: jgross@suse.com
CC: Eric Van Hensbergen <ericvh@gmail.com>
CC: Ron Minnich <rminnich@sandia.gov>
CC: Latchesar Ionkov <lucho@ionkov.net>
CC: v9fs-developer@lists.sourceforge.net
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

It uses the new ring.h macros to declare rings and interfaces.

CC: konrad.wilk@oracle.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: groug@kaod.org
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Sync the ring.h file with upstream Xen, to introduce the new ring macros.
They will be used by the Xen transport for 9pfs.

CC: konrad.wilk@oracle.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: groug@kaod.org
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

xen_call_function_interrupt() isn't used in smp_pv.c. Remove it.
Signed-off-by: Juergen Gross <jgross@suse.com>

After code split between PV and HVM some functions in xen_smp_ops have
xen_pv_ prefix and some only xen_ which makes them look like they're
common for both PV and HVM while they're not. Rename all the rest to
have xen_pv_ prefix.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Now everything is in place and we can move PV-only code under
CONFIG_XEN_PV. CONFIG_XEN_PV_SMP is created to support the change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

xen_create_contiguous_region()/xen_create_contiguous_region() are PV-only,
they both contain xen_feature(XENFEAT_auto_translated_physmap) check and
bail in the very beginning.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Balloon driver uses several PV-only concepts (xen_start_info,
xen_extra_mem,..) and it seems the simpliest solution to make HVM-only
build happy is to decorate these parts with #ifdefs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

__pfn_to_mfn() is only used from PV code (mmu_pv.c, p2m.c) and from
page.h where all functions calling it check for
xen_feature(XENFEAT_auto_translated_physmap) first so we can replace
it with any stub to make build happy.

set_foreign_p2m_mapping()/clear_foreign_p2m_mapping() are used from
grant-table.c but only if !xen_feature(XENFEAT_auto_translated_physmap).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

startup_xen references PV-only code, decorate it with #ifdef CONFIG_XEN_PV
to make PV-free builds possible.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

xen_pmu_init/finish() functions are used in suspend.c and
enlighten.c, add stubs for now.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Slit the code in suspend.c into suspend_pv.c and suspend_hvm.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Basically, mmu.c is renamed to mmu_pv.c and some code moved out to common
mmu.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Move PVHVM related code to mmu_hvm.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Basically, smp.c is renamed to smp_pv.c and some code moved out to common
smp.c. struct xen_common_irq delcaration ended up in smp.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Move PVHVM related code to smp_hvm.c. Drop 'static' qualifier from
xen_smp_send_reschedule(), xen_smp_send_call_function_ipi(),
xen_smp_send_call_function_single_ipi(), these functions will be moved to
common smp code when smp_pv.c is split.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Split xen_cpu_die() into xen_pv_cpu_die() and xen_hvm_cpu_die() to support
further splitting of smp.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Split xen_smp_prepare_boot_cpu() into xen_pv_smp_prepare_boot_cpu() and
xen_hvm_smp_prepare_boot_cpu() to support further splitting of smp.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

xen_smp_intr_init() and xen_smp_intr_free() have PV-specific code and as
a praparatory change to splitting smp.c we need to split these fucntions.
Create xen_smp_intr_init_pv()/xen_smp_intr_free_pv().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Basically, enlighten.c is renamed to enlighten_pv.c and some code moved
out to common enlighten.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Move PVHVM related code to enlighten_hvm.c. Three functions:
xen_cpuhp_setup(), xen_reboot(), xen_emergency_restart() are shared, drop
static qualifier from them. These functions will go to common code once
it is split from enlighten.c.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Create enlighten_pvh.c by splitting off PVH related code from enlighten.c,
put it under CONFIG_XEN_PVH.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

All code to support Xen PV will get under this new option. For the
beginning, check for it in the common code.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

have_vcpu_info_placement applies to both PV and HVM and as we're going
to split the code we need to make it global.

Rename to xen_have_vcpu_info_placement.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

As a preparation to splitting the code we need to untangle it:

x86_hyper_xen -> x86_hyper_xen_hvm and x86_hyper_xen_pv
xen_platform() -> xen_platform_hvm() and xen_platform_pv()
xen_cpu_up_prepare() -> xen_cpu_up_prepare_pv() and xen_cpu_up_prepare_hvm()
xen_cpu_dead() -> xen_cpu_dead_pv() and xen_cpu_dead_pv_hvm()

Add two parameters to xen_cpuhp_setup() to pass proper cpu_up_prepare and
cpu_dead hooks. xen_set_cpu_features() is now PV-only so the redundant
xen_pv_domain() check can be dropped.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Pull x86 mm updates from Ingo Molnar:
 "The main x86 MM changes in this cycle were:

   - continued native kernel PCID support preparation patches to the TLB
     flushing code (Andy Lutomirski)

   - various fixes related to 32-bit compat syscall returning address
     over 4Gb in applications, launched from 64-bit binaries - motivated
     by C/R frameworks such as Virtuozzo. (Dmitry Safonov)

   - continued Intel 5-level paging enablement: in particular the
     conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov)

   - x86/mpx ABI corner case fixes/enhancements (Joerg Roedel)

   - ... plus misc updates, fixes and cleanups"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
  mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
  x86/mm: Fix flush_tlb_page() on Xen
  x86/mm: Make flush_tlb_mm_range() more predictable
  x86/mm: Remove flush_tlb() and flush_tlb_current_task()
  x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
  x86/mm/64: Fix crash in remove_pagetable()
  Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"
  x86/boot/e820: Remove a redundant self assignment
  x86/mm: Fix dump pagetables for 4 levels of page tables
  x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow
  x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
  Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"
  x86/espfix: Add support for 5-level paging
  x86/kasan: Extend KASAN to support 5-level paging
  x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y
  x86/paravirt: Add 5-level support to the paravirt code
  x86/mm: Define virtual memory map for 5-level paging
  x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert
  x86/boot: Detect 5-level paging support
  x86/mm/numa: Remove numa_nodemask_from_meminfo()
  ...

Pull x86 vdso updates from Ingo Molnar:
 "Add support for vDSO acceleration of the "Hyper-V TSC page", to speed
  up clock reading on Hyper-V guests"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Add VCLOCK_HVCLOCK vDSO clock read method
  x86/hyperv: Move TSC reading method to asm/mshyperv.h
  x86/hyperv: Implement hv_get_tsc_page()

Pull x86 platform updates from Ingo Molnar:
 "Most of the commits are continued SGI UV4 hardware-enablement changes,
  plus there's also new Bluetooth support for the Intel Edison platform"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/intel-mid: Enable Bluetooth support on Intel Edison
  x86/platform/uv/BAU: Implement uv4_wait_completion with read_status
  x86/platform/uv/BAU: Add wait_completion to bau_operations
  x86/platform/uv/BAU: Add status mmr location fields to bau_control
  x86/platform/uv/BAU: Cleanup bau_operations declaration and instances
  x86/platform/uv/BAU: Add payload descriptor qualifier
  x86/platform/uv/BAU: Add uv_bau_version enumerated constants

Pull x86 irq update from Ingo Molnar:
 "A single commit that micro-optimizes an IRQ vectors code path in the
  CPU offlining code"

* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Optimize free vector check in the CPU offline path

Pull x86 debug updates from Ingo Molnar:
 "The biggest update is the addition of USB3 debug port based
  early-console.

  Greg was fine with the USB changes and with the routing of these
  patches:

    https://www.spinics.net/lists/linux-usb/msg155093.html"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  usb/doc: Add document for USB3 debug port usage
  usb/serial: Add DBC debug device support to usb_debug
  x86/earlyprintk: Add support for earlyprintk via USB3 debug port
  usb/early: Add driver for xhci debug capability
  x86/timers: Add simple udelay calibration

Pull x86 cleanups from Ingo Molnar:
 "A handful of small cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Remove a redundant #ifdef directive
  x86/smp: Remove the redundant #ifdef CONFIG_SMP directive
  x86/smp: Reduce code duplication
  x86/pci-calgary: Use setup_timer() instead of open coding it.

Pull x86 build update from Ingo Molnar:
 "A single CLang support related fix"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kbuild: Use cc-option to enable -falign-{jumps/loops}

Pull x86 asm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - unwinder fixes and enhancements

   - improve ftrace interaction with the unwinder

   - optimize the code footprint of WARN() and related debugging
     constructs

   - ... plus misc updates, cleanups and fixes"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/unwind: Dump all stacks in unwind_dump()
  x86/unwind: Silence more entry-code related warnings
  x86/ftrace: Fix ebp in ftrace_regs_caller that screws up unwinder
  x86/unwind: Remove unused 'sp' parameter in unwind_dump()
  x86/unwind: Prepend hex mask value with '0x' in unwind_dump()
  x86/unwind: Properly zero-pad 32-bit values in unwind_dump()
  x86/unwind: Ensure stack pointer is aligned
  debug: Avoid setting BUGFLAG_WARNING twice
  x86/unwind: Silence entry-related warnings
  x86/unwind: Read stack return address in update_stack_state()
  x86/unwind: Move common code into update_stack_state()
  debug: Fix __bug_table[] in arch linker scripts
  debug: Add _ONCE() logic to report_bug()
  x86/debug: Define BUG() again for !CONFIG_BUG
  x86/debug: Implement __WARN() using UD0
  x86/ftrace: Use Makefile logic instead of #ifdef for compiling ftrace_*.o
  x86/ftrace: Add -mfentry support to x86_32 with DYNAMIC_FTRACE set
  x86/ftrace: Clean up ftrace_regs_caller
  x86/ftrace: Add stack frame pointer to ftrace_caller
  x86/ftrace: Move the ftrace specific code out of entry_32.S
  ...

Pull x86 apic updates from Ingo Molnar:
 "Two small cleanups"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Fix a comment in init_apic_mappings()
  x86/apic: Remove the SET_APIC_ID(x) macro

Pull x86 cpu updates from Ingo Molnar:
 "The biggest changes are an extension of the Intel RDT code to extend
  it with Intel Memory Bandwidth Allocation CPU support: MBA allows
  bandwidth allocation between cores, while CBM (already upstream)
  allows CPU cache partitioning.

  There's also misc smaller fixes and updates"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/intel_rdt: Return error for incorrect resource names in schemata
  x86/intel_rdt: Trim whitespace while parsing schemata input
  x86/intel_rdt: Fix padding when resource is enabled via mount
  x86/intel_rdt: Get rid of anon union
  x86/cpu: Keep model defines sorted by model number
  x86/intel_rdt/mba: Add schemata file support for MBA
  x86/intel_rdt: Make schemata file parsers resource specific
  x86/intel_rdt/mba: Add info directory files for Memory Bandwidth Allocation
  x86/intel_rdt: Make information files resource specific
  x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)
  x86/intel_rdt/mba: Memory bandwith allocation feature detect
  x86/intel_rdt: Add resource specific msr update function
  x86/intel_rdt: Move CBM specific data into a struct
  x86/intel_rdt: Cleanup namespace to support multiple resource types
  Documentation, x86: Intel Memory bandwidth allocation
  x86/intel_rdt: Organize code properly
  x86/intel_rdt: Init padding only if a device exists
  x86/intel_rdt: Add cpus_list rdtgroup file
  x86/intel_rdt: Cleanup kernel-doc
  x86/intel_rdt: Update schemata read to show data in tabular format
  ...

Pull x86 boot updates from Ingo Molnar:
 "The biggest changes in this cycle were:

   - reworking of the e820 code: separate in-kernel and boot-ABI data
     structures and apply a whole range of cleanups to the kernel side.

     No change in functionality.

   - enable KASLR by default: it's used by all major distros and it's
     out of the experimental stage as well.

   - ... misc fixes and cleanups"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
  x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails
  x86/reboot: Turn off KVM when halting a CPU
  x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup
  x86: Enable KASLR by default
  boot/param: Move next_arg() function to lib/cmdline.c for later reuse
  x86/boot: Fix Sparse warning by including required header file
  x86/boot/64: Rename start_cpu()
  x86/xen: Update e820 table handling to the new core x86 E820 code
  x86/boot: Fix pr_debug() API braindamage
  xen, x86/headers: Add <linux/device.h> dependency to <asm/xen/page.h>
  x86/boot/e820: Simplify e820__update_table()
  x86/boot/e820: Separate the E820 ABI structures from the in-kernel structures
  x86/boot/e820: Fix and clean up e820_type switch() statements
  x86/boot/e820: Rename the remaining E820 APIs to the e820__*() prefix
  x86/boot/e820: Remove unnecessary #include's
  x86/boot/e820: Rename e820_mark_nosave_regions() to e820__register_nosave_regions()
  x86/boot/e820: Rename e820_reserve_resources*() to e820__reserve_resources*()
  x86/boot/e820: Use bool in query APIs
  x86/boot/e820: Document e820__reserve_setup_data()
  x86/boot/e820: Clean up __e820__update_table() et al
  ...