Pull x86 EFI fixes from Peter Anvin:
 "A few more EFI-related fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Check status field to validate BGRT header
  x86/efi: Fix 32-bit fallout

Pull ARM SoC fixes from Kevin Hilman:
 "A collection of ARM SoC fixes for v3.14-rc1.

  Mostly a collection of Kconfig, device tree data and compilation fixes
  along with fix to drivers/phy that fixes a boot regression on some
  Marvell mvebu platforms"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  dma: mv_xor: Silence a bunch of LPAE-related warnings
  ARM: ux500: disable msp2 device tree node
  ARM: zynq: Reserve not DMAable space in front of the kernel
  ARM: multi_v7_defconfig: Select CONFIG_SOC_DRA7XX
  ARM: imx6: Initialize low-power mode early again
  ARM: pxa: fix various compilation problems
  ARM: pxa: fix compilation problem on AM300EPD board
  ARM: at91: add Atmel's SAMA5D3 Xplained board
  spi/atmel: document clock properties
  mmc: atmel-mci: document clock properties
  ARM: at91: enable USB host on at91sam9n12ek board
  ARM: at91/dt: fix sama5d3 ohci hclk clock reference
  ARM: at91/dt: sam9263: fix compatibility string for the I2C
  ata: sata_mv: Fix probe failures with optional phys
  drivers: phy: Add support for optional phys
  drivers: phy: Make NULL a valid phy reference
  ARM: fix HAVE_ARM_TWD selection for OMAP and shmobile
  ARM: moxart: move DMA_OF selection to driver
  ARM: hisi: fix kconfig warning on HAVE_ARM_TWD

Pull USB fixes from Greg KH:
 "Here is a bunch of USB fixes for 3.14-rc3.  Most of these are xhci
  reverts, fixing a bunch of reported issues with USB 3 host controller
  issues that loads of people have been hitting (with the exception of
  kernel developers, all of our machines seem to be working fine, which
  is why these took so long to get resolved...)

  There are some other minor fixes and new device ids, as ususal.  All
  have been in linux-next successfully"

* tag 'usb-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  usb: option: blacklist ZTE MF667 net interface
  Revert "usb: xhci: Link TRB must not occur within a USB payload burst"
  Revert "xhci: Avoid infinite loop when sg urb requires too many trbs"
  Revert "xhci: Set scatter-gather limit to avoid failed block writes."
  xhci 1.0: Limit arbitrarily-aligned scatter gather.
  Modpost: fixed USB alias generation for ranges including 0x9 and 0xA
  usb: core: Fix potential memory leak adding dyn USBdevice IDs
  USB: ftdi_sio: add Tagsys RFID Reader IDs
  usb: qcserial: add Netgear Aircard 340U
  usb-storage: enable multi-LUN scanning when needed
  USB: simple: add Dynastream ANT USB-m Stick device support
  usb-storage: add unusual-devs entry for BlackBerry 9000
  usb-storage: restrict bcdDevice range for Super Top in Cypress ATACB
  usb: phy: move some error messages to debug
  usb: ftdi_sio: add Mindstorms EV3 console adapter
  usb: dwc2: fix memory corruption in dwc2 driver
  usb: dwc2: fix role switch breakage
  usb: dwc2: bail out early when booting with "nousb"
  Revert "xhci: replace xhci_read_64() with readq()"
  Revert "xhci: replace xhci_write_64() with writeq()"
  ...

Pull tty/serial driver fixes from Greg KH:
 "Here are a small number of tty/serial driver fixes to resolve reported
  issues with 3.14-rc and earlier (in the case of the vt bugfix).  Some
  of these have been tested and reported by a number of people as the
  tty bugfix was pretty commonly hit on some platforms.

  All have been in linux-next for a while"

* tag 'tty-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Fix secure clear screen
  serial: 8250: Support XR17V35x fraction divisor
  n_tty: Fix stale echo output
  serial: sirf: fix kernel panic caused by unpaired spinlock
  serial: 8250_pci: unbreak last serial ports on NetMos 9865 cards
  n_tty: Fix poll() when TIME_CHAR and MIN_CHAR == 0
  serial: omap: fix rs485 probe on defered pinctrl
  serial: 8250_dw: fix compilation warning when !CONFIG_PM_SLEEP
  serial: omap-serial: Move info message to probe function
  tty: Set correct tty name in 'active' sysfs attribute
  tty: n_gsm: Fix for modems with brk in modem status control
  drivers/tty/hvc: don't use module_init in non-modular hyp. console code

Pull staging driver fixes from Greg KH:
 "Here are a number (lots, I know) of fixes for staging drivers to
  resolve a bunch of reported issues.

  The largest patches here is one revert of a patch that is in 3.14-rc1
  to fix reported problems, and a sync of a usb host driver that
  required some ARM patches to go in before it could be accepted (which
  is why it missed -rc1)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (56 commits)
  staging/rtl8821ae: fix build, depends on MAC80211
  iio: max1363: Use devm_regulator_get_optional for optional regulator
  iio:accel:bma180: Use modifier instead of index in channel specification
  iio: adis16400: Set timestamp as the last element in chan_spec
  iio: ak8975: Fix calculation formula for convert micro tesla to gauss unit
  staging:iio:ad799x fix typo in ad799x_events[]
  iio: mxs-lradc: remove useless scale_available files
  iio: mxs-lradc: fix buffer overflow
  iio:magnetometer:mag3110: Fix output of decimal digits in show_int_plus_micros()
  iio:magnetometer:mag3110: Report busy in _read_raw() / write_raw() when buffer is enabled
  wlags49_h2: Fix overflow in wireless_set_essid()
  xlr_net: Fix missing trivial allocation check
  staging: r8188eu: overflow in rtw_p2p_get_go_device_address()
  staging: r8188eu: array overflow in rtw_mp_ioctl_hdl()
  staging: r8188eu: Fix typo in USB_DEVICE list
  usbip/userspace/libsrc/names.c: memory leak
  gpu: ion: dereferencing an ERR_PTR
  staging: comedi: usbduxsigma: fix unaligned dereferences
  staging: comedi: fix too early cleanup in comedi_auto_config()
  staging: android: ion: dummy: fix an error code
  ...

Merge tag 'driver-core-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single driver core patch for 3.14-rc3 for the component code
  that Russell has found and fixed"

* tag 'driver-core-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers/base: fix devres handling for master device

Pull char/misc fixes from Greg KH:
 "Here are some small char/misc driver fixes, along with some
  documentation updates, for 3.14-rc3.  Nothing major, just a number of
  fixes for reported issues"

* tag 'char-misc-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "misc: eeprom: sunxi: Add new compatibles"
  Revert "ARM: sunxi: dt: Convert to the new SID compatibles"
  misc: mic: fix possible signed underflow (undefined behavior) in userspace API
  ARM: sunxi: dt: Convert to the new SID compatibles
  misc: eeprom: sunxi: Add new compatibles
  misc: genwqe: Fix potential memory leak when pinning memory
  Documentation:Update Documentation/zh_CN/arm64/memory.txt
  Documentation:Update Documentation/zh_CN/arm64/booting.txt
  Documentation:Chinese translation of Documentation/arm64/tagged-pointers.txt
  raw: set range for MAX_RAW_DEVS
  raw: test against runtime value of max_raw_minors
  Drivers: hv: vmbus: Don't timeout during the initial connection with host
  Drivers: hv: vmbus: Specify the target CPU that should receive notification
  VME: Correct read/write alignment algorithm
  mei: don't unset read cb ptr on reset
  mei: clear write cb from waiting list on reset

Pull two nfsd bugfixes from Bruce Fields.

* 'for-3.14' of git://linux-nfs.org/~bfields/linux:
  lockd: send correct lock when granting a delayed lock.
  nfsd4: fix acl buffer overrun

Pull md fixes from Neil Brown:
 "Two bugfixes for md

  both tagged for -stable"

* tag 'md/3.14-fixes' of git://neil.brown.name/md:
  md/raid5: Fix CPU hotplug callback registration
  md/raid1: restore ability for check and repair to fix read errors.

This reverts commit f0de8e04, it is
incorrect, a future patch will fix this up properly.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 01ab1167, it is
incorrect, a future patch will fix this up properly.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There have been reports of EFI crashes since -rc1. The following two
commits fix known issues.

 * Fix boot failure on 32-bit EFI due to the recent EFI memmap changes
   merged during the merge window - Borislav Petkov

 * Avoid a crash during efi_bgrt_init() by detecting invalid BGRT
   headers based on the 'status' field.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Pull KVM fixes from Paolo Bonzini:
 "A small error handling problem and a compile breakage for ARM64"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  arm64: KVM: Add VGIC device control for arm64
  KVM: return an error code in kvm_vm_ioctl_register_coalesced_mmio()

Pull x86 fixes from Peter Anvin:
 "A collection of small fixes:

   - There still seem to be problems with asm goto which requires the
     empty asm hack.
   - If SMAP is disabled at compile time, don't enable it nor try to
     interpret a page fault as an SMAP violation.
   - Fix a case of unbounded recursion while tracing"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, smap: smap_violation() is bogus if CONFIG_X86_SMAP is off
  x86, smap: Don't enable SMAP if CONFIG_X86_SMAP is disabled
  compiler/gcc4: Make quirk for asm_volatile_goto() unconditional
  x86: Use preempt_disable_notrace() in cycles_2_ns()

Pull ACPI and power management fixes from Rafael Wysocki:
 "These include a fix for a recent intel_pstate regression, a fix for a
  regression in the ACPI-based PCI hotplug (ACPIPHP) code introduced
  during the 3.12 cycle, fixes for two bugs in the ACPI core introduced
  recently and a MAINTAINERS update related to cpufreq.

  Specifics:

   - Fix for a recent regression in the intel_pstate driver that
     introduced a race condition causing systems to crash during
     initialization in some situations.  This removes the affected code
     altogether.  From Dirk Brandewie.

   - ACPIPHP fix for a regression introduced during the 3.12 cycle
     causing devices to be dropped as a result of bus check
     notifications after system resume on some systems due to the way
     ACPIPHP interprets _STA return values (arguably incorrectly).  From
     Mika Westerberg.

   - ACPI dock driver fix for a problem causing docking to fail due to a
     check that always fails after recent ACPI core changes (found by
     code inspection).

   - ACPI container driver fix to prevent memory from being leaked in an
     error code path after device_register() failures.

   - Update of the arm_big_little cpufreq driver maintainer's e-mail
     address"

* tag 'pm+acpi-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  MAINTAINERS / cpufreq: update Sudeep's email address
  intel_pstate: Remove energy reporting from pstate_sample tracepoint
  ACPI / container: Fix error code path in container_device_attach()
  ACPI / hotplug / PCI: Relax the checking of _STA return values
  ACPI / dock: Use acpi_device_enumerated() to check if dock is present

Pull EDAC fixes from Borislav Petkov:
 "Fix polling timeout setting through sysfs.

  You're surely wondering why the patches are not based on an rc.  Well,
  Andrew sent you 79040cad ("drivers/edac/edac_mc_sysfs.c: poll
  timeout cannot be zero sent you") already (it got in in -rc2) but it
  is not enough as a fix because for one, setting too low polling
  intervals (< 1sec) don't make any sense and cause unnecessary polling
  load on the system.

  Then, even if we set some interval, we explode with

    [ 4143.094342] WARNING: CPU: 1 PID: 0 at kernel/workqueue.c:1393 __queue_work+0x1d7/0x340()

  because the workqueue setup path is used also for the timeout period
  resetting and we're doing INIT_DELAYED_WORK() on an already active
  workqueue.  Which is total bollocks.  So this is taken care of by the
  second patch.

  I've CCed stable for those two"

* tag 'edac_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Correct workqueue setup path
  EDAC: Poll timeout cannot be zero, p2

Pull fbdev fixes from Tomi Valkeinen:
 "Minor fbdev fixes for 3.14"

* tag 'fbdev-fixes-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.
  video: exynos: Fix S6E8AX0 LCD driver build error
  OMAPDSS: fix fck field types
  OMAPDSS: DISPC: decimation rounding fix

Pull block IO fixes from Jens Axboe:
 "Second round of updates and fixes for 3.14-rc2.  Most of this stuff
  has been queued up for a while.  The notable exception is the blk-mq
  changes, which are naturally a bit more in flux still.

  The pull request contains:

   - Two bug fixes for the new immutable vecs, causing crashes with raid
     or swap.  From Kent.

   - Various blk-mq tweaks and fixes from Christoph.  A fix for
     integrity bio's from Nic.

   - A few bcache fixes from Kent and Darrick Wong.

   - xen-blk{front,back} fixes from David Vrabel, Matt Rushton, Nicolas
     Swenson, and Roger Pau Monne.

   - Fix for a vec miscount with integrity vectors from Martin.

   - Minor annotations or fixes from Masanari Iida and Rashika Kheria.

   - Tweak to null_blk to do more normal FIFO processing of requests
     from Shlomo Pongratz.

   - Elevator switching bypass fix from Tejun.

   - Softlockup in blkdev_issue_discard() fix when !CONFIG_PREEMPT from
     me"

* 'for-linus' of git://git.kernel.dk/linux-block: (31 commits)
  block: add cond_resched() to potentially long running ioctl discard loop
  xen-blkback: init persistent_purge_work work_struct
  blk-mq: pair blk_mq_start_request / blk_mq_requeue_request
  blk-mq: dont assume rq->errors is set when returning an error from ->queue_rq
  block: Fix cloning of discard/write same bios
  block: Fix type mismatch in ssize_t_blk_mq_tag_sysfs_show
  blk-mq: rework flush sequencing logic
  null_blk: use blk_complete_request and blk_mq_complete_request
  virtio_blk: use blk_mq_complete_request
  blk-mq: rework I/O completions
  fs: Add prototype declaration to appropriate header file include/linux/bio.h
  fs: Mark function as static in fs/bio-integrity.c
  block/null_blk: Fix completion processing from LIFO to FIFO
  block: Explicitly handle discard/write same segments
  block: Fix nr_vecs for inline integrity vectors
  blk-mq: Add bio_integrity setup to blk_mq_make_request
  blk-mq: initialize sg_reserved_size
  blk-mq: handle dma_drain_size
  blk-mq: divert __blk_put_request for MQ ops
  blk-mq: support at_head inserations for blk_execute_rq
  ...

Pull sound fixes from Takashi Iwai:
 "Again only fixes for HD-audio:
   - regression fixes due to the modularization
   - a few fixups for Dell, Sony and HP laptops
   - a revert of the previous fix as it leads to another regression"

* tag 'sound-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: Revert "ALSA: hda/realtek - Avoid invalid COEFs for ALC271X"
  ALSA: hda - Fix undefined symbol due to builtin/module mixup
  ALSA: hda - Fix mic capture on Sony VAIO Pro 11
  ALSA: hda - Add a headset quirk for Dell XPS 13
  ALSA: hda - Fix inconsistent Mic mute LED
  ALSA: hda - Fix leftover ifdef checks after modularization

Pull RDMA/InfiniBand fixes from Roland Dreier:

 - Fix some rough edges from the "IP addressing for IBoE" merge

 - Other misc fixes, mostly to hardware drivers

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (21 commits)
  RDMA/ocrdma: Fix load time panic during GID table init
  RDMA/ocrdma: Fix traffic class shift
  IB/iser: Fix use after free in iser_snd_completion()
  IB/iser: Avoid dereferencing iscsi_iser conn object when not bound to iser connection
  IB/usnic: Fix smatch endianness error
  IB/mlx5: Remove dependency on X86
  mlx5: Add include of <linux/slab.h> because of kzalloc()/kfree() use
  IB/qib: Add missing serdes init sequence
  RDMA/cxgb4: Add missing neigh_release in LE-Workaround path
  IB: Report using RoCE IP based gids in port caps
  IB/mlx4: Build the port IBoE GID table properly under bonding
  IB/mlx4: Do IBoE GID table resets per-port
  IB/mlx4: Do IBoE locking earlier when initializing the GID table
  IB/mlx4: Move rtnl locking to the right place
  IB/mlx4: Make sure GID index 0 is always occupied
  IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device
  RDMA/amso1100: Fix error return code
  RDMA/nes: Fix error return code
  IB/mlx5: Don't set "block multicast loopback" capability
  IB/mlx5: Fix binary compatibility with libmlx5
  ...

Pull hwmon fix from Guenter Roeck:
 "Fix arithmetic overflow in ntc_thermistor driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ntc_thermistor) Avoid math overflow

Pull battery fixes from Dmitry Eremin-Solenikov:

 - Fix NULL pointer dereference in max17040 driver

 - Add bq2415x dts bindings documentation

 - Fix misleading comment in ds2782 driver

 - Remove useless check in isp1704 charger driver.

* tag 'for-v3.14-fixes' of git://git.infradead.org/battery-2.6:
  power: max17040: Fix NULL pointer dereference when there is no platform_data
  dt: binding documentation for bq2415x charger
  isp1704_charger: remove useless check in isp1704_charger_probe()
  power: ds2782_battery: Typo in comment

Merge branches 'cma', 'cxgb4', 'iser', 'misc', 'mlx4', 'mlx5', 'nes', 'ocrdma', 'qib' and 'usnic' into for-next

We should use rdma_vlan_dev_real_dev() instead of using vlan_dev_real_dev()
when building the GID table for a vlan interface.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Use correct value for obtaining traffic class from device
response for Query QP request.
Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

We use "tx_desc" again after we free it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Fix a possible NULL pointer dereference in disconnection flow. This
can happen if the target disconnected/rejected the connection request,
e.g before the binding stage between iscsi connection to the transport
connection.
Signed-off-by: Alex Tabachnik <alext@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Error reported at http://marc.info/?l=linux-rdma&m=138995755801039&w=2

Fix short to int cast for big endian systems.
Signed-off-by: Upinder Malhi <umalhi@cisco.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

This fixes the build breakage introduced by
c07a0191 and adds support for the device
control API and save/restore of the VGIC state for ARMv8.

The defines were simply missing from the arm64 header files and
uaccess.h must be implicitly imported from somewhere else on arm.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Madper reported seeing the following crash,

  BUG: unable to handle kernel paging request at ffffffffff340003
  IP: [<ffffffff81d85ba4>] efi_bgrt_init+0x9d/0x133
  Call Trace:
   [<ffffffff81d8525d>] efi_late_init+0x9/0xb
   [<ffffffff81d68f59>] start_kernel+0x436/0x450
   [<ffffffff81d6892c>] ? repair_env_string+0x5c/0x5c
   [<ffffffff81d68120>] ? early_idt_handlers+0x120/0x120
   [<ffffffff81d685de>] x86_64_start_reservations+0x2a/0x2c
   [<ffffffff81d6871e>] x86_64_start_kernel+0x13e/0x14d

This is caused because the layout of the ACPI BGRT header on this system
doesn't match the definition from the ACPI spec, and so we get a bogus
physical address when dereferencing ->image_address in efi_bgrt_init().

Luckily the status field in the BGRT header clearly marks it as invalid,
so we can check that field and skip BGRT initialisation.
Reported-by: Madper Xie <cxie@redhat.com>
Suggested-by: Toshi Kani <toshi.kani@hp.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

We're using edac_mc_workq_setup() both on the init path, when
we load an edac driver and when we change the polling period
(edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec.

On that second path we don't need to init the workqueue which has been
initialized already.

Thanks to Tejun for workqueue insights.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com
Cc: <stable@vger.kernel.org>

Sanitize code even more to accept unsigned longs only and to not allow
polling intervals below 1 second as this is unnecessary and doesn't make
much sense anyway for polling errors.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: <stable@vger.kernel.org>

We do not enable the new efi memmap on 32-bit and thus we need to run
runtime_code_page_mkexec() unconditionally there. Fix that.
Reported-and-tested-by: Lejun Zhu <lejun.zhu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Without that patch, a user can't select the imxfb driver when the i.MX25
and/or the i.MX27 device tree board are selected and that no boards that
selects IMX_HAVE_PLATFORM_IMX_FB are compiled in.

Cc: Eric Bénard <eric@eukrea.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Denis Carikli <denis@eukrea.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Enable S6E8AX0 LCD driver only if LCD_CLASS_DEVICE is a built-in driver.
Else we get the following errors due to missing symbols:
drivers/built-in.o: In function `s6e8ax0_probe':
:(.text+0x51aec): undefined reference to `lcd_device_register'
:(.text+0x51c44): undefined reference to `lcd_device_unregister'
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Remove Kconfig dependency of mlx5_ib/mlx5_core on X86, since there is
no such dependency in reality.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>

On some architectures (for example, arm), we don't end up indirectly
pulling in the declaration of kzalloc() and kfree(), and so building
anything that includes <linux/mlx5/driver.h> breaks.  Fix this by adding
an explicit include to get the declaration.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

The ntc thermistor code was doing math whose temporary result might
have overflowed 32-bits.  We need some casts in there to make it safe.

In one example I found:
- pullup_uV: 1800000
- result of iio_read_channel_raw: 3226
- 1800000 * 3226 => 0x15a1cbc80
Signed-off-by: Doug Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Research has shown that commit a77fcf89 ("IB/qib: Use a single
txselect module parameter for serdes tuning") missed a key serdes init
sequence.

This patch add that sequence.

Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>