- 19 Sep, 2019 1 commit
-
-
Johan Hovold authored
The disconnect callback was accessing the hardware-descriptor private data after having having freed it. Fixes: 7490b008 ("ieee802154: add support for atusb transceiver") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: Alexander Aring <alex.aring@gmail.com> Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org>
-
- 26 Aug, 2019 1 commit
-
-
Prashant Malani authored
get_registers() blindly copies the memory written to by the usb_control_msg() call even if the underlying urb failed. This could lead to junk register values being read by the driver, since some indirect callers of get_registers() ignore the return values. One example is: ocp_read_dword() ignores the return value of generic_ocp_read(), which calls get_registers(). So, emulate PCI "Master Abort" behavior by setting the buffer to all 0xFFs when usb_control_msg() fails. This patch is copied from the r8152 driver (v2.12.0) published by Realtek (www.realtek.com). Signed-off-by:
Prashant Malani <pmalani@chromium.org> Acked-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 25 Aug, 2019 3 commits
-
-
Yi-Hung Wei authored
This patch addresses a conntrack cache issue with timeout policy. Currently, we do not check if the timeout extension is set properly in the cached conntrack entry. Thus, after packet recirculate from conntrack action, the timeout policy is not applied properly. This patch fixes the aforementioned issue. Fixes: 06bd2bdf ("openvswitch: Add timeout support to ct action") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Yi-Hung Wei <yihung.wei@gmail.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Alexey Kodanev authored
When using mpls over gre/gre6 setup, rt->rt_gw4 address is not set, the same for rt->rt_gw_family. Therefore, when rt->rt_gw_family is checked in mpls_xmit(), neigh_xmit() call is skipped. As a result, such setup doesn't work anymore. This issue was found with LTP mpls03 tests. Fixes: 1550c171 ("ipv4: Prepare rtable for IPv6 gateway") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
Donald reported this sequence: ip next add id 1 blackhole ip next add id 2 blackhole ip ro add 1.1.1.1/32 nhid 1 ip ro add 1.1.1.2/32 nhid 2 would cause a crash. Backtrace is: [ 151.302790] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 151.304043] CPU: 1 PID: 277 Comm: ip Not tainted 5.3.0-rc5+ #37 [ 151.305078] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 [ 151.306526] RIP: 0010:fib_add_nexthop+0x8b/0x2aa [ 151.307343] Code: 35 f7 81 48 8d 14 01 c7 02 f1 f1 f1 f1 c7 42 04 01 f4 f4 f4 48 89 f2 48 c1 ea 03 65 48 8b 0c 25 28 00 00 00 48 89 4d d0 31 c9 <80> 3c 02 00 74 08 48 89 f7 e8 1a e8 53 ff be 08 00 00 00 4c 89 e7 [ 151.310549] RSP: 0018:ffff888116c27340 EFLAGS: 00010246 [ 151.311469] RAX: dffffc0000000000 RBX: ffff8881154ece00 RCX: 0000000000000000 [ 151.312713] RDX: 0000000000000004 RSI: 0000000000000020 RDI: ffff888115649b40 [ 151.313968] RBP: ffff888116c273d8 R08: ffffed10221e3757 R09: ffff888110f1bab8 [ 151.315212] R10: 0000000000000001 R11: ffff888110f1bab3 R12: ffff888115649b40 [ 151.316456] R13: 0000000000000020 R14: ffff888116c273b0 R15: ffff888115649b40 [ 151.317707] FS: 00007f60b4d8d800(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 [ 151.319113] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.320119] CR2: 0000555671ffdc00 CR3: 00000001136ba005 CR4: 0000000000020ee0 [ 151.321367] Call Trace: [ 151.321820] ? fib_nexthop_info+0x635/0x635 [ 151.322572] fib_dump_info+0xaa4/0xde0 [ 151.323247] ? fib_create_info+0x2431/0x2431 [ 151.324008] ? napi_alloc_frag+0x2a/0x2a [ 151.324711] rtmsg_fib+0x2c4/0x3be [ 151.325339] fib_table_insert+0xe2f/0xeee ... fib_dump_info incorrectly has nhs = 0 for blackhole nexthops, so it believes the nexthop object is a multipath group (nhs != 1) and ends up down the nexthop_mpath_fill_node() path which is wrong for a blackhole. The blackhole check in nexthop_num_path is leftover from early days of the blackhole implementation which did not initialize the device. In the end the design was simpler (fewer special case checks) to set the device to loopback in nh_info, so the check in nexthop_num_path should have been removed. Fixes: 430a0491 ("nexthop: Add support for nexthop groups") Reported-by:
Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by:
-
- 24 Aug, 2019 12 commits
-
-
Zhu Yanjun authored
>From IB specific 7.6.5 SERVICE LEVEL, Service Level (SL) is used to identify different flows within an IBA subnet. It is carried in the local route header of the packet. Before this commit, run "rds-info -I". The outputs are as below: " RDS IB Connections: LocalAddr RemoteAddr Tos SL LocalDev RemoteDev 192.2.95.3 192.2.95.1 2 0 fe80::21:28:1a:39 fe80::21:28:10:b9 192.2.95.3 192.2.95.1 1 0 fe80::21:28:1a:39 fe80::21:28:10:b9 192.2.95.3 192.2.95.1 0 0 fe80::21:28:1a:39 fe80::21:28:10:b9 " After this commit, the output is as below: " RDS IB Connections: LocalAddr RemoteAddr Tos SL LocalDev RemoteDev 192.2.95.3 192.2.95.1 2 2 fe80::21:28:1a:39 fe80::21:28:10:b9 192.2.95.3 192.2.95.1 1 1 fe80::21:28:1a:39 fe80::21:28:10:b9 192.2.95.3 192.2.95.1 0 0 fe80::21:28:1a:39 fe80::21:28:10:b9 " The commit fe3475af ("net: rds: add per rds connection cache statistics") adds cache_allocs in struct rds_info_rdma_connection as below: struct rds_info_rdma_connection { ... __u32 rdma_mr_max; __u32 rdma_mr_size; __u8 tos; __u32 cache_allocs; }; The peer struct in rds-tools of struct rds_info_rdma_connection is as below: struct rds_info_rdma_connection { ... uint32_t rdma_mr_max; uint32_t rdma_mr_size; uint8_t tos; uint8_t sl; uint32_t cache_allocs; }; The difference between userspace and kernel is the member variable sl. In the kernel struct, the member variable sl is missing. This will introduce risks. So it is necessary to use this commit to avoid this risk. Fixes: fe3475af ("net: rds: add per rds connection cache statistics") CC: Joe Jin <joe.jin@oracle.com> CC: JUNXIAO_BI <junxiao.bi@oracle.com> Suggested-by:
Gerd Rausch <gerd.rausch@oracle.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
John Fastabend authored
An excerpt from netlink(7) man page, In multipart messages (multiple nlmsghdr headers with associated payload in one byte stream) the first and all following headers have the NLM_F_MULTI flag set, except for the last header which has the type NLMSG_DONE. but, after (ee28906f) there is a missing NLM_F_MULTI flag in the middle of a FIB dump. The result is user space applications following above man page excerpt may get confused and may stop parsing msg believing something went wrong. In the golang netlink lib [0] the library logic stops parsing believing the message is not a multipart message. Found this running Cilium[1] against net-next while adding a feature to auto-detect routes. I noticed with multiple route tables we no longer could detect the default routes on net tree kernels because the library logic was not returning them. Fix this by handling the fib_dump_info_fnhe() case the same way the fib_dump_info() handles it by passing the flags argument through the call chain and adding a flags argument to rt_fill_info(). Tested with Cilium stack and auto-detection of routes works again. Also annotated libs to dump netlink msgs and inspected NLM_F_MULTI and NLMSG_DONE flags look correct after this. Note: In inet_rtm_getroute() pass rt_fill_info() '0' for flags the same as is done for fib_dump_info() so this looks correct to me. [0] https://github.com/vishvananda/netlink/ [1] https://github.com/cilium/ Fixes: ee28906f ("ipv4: Dump route exceptions if requested") Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Julian Wiedmann authored
Commit d4c08afa ("s390/qeth: streamline SNMP cmd code") removed the bounds checking for req_len, under the assumption that the check in qeth_alloc_cmd() would suffice. But that code path isn't sufficiently robust to handle a user-provided data_length, which could overflow (when adding the cmd header overhead) before being checked against QETH_BUFSIZE. We end up allocating just a tiny iob, and the subsequent copy_from_user() writes past the end of that iob. Special-case this path and add a coarse bounds check, to protect against maliciuous requests. This let's the subsequent code flow do its normal job and precise checking, without risk of overflow. Fixes: d4c08afa ("s390/qeth: streamline SNMP cmd code") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
zhanglin authored
If protocols registered exceeded PROTO_INUSE_NR, prot will be added to proto_list, but no available bit left for prot in proto_inuse_idx. Changes since v2: * Propagate the error code properly Signed-off-by:
zhanglin <zhang.lin16@zte.com.cn> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-08-22 This series introduces some fixes to mlx5 driver. 1) Form Moshe, two fixes for firmware health reporter 2) From Eran, two ktls fixes. ==================== Signed-off-by: -
Andrew Lunn authored
Russell king maintains phylink, as part of the SFP module support. However, much of the review work is about drivers swapping from phylib to phylink. Such changes don't make changes to the phylink core, and so the F: rules in MAINTAINERS don't match. Add a K:, keywork rule, which hopefully get_maintainers will match against for patches to MAC drivers swapping to phylink. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Hangbin Liu says: ==================== fix dev null pointer dereference when send packets larger than mtu in collect_md mode When we send a packet larger than PMTU, we need to reply with icmp_send(ICMP_FRAG_NEEDED) or icmpv6_send(ICMPV6_PKT_TOOBIG). But with collect_md mode, kernel will crash while accessing the dst dev as __metadata_dst_init() init dst->dev to NULL by default. Here is what the code path looks like, for GRE: - ip6gre_tunnel_xmit - ip6gre_xmit_ipv4 - __gre6_xmit - ip6_tnl_xmit - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE - icmp_send - net = dev_net(rt->dst.dev); <-- here - ip6gre_xmit_ipv6 - __gre6_xmit - ip6_tnl_xmit - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE - icmpv6_send ... - decode_session4 - oif = skb_dst(skb)->dev->ifindex; <-- here - decode_session6 - oif = skb_dst(skb)->dev->ifindex; <-- here We could not fix it in __metadata_dst_init() as there is no dev supplied. Look in to the __icmp_send()/decode_session{4,6} code we could find the dst dev is actually not needed. In __icmp_send(), we could get the net by skb->dev. For decode_session{4,6}, as it was called by xfrm_decode_session_reverse() in this scenario, the oif is not used by fl4->flowi4_oif = reverse ? skb->skb_iif : oif; The reproducer is easy: ovs-vsctl add-br br0 ip link set br0 up ovs-vsctl add-port br0 gre0 -- set interface gre0 type=gre options:remote_ip=$dst_addr ip link set gre0 up ip addr add ${local_gre6}/64 dev br0 ping6 $remote_gre6 -s 1500 The kernel will crash like [40595.821651] BUG: kernel NULL pointer dereference, address: 0000000000000108 [40595.822411] #PF: supervisor read access in kernel mode [40595.822949] #PF: error_code(0x0000) - not-present page [40595.823492] PGD 0 P4D 0 [40595.823767] Oops: 0000 [#1] SMP PTI [40595.824139] CPU: 0 PID: 2831 Comm: handler12 Not tainted 5.2.0 #57 [40595.824788] Hardware name: Red Hat KVM, BIOS 1.11.1-3.module+el8.1.0+2983+b2ae9c0a 04/01/2014 [40595.825680] RIP: 0010:__xfrm_decode_session+0x6b/0x930 [40595.826219] Code: b7 c0 00 00 00 b8 06 00 00 00 66 85 d2 0f b7 ca 48 0f 45 c1 44 0f b6 2c 06 48 8b 47 58 48 83 e0 fe 0f 84 f4 04 00 00 48 8b 00 <44> 8b 80 08 01 00 00 41 f6 c4 01 4c 89 e7 ba 58 00 00 00 0f 85 47 [40595.828155] RSP: 0018:ffffc90000a73438 EFLAGS: 00010286 [40595.828705] RAX: 0000000000000000 RBX: ffff8881329d7100 RCX: 0000000000000000 [40595.829450] RDX: 0000000000000000 RSI: ffff8881339e70ce RDI: ffff8881329d7100 [40595.830191] RBP: ffffc90000a73470 R08: 0000000000000000 R09: 000000000000000a [40595.830936] R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90000a73490 [40595.831682] R13: 000000000000002c R14: ffff888132ff1301 R15: ffff8881329d7100 [40595.832427] FS: 00007f5bfcfd6700(0000) GS:ffff88813ba00000(0000) knlGS:0000000000000000 [40595.833266] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40595.833883] CR2: 0000000000000108 CR3: 000000013a368000 CR4: 00000000000006f0 [40595.834633] Call Trace: [40595.835392] ? rt6_multipath_hash+0x4c/0x390 [40595.835853] icmpv6_route_lookup+0xcb/0x1d0 [40595.836296] ? icmpv6_xrlim_allow+0x3e/0x140 [40595.836751] icmp6_send+0x537/0x840 [40595.837125] icmpv6_send+0x20/0x30 [40595.837494] tnl_update_pmtu.isra.27+0x19d/0x2a0 [ip_tunnel] [40595.838088] ip_md_tunnel_xmit+0x1b6/0x510 [ip_tunnel] [40595.838633] gre_tap_xmit+0x10c/0x160 [ip_gre] [40595.839103] dev_hard_start_xmit+0x93/0x200 [40595.839551] sch_direct_xmit+0x101/0x2d0 [40595.839967] __dev_queue_xmit+0x69f/0x9c0 [40595.840399] do_execute_actions+0x1717/0x1910 [openvswitch] [40595.840987] ? validate_set.isra.12+0x2f5/0x3d0 [openvswitch] [40595.841596] ? reserve_sfa_size+0x31/0x130 [openvswitch] [40595.842154] ? __ovs_nla_copy_actions+0x1b4/0xad0 [openvswitch] [40595.842778] ? __kmalloc_reserve.isra.50+0x2e/0x80 [40595.843285] ? should_failslab+0xa/0x20 [40595.843696] ? __kmalloc+0x188/0x220 [40595.844078] ? __alloc_skb+0x97/0x270 [40595.844472] ovs_execute_actions+0x47/0x120 [openvswitch] [40595.845041] ovs_packet_cmd_execute+0x27d/0x2b0 [openvswitch] [40595.845648] genl_family_rcv_msg+0x3a8/0x430 [40595.846101] genl_rcv_msg+0x47/0x90 [40595.846476] ? __alloc_skb+0x83/0x270 [40595.846866] ? genl_family_rcv_msg+0x430/0x430 [40595.847335] netlink_rcv_skb+0xcb/0x100 [40595.847777] genl_rcv+0x24/0x40 [40595.848113] netlink_unicast+0x17f/0x230 [40595.848535] netlink_sendmsg+0x2ed/0x3e0 [40595.848951] sock_sendmsg+0x4f/0x60 [40595.849323] ___sys_sendmsg+0x2bd/0x2e0 [40595.849733] ? sock_poll+0x6f/0xb0 [40595.850098] ? ep_scan_ready_list.isra.14+0x20b/0x240 [40595.850634] ? _cond_resched+0x15/0x30 [40595.851032] ? ep_poll+0x11b/0x440 [40595.851401] ? _copy_to_user+0x22/0x30 [40595.851799] __sys_sendmsg+0x58/0xa0 [40595.852180] do_syscall_64+0x5b/0x190 [40595.852574] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [40595.853105] RIP: 0033:0x7f5c00038c7d [40595.853489] Code: c7 20 00 00 75 10 b8 2e 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 8e f7 ff ff 48 89 04 24 b8 2e 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 d7 f7 ff ff 48 89 d0 48 83 c4 08 48 3d 01 [40595.855443] RSP: 002b:00007f5bfcf73c00 EFLAGS: 00003293 ORIG_RAX: 000000000000002e [40595.856244] RAX: ffffffffffffffda RBX: 00007f5bfcf74a60 RCX: 00007f5c00038c7d [40595.856990] RDX: 0000000000000000 RSI: 00007f5bfcf73c60 RDI: 0000000000000015 [40595.857736] RBP: 0000000000000004 R08: 0000000000000b7c R09: 0000000000000110 [40595.858613] R10: 0001000800050004 R11: 0000000000003293 R12: 000055c2d8329da0 [40595.859401] R13: 00007f5bfcf74120 R14: 0000000000000347 R15: 00007f5bfcf73c60 [40595.860185] Modules linked in: ip_gre ip_tunnel gre openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 sunrpc bochs_drm ttm drm_kms_helper drm pcspkr joydev i2c_piix4 qemu_fw_cfg xfs libcrc32c virtio_net net_failover serio_raw failover ata_generic virtio_blk pata_acpi floppy [40595.863155] CR2: 0000000000000108 [40595.863551] ---[ end trace 22209bbcacb4addd ]--- v4: Julian Anastasov remind skb->dev also could be NULL in icmp_send. We'd better still use dst.dev and do a check to avoid crash. v3: only replace pkg to packets in cover letter. So I didn't update the version info in the follow up patches. v2: fix it in __icmp_send() and decode_session{4,6} separately instead of updating shared dst dev in {ip_md, ip6}_tunnel_xmit. ==================== Signed-off-by: -
Hangbin Liu authored
In decode_session{4,6} there is a possibility that the skb dst dev is NULL, e,g, with tunnel collect_md mode, which will cause kernel crash. Here is what the code path looks like, for GRE: - ip6gre_tunnel_xmit - ip6gre_xmit_ipv6 - __gre6_xmit - ip6_tnl_xmit - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE - icmpv6_send - icmpv6_route_lookup - xfrm_decode_session_reverse - decode_session4 - oif = skb_dst(skb)->dev->ifindex; <-- here - decode_session6 - oif = skb_dst(skb)->dev->ifindex; <-- here The reason is __metadata_dst_init() init dst->dev to NULL by default. We could not fix it in __metadata_dst_init() as there is no dev supplied. On the other hand, the skb_dst(skb)->dev is actually not needed as we called decode_session{4,6} via xfrm_decode_session_reverse(), so oif is not used by: fl4->flowi4_oif = reverse ? skb->skb_iif : oif; So make a dst dev check here should be clean and safe. v4: No changes. v3: No changes. v2: fix the issue in decode_session{4,6} instead of updating shared dst dev in {ip_md, ip6}_tunnel_xmit. Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by:Hangbin Liu <liuhangbin@gmail.com> Tested-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
-
Hangbin Liu authored
In __icmp_send() there is a possibility that the rt->dst.dev is NULL, e,g, with tunnel collect_md mode, which will cause kernel crash. Here is what the code path looks like, for GRE: - ip6gre_tunnel_xmit - ip6gre_xmit_ipv4 - __gre6_xmit - ip6_tnl_xmit - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE - icmp_send - net = dev_net(rt->dst.dev); <-- here The reason is __metadata_dst_init() init dst->dev to NULL by default. We could not fix it in __metadata_dst_init() as there is no dev supplied. On the other hand, the reason we need rt->dst.dev is to get the net. So we can just try get it from skb->dev when rt->dst.dev is NULL. v4: Julian Anastasov remind skb->dev also could be NULL. We'd better still use dst.dev and do a check to avoid crash. v3: No changes. v2: fix the issue in __icmp_send() instead of updating shared dst dev in {ip_md, ip6}_tunnel_xmit. Fixes: c8b34e68 ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit") Signed-off-by:Julian Anastasov <ja@ssi.bg> Acked-by:
-
Yi-Hung Wei authored
Fixes: 06bd2bdf ("openvswitch: Add timeout support to ct action") Signed-off-by:
-
David S. Miller authored
Merge branch 'ieee802154-for-davem-2019-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2019-08-24 An update from ieee802154 for your *net* tree. Yue Haibing fixed two bugs discovered by KASAN in the hwsim driver for ieee802154 and Colin Ian King cleaned up a redundant variable assignment. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-08-24 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix verifier precision tracking with BPF-to-BPF calls, from Alexei. 2) Fix a use-after-free in prog symbol exposure, from Daniel. 3) Several s390x JIT fixes plus BE related fixes in BPF kselftests, from Ilya. 4) Fix memory leak by unpinning XDP umem pages in error path, from Ivan. 5) Fix a potential use-after-free on flow dissector detach, from Jakub. 6) Fix bpftool to close prog fd after showing metadata, from Quentin. 7) BPF kselftest config and TEST_PROGS_EXTENDED fixes, from Anders. ==================== Signed-off-by:
-
- 23 Aug, 2019 7 commits
-
-
Ilya Leoshkevich authored
test_select_reuseport fails on s390 due to verifier rejecting test_select_reuseport_kern.o with the following message: ; data_check.eth_protocol = reuse_md->eth_protocol; 18: (69) r1 = *(u16 *)(r6 +22) invalid bpf_context access off=22 size=2 This is because on big-endian machines casts from __u32 to __u16 are generated by referencing the respective variable as __u16 with an offset of 2 (as opposed to 0 on little-endian machines). The verifier already has all the infrastructure in place to allow such accesses, it's just that they are not explicitly enabled for eth_protocol field. Enable them for eth_protocol field by using bpf_ctx_range instead of offsetof. Ditto for ip_protocol, bind_inany and len, since they already allow narrowing, and the same problem can arise when working with them. Fixes: 2dbb9b9e ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Daniel Borkmann authored
syzkaller managed to trigger the warning in bpf_jit_free() which checks via bpf_prog_kallsyms_verify_off() for potentially unlinked JITed BPF progs in kallsyms, and subsequently trips over GPF when walking kallsyms entries: [...] 8021q: adding VLAN 0 to HW filter on device batadv0 8021q: adding VLAN 0 to HW filter on device batadv0 WARNING: CPU: 0 PID: 9869 at kernel/bpf/core.c:810 bpf_jit_free+0x1e8/0x2a0 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9869 Comm: kworker/0:7 Not tainted 5.0.0-rc8+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events bpf_prog_free_deferred Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x113/0x167 lib/dump_stack.c:113 panic+0x212/0x40b kernel/panic.c:214 __warn.cold.8+0x1b/0x38 kernel/panic.c:571 report_bug+0x1a4/0x200 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:bpf_jit_free+0x1e8/0x2a0 Code: 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 86 00 00 00 48 ba 00 02 00 00 00 00 ad de 0f b6 43 02 49 39 d6 0f 84 5f fe ff ff <0f> 0b e9 58 fe ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 RSP: 0018:ffff888092f67cd8 EFLAGS: 00010202 RAX: 0000000000000007 RBX: ffffc90001947000 RCX: ffffffff816e9d88 RDX: dead000000000200 RSI: 0000000000000008 RDI: ffff88808769f7f0 RBP: ffff888092f67d00 R08: fffffbfff1394059 R09: fffffbfff1394058 R10: fffffbfff1394058 R11: ffffffff89ca02c7 R12: ffffc90001947002 R13: ffffc90001947020 R14: ffffffff881eca80 R15: ffff88808769f7e8 BUG: unable to handle kernel paging request at fffffbfff400d000 #PF error: [normal kernel read fault] PGD 21ffee067 P4D 21ffee067 PUD 21ffed067 PMD 9f942067 PTE 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 9869 Comm: kworker/0:7 Not tainted 5.0.0-rc8+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events bpf_prog_free_deferred RIP: 0010:bpf_get_prog_addr_region kernel/bpf/core.c:495 [inline] RIP: 0010:bpf_tree_comp kernel/bpf/core.c:558 [inline] RIP: 0010:__lt_find include/linux/rbtree_latch.h:115 [inline] RIP: 0010:latch_tree_find include/linux/rbtree_latch.h:208 [inline] RIP: 0010:bpf_prog_kallsyms_find+0x107/0x2e0 kernel/bpf/core.c:632 Code: 00 f0 ff ff 44 38 c8 7f 08 84 c0 0f 85 fa 00 00 00 41 f6 45 02 01 75 02 0f 0b 48 39 da 0f 82 92 00 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 03 0f 8e 45 01 00 00 8b 03 48 c1 e0 [...] Upon further debugging, it turns out that whenever we trigger this issue, the kallsyms removal in bpf_prog_ksym_node_del() was /skipped/ but yet bpf_jit_free() reported that the entry is /in use/. Problem is that symbol exposure via bpf_prog_kallsyms_add() but also perf_event_bpf_event() were done /after/ bpf_prog_new_fd(). Once the fd is exposed to the public, a parallel close request came in right before we attempted to do the bpf_prog_kallsyms_add(). Given at this time the prog reference count is one, we start to rip everything underneath us via bpf_prog_release() -> bpf_prog_put(). The memory is eventually released via deferred free, so we're seeing that bpf_jit_free() has a kallsym entry because we added it from bpf_prog_load() but /after/ bpf_prog_put() from the remote CPU. Therefore, move both notifications /before/ we install the fd. The issue was never seen between bpf_prog_alloc_id() and bpf_prog_new_fd() because upon bpf_prog_get_fd_by_id() we'll take another reference to the BPF prog, so we're still holding the original reference from the bpf_prog_load(). Fixes: 6ee52e2a ("perf, bpf: Introduce PERF_RECORD_BPF_EVENT") Fixes: 74451e66 ("bpf: make jited programs visible in traces") Reported-by: syzbot+bd3bba6ff3fcea7a6ec6@syzkaller.appspotmail.com Signed-off-by:
-
Alexei Starovoitov authored
While adding extra tests for precision tracking and extra infra to adjust verifier heuristics the existing test "calls: cross frame pruning - liveness propagation" started to fail. The root cause is the same as described in verifer.c comment: * Also if parent's curframe > frame where backtracking started, * the verifier need to mark registers in both frames, otherwise callees * may incorrectly prune callers. This is similar to * commit 7640ead9 ("bpf: verifier: make sure callees don't prune with caller differences") * For now backtracking falls back into conservative marking. Turned out though that returning -ENOTSUPP from backtrack_insn() and doing mark_all_scalars_precise() in the current parentage chain is not enough. Depending on how is_state_visited() heuristic is creating parentage chain it's possible that callee will incorrectly prune caller. Fix the issue by setting precise=true earlier and more aggressively. Before this fix the precision tracking _within_ functions that don't do bpf2bpf calls would still work. Whereas now precision tracking is completely disabled when bpf2bpf calls are present anywhere in the program. No difference in cilium tests (they don't have bpf2bpf calls). No difference in test_progs though some of them have bpf2bpf calls, but precision tracking wasn't effective there. Fixes: b5dc0163 ("bpf: precise scalar_value tracking") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Jakub Sitnicki authored
Call to bpf_prog_put(), with help of call_rcu(), queues an RCU-callback to free the program once a grace period has elapsed. The callback can run together with new RCU readers that started after the last grace period. New RCU readers can potentially see the "old" to-be-freed or already-freed pointer to the program object before the RCU update-side NULLs it. Reorder the operations so that the RCU update-side resets the protected pointer before the end of the grace period after which the program will be freed. Fixes: d58e468b ("flow_dissector: implements flow dissector BPF hook") Reported-by:
Lorenz Bauer <lmb@cloudflare.com> Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Acked-by:
Petar Penkov <ppenkov@google.com> Signed-off-by:
-
Heiner Kallweit authored
This reverts commit f072218c. As reported by Aaro this patch causes network problems on MIPS Loongson platform. Therefore revert it. Fixes: f072218c ("r8169: remove not needed call to dma_sync_single_for_device") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Sabrina Dubroca authored
Currently, ipv6_find_idev returns NULL when ipv6_add_dev fails, ignoring the specific error value. This results in addrconf_add_dev returning ENOBUFS in all cases, which is unfortunate in cases such as: # ip link add dummyX type dummy # ip link set dummyX mtu 1200 up # ip addr add 2000::/64 dev dummyX RTNETLINK answers: No buffer space available Commit a317a2f1 ("ipv6: fail early when creating netdev named all or default") introduced error returns in ipv6_add_dev. Before that, that function would simply return NULL for all failures. Signed-off-by:Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Justin.Lee1@Dell.com authored
The request coming from Netlink should use the OEM generic handler. The standard command handler expects payload in bytes/words/dwords but the actual payload is stored in data if the request is coming from Netlink. Signed-off-by:
Justin Lee <justin.lee1@dell.com> Reviewed-by:
Vijay Khemka <vijaykhemka@fb.com> Signed-off-by:
-
- 22 Aug, 2019 11 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2019-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.3 Third set of fixes for 5.3, and most likely the last one. The rt2x00 regression has been reported multiple times, others are of lower priority. mt76 * fix hang on resume on certain machines rt2x00 * fix AP mode regression related to encryption iwlwifi * avoid unnecessary error messages due to multicast frames when not associated * fix configuration for ax201 devices * fix recognition of QuZ devices ==================== Signed-off-by:
-
Wenwen Wang authored
If qed_mcp_send_drv_version() fails, no cleanup is executed, leading to memory leaks. To fix this issue, introduce the label 'err4' to perform the cleanup work before returning the error. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Acked-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
-
Yangbo Lu authored
The trap action should be copying the frame to CPU and dropping it for forwarding, but current setting was just copying frame to CPU. Fixes: b5962294 ("net: mscc: ocelot: Add support for tcam") Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Acked-by:
Allan W. Nielsen <allan.nielsen@microchip.com> Signed-off-by:
-
Eran Ben Elisha authored
Dump WQE shall not include Ethernet segment. Define mlx5e_dump_wqe to be used for "Dump WQEs" instead of sharing it with the general mlx5e_tx_wqe layout. Fixes: d2ead1f3 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Eran Ben Elisha authored
For TLS WQEs, metadata info did not include num_bytes. Due to this issue, tx_tls_dump_bytes counter did not increment. Modify tx_fill_wi() to fill num bytes. When it is called for non-traffic WQE, zero is expected. Fixes: d2ead1f3 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by:
-
Moshe Shemesh authored
When fw fatal error occurs, poll health() first detects and reports on a fw error. Afterwards, it detects and reports on the fw fatal error itself. That can cause a long delay in fw fatal error handling which waits in a queue for the fw error handling to be finished. The fw error handle will try asking for fw core dump command while fw in fatal state may not respond and driver will wait for command timeout. Changing the flow to detect and handle first fw fatal errors and only if no fatal error detected look for a fw error to handle. Fixes: d1bf0e2c ("net/mlx5: Report devlink health on FW issues") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Reviewed-by:
-
Moshe Shemesh authored
Crdump repeats itself every chunk of 256bytes. That is due to bug of missing progressing offset while copying the data from buffer to devlink_fmsg. Fixes: 9b1f2982 ("net/mlx5: Add support for FW fatal reporter dump") Signed-off-by:
-
Dan Carpenter authored
There is a copy and paste error so we have "rx" where "tx" was intended in the priv->tx[] array. Fixes: f5cedc84 ("gve: Add transmit and receive support") Signed-off-by:
Catherine Sullivan <csully@google.com> Signed-off-by:
-
Li RongQing authored
it expects a unsigned int, but got a __be32 Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
-
Hangbin Liu authored
In commit 93a714d6 ("multicast: Extend ip address command to enable multicast group join/leave on") we added a new flag IFA_F_MCAUTOJOIN to make user able to add multicast address on ethernet interface. This works for IPv4, but not for IPv6. See the inet6_addr_add code. static int inet6_addr_add() { ... if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) { ipv6_mc_config(net->ipv6.mc_autojoin_sk, true...) } ifp = ipv6_add_addr(idev, cfg, true, extack); <- always fail with maddr if (!IS_ERR(ifp)) { ... } else if (cfg->ifa_flags & IFA_F_MCAUTOJOIN) { ipv6_mc_config(net->ipv6.mc_autojoin_sk, false...) } } But in ipv6_add_addr() it will check the address type and reject multicast address directly. So this feature is never worked for IPv6. We should not remove the multicast address check totally in ipv6_add_addr(), but could accept multicast address only when IFA_F_MCAUTOJOIN flag supplied. v2: update commit description Fixes: 93a714d6 ("multicast: Extend ip address command to enable multicast group join/leave on") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
-
Florian Fainelli authored
The SF2 binding does not specify that the CPU port should have properties mandatory for successfully instantiating a PHYLINK object. As such, there will be missing properties (including fixed-link) and when attempting to validate and later configure link modes, we will have an incorrect set of parameters (interface, speed, duplex). Simply prevent the CPU port from being configured through PHYLINK since bcm_sf2_imp_setup() takes care of that already. Fixes: 0e279218 ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 21 Aug, 2019 5 commits
-
-
Antoine Tenart authored
In certain cases when the probe function fails the error path calls cpsw_remove_dt() before calling platform_set_drvdata(). This is an issue as cpsw_remove_dt() uses platform_get_drvdata() to retrieve the cpsw_common data and leds to a NULL pointer exception. This patches fixes it by calling platform_set_drvdata() earlier in the probe. Fixes: 83a8471b ("net: ethernet: ti: cpsw: refactor probe to group common hw initialization") Reported-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - fix uninit-value in batadv_netlink_get_ifindex(), by Eric Dumazet ==================== Signed-off-by: -
Mike Rapoport authored
Replace 'decided' with 'decide' so that comment would be /* To decide when the network namespace should be freed. */ Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2019-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just three fixes: * extended key ID key installation * regulatory processing * possible memory leak in an error path ==================== Signed-off-by:
-
Anders Roxell authored
When ./test_xdp_vlan_mode_generic.sh runs it complains that it can't find file test_xdp_vlan.sh. # selftests: bpf: test_xdp_vlan_mode_generic.sh # ./test_xdp_vlan_mode_generic.sh: line 9: ./test_xdp_vlan.sh: No such file or directory Rework so that test_xdp_vlan.sh gets installed, added to the variable TEST_PROGS_EXTENDED. Fixes: d35661fc ("selftests/bpf: add wrapper scripts for test_xdp_vlan.sh") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Acked-by:
Jesper Dangaard Brouer <jbrouer@redhat.com> Signed-off-by:
-
