Skip to content

L
linux
Switch branch/tag
  1. 02 Jun, 2009 4 commits
    • Andrew Patterson's avatar
      cciss: add cciss driver sysfs entries · 7fe06326
      Andrew Patterson authored 
      Add sysfs entries to the cciss driver needed for the dm/multipath tools.

A file for vendor, model, rev, and unique_id is added for each logical
drive under directory /sys/bus/pci/devices/<dev>/ccissX/cXdY.  Where X =
the controller (or host) number and Y is the logical drive number.

A link from /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY to
/sys/block/cciss!cXdY/device is also created.  A bus is created in
/sys/bus/cciss.  A link is created from the pci ccissX entry to
/sys/bus/cciss/devices/ccissX.  Please consider this for inclusion.
Signed-off-by: default avatarMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      7fe06326
    • Stephen M. Cameron's avatar
      cciss: fix SCSI device reset handler · 88f627ae
      Stephen M. Cameron authored 
      Fix the SCSI reset error handler to send a working, properly addressed
reset message to the target device and add code to wait for the target
device to become ready by polling it with Test Unit Ready.

The existing reset code was broken in that it didn't bother to set the
8-byte LUN address to anything besides zero, so the command was addressed
to the controller, which pretended to the driver that the command
succeeded, while doing nothing.  Ages ago I tested this code, but
unbeknownst to me, my test was flawed, and what I thought was a tape drive
getting reset was actually nothing of the sort.  Unfortunately, there is
still lots of Smartarray firmware that doesn't handle doing target resets
right, and this code won't help in those cases, but it also shouldn't make
things worse in those cases than they already are.
Signed-off-by: default avatarStephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Cc: Mike Miller <mikem@beardog.cca.cpqcorp.net>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      88f627ae
    • Stephen M. Cameron's avatar
      cciss: factor out core of sendcmd() for a more sane interface · 4a4b2d76
      Stephen M. Cameron authored 
      Factor out the core of sendcmd() to provide a simpler interface which
exposes all the error information to the caller and make the original
sendcmd use this new function.  Rationale: The SCSI error handling
routines need to send commands with interrupts turned off, but they also
need access to the full error information.
Signed-off-by: default avatarStephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Cc: Mike Miller <mikem@beardog.cca.cpqcorp.net>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      4a4b2d76
    • Kiyoshi Ueda's avatar
      block: fix a possible oops on elv_abort_queue() · 53c663ce
      Kiyoshi Ueda authored 
      I found one more mis-conversion to the 'request is always dequeued
when completing' model in elv_abort_queue() during code inspection.
Although I haven't hit any problem caused by this mis-conversion yet
and just done compile/boot test, please apply if you have no problem.

Request must be dequeued when it completes.
However, elv_abort_queue() completes requests without dequeueing.
This will cause oops in the __blk_end_request_all().
This patch fixes the oops.
Signed-off-by: default avatarKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: default avatarJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      53c663ce
  3. 30 May, 2009 1 commit
  5. 28 May, 2009 1 commit
  7. 27 May, 2009 2 commits
    • Kiyoshi Ueda's avatar
      block: fix no diskstat problem · 3c4198e8
      Kiyoshi Ueda authored 
      The commit below in 2.6-block/for-2.6.31 causes no diskstat problem
because the blk_discard_rq() check was added with '&&'.
It should be 'blk_fs_request() || blk_discard_rq()'.
This patch does it and fixes the no diskstat problem.
Please review and apply.

------ /proc/diskstat without this patch -------------------------------------
   8       0 sda 0 0 0 0 0 0 0 0 0 0 0
------------------------------------------------------------------------------

----- /proc/diskstat with this patch applied ---------------------------------
   8       0 sda 4186 303 373621 61600 9578 3859 107468 169479 2 89755 231059
------------------------------------------------------------------------------

--------------------------------------------------------------------------
commit c69d4854
Author: Jens Axboe <jens.axboe@oracle.com>
Date:   Fri Apr 24 08:12:19 2009 +0200

    block: include discard requests in IO accounting

    We currently don't do merging on discard requests, but we potentially
    could. If we do, then we need to include discard requests in the IO
    accounting, or merging would end up decrementing in_flight IO counters
    for an IO which never incremented them.

    So enable accounting for discard requests.

<snip>

 static inline int blk_do_io_stat(struct request *rq)
 {
-       return rq->rq_disk && blk_rq_io_stat(rq) && blk_fs_request(rq);
+       return rq->rq_disk && blk_rq_io_stat(rq) && blk_fs_request(rq) &&
+               blk_discard_rq(rq);
 }
--------------------------------------------------------------------------
Signed-off-by: default avatarKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: default avatarJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      3c4198e8
    • James Bottomley's avatar
      block: fix oops with block tag queueing · ba396a6c
      James Bottomley authored 
      commit e8939a50466fd963eb1ba9118c34b9ffb7ff6aa6
Author: Tejun Heo <tj@kernel.org>
Date:   Fri May 8 11:54:16 2009 +0900

    block: implement and enforce request peek/start/fetch

Added a BUG_ON(blk_queued_rq(req)) to the top of blk_finish_req().
Unfortunately, this checks whether req->queuelist is empty.  This list
is doing double duty both as the queue list and the tag list, so tagged
requests come in here with this not empty and boom (the tag list is
emptied by blk_queue_end_tag() lower down).

Fix this by moving the BUG_ON to below the end tag we also seem
vulnerable to this in blk_requeue_request() as well.  I think all uses
of blk_queued_rq() need auditing because the check is clearly wrong in
the tagged case.
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      ba396a6c
  9. 23 May, 2009 1 commit
  11. 22 May, 2009 28 commits
  13. 21 May, 2009 2 commits
  15. 20 May, 2009 1 commit
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7