- 20 May, 2014 2 commits
-
-
Olof Johansson authored
Merge tag 'v3.16-rockchip-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "ARM: rockchip: devicetree changes for v3.16" from Heiko Stübner: Addition of missing board compatible names and their vendor-prefixes as well as the dts portions of the pinctrl rework. * tag 'v3.16-rockchip-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: convert pinctrl nodes to new bindings ARM: dts: rockchip: add root compatible properties of: add mundoreader and radxa vendor prefixes Signed-off-by:
Olof Johansson <olof@lixom.net>
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
Merge "ARM: mvebu: DT changes for v3.16" from Jason Cooper: mvebu DT changes for v3.16 - kirkwood - rework nsa3x0 board to add nsa320 - large cleanup to facilitate use in barebox - guruplug phy updates - audio updates for t5325 - mvebu - use clocks vice clock-frequency for uart nodes - armada 375/380/385 - add watchdog node - add coherency fabric - add smp support - add sdhci - add ahci - add thermal sensor - armada 370/XP - and pmsu * tag 'mvebu-dt-3.16' of git://git.infradead.org/linux-mvebu: (35 commits) ARM: Kirkwood: t5325: Use simple card to instantiate audio ARM: Kirkwood: DT: Add missing #sound-dai-cells property ARM: Kirkwood: Add node for audio codec ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id ARM: dts: kirkwood: set Guruplug ethernet PHY compatible ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282 ARM: dts: kirkwood: set default pinctrl for I2C0 ARM: dts: kirkwood: set default pinctrl for NAND ARM: dts: kirkwood: set default pinctrl for SPI0 ARM: dts: kirkwood: set default pinctrl for UART0/1 ARM: dts: kirkwood: set default pinctrl for GBE1 ARM: dts: kirkwood: consolidate common pinctrl settings ARM: dts: kirkwood: add pinctrl node to common SoC include ARM: dts: kirkwood: rename pin-controller nodes ARM: dts: kirkwood: remove clock-frequency properties from UART nodes ARM: dts: kirkwood: add stdout-path property to all boards ARM: dts: kirkwood: add node labels ARM: mvebu: Enable the thermal sensor in Armada 380/385 SoC ARM: mvebu: Enable the thermal sensor in Armada 375 SoC ARM: mvebu: don't use clocks property in UART node for Netgear RN2120 ... Signed-off-by:
-
- 16 May, 2014 1 commit
-
-
Olof Johansson authored
Merge tag 'socfpga-dt-updates-for-3.16_v3' of git://git.rocketboards.org/linux-socfpga-next into next/dt Merge "dts: socfpga: general updates for the socfpga platform" from Dinh Nguyen: Mostly DTS additions to the SOCFPGA platform from Steffan Trumtrar, and a couple of device tree documentation updates/typo fix. This one does not the GPIO binding patch, as that is pending further discussion. Also, v3 fixes a rebase artifact and compile tested. * tag 'socfpga-dt-updates-for-3.16_v3' of git://git.rocketboards.org/linux-socfpga-next: ARM: socfpga: dts: Add div-reg to the main_pll clocks ARM: socfpga: dts: add reset-controller Documentation: dt: reset: move socfpga-reset Documentation: dt: socfpga: add reset-cells property ARM: socfpga: dts: Add DTS entries for USB ARM: socfpga: dts: Remove hard coded clock-frequency property ARM: socfpga: dts: add eeprom and rtc on i2c0 ARM: socfpga: dts: convert to preprocessor includes ARM: socfpga: dts: add rtc on i2c0 to socrates ARM: socfpga: dts: add support for EBV SOCrates ARM: socfpga: dts: add can0+1 ARM: socfpga: dts: add i2c busses ARM: socfpga: dts: add remaining interrupts for pdma ARM: socfpga: dts: fix pdma interrupt Signed-off-by:
-
- 09 May, 2014 3 commits
-
-
Heiko Stuebner authored
Introduce the grf syscon and convert the pinctrl drivers for rk3066 and rk3188 to use it, instead of mapping the grf registers themselfs. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Max Schwarz <max.schwarz@online.de> Acked-by:
Linus Walleij <linus.walleij@linaro.org>
-
Beniamino Galvani authored
Add the missing 'compatible' property to device tree root node of - rk3066a-bqcurie2.dts - rk3188-radxarock.dts and document the new values. Signed-off-by:
Beniamino Galvani <b.galvani@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Beniamino Galvani authored
Add new vendor prefixes for: * Mundo Reader S.L., a company that produces tablets and e-readers * Radxa, manufacturer of ARM boards Signed-off-by:
-
- 06 May, 2014 15 commits
-
-
Dinh Nguyen authored
The mpu_clk, main_clk, and dbg_base_clk outputs from the main PLL go through a pre-divider. Update socfpga.dtsi to represent those dividers for these clocks. Re-use the "div-reg" property that was used for the socfpga-gate-clock as this is the same thing. Also update the documentation. Signed-off-by:Dinh Nguyen <dinguyen@altera.com>
-
Steffen Trumtrar authored
Add the necessary #reset-cells property to the rst-mgr node and provide a header-file with all possible resets specified. Signed-off-by:
Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by:
-
Steffen Trumtrar authored
Instead of having the documentation for the socfpga-reset controller in a vendor specific directory, move it to the reset folder to all the other reset drivers. Signed-off-by:
-
Steffen Trumtrar authored
To be able to use the reset-controller framework, the property #reset-cells is mandatory. Signed-off-by: -
Dinh Nguyen authored
Update all the SOCFPGA DTS files with USB entries. Signed-off-by: -
Dinh Nguyen authored
The timers and uart can get their clock frequencies using the common clock driver. Reviewed-by:
-
Dinh Nguyen authored
The Altera Cyclone5 and Arria5 devkit has an EEPROM and a RTC on the board. This patch adds support for them. Signed-off-by: -
Steffen Trumtrar authored
Convert all socfpga DT files to the dtc preprocessor include syntax. This allows to include header files in the devicetrees like other SoC-types already do. Signed-off-by:
-
Steffen Trumtrar authored
The SOCrates has an M41T82M RTC on i2c0. Add it. Signed-off-by:
-
Steffen Trumtrar authored
The SOCrates is a SOCFpga-Cyclone5 based board from EBV. Add support for it. Reviewed-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
-
Steffen Trumtrar authored
Add both can controllers to the dtsi. Reviewed-by:
-
Steffen Trumtrar authored
Add all 4 i2c busses. Signed-off-by:
-
Steffen Trumtrar authored
Signed-off-by:
-
Steffen Trumtrar authored
The first interrupt is not at 180 but 104. Fix it. Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-dt2-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Second Round of Renesas ARM Based SoC DT Updates for v3.16" from Simon Horman: * Add r8a7791 (R-Car M2) based Henninger board * tag 'renesas-dt2-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: henninger: enable SATA0 ARM: shmobile: henninger: add Ether DT support ARM: shmobile: henninger: initial device tree Signed-off-by:
-
- 05 May, 2014 19 commits
-
-
Olof Johansson authored
Merge tag 'renesas-dt-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Renesas ARM Based SoC DT Updates for v3.16" from Simon Horman: r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCs * Add MSIOF nodes and aliases * Correct I2C clock parents r8a7791 (R-Car M2) SoC * Add EHCI MSTP clock r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards * Add MSIOF nodes * Add gpio-keys support for SW2 * Enable I2C * Enable Quad SPI transfers for the SPI FLASH * Rename and lable spi to qspi, add spi0 alias * Set ethernet PHY LED mode r8a7779 (R-Car H1) and r8a7778 (R-Car M2) SoCs * Improve and correct HSPI nodes r8a7778 (R-Car M2) based Bock-W board * Add SPI FLASH r8a7740 (R-Mobile A1) SoC * Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings r8a7740 (R-Mobile A1) based Armadillo800 EVA board * Enable RTC * Use KEY_* macros for gpio-keys EMEV2 (Emma Mobile EV2) based kzm9g board * Use KEY_* macros for gpio-keys * tag 'renesas-dt-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits) ARM: shmobile: armadillo-reference dts: Seiko Instruments, Inc is "sii" ARM: shmobile: lager dts: Enable Quad SPI transfers for the SPI FLASH ARM: shmobile: koelsch dts: Enable Quad SPI transfers for the SPI FLASH ARM: shmobile: r8a7790: add IIC(B) cores to dtsi ARM: shmobile: r8a7790: add IIC(B) clocks to dtsi ARM: shmobile: r8a7790: add IIC0-2 clock macros ARM: shmobile: r8a7791: Fix the I2C clocks parents in DT ARM: shmobile: r8a7790: Fix the I2C clocks parents in DT ARM: shmobile: lager: Correct setting of ethernet PHY LED mode ARM: shmobile: armadillo-reference dts: enable RTC ARM: shmobile: r8a7791: Add EHCI MSTP clock ARM: shmobile: Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings ARM: shmobile: koelsch: activate i2c6 bus ARM: shmobile: koelsch: make i2c2-pfc node unique ARM: shmobile: r8a7791: add IIC(B) cores to dtsi ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi ARM: shmobile: r8a7791: add IIC0/1 clock macros ARM: shmobile: kzm9g-reference dts: Use KEY_* macros for gpio-keys ARM: shmobile: armadillo-reference dts: Use KEY_* macros for gpio-keys ARM: shmobile: koelsch: Set ethernet PHY LED mode ... Signed-off-by:
-
git://github.com/at91linux/linux-at91Olof Johansson authored
Merge "at91: DT for 3.16 #1" from Nicolas Ferre: 3.16: first DT series: - more support for at91sam9rl and its associated EK board - some improvements to at91sam9g45 (ADC, TS, PWM leds) - addition of some missing pieces for describing audio of SAMA5D3-EK in DT * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91: sama5d3: clock for ssc from rk pin ARM: at91: sama5d3: add the missing property ARM: at91: sama5d3: correct the sound compatible string ARM: at91: sama5d3: disable sound by default ARM: at91: sama5d3: add DMA property for SSC devices ARM: at91/dt: at91sam9m10g45ek PWM leds polarity is inversed ARM: at91/dt: at91sam9m10g45ek: add ADC and touchscreen support ARM: at91/dt: sam9g45: improve ADC/touchscreen support ARM: at91/dt: add peripherals to the at91sam9rlek board ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support Signed-off-by:
-
Andrew Lunn authored
Add device tree nodes to instantiate the audio drivers on the HP T5325 device. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1399141819-23924-8-git-send-email-andrew@lunn.chSigned-off-by:
Jason Cooper <jason@lakedaemon.net>
-
Andrew Lunn authored
The sound node is missing a #sound-dai-cells property. Add it, so that the sounds node can be used in combination with the simple-audio-card binding. Signed-off-by:
-
Andrew Lunn authored
Instantiate the audio codec via a DT node. Signed-off-by:
-
Linus Torvalds authored
-
Sebastian Hesselbarth authored
Ethernet PHYs found on Globalscale Guruplug are connected by RGMII-ID. Set the corresponding phy-connection-type property accordingly. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by:
-
Sebastian Hesselbarth authored
Ethernet PHY compatible shall be "ethernet-phy-ieee802.3-c22" and "ethernet-phy-idAAAA.BBBB" if PHY OUI id is known. We know it for the PHY found on Guruplug, so set it accordingly. Signed-off-by:
-
Sebastian Hesselbarth authored
Currently, the only 6282-based Kirkwood boards that use I2C1 are Openblocks A6/A7. Both use the same default I2C1 pinctrl setting from kirkwood-6282.dtsi. Move the pinctrl setting to the I2C1 node directly and put a note in front of the corresponding pinctrl node to overwrite the setting on board level. Signed-off-by:
-
Sebastian Hesselbarth authored
There is only one valid pinctrl setting for I2C0 on Kirkwood. Now that we have the setting in the common SoC pinctrl, move it to the I2C0 controller node directly and remove it from the individual boards. While at it, also fix up status = "okay" to "ok" on one board's I2C0 node. Signed-off-by:
-
Sebastian Hesselbarth authored
There is only one valid pinctrl setting for NAND on Kirkwood. Now that we have the setting in the common SoC pinctrl, move it to the NAND controller node directly and remove it from the individual boards. While at it, also fix up status = "okay" to "ok" on one board's NAND node. Signed-off-by:
-
Sebastian Hesselbarth authored
Most Kirkwood boards use the default SPI0 pinctrl setting anyway. Add a default pinctrl setting to the toplevel SoC SPI0 node and put a note in front of the corresponding pinctrl node to overwrite the setting on board level. Currently, only T5325 is using a different setting and already overwrites the corresponding pinctrl node. Signed-off-by:
-
Sebastian Hesselbarth authored
Most boards use the default UART0/1 pinctrl setting without RTS/CTS. Add the pinctrl setting to the toplevel SoC UART nodes and put a note in front of the corresponding pinctrl node to overwrite the setting on board level. Currently, both boards using a different UART pinctrl setting (Openblocks A6, A7) already overwrite the pinctrl node. While at it, also fix up some status = "ok" to "okay" and again whitespace issues on mplcec4 uart nodes. Signed-off-by:
-
Sebastian Hesselbarth authored
On Kirkwood, there is only one valid pinctrl setting for GBE1. With a common SoC pinctrl node, we can now set it in the node instead of in each board file. Signed-off-by:
-
Sebastian Hesselbarth authored
All SoCs have the same pinctrl setting for NAND, UART0/1, SPI, TWSI0, and GBE1. Move it to the common pinctrl node that we now have. Signed-off-by:
-
Sebastian Hesselbarth authored
All Kirkwood SoCs have their pinctrl registers at the same address. Instead of replaying the same reg property on each SoC, have the reg property set in the common SoC file already. This also allows us to move common pinctrl settings to this node later on. Signed-off-by:
-
Sebastian Hesselbarth authored
To prepare pin-controller consolidation, first rename all pinctrl nodes to a more appropriate name regarding ePAPR recommended names. Signed-off-by:
-
Sebastian Hesselbarth authored
UART devices found on Kirkwood SoCs derive their baudrate from TCLK. With proper clocks property in the SoCs serial node, boards do not need to overwrite it anymore. Remove the remaining clock-frequency property from all Kirkwood boards. Signed-off-by:
-
Sebastian Hesselbarth authored
ePAPR allows to reference the device used for console output by stdout-path property. With node labels for Kirkwood UART0, now reference it on all Kirkwood boards that already have ttyS0 in their bootargs property. While at it, fix some whitespace issues on mplcec4's chosen node (there are more, but we only fix the chosen node now) Signed-off-by:
-
