The second ethernet port on the Thecus n2100 was incorrectly assigned
to XINT1 instead of the correct XINT3 (PCI INTB instead of INTD), which
caused that port to be non-functional.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add support for KBUILD_IMAGE on ARM.  This takes the usual target
specifiers (zImage/Image/etc) in the same way that powerpc does
(iow, without the arch/arm/boot prefix).
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The PXA2xx PCMCIA driver was registering a device_driver with the
platform_bus_type.  Unfortunately, this causes data outside the
device_driver structure to be dereferenced as if it were a
platform_driver structure, causing an oops.  Convert the PXA2xx
core driver to use the proper platform_driver structure.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

i2c-pxa times out when trying to enable slave mode due to an
incorrect test.  Also, check that i2c->slave is non-NULL
before dereferencing it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The SIGFPE signal should be generated if Division by Zero exception is detected.
Signed-off-by: Takashi Ohmasa <ohmasa.takashi@jp.panasonic.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The significand should be shifted until the value of bit [62] is 1
to normalize the denormal double number.
Signed-off-by: Takashi Ohmasa <ohmasa.takashi@jp.panasonic.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

According to Daniel Jacobowitz, UNWIND_INFO is not useful on ARM, and
in fact doesn't even compile.

This patch disables the option for ARM.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The IRQ changes a while back broke the build for SMP machines.
Fix up the SMP code to use set_irq_regs/get_irq_regs as
appropriate.  Also, fix a warning in arch/arm/kernel/time.c
where 'regs' becomes unused for SMP builds.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC]: Fix bus_id[] string overflow.

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Remove quirk_via_abnormal_poweroff
  PCI: reset pci device state to unknown state for resume
  PCI: x86-64: mmconfig missing printk levels
  PCI: fix pci_fixup_video as it blows up on sparc64
  acpiphp: fix latch status

Add description of 'raw' in comments for
drivers/mtd/nand/nand_base.c::nand_write_page_syndrome() so 'make xmldocs'
will not spew a warning at us.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The multithreaded-probing code has a problem: after one initcall level (eg,
core_initcall) has been processed, we will then start processing the next
level (postcore_initcall) while the kernel threads which are handling
core_initcall are still executing.  This breaks the guarantees which the
layered initcalls previously gave us.

IOW, we want to be multithreaded _within_ an initcall level, but not between
different levels.

Fix that up by causing the probing code to wait for all outstanding probes at
one level to complete before we start processing the next level.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add a vmlinux.lds.h helper macro for defining the eight-level initcall table,
teach all the architectures to use it.

This is a prerequisite for a patch which performs initcall synchronisation for
multithreaded-probing.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
[ Added AVR32 as well ]
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

My K8T800 mobo resumes fine from suspend to ram with and without patch
applied against 2.6.18.

quirk_via_abnormal_poweroff makes some boards not boot 2.6.18, so IMO patch
should go to head, 2.6.18.2 and everywhere "ACPI: ACPICA 20060623" has been
applied.


Remove quirk_via_abnormal_poweroff

Obsoleted by "ACPI: ACPICA 20060623":
<snip>
    Implemented support for "ignored" bits in the ACPI
    registers.  According to the ACPI specification, these
    bits should be preserved when writing the registers via
    a read/modify/write cycle. There are 3 bits preserved
    in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9],
    and PM1_STATUS[11].
    http://bugzilla.kernel.org/show_bug.cgi?id=3691
</snip>
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Bob Moore <robert.moore@intel.com>
Cc: "Brown, Len" <len.brown@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Considering below scenario:
1.Unload a PCI device's driver, the device ->current remains in PCI_D0.
2.Do suspend/resume circle. After that, BIOS puts the device to D3.
3.Reload the device driver. The calling pci_set_power_state in the
driver can't change the state to D0, as set_power_state thinks the
device is already in D0.

A bug is reported at http://bugzilla.kernel.org/show_bug.cgi?id=6024
Pat attached a patch at
http://marc.theaimsgroup.com/?l=linux-pci&m=114049761428561&w=2 for this
issue, but it's lost. As pci_set_power_state can handle D3 -> D0
correctly (restore config space), I simplified Patrick's patch.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This reverts much of the original pci_fixup_video change and makes it
work for all arches that need it.

fixed, and tested on x86, x86_64 and IA64 dig.
Signed-off-by: Eiichiro Oiwa <eiichiro.oiwa.nm@hitachi.com>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

pci_hotplug.h says:

 * @latch_status: if the latch (if any) is open or closed (1/0)

However, acpiphp returns opposite value.
This patch fixes this issue.

I tested this patch on my ia64 machine that has some apciphp based
hotplug slots.
Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

dp->path_component_name can be larger than ->bus_id[]
so use a different naming scheme for this stuff.

Noticed by Jurij Smakov.
Signed-off-by: David S. Miller <davem@davemloft.net>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix memory corruption in pci_4u_free_consistent().
  [SPARC64]: Fix central/FHC bus handling on Ex000 systems.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [BRIDGE]: correct print message typo
  [TCP] H-TCP: fix integer overflow
  [TCP] cubic: scaling error

Correct message typo/spello.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using H-TCP with a single flow on a 500Mbit connection (or less
actually), alpha can exceed 65000, so alpha needs to be a u32.
Signed-off-by: Gavin McCullagh <gavin.mccullagh@nuim.ie>
Signed-off-by: Doug Leith <doug.leith@nuim.ie>
Signed-off-by: David S. Miller <davem@davemloft.net>

Doug Leith observed a discrepancy between the version of CUBIC described
in the papers and the version in 2.6.18. A math error related to scaling
causes Cubic to grow too slowly.

Patch is from "Sangtae Ha" <sha2@ncsu.edu>. I validated that
it does fix the problems.

See the following to show behavior over 500ms 100 Mbit link.

Sender (2.6.19-rc3) ---  Bridge (2.6.18-rt7) ------- Receiver (2.6.19-rc3)
                    1G      [netem]           100M

	http://developer.osdl.org/shemminger/tcp/2.6.19-rc3/cubic-orig.png
	http://developer.osdl.org/shemminger/tcp/2.6.19-rc3/cubic-fix.pngSigned-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The second argument to free_npages() was being incorrectly
calculated, which would thus access far past the end of the
arena->map[] bitmap.
Signed-off-by: David S. Miller <davem@davemloft.net>

1) probe_other_fhcs() wants to see only non-central FHC
   busses, so skip FHCs that don't sit off the root

2) Like SBUS, FHC can lack the appropriate address and
   size cell count properties, so add an of_busses[]
   entry and handlers for that.

3) Central FHC irq translator probing was buggy.  We
   were trying to use dp->child in irq_trans_init but
   that linkage is not setup at this point.

   So instead, pass in the parent of "dp" and look for
   the child "fhc" with parent "central".

Thanks to the tireless assistence of Ben Collins in tracking
down these problems and testing out these fixes.
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'upstream-fixes' of git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream-fixes

Sync atstk1002_defconfig with latest git, turn off non-existent
drivers and enable a few more userspace-visible options like
SysV IPC and inotify support.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The read[bwl] and write[bwl] functions are meant for accessing PCI
devices. How this is achieved on AVR32 is unknown, as there are no
systems with a PCI bridge available yet.

On-chip peripheral access, however, should not depend on how we end
up implementing PCI access, so using __raw_read[bwl]/__raw_write[bwl]
is the right thing to do for on-chip peripherals. This patch converts
the drivers for the static memory controller, interrupt controller,
PIO controller and system manager to use __raw MMIO access.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Implement __raw_readsb and __raw_writesb. Export __raw_reads[bwl]
and __raw_writes[bwl] for use by modules.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A number of new drivers require io{read,write}{8,16,32}{be,} family of io
operations.  These are provided for the AVR32 by this patch in the form of
a series of macros.

Access to the (memory mapped) io space through these macros is defined to
be little endian only as little endian devices (such as PCI) are the main
consumer of IO access.  If high speed access is required,
io{read,write}{16,32}be macros are supplied to perform native big endian
access to this io space.
Signed-off-by: Ben Nizette <ben@mallochdigital.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When calling e.g. atomic_sub_return with a large constant, the
compiler may output an immediate that is too large for the sub
instruction in the middle of the loop.

Fix this by explicitly specifying the number of bits allowed in the
constraint. Also stop atomic_add_return() and friends from falling
back to their respective "sub" variants if the constant is too large
to fit in an immediate.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

While ioremap() will happily map a physical address through the
P2 (uncached) segment when appropriate, iounmap() doesn't know how
to handle those mappings.

This patch makes iounmap() do the right thing, i.e. nothing, for
such mappings.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Silence a few compile warnings which are basically harmless, but
easy to fix.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Don't generate listing by default, remove unused LIBGCC variable and
rename generated disassembly and listing files to vmlinux.{s,lst}.

Also make sure that files generated during the build are actually
removed with make clean.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (40 commits)
  [SCSI] aic79xx: Print out signalling
  [SCSI] aic7xxx: Remove slave_destroy
  [SCSI] aic79xx: set precompensation
  [SCSI] aic79xx: Fixup external device reset
  [SCSI] replace u8 and u32 with __u8 and __u32 in scsi.h for user space
  [SCSI] lpfc: fix printk format warning
  [SCSI] aic79xx: make ahd_set_tags() static
  [SCSI] aic7xxx: cleanups
  [SCSI] drivers/scsi: Handcrafted MIN/MAX macro removal
  [SCSI] scsi_debug: support REPORT TARGET PORT GROUPS
  [SCSI] qla1280 bus reset typo
  [SCSI] libiscsi: fix logout pdu processing
  [SCSI] libiscsi: fix aen support
  [SCSI] libiscsi: fix missed iscsi_task_put in xmit error path
  [SCSI] libiscsi: fix oops in connection create failure path
  [SCSI] iscsi class: fix slab corruption during restart
  [SCSI] Switch fdomain to the pci_get API
  [SCSI] add can_queue to host parameters
  [SCSI] megaraid_{mm,mbox}: 64-bit DMA capability fix
  [SCSI] aic94xx: Supermicro motherboards support
  ...

* 'intelfb-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/intelfb-2.6:
  Remove unnecessary check in drivers/video/intelfb/intelfbhw.c
  intel fb: switch to pci_get API

* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: ioremap balanced with iounmap for drivers/char/drm
  drm: fix error returns, sysfs error handling
  fix return code in error case.
  drm: mga: set dev_priv_size
  drm: savage: dev->agp_buffer_map is not initialized for AGP DMA on savages
  drm: radeon: only allow specific type-3 packetss through verifier