- 04 Apr, 2011 34 commits
-
-
Bing Zhao authored
These macros are leftover of previous cleanup patches. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bing Zhao authored
struct mwifiex_802_11_fixed_ies is not necessary. struct mwifiex_event_wep_icv_err is not used any more. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Marc Yang authored
remove redundant structures and unused macros Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bing Zhao authored
IEEE Std 802.11n, Oct. 29, 2009: 7.3.2.56.5 HT Extended Capabilities field Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Marc Yang authored
These definitions are no longer used after previous cleanups. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Marc Yang authored
The radio_on variable is defined but never used. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Marc Yang authored
replace them with NL80211_AUTHTYPE_ macros Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bing Zhao authored
replace them with NL80211_IFTYPE_ macros Also remove redundant functions mwifiex_drv_get_mode() and mwifiex_bss_ioctl_mode(). Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
We already tell mac80211 to stop the queue when we hit a certain threshold. Hence, it shouldn't happen at all that a frame gets queued for tx on a full queue. Add an error message for this case. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Some clients seem to rely upon the reception of BlockAckReqs to flush their rx reorder buffer. In order to fix aggregation for these clients rt2x00 should send a BlockAckReq if the transmission of an AMPDU subframe fails. Introduce a new flag TXDONE_AMPDU to indicate that this is an AMPDU subframe and pass IEEE80211_TX_STAT_AMPDU_NO_BACK to mac80211 if an AMPDU subframe failed during transmission. This fixes aggregation problems with Intel 5100 Windows STAs (and maybe others as well). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ivo van Doorn authored
Add new USB ID Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
For STBC transmissions rt2x00 used the number of RxSTBC streams the destination STA indicates in its HT capabilities as STBC value in the TXWI. However, the legacy drivers and our own comment in rt2800.h suggest that the STBC field in the TXWI only allows a value of 0 or 1. The values 2 and 3 are reserved (probably for future devices). And indeed, STBC transmissions to STAs indicating more then 1 RxSTBC stream fail when the STBC field is set to something >1. Fix this by only setting the STBC field to 1 when STBC should be used. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
rt2800 devices should adjust their tx power in accordance with the eeproms temperature calibration values. Add a new driver callback gain_calibration that is called every 4 seconds. The rt2800 gain calibration routine simply runs the tx power configuration that takes care of calculating the temperature compensation delta. We don't need to synchronize the calls to rt2800_config_txpower as they should all happen from mac80211's single threaded workqueue. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Since commit d1c3a37c ("mac80211: clarify alignment docs, fix up alignment") removed the requirement for a 4-byte aligned payload rt2x00queue_align_payload is obsolete as mac80211 will align the payload when it passes the frame to the net stack. As a result we can remove the call to rt2x00queue_align_payload in the rx path and since that's the last user we can remove rt2x00queue_align_payload altogether. One advantage is that we save some alignment operations for frames that don't need to be aligned (for example beause they are not passed to the net stack). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Fix the indention in rt2800_compesate_txpower and also fix a typo in the function name rt2800_compesate_txpower -> rt2800_compensate_txpower. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Previously the HT40 tx power compensation value was calculated for each rate. However, the calculation is independent of the tx rate and as such can be precalculated and just passed in for each rate. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Move the HT40 check inside the calculation function to make it easier for a later cleanup. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
We can simply check if the driver registered the watchdog callback. There's no need to have an additional flag for that. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Instead of hardcoding the tx status fifo size as 512 calculate it based on the number of tx queues and the number of entries per queue. Also round the size up to a power of 2 as kfifo would otherwise round it down. On rt2800pci this will increase the kfifo size from 512 bytes to 1024 bytes which is then able to hold the tx status for all entries in all tx queues. Furthermore, if the number of tx queues or tx entries changes in the future (use of the MGMT queue for example) the kfifo size doesn't need to be updated. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Instead of reporting an unlimited number of tx status reports to mac80211 stop after 16 frames and reschedule the tx status tasklet. This allows other tasklets to be run inbetween. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Instead of receiving an unlimited number of frames, stop after 16 entries and reschedule the rxdone tasklet. This allows other tasklets to be run inbetween. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Remove some unused variables and correct spelling errors. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Marc Yang authored
The hw_dot_11n_dev_cap reported by firmware hw_spec has different format than the 11n capabilities. Hence a lot of SET_ and RESET_ bit operation macros were used to convert the dev_cap format to 11n capability format. However the locally defined 11n ht_cap macros are not necessary as we can use IEEE80211_HT_CAP_ macros directly. The 32-bit dev_cap bitmap is added as comment to explain the mapping between firmware and 11n spec. Some unused macros and unnecessary adapter variables are also removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bing Zhao authored
and SHORT_SLOT_TIME_ENABLED. Use WLAN_CAPABILITY_SHORT_SLOT_TIME instead. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
The only thing that using crypto_blkcipher with ecb does over just using arc4 directly is wrapping the encrypt/decrypt function into a for loop, looping over each individual character. To be able to do this, it pulls in around 40 kb worth of unnecessary kernel modules (at least on a MIPS embedded device). Using arc4 directly not only eliminates those dependencies, it also makes the code smaller. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Marc Yang authored
mwifiex_set_encrypt_mode() mwifiex_set_auth_mode() mwifiex_set_auth() These functions are confusing and misleading. And they are really not needed at all. Some unused definitions are also removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Yogesh Ashok Powar authored
'iw list' is sufficient to retrieve the information which was displayed by these functions. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
The commit "mac80211: reply to directed probes in IBSS" changed ad-hoc specific code to respond to unicast probe requests, even if drv_tx_last_beacon returns false, however due to confusion over the meaning of the IEEE80211_RX_RA_MATCH flag, it also unconditionally enabled responding to multicast probe requests. Fix this by explicitly checking for a multicast destination address instead. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
This function is nowhere used. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
This does not seems to be used anywhere so remove it. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ben Greear authored
Aids debugging wifi behaviour. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Add iwlegacy driver to MAINTAINERS. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
-
- 30 Mar, 2011 6 commits
-
-
Felix Fietkau authored
It has the same purpose (and value) as ah->config.max_txtrig_level Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
It is not used anywhere Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
Similar to the number of tx queue, the number of keycache entries depends on the chip and shouldn't be messed with based on EEPROM data. Remove this field and stick to using AR_KEYTABLE_SIZE Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
It is not used anywhere and seems pointless Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
It is only used in one place, and the device id check that it's based on can be moved there as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
The EEPROM contains a field that can restrict the number of hardware queues, however this is not only useless (all the known chips contain the same number of hardware queues), but also potentially dangerous in case of a misprogrammed EEPROM (could trigger driver crashes), so let's just ignore it completely. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-