- 02 Apr, 2015 40 commits
-
-
Lad, Prabhakar authored
this patch adds support for VIDIOC_EXPBUF. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Lad, Prabhakar authored
this patch adds support for VB2_DMABUF. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support for vidioc_create_bufs. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to return -ENODATA for *dv_timings calls if the current output does not support it. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds supports to return -ENODATA to *_std calls if the selected output does not support it. Signed-off-by:
-
Lad, Prabhakar authored
[media] media: blackfin: bfin_capture: make sure all buffers are returned on stop_streaming() callback In start_streaming() callback the buffer is removed from the dma_queue list and assigned to cur_frm, this patch makes sure that is returned to vb2 core with VB2_BUF_STATE_ERROR flag. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to vb2_ioctl_* helpers. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to use v4l2_fh_open() and vb2_fop_release, which allows to drop driver specific struct bcap_fh, as this is handled by core. Signed-off-by:
-
Lad, Prabhakar authored
No need to reinvent the wheel. Just use the already existing functions provided by vb2. Signed-off-by:
-
Lad, Prabhakar authored
This patch does the following: a: returns -EINVAL in case format image size is less then current image size. b: assigns nbuffers to two in case the total of vq->num_buffers and nbuffers is less then the number of buffers required by driver. c: sets the sizes[0] of plane according to the fmt passed or which is being set in the device. Signed-off-by:
-
Lad, Prabhakar authored
set the vb2 buffer field in buf_prepare() callback, alongside drop local variable buf as we already have a pointer to vb2 buffer. Signed-off-by:
-
Lad, Prabhakar authored
this patch sets the min_buffers_needed field of the vb2 queue so that the vb2 core will make sure start_streaming() callback is called only when we have minimum buffers queued. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to release the buffer by calling vb2_buffer_done(), with state marked as VB2_BUF_STATE_QUEUED if start_streaming() call back fails. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops the buf_init() callback as init of buf list is not required. Signed-off-by:
-
Hans Verkuil authored
According to the standard the R'G'B' BT.2020 colorspace is limited range, not full range. Fix this. Signed-off-by:
-
Hans Verkuil authored
The quantization comment in the header was incorrect w.r.t. BT.2020. Fix this. Signed-off-by:
-
Hans Verkuil authored
In contrast to all other colorspaces, the BT.2020 colorspace uses limited range R'G'B' quantization as the default. This was incorrected documented, so fix this. Signed-off-by:
-
Hans Verkuil authored
The denominator for the scaling and offsets is 256, not 255. Fix this. Signed-off-by:
-
Hans Verkuil authored
Make sure the format fields are reported consistently. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
The debug attribute was renamed to dev_debug. Update the doc accordingly. Signed-off-by:
-
Lad, Prabhakar authored
Embed video_device struct (video_dev) in vpfe_device and Unregister path doesn't need to free the video_device structure, hence, change the video_device.release callback point to video_device_release_empty. Signed-off-by:
-
Lad, Prabhakar authored
return error in case devm_kzalloc() fails. Signed-off-by:
-
Lad, Prabhakar authored
Instead of matching the subdevs with their name, match it with OF node/ i2c address and adapter number. Signed-off-by:
-
Tapasweni Pathak authored
Check for dev_fmt being null before derefrencing it, to assign it to planes. Found using Coccinelle. Signed-off-by:
Tapasweni Pathak <tapaswenipathak@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Masatake YAMATO authored
In am437x-vpfe.h BASE_VIDIOC_PRIVATE is used for making the name of ioctl command(VIDIOC_AM437X_CCDC_CFG). The definition of BASE_VIDIOC_PRIVATE is in linux/videodev2.h. However, linux/videodev2.h is not included in am437x-vpfe.h. As the result an application using has to include both am437x-vpfe.h and linux/videodev2.h. With this patch, the application can include just am437x-vpfe.h. Signed-off-by:
Masatake YAMATO <yamato@redhat.com> Acked-by:
-
Hans Verkuil authored
Return -EINVAL if read() or write() is not supported by the queue. This makes it possible to provide both vb2_fop_read and vb2_fop_write in a struct v4l2_file_operations since the vb2_fop_* function will check if the file operation is allowed. A similar check exists in __vb2_init_fileio() which is called from __vb2_perform_fileio(), but that check is only done if no file I/O is active. So the sequence of read() followed by write() would be allowed, which is obviously a bug. In addition, vb2_fop_write/read should always return -EINVAL if the operation is not allowed, and by putting the check in the lower levels of the code it is possible that other error codes are returned (EBUSY or ERESTARTSYS). All these issues are avoided by just doing a quick explicit check. Signed-off-by:
-
Laurent Pinchart authored
The remote port reference is released both at the end of the OF graph parsing loop, and in the error code path at the end of the function. Those two calls will release the same reference, causing the reference count to go negative. Fix the problem by removing the second call. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
Laurent Pinchart authored
Frame intervals exposed as an interval and step (so-called step-wise) are restricted by the V4L2 API to a single enumeration entry. Return an error when the index is not zero. Reported-by:
Alexey Smirnoff <fling@member.fsf.org> Signed-off-by:
-
Laurent Pinchart authored
The device is based on an Aveo chipset, implements UVC but advertises a vendor-specific class on all interfaces. Support it by listing the USB VID:PID explicitly. Signed-off-by:
-
Laurent Pinchart authored
videobuf2 has long been subject to AB-BA style deadlocks due to the queue lock and mmap_sem being taken in different orders for the mmap and get_unmapped_area operations. The problem has been fixed by making those two operations callable without taking the queue lock, using an mmap_lock internal to videobuf2. The uvcvideo driver still calls the mmap and get_unmapped_area operations with the queue lock held, resulting in a potential deadlock. As the operations can now be called without locking the queue, fix it. Reported-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Sakari Ailus authored
pixel_order_str is only referred to in smiapp-core.c, it should be thus static. Thanks to Hans Verkuil for pointing this out. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Sakari Ailus authored
of_property_read_u64_array() wasn't yet part of the kernel tree when the functionality was needed. Do use it now. Signed-off-by:
-
Sakari Ailus authored
This reverts commit cb88d738. Signed-off-by:
-
Marek Szyprowski authored
Unsigned int cannot be used to store casted pointer on 64bit architecture, so correct such casts to properly use unsigned long variables. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> [k.debski@samsung.com: removed volatile and __iomem from cast] Signed-off-by:
-
Marek Szyprowski authored
TASK_SIZE is depends on the systems architecture (32 or 64 bits) and it should not be used for defining offset boundary for mmaping buffers for CAPTURE and OUTPUT queues. This patch fixes support for MMAP calls on the CAPTURE queue on 64bit architectures (like ARM64). Signed-off-by:
-
Sakari Ailus authored
Print a warning when the driver is used with platform data. Existing platform data users should move to DT now. Signed-off-by:
-
Sakari Ailus authored
Add the ISP device to omap3 DT include file and add support to the driver to use it. Also obtain information on the external entities and the ISP configuration related to them through the Device Tree in addition to the platform data. Signed-off-by:
-
Sakari Ailus authored
Add lane_polarities field to struct v4l2_of_bus_mipi_csi2 and write the contents of the lane-polarities property to it. The field tells the polarity of the physical lanes starting from the first one. Any unused lanes are ignored, i.e. only the polarity of the used lanes is specified. Also rework reading the "data-lanes" property a little. Signed-off-by:
-
Sakari Ailus authored
Add lane-polarity property to endpoint nodes. This essentially tells that the order of the differential signal wires is inverted. Signed-off-by:
-
Sakari Ailus authored
The omap3isp MMIO register block is contiguous in the MMIO register space apart from the fact that the ISP IOMMU register block is in the middle of the area. Ioremap it at two occasions, and keep the rest of the layout of the register space internal to the omap3isp driver. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
