Pull more clk framework updates from Stephen Boyd:
 "One more patch to remove io.h from clk-provider.h.

  We used to need this include when we had clk_readl() and clk_writel(),
  but those are gone now so this patch pushes the dependency out to the
  users of clk-provider.h"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Remove io.h from clk-provider.h

Pull cgroup fix from Tejun Heo:
 "The cgroup2 freezer pulled in this cycle broke strace. This pull
  request includes a workaround for the problem.

  It's not a complete fix in that it may cause spurious frozen state
  flip-flops which is fairly minor. Will push a full fix once it's
  ready"

* 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  signal: unconditionally leave the frozen state in ptrace_stop()

Merge tag 'linux-kselftest-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull more kselftest updates from Shuah Khan:

 - kselftest framework bpf build/test workflow regression fix

 - Fix to kselftest install to use default install path

 - Fix to kselftest KBUILD_OUTPUT builds to not clutter main
   KBUILD_OUTPUT directory with selftest objects

 - .gitignore fixes (Kelsey Skunberg)

 - rseq selftests updates (Mathieu Desnoyers and Martin Schwidefsky)

   They change the per-architecture pre-abort signatures to ensure those
   are valid trap instructions.

   The way exit points are presented to debuggers is enhanced, ensuring
   all exit points are present, so debuggers don't have to disassemble
   rseq critical section to properly skip over them.

   Discussions with the glibc community is reaching a consensus of
   exposing a __rseq_handled symbol from glibc to coexist with rseq
   early adopters. Update the rseq selftest code to expose and use this
   symbol.

   Support for compiling asm goto with clang is added with the
   "-no-integrated-as" compiler switch, similarly to the top level
   kernel Makefile.

 - kselftest Makefile test run output refactoring and making test output
   TAP13 compliant from Kees Cook:

   This re-factors the selftest Makefiles to extract the test running
   logic to be reused between "run_tests" and "emit_tests", while also
   fixing up the test output to be TAP version 13 compliant:
	- added "plan" line
	- fixed result line syntax
	- moved all test output to be "# "-prefixed as TAP "diagnostic"
	  lines

   The prefixing code includes a fallback mode for limited execution
   environments.

   Additionally, the plan lines are fixed for all callers of
   kselftest.h.

* tag 'linux-kselftest-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
  selftests: avoid KBUILD_OUTPUT dir cluttering with selftest objects
  selftests: drivers: Create .gitignore to include /dma-buf/udmabuf
  selftests: pidfd: Create .gitignore to include pidfd_test
  selftests: fix bpf build/test workflow regression when KBUILD_OUTPUT is set
  selftests: fix install target to use default install path
  rseq/selftests: add -no-integrated-as for clang
  rseq/selftests: mips: use break instruction for RSEQ_SIG
  rseq/selftests: powerpc code signature: generate valid instructions
  rseq/selftests: aarch64 code signature: handle big-endian environment
  rseq/selftests: arm: use udf instruction for RSEQ_SIG
  rseq/selftests: s390: use trap4 for RSEQ_SIG
  rseq/selftests: x86: use ud1 instruction as RSEQ_SIG opcode
  rseq/selftests: s390: use jg instruction for jumps outside of the asm
  rseq/selftests: Use __rseq_handled symbol to coexist with glibc
  rseq/selftests: Introduce __rseq_cs_ptr_array, rename __rseq_table to __rseq_cs
  rseq/selftests: Add __rseq_exit_point_array section for debuggers
  rseq/selftests: x86: Work-around bogus gcc-8 optimisation
  selftests: Add test plan API to kselftest.h and adjust callers
  selftests: Remove KSFT_TAP_LEVEL
  selftests: Move test output to diagnostic lines
  ...

Pull Devicetree vendor prefix conversion from Rob Herring:
 "Conversion of vendor-prefixes.txt to json-schema"

* tag 'devicetree-for-5.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Convert vendor prefixes to json-schema

Pull AFS callback promise fixes from David Howells:
 "This series fixes a bunch of problems in callback promise handling,
  where a callback promise indicates a promise on the part of the server
  to notify the client in the event of some sort of change to a file or
  volume. In the event of a break, the client has to go and refetch the
  client status from the server and discard any cached permission
  information as the ACL might have changed.

  The problem in the current code is that changes made by other clients
  aren't always noticed, primarily because the file status information
  and the callback information aren't updated in the same critical
  section, even if these are carried in the same reply from an RPC
  operation, and so the AFS_VNODE_CB_PROMISED flag is unreliable.

  Arranging for them to be done in the same critical section during
  reply decoding is tricky because of the FS.InlineBulkStatus op - which
  has all the statuses in the reply arriving and then all the callbacks,
  so they have to be buffered. It simplifies things a lot to move the
  critical section out of the decode phase and do it after the RPC
  function returns.

  Also new inodes (either newly fetched or newly created) aren't
  properly managed against a callback break happening before we get the
  local inode up and running.

  Fix this by:

   - There's now a combined file status and callback record (struct
     afs_status_cb) to carry both plus some flags.

   - Each operation wrapper function allocates sufficient afs_status_cb
     records for all the vnodes it is interested in and passes them into
     RPC operations to be filled in from the reply.

   - The FileStatus and CallBack record decoders no longer apply the
     new/revised status and callback information to the inode/vnode at
     the point of decoding and instead store the information into the
     record from (2).

   - afs_vnode_commit_status() then revises the file status, detects
     deletion and notes callback information inside of a single critical
     section. It also checks the callback break counters and cancels the
     callback promise if they changed during the operation.

     [*] Note that "callback break counters" are counters of server
     events that cancel one or more callback promises that the client
     thinks it has. The client counts the events and compares the
     counters before and after an operation to see if the callback
     promise it thinks it just got evaporated before it got recorded
     under lock.

   - Volume and server callback break counters are passed into
     afs_iget() allowing callback breaks concurrent with inode set up to
     be detected and the callback promise thence to be cancelled.

   - AFS validation checks are now done under RCU conditions using a
     read lock on cb_lock. This requires vnode->cb_interest to be made
     RCU safe.

   - If the checks in (6) fail, the callback breaker is then called
     under write lock on the cb_lock - but only if the callback break
     counter didn't change from the value read before the checks were
     made.

   - Results from FS.InlineBulkStatus that correspond to inodes we
     currently have in memory are now used to update those inodes'
     status and callback information rather than being discarded. This
     requires those inodes to be looked up before the RPC op is made and
     all their callback break values saved.

  To aid in this, the following changes have also been made:

   - Don't pass the vnode into the reply delivery functions or the
     decoders. The vnode shouldn't be altered anywhere in those paths.
     The only exception, for the moment, is for the call done hook for
     file lock ops that wants access to both the vnode and the call -
     this can be fixed at a later time.

   - Get rid of the call->reply[] void* array and replace it with named
     and typed members. This avoids confusion since different ops were
     mapping different reply[] members to different things.

   - Fix an order-1 kmalloc allocation in afs_do_lookup() and replace it
     with kvcalloc().

   - Always get the reply time. Since callback, lock and fileserver
     record expiry times are calculated for several RPCs, make this
     mandatory.

   - Call afs_pages_written_back() from the operation wrapper rather
     than from the delivery function.

   - Don't store the version and type from a callback promise in a reply
     as the information in them is of very limited use"

* tag 'afs-fixes-b-20190516' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix application of the results of a inline bulk status fetch
  afs: Pass pre-fetch server and volume break counts into afs_iget5_set()
  afs: Fix unlink to handle YFS.RemoveFile2 better
  afs: Clear AFS_VNODE_CB_PROMISED if we detect callback expiry
  afs: Make vnode->cb_interest RCU safe
  afs: Split afs_validate() so first part can be used under LOOKUP_RCU
  afs: Don't save callback version and type fields
  afs: Fix application of status and callback to be under same lock
  afs: Always get the reply time
  afs: Fix order-1 allocation in afs_do_lookup()
  afs: Get rid of afs_call::reply[]
  afs: Don't pass the vnode pointer through into the inline bulk status op

Pull misc AFS fixes from David Howells:
 "This fixes a set of miscellaneous issues in the afs filesystem,
  including:

   - leak of keys on file close.

   - broken error handling in xattr functions.

   - missing locking when updating VL server list.

   - volume location server DNS lookup whereby preloaded cells may not
     ever get a lookup and regular DNS lookups to maintain server lists
     consume power unnecessarily.

   - incorrect error propagation and handling in the fileserver
     iteration code causes operations to sometimes apparently succeed.

   - interruption of server record check/update side op during
     fileserver iteration causes uninterruptible main operations to fail
     unexpectedly.

   - callback promise expiry time miscalculation.

   - over invalidation of the callback promise on directories.

   - double locking on callback break waking up file locking waiters.

   - double increment of the vnode callback break counter.

  Note that it makes some changes outside of the afs code, including:

   - an extra parameter to dns_query() to allow the dns_resolver key
     just accessed to be immediately invalidated. AFS is caching the
     results itself, so the key can be discarded.

   - an interruptible version of wait_var_event().

   - an rxrpc function to allow the maximum lifespan to be set on a
     call.

   - a way for an rxrpc call to be marked as non-interruptible"

* tag 'afs-fixes-20190516' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix double inc of vnode->cb_break
  afs: Fix lock-wait/callback-break double locking
  afs: Don't invalidate callback if AFS_VNODE_DIR_VALID not set
  afs: Fix calculation of callback expiry time
  afs: Make dynamic root population wait uninterruptibly for proc_cells_lock
  afs: Make some RPC operations non-interruptible
  rxrpc: Allow the kernel to mark a call as being non-interruptible
  afs: Fix error propagation from server record check/update
  afs: Fix the maximum lifespan of VL and probe calls
  rxrpc: Provide kernel interface to set max lifespan on a call
  afs: Fix "kAFS: AFS vnode with undefined type 0"
  afs: Fix cell DNS lookup
  Add wait_var_event_interruptible()
  dns_resolver: Allow used keys to be invalidated
  afs: Fix afs_cell records to always have a VL server list record
  afs: Fix missing lock when replacing VL server list
  afs: Fix afs_xattr_get_yfs() to not try freeing an error value
  afs: Fix incorrect error handling in afs_xattr_get_acl()
  afs: Fix key leak in afs_release() and afs_evict_inode()

Pull ceph updates from Ilya Dryomov:
 "On the filesystem side we have:

   - a fix to enforce quotas set above the mount point (Luis Henriques)

   - support for exporting snapshots through NFS (Zheng Yan)

   - proper statx implementation (Jeff Layton). statx flags are mapped
     to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account.

   - some follow-up dentry name handling fixes, in particular
     elimination of our hand-rolled helper and the switch to __getname()
     as suggested by Al (Jeff Layton)

   - a set of MDS client cleanups in preparation for async MDS requests
     in the future (Jeff Layton)

   - a fix to sync the filesystem before remounting (Jeff Layton)

  On the rbd side, work is on-going on object-map and fast-diff image
  features"

* tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client: (29 commits)
  ceph: flush dirty inodes before proceeding with remount
  ceph: fix unaligned access in ceph_send_cap_releases
  libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer
  libceph: fix unaligned accesses in ceph_entity_addr handling
  rbd: don't assert on writes to snapshots
  rbd: client_mutex is never nested
  ceph: print inode number in __caps_issued_mask debugging messages
  ceph: just call get_session in __ceph_lookup_mds_session
  ceph: simplify arguments and return semantics of try_get_cap_refs
  ceph: fix comment over ceph_drop_caps_for_unlink
  ceph: move wait for mds request into helper function
  ceph: have ceph_mdsc_do_request call ceph_mdsc_submit_request
  ceph: after an MDS request, do callback and completions
  ceph: use pathlen values returned by set_request_path_attr
  ceph: use __getname/__putname in ceph_mdsc_build_path
  ceph: use ceph_mdsc_build_path instead of clone_dentry_name
  ceph: fix potential use-after-free in ceph_mdsc_build_path
  ceph: dump granular cap info in "caps" debugfs file
  ceph: make iterate_session_caps a public symbol
  ceph: fix NULL pointer deref when debugging is enabled
  ...

Pull thermal management updates from Zhang Rui:

 - Remove the 'module' Kconfig option for thermal subsystem framework
   because the thermal framework are required to be ready as early as
   possible to avoid overheat at boot time (Daniel Lezcano)

 - Fix a bug that thermal framework pokes disabled thermal zones upon
   resume (Wei Wang)

  - A couple of cleanups and trivial fixes on int340x thermal drivers
    (Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  drivers: thermal: processor_thermal: Downgrade error message
  mlxsw: Remove obsolete dependency on THERMAL=m
  hwmon/drivers/core: Simplify complex dependency
  thermal/drivers/core: Fix typo in the option name
  thermal/drivers/core: Remove depends on THERMAL in Kconfig
  thermal/drivers/core: Remove module unload code
  thermal/drivers/core: Remove the module Kconfig's option
  thermal: core: skip update disabled thermal zones after suspend
  thermal: make device_register's type argument const
  thermal: intel: int340x: processor_thermal_device: simplify to get driver data
  thermal/int3403_thermal: favor _TMP instead of PTYP

Merge tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Improve DM snapshot target's scalability by using finer grained
   locking. Requires some list_bl interface improvements.

 - Add ability for DM integrity to use a bitmap mode, that tracks
   regions where data and metadata are out of sync, instead of using a
   journal.

 - Improve DM thin provisioning target to not write metadata changes to
   disk if the thin-pool and associated thin devices are merely
   activated but not used. This avoids metadata corruption due to
   concurrent activation of thin devices across different OS instances
   (e.g. split brain scenarios, which ultimately would be avoided if
   proper device filters were used -- but not having proper filtering
   has proven a very common configuration mistake)

 - Fix missing call to path selector type->end_io in DM multipath. This
   fixes reported performance problems due to inaccurate path selector
   IO accounting causing an imbalance of IO (e.g. avoiding issuing IO to
   particular path due to it seemingly being heavily used).

 - Fix bug in DM cache metadata's loading of its discard bitset that
   could lead to all cache blocks being discarded if the very first
   cache block was discarded (thankfully in practice the first cache
   block is generally in use; be it FS superblock, partition table, disk
   label, etc).

 - Add testing-only DM dust target which simulates a device that has
   failing sectors and/or read failures.

 - Fix a DM init error path reference count hang that caused boot hangs
   if user supplied malformed input on kernel commandline.

 - Fix a couple issues with DM crypt target's logging being overly
   verbose or lacking context.

 - Various other small fixes to DM init, DM multipath, DM zoned, and DM
   crypt.

* tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (42 commits)
  dm: fix a couple brace coding style issues
  dm crypt: print device name in integrity error message
  dm crypt: move detailed message into debug level
  dm ioctl: fix hang in early create error condition
  dm integrity: whitespace, coding style and dead code cleanup
  dm integrity: implement synchronous mode for reboot handling
  dm integrity: handle machine reboot in bitmap mode
  dm integrity: add a bitmap mode
  dm integrity: introduce a function add_new_range_and_wait()
  dm integrity: allow large ranges to be described
  dm ingerity: pass size to dm_integrity_alloc_page_list()
  dm integrity: introduce rw_journal_sectors()
  dm integrity: update documentation
  dm integrity: don't report unused options
  dm integrity: don't check null pointer before kvfree and vfree
  dm integrity: correctly calculate the size of metadata area
  dm dust: Make dm_dust_init and dm_dust_exit static
  dm dust: remove redundant unsigned comparison to less than zero
  dm mpath: always free attached_handler_name in parse_path()
  dm init: fix max devices/targets checks
  ...

It turned out that DEBUG_SLAB_LEAK is still broken even after recent
recue efforts that when there is a large number of objects like
kmemleak_object which is normal on a debug kernel,

  # grep kmemleak /proc/slabinfo
  kmemleak_object   2243606 3436210 ...

reading /proc/slab_allocators could easily loop forever while processing
the kmemleak_object cache and any additional freeing or allocating
objects will trigger a reprocessing. To make a situation worse,
soft-lockups could easily happen in this sitatuion which will call
printk() to allocate more kmemleak objects to guarantee an infinite
loop.

Also, since it seems no one had noticed when it was totally broken
more than 2-year ago - see the commit fcf88917 ("slab: fix a crash
by reading /proc/slab_allocators"), probably nobody cares about it
anymore due to the decline of the SLAB. Just remove it entirely.
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix afs_do_lookup() such that when it does an inline bulk status fetch op,
it will update inodes that are already extant (something that afs_iget()
doesn't do) and to cache permits for each inode created (thereby avoiding a
follow up FS.FetchStatus call to determine this).

Extant inodes need looking up in advance so that their cb_break counters
before and after the operation can be compared.  To this end, the inode
pointers are cached so that they don't need looking up again after the op.

Fixes: 5cf9dd55 ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>

Pass the server and volume break counts from before the status fetch
operation that queried the attributes of a file into afs_iget5_set() so
that the new vnode's break counters can be initialised appropriately.

This allows detection of a volume or server break that happened whilst we
were fetching the status or setting up the vnode.

Fixes: c435ee34 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>

Make use of the status update for the target file that the YFS.RemoveFile2
RPC op returns to correctly update the vnode as to whether the file was
actually deleted or just had nlink reduced.

Fixes: 30062bd1 ("afs: Implement YFS support in the fs client")
Signed-off-by: David Howells <dhowells@redhat.com>

Fix afs_validate() to clear AFS_VNODE_CB_PROMISED on a vnode if we detect
any condition that causes the callback promise to be broken implicitly,
including server break (cb_s_break), volume break (cb_v_break) or callback
expiry.

Fixes: ae3b7361 ("afs: Fix validation/callback interaction")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>

Use RCU-based freeing for afs_cb_interest struct objects and use RCU on
vnode->cb_interest.  Use that change to allow afs_check_validity() to use
read_seqbegin_or_lock() instead of read_seqlock_excl().

This also requires the caller of afs_check_validity() to hold the RCU read
lock across the call.
Signed-off-by: David Howells <dhowells@redhat.com>

Split afs_validate() so that the part that decides if the vnode is still
valid can be used under LOOKUP_RCU conditions from afs_d_revalidate().
Signed-off-by: David Howells <dhowells@redhat.com>

Don't save callback version and type fields as the version is about the
format of the callback information and the type is relative to the
particular RPC call.
Signed-off-by: David Howells <dhowells@redhat.com>

Convert the vendor prefix registry to a schema. This will enable checking
that new vendor prefixes are added (in addition to the less than perfect
checkpatch.pl check) and will also check against adding other prefixes
which are not vendors.

Converted vendor-prefixes.txt using the following sed script:

sed -e 's/\([a-zA-Z0-9\-]*\)[[:space:]]*\([a-zA-Z0-9].*\)/  "^\1,\.\*\":\n    description: \2/'
Signed-off-by: Rob Herring <robh@kernel.org>

Pull media fixes from Mauro Carvalho Chehab:
 "Some fixes for some platform drivers (rockchip, atmel, omap, daVinci,
  tegra-cec, coda and rcar).

  Also includes a fix on one of the V4L2 uAPI doc, explaining a border
  case"

* tag 'media/v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: rockchip/vpu: Fix/re-order probe-error/remove path
  media: rockchip/vpu: Initialize mdev->bus_info
  media: rockchip/vpu: Get vdev from the file arg in vidioc_querycap()
  media: rockchip/vpu: Add missing dont_use_autosuspend() calls
  media: rockchip/vpu: Do not request id 0 for our video device
  media: tegra-cec: fix cec_notifier_parse_hdmi_phandle return check
  media: davinci/vpbe: array underflow in vpbe_enum_outputs()
  media: field-order.rst: clarify FIELD_ANY and FIELD_NONE
  media: staging/imx: add media device to capture register
  media: rcar-csi2: Propagate the FLD signal for NTSC and PAL
  media: rcar-csi2: restart CSI-2 link if error is detected
  media: omap_vout: potential buffer overflow in vidioc_dqbuf()
  media: coda: fix unset field and fail on invalid field in buf_prepare
  media: atmel: atmel-isc: fix asd memory allocation
  media: atmel: atmel-isc: fix INIT_WORK misplacement
  media: atmel: atmel-isc: limit incoming pixels per frame

Pull EDAC fixes from Borislav Petkov:

 - Do not build mpc85_edac as a module (Michael Ellerman)

 - Correct edac_mc_find()'s return value on error (Robert Richter)

* tag 'edac_fixes_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC/mc: Fix edac_mc_find() in case no device is found
  EDAC/mpc85xx: Prevent building as a module

Pull configfs update from Christoph Hellwig:

 - a fix for an error path use after free (YueHaibing)

* tag 'configfs-for-5.2' of git://git.infradead.org/users/hch/configfs:
  configfs: fix possible use-after-free in configfs_register_group

Pull nommu generic uaccess updates from Arnd Bergmann:
 "asm-generic: kill <asm/segment.h> and improve nommu generic uaccess helpers

  Christoph Hellwig writes:

     This is a series doing two somewhat interwinded things. It improves
     the asm-generic nommu uaccess helper to optionally be entirely
     generic and not require any arch helpers for the actual uaccess.
     For the generic uaccess.h to actually be generically useful I also
     had to kill off the mess we made of <asm/segment.h>, which really
     shouldn't exist on most architectures"

* tag 'asm-generic-nommu' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: optimize generic uaccess for 8-byte loads and stores
  asm-generic: provide entirely generic nommu uaccess
  arch: mostly remove <asm/segment.h>
  asm-generic: don't include <asm/segment.h> from <asm/uaccess.h>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes and updates:

   - a handful of MDS documentation/comment updates

   - a cleanup related to hweight interfaces

   - a SEV guest fix for large pages

   - a kprobes LTO fix

   - and a final cleanup commit for vDSO HPET support removal"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation/mds: Improve CPU buffer clear documentation
  x86/speculation/mds: Revert CPU buffer clear on double fault exit
  x86/kconfig: Disable CONFIG_GENERIC_HWEIGHT and remove __HAVE_ARCH_SW_HWEIGHT
  x86/mm: Do not use set_{pud, pmd}_safe() when splitting a large page
  x86/kprobes: Make trampoline_handler() global and visible
  x86/vdso: Remove hpet_page from vDSO

Pull time fixes from Ingo Molnar:
 "A TIA adjtimex interface extension, and a POSIX compliance ABI fix for
  timespec64 users"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ntp: Allow TAI-UTC offset to be set to zero
  y2038: Make CONFIG_64BIT_TIME unconditional

Pull perf fixes from Ingo Molnar:
 "An x86 PMU constraint fix, an interface fix, and a Sparse fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Allow PEBS multi-entry in watermark mode
  perf/x86/intel: Fix INTEL_FLAGS_EVENT_CONSTRAINT* masking
  perf/x86/amd/iommu: Make the 'amd_iommu_attr_groups' symbol static

Pull locking fix from Ingo Molnar:
 "A single rwsem fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Prevent decrement of reader count before increment

Alex Xu reported a regression in strace, caused by the introduction of
the cgroup v2 freezer. The regression can be reproduced by stracing
the following simple program:

  #include <unistd.h>

  int main() {
      write(1, "a", 1);
      return 0;
  }

An attempt to run strace ./a.out leads to the infinite loop:
  [ pre-main omitted ]
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  write(1, "a", 1)                        = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
  [ repeats forever ]

The problem occurs because the traced task leaves ptrace_stop()
(and the signal handling loop) with the frozen bit set. So let's
call cgroup_leave_frozen(true) unconditionally after sleeping
in ptrace_stop().

With this patch applied, strace works as expected:
  [ pre-main omitted ]
  write(1, "a", 1)                        = 1
  exit_group(0)                           = ?
  +++ exited with 0 +++
Reported-by: Alex Xu <alex_y_xu@yahoo.ca>
Fixes: 76f969e8 ("cgroup: cgroup v2 freezer")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull core fixes from Ingo Molnar:
 "A handful of objtool updates, plus a documentation addition for
  __ab_c_size()"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix whitelist documentation typo
  objtool: Fix function fallthrough detection
  objtool: Don't use ignore flag for fake jumps
  overflow.h: Add comment documenting __ab_c_size()

Pull ARM updates from Russell King:
 "ARM development updates:

   - more unified assembly conversions for clang

   - drop obsolete -mauto-it assembler option

   - remove arm_memory_present in preference to the generic version

   - remove unused asm/limits.h header

   - vdso linker update

  We tried to make the assembler warn if unified syntax was not used,
  but unfortunately older versions of GCC warn, so the commit had to be
  reverted"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  Revert "ARM: 8846/1: warn if divided syntax assembler is used"
  ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO
  ARM: 8855/1: remove unused <asm/limits.h>
  ARM: 8850/1: use memblocks_present
  ARM: 8854/1: drop -mauto-it
  ARM: 8846/1: warn if divided syntax assembler is used
  ARM: 8853/1: drop WASM to work around LLVM issue
  ARM: 8852/1: uaccess: use unified assembler language syntax
  ARM: 8851/1: add TUSERCOND() macro for conditional postfix

Pull ARM SoC defconfig updates from Olof Johansson:
 "Mostly the usual churn due to options being reordered or not added in
  the right locations.

  Some various enabling of new drivers, etc.

  ... i.e. the usual updates, nothing particularly sticks out"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
  arm64: defconfig: Update UFSHCD for Hi3660 soc
  ARM: multi_v7_defconfig: Enable support for STPMIC1
  ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
  arm64: defconfig: enable mv-xor driver
  ARM: Enable Trusted Foundations for multiplatform ARM v7
  ARM: tegra: Enable Trusted Foundations by default
  ARM: tegra: Update default configuration for v5.1-rc1
  ARM: multi_v7_defconfig: Update for moved options
  ARM: multi_v7_defconfig: Update for dropped options
  ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig
  ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
  ARM: qcom_defconfig: add options for LG Nexus 5 phone
  arm64: defconfig: include the Agilex platform to the arm64 defconfig
  arm64: defconfig: Add PWM Fan support
  arm64: defconfig: Enable Tegra HDA support
  ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
  ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
  ARM: shmobile: defconfig: Refresh for v5.1-rc1
  ARM: multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers
  arm64: defconfig: enable fpga and service layer
  ...

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms and a couple of the small driver
  subsystems we merge through our tree:

  Among the larger pieces:

   - Power management improvements for TI am335x and am437x (RTC
     suspend/wake)

   - Misc new additions for Amlogic (socinfo updates)

   - ZynqMP FPGA manager

   - Nvidia improvements for reset/powergate handling

   - PMIC wrapper for Mediatek MT8516

   - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  soc: aspeed: fix Kconfig
  soc: add aspeed folder and misc drivers
  spi: zynqmp: Fix build break
  soc: imx: Add generic i.MX8 SoC driver
  MAINTAINERS: Update email for Qualcomm SoC maintainer
  memory: tegra: Fix a typos for "fdcdwr2" mc client
  Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
  memory: tegra: Replace readl-writel with mc_readl-mc_writel
  memory: tegra: Fix integer overflow on tick value calculation
  memory: tegra: Fix missed registers values latching
  ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30
  optee: allow to work without static shared memory
  soc/tegra: pmc: Move powergate initialisation to probe
  soc/tegra: pmc: Remove reset sysfs entries on error
  soc/tegra: pmc: Fix reset sources and levels
  soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
  soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
  fpga manager: Adding FPGA Manager support for Xilinx zynqmp
  dt-bindings: fpga: Add bindings for ZynqMP fpga driver
  firmware: xilinx: Add fpga API's
  ...

Pull ARM Device-tree updates from Olof Johansson:
 "Besides new bindings and additional descriptions of hardware blocks
  for various SoCs and boards, the main new contents here is:

  SoCs:
   - Intel Agilex (SoCFPGA)
   - NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)

  New boards:
   - Allwinner:
      + RerVision H3-DVK (H3)
      + Oceanic 5205 5inMFD (H6)
      + Beelink GS2 (H6)
      + Orange Pi 3 (H6)
   - Rockchip:
      + Orange Pi RK3399
      + Nanopi NEO4
      + Veyron-Mighty Chromebook variant
   - Amlogic:
      + SEI Robotics SEI510
   - ST Micro:
      + stm32mp157a discovery1
      + stm32mp157c discovery2
   - NXP:
      + Eckelmann ci4x10 (i.MX6DL)
      + i.MX8MM EVK (i.MX8MM)
      + ZII i.MX7 RPU2 (i.MX7)
      + ZII SPB4 (VF610)
      + Zii Ultra (i.MX8M)
      + TQ TQMa7S (i.MX7Solo)
      + TQ TQMa7D (i.MX7Dual)
      + Kobo Aura (i.MX50)
      + Menlosystems M53 (i.MX53)j
   - Nvidia:
      + Jetson Nano (Tegra T210)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits)
  arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
  arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
  arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
  arm64: dts: bitmain: Add GPIO support for BM1880 SoC
  ARM: dts: gemini: Indent DIR-685 partition table
  dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
  ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
  arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
  arm64: dts: msm8998: thermal: Fix number of supported sensors
  arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
  arm64: dts: exynos: Move fixed-clocks out of soc
  arm64: dts: exynos: Move pmu and timer nodes out of soc
  ARM: dts: s5pv210: Fix camera clock provider on Goni board
  ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
  ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
  ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
  ARM: dts: exynos: Move pmu and timer nodes out of soc
  arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
  arm64: dts: db820c: Add sound card support
  arm64: dts: apq8096-db820c: Add HDMI display support
  ...

Pull ARM SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms.

  Major themes this release:

   - Conversion of ixp4xx to a modern platform (drivers, DT, bindings)

   - Moving some of the ep93xx headers around to get it closer to
     multiplatform enabled.

   - Cleanups of Davinci

  This also contains a few patches that were queued up as fixes before
  5.1 but I didn't get sent in before release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  ARM: debug-ll: add default address for digicolor
  ARM: u300: regulator: add MODULE_LICENSE()
  ARM: ep93xx: move private headers out of mach/*
  ARM: ep93xx: move pinctrl interfaces into include/linux/soc
  ARM: ep93xx: keypad: stop using mach/platform.h
  ARM: ep93xx: move network platform data to separate header
  ARM: stm32: add AMBA support for stm32 family
  MAINTAINERS: update arch/arm/mach-davinci
  ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
  ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
  soc: ixp4xx: qmgr: Add DT probe code
  soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
  soc: ixp4xx: npe: Add DT probe code
  soc: ixp4xx: Add DT bindings for IXP4xx NPE
  soc: ixp4xx: qmgr: Pass resources
  soc: ixp4xx: Remove unused functions
  soc: ixp4xx: Uninline several functions
  soc: ixp4xx: npe: Pass addresses as resources
  ARM: ixp4xx: Turn the QMGR into a platform device
  ARM: ixp4xx: Turn the NPE into a platform device
  ...

When __afs_break_callback() clears the CB_PROMISED flag, it increments
vnode->cb_break to trigger a future refetch of the status and callback -
however it also calls afs_clear_permits(), which also increments
vnode->cb_break.

Fix this by removing the increment from afs_clear_permits().

Whilst we're at it, fix the conditional call to afs_put_permits() as the
function checks to see if the argument is NULL, so the check is redundant.

Fixes: be080a6f ("afs: Overhaul permit caching");
Signed-off-by: David Howells <dhowells@redhat.com>

When applying the status and callback in the response of an operation,
apply them in the same critical section so that there's no race between
checking the callback state and checking status-dependent state (such as
the data version).

Fix this by:

 (1) Allocating a joint {status,callback} record (afs_status_cb) before
     calling the RPC function for each vnode for which the RPC reply
     contains a status or a status plus a callback.  A flag is set in the
     record to indicate if a callback was actually received.

 (2) These records are passed into the RPC functions to be filled in.  The
     afs_decode_status() and yfs_decode_status() functions are removed and
     the cb_lock is no longer taken.

 (3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer
     update the vnode.

 (4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update
     the vnode.

 (5) vnodes, expected data-version numbers and callback break counters
     (cb_break) no longer need to be passed to the reply delivery
     functions.

     Note that, for the moment, the file locking functions still need
     access to both the call and the vnode at the same time.

 (6) afs_vnode_commit_status() is now given the cb_break value and the
     expected data_version and the task of applying the status and the
     callback to the vnode are now done here.

     This is done under a single taking of vnode->cb_lock.

 (7) afs_pages_written_back() is now called by afs_store_data() rather than
     by the reply delivery function.

     afs_pages_written_back() has been moved to before the call point and
     is now given the first and last page numbers rather than a pointer to
     the call.

 (8) The indicator from YFS.RemoveFile2 as to whether the target file
     actually got removed (status.abort_code == VNOVNODE) rather than
     merely dropping a link is now checked in afs_unlink rather than in
     xdr_decode_YFSFetchStatus().

Supplementary fixes:

 (*) afs_cache_permit() now gets the caller_access mask from the
     afs_status_cb object rather than picking it out of the vnode's status
     record.  afs_fetch_status() returns caller_access through its argument
     list for this purpose also.

 (*) afs_inode_init_from_status() now uses a write lock on cb_lock rather
     than a read lock and now sets the callback inside the same critical
     section.

Fixes: c435ee34 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>

__afs_break_callback() holds vnode->lock around its call of
afs_lock_may_be_available() - which also takes that lock.

Fix this by not taking the lock in __afs_break_callback().

Also, there's no point checking the granted_locks and pending_locks queues;
it's sufficient to check lock_state, so move that check out of
afs_lock_may_be_available() into __afs_break_callback() to replace the
queue checks.

Fixes: e8d6c554 ("AFS: implement file locking")
Signed-off-by: David Howells <dhowells@redhat.com>

Always ask for the reply time from AF_RXRPC as it's used to calculate the
callback expiry time and lock expiry times, so it's needed by most FS
operations.
Signed-off-by: David Howells <dhowells@redhat.com>

Don't invalidate the callback promise on a directory if the
AFS_VNODE_DIR_VALID flag is not set (which indicates that the directory
contents are invalid, due to edit failure, callback break, page reclaim).

The directory will be reloaded next time the directory is accessed, so
clearing the callback flag at this point may race with a reload of the
directory and cancel it's recorded callback promise.

Fixes: f3ddee8d ("afs: Fix directory handling")
Signed-off-by: David Howells <dhowells@redhat.com>

afs_do_lookup() will do an order-1 allocation to allocate status records if
there are more than 39 vnodes to stat.

Fix this by allocating an array of {status,callback} records for each vnode
we want to examine using vmalloc() if larger than a page.

This not only gets rid of the order-1 allocation, but makes it easier to
grow beyond 50 records for YFS servers.  It also allows us to move to
{status,callback} tuples for other calls too and makes it easier to lock
across the application of the status and the callback to the vnode.

Fixes: 5cf9dd55 ("afs: Prospectively look up extra files when doing a single lookup")
Signed-off-by: David Howells <dhowells@redhat.com>

Fix the calculation of the expiry time of a callback promise, as obtained
from operations like FS.FetchStatus and FS.FetchData.

The time should be based on the timestamp of the first DATA packet in the
reply and the calculation needs to turn the ktime_t timestamp into a
time64_t.

Fixes: c435ee34 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>