The t->type in BTF_KIND_FWD is not used.  It must be 0.
This patch ensures that and also adds a test case in test_btf.c
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch ensures array's t->size is 0.

The array size is decided by its individual elem's size and the
number of elements.  Hence, t->size is not used and
it must be 0.

A test case is added to test_btf.c
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Prashant Bhole says:

====================
test_sockmap was originally written only to exercise kernel code
paths, so there was no strict checking of errors. When the code was
modified to run as selftests, due to lack of error handling it was not
able to detect test failures.

In order to improve, this series fixes error handling, test run time
and data verification.

Also slightly improved test output by printing parameter values (cork,
apply, start, end) so that parameters for all tests are displayed.

Changes in v4:
  - patch1: Ignore RX timoute error only for corked tests
  - patch3: Setting different timeout for corked tests and reduce
      run time by reducing number of iterations in some tests

Changes in v3:
  - Skipped error checking for corked tests
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Print values of test options like apply, cork, start, end so that
individual failed tests can be identified for manual run
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When data verification is enabled, some tests fail because verification is done
incorrectly. Following changes fix it.

- Identify the size of data block to be verified
- Reset verification counter when data block size is reached
- Fixed the value printed in case of verfication failure

Fixes: 16962b24 ("bpf: sockmap, add selftests")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Currently 10us delay is too low for many tests to succeed. It needs to
be increased. Also, many corked tests are expected to hit rx timeout
irrespective of timeout value.

- This patch sets 1000usec timeout value for corked tests because less
than that causes broken-pipe error in tx thread. Also sets 1 second
timeout for all other tests because less than that results in RX
timeout
- tests with apply=1 and higher number of iterations were taking lot
of time. This patch reduces test run time by reducing iterations.

real    0m12.968s
user    0m0.219s
sys     0m14.337s

Fixes: a18fda1a ("bpf: reduce runtime of test_sockmap tests")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

In case of selftest mode, temporary cgroup environment is created but
cgroup is not joined. It causes test failures. Fixed by joining the
cgroup

Fixes: 16962b24 ("bpf: sockmap, add selftests")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Test failures are not identified because exit code of RX/TX threads
is not checked. Also threads are not returning correct exit code.

- Return exit code from threads depending on test execution status
- In main thread, check the exit code of RX/TX threads
- Skip error checking for corked tests as they are expected to timeout

Fixes: 16962b24 ("bpf: sockmap, add selftests")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Update bpf_fib_lookup to return -EAFNOSUPPORT for unsupported address
families. Allows userspace to probe for support as more are added
(e.g., AF_MPLS).
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The assignment dev = dev is redundant and should be removed.

Detected by CoverityScan, CID#1469486 ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add support for recently added BPF_CGROUP_UDP4_SENDMSG and
BPF_CGROUP_UDP6_SENDMSG attach types to bpftool, update documentation
and bash completion.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Sean Young says:

====================
The kernel IR decoders (drivers/media/rc/ir-*-decoder.c) support the most
widely used IR protocols, but there are many protocols which are not
supported[1]. For example, the lirc-remotes[2] repo has over 2700 remotes,
many of which are not supported by rc-core. There is a "long tail" of
unsupported IR protocols, for which lircd is need to decode the IR .

IR encoding is done in such a way that some simple circuit can decode it;
therefore, bpf is ideal.

In order to support all these protocols, here we have bpf based IR decoding.
The idea is that user-space can define a decoder in bpf, attach it to
the rc device through the lirc chardev.

Separate work is underway to extend ir-keytable to have an extensive library
of bpf-based decoders, and a much expanded library of rc keymaps.

Another future application would be to compile IRP[3] to a IR BPF program, and
so support virtually every remote without having to write a decoder for each.
It might also be possible to support non-button devices such as analog
directional pads or air conditioning remote controls and decode the target
temperature in bpf, and pass that to an input device.

[1] http://www.hifi-remote.com/wiki/index.php?title=DecodeIR
[2] https://sourceforge.net/p/lirc-remotes/code/ci/master/tree/remotes/
[3] http://www.hifi-remote.com/wiki/index.php?title=IRP_Notation

Changes since v4:
 - Renamed rc_dev_bpf_{attach,detach,query} to lirc_bpf_{attach,detach,query}
 - Fixed error path in lirc_bpf_query
 - Rebased on bpf-next

Changes since v3:
 - Implemented review comments from Quentin Monnet and Y Song (thanks!)
 - More helpful and better formatted bpf helper documentation
 - Changed back to bpf_prog_array rather than open-coded implementation
 - scancodes can be 64 bit
 - bpf gets passed values in microseconds, not nanoseconds.
   microseconds is more than than enough (IR receivers support carriers upto
   70kHz, at which point a single period is already 14 microseconds). Also,
   this makes it much more consistent with lirc mode2.
 - Since it looks much more like lirc mode2, rename the program type to
   BPF_PROG_TYPE_LIRC_MODE2.
 - Rebased on bpf-next

Changes since v2:
 - Fixed locking issues
 - Improved self-test to cover more cases
 - Rebased on bpf-next again

Changes since v1:
 - Code review comments from Y Song <ys114321@gmail.com> and
   Randy Dunlap <rdunlap@infradead.org>
 - Re-wrote sample bpf to be selftest
 - Renamed RAWIR_DECODER -> RAWIR_EVENT (Kconfig, context, bpf prog type)
 - Rebase on bpf-next
 - Introduced bpf_rawir_event context structure with simpler access checking
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This is simple test over rc-loopback.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add support for BPF_PROG_LIRC_MODE2. This type of BPF program can call
rc_keydown() to reported decoded IR scancodes, or rc_repeat() to report
that the last key should be repeated.

The bpf program can be attached to using the bpf(BPF_PROG_ATTACH) syscall;
the target_fd must be the /dev/lircN device.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This makes is it possible for bpf prog detach to return -ENOENT.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Verify flags argument contains only known flags. Allows programs to probe
for support as more are added.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

MPLS support will not be submitted this dev cycle, but in working on it
I do see a few changes are needed to the API. For now, drop mpls from the
API. Since the fields in question are unions, the mpls fields can be added
back later without affecting the uapi.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The local variable is only used while CONFIG_IPV6 enabled

net/core/filter.c: In function ‘sk_msg_convert_ctx_access’:
net/core/filter.c:6489:6: warning: unused variable ‘off’ [-Wunused-variable]
  int off;
      ^
This puts it into #ifdef.

Fixes: 303def35 ("bpf: allow sk_msg programs to read sock fields")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

These are minor edits for the eBPF helpers documentation in
include/uapi/linux/bpf.h.

The main fix consists in removing "BPF_FIB_LOOKUP_", because it ends
with a non-escaped underscore that gets interpreted by rst2man and
produces the following message in the resulting manual page:

    DOCUTILS SYSTEM MESSAGES
           System Message: ERROR/3 (/tmp/bpf-helpers.rst:, line 1514)
                  Unknown target name: "bpf_fib_lookup".

Other edits consist in:

- Improving formatting for flag values for "bpf_fib_lookup()" helper.
- Emphasising a parameter name in description of the return value for
  "bpf_get_stack()" helper.
- Removing unnecessary blank lines between "Description" and "Return"
  sections for the few helpers that would use it, for consistency.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Andrey Ignatov says:

====================
v3 -> v4:
* handle static key correctly for CONFIG_CGROUP_BPF=n.

v2 -> v3:
* place BPF logic under static key in udp_sendmsg, udpv6_sendmsg;
* rebase.

v1 -> v2:
* return ENOTSUPP if bpf_prog rewrote IPv6-only with IPv4-mapped IPv6;
* add test for IPv4-mapped IPv6 use-case;
* fix build for CONFIG_CGROUP_BPF=n;
* rebase.

This path set adds BPF hooks for sys_sendmsg similar to existing hooks for
sys_bind and sys_connect.

Hooks allow to override source IP (including the case when it's set via
cmsg(3)) and destination IP:port for unconnected UDP (slow path). TCP and
connected UDP (fast path) are not affected. This makes UDP support
complete: connected UDP is handled by sys_connect hooks, unconnected by
sys_sendmsg ones.

Similar to sys_connect hooks, sys_sendmsg ones can be used to make system
calls such as sendmsg(2) and sendto(2) return EPERM.

Please see patch 0002 for more details.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add selftest for BPF_CGROUP_UDP4_SENDMSG and BPF_CGROUP_UDP6_SENDMSG
attach types.

Try to sendmsg(2) to specific IP:port and test that:
* source IP is overridden as expected.
* remote IP:port pair is overridden as expected;

Both UDPv4 and UDPv6 are tested.

Output:
  # test_sock_addr.sh 2>/dev/null
  Wait for testing IPv4/IPv6 to become available ... OK
  ... pre-existing test-cases skipped ...
  Test case: sendmsg4: load prog with wrong expected attach type .. [PASS]
  Test case: sendmsg4: attach prog with wrong attach type .. [PASS]
  Test case: sendmsg4: rewrite IP & port (asm) .. [PASS]
  Test case: sendmsg4: rewrite IP & port (C) .. [PASS]
  Test case: sendmsg4: deny call .. [PASS]
  Test case: sendmsg6: load prog with wrong expected attach type .. [PASS]
  Test case: sendmsg6: attach prog with wrong attach type .. [PASS]
  Test case: sendmsg6: rewrite IP & port (asm) .. [PASS]
  Test case: sendmsg6: rewrite IP & port (C) .. [PASS]
  Test case: sendmsg6: IPv4-mapped IPv6 .. [PASS]
  Test case: sendmsg6: deny call .. [PASS]
  Summary: 27 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

test_sock_addr was not easy to extend since it was focused on sys_bind
and sys_connect quite a bit.

Reorganized it so that it'll be easier to cover new test-cases for
`BPF_PROG_TYPE_CGROUP_SOCK_ADDR`:

- decouple test-cases so that only one BPF prog is tested at a time;

- check programmatically that local IP:port for sys_bind, source IP and
  destination IP:port for sys_connect are rewritten property by tested
  BPF programs.

The output of new version:
  # test_sock_addr.sh 2>/dev/null
  Wait for testing IPv4/IPv6 to become available ... OK
  Test case: bind4: load prog with wrong expected attach type .. [PASS]
  Test case: bind4: attach prog with wrong attach type .. [PASS]
  Test case: bind4: rewrite IP & TCP port in .. [PASS]
  Test case: bind4: rewrite IP & UDP port in .. [PASS]
  Test case: bind6: load prog with wrong expected attach type .. [PASS]
  Test case: bind6: attach prog with wrong attach type .. [PASS]
  Test case: bind6: rewrite IP & TCP port in .. [PASS]
  Test case: bind6: rewrite IP & UDP port in .. [PASS]
  Test case: connect4: load prog with wrong expected attach type .. [PASS]
  Test case: connect4: attach prog with wrong attach type .. [PASS]
  Test case: connect4: rewrite IP & TCP port .. [PASS]
  Test case: connect4: rewrite IP & UDP port .. [PASS]
  Test case: connect6: load prog with wrong expected attach type .. [PASS]
  Test case: connect6: attach prog with wrong attach type .. [PASS]
  Test case: connect6: rewrite IP & TCP port .. [PASS]
  Test case: connect6: rewrite IP & UDP port .. [PASS]
  Summary: 16 PASSED, 0 FAILED

(stderr contains errors from libbpf when testing load/attach with
invalid arguments)
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

libbpf can guess prog type and expected attach type based on section
name. Add hints for "cgroup/sendmsg4" and "cgroup/sendmsg6" section
names.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Sync new `BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG`
attach types to tools/.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

In addition to already existing BPF hooks for sys_bind and sys_connect,
the patch provides new hooks for sys_sendmsg.

It leverages existing BPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR`
that provides access to socket itlself (properties like family, type,
protocol) and user-passed `struct sockaddr *` so that BPF program can
override destination IP and port for system calls such as sendto(2) or
sendmsg(2) and/or assign source IP to the socket.

The hooks are implemented as two new attach types:
`BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG` for UDPv4 and
UDPv6 correspondingly.

UDPv4 and UDPv6 separate attach types for same reason as sys_bind and
sys_connect hooks, i.e. to prevent reading from / writing to e.g.
user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound.

The difference with already existing hooks is sys_sendmsg are
implemented only for unconnected UDP.

For TCP it doesn't make sense to change user-provided `struct sockaddr *`
at sendto(2)/sendmsg(2) time since socket either was already connected
and has source/destination set or wasn't connected and call to
sendto(2)/sendmsg(2) would lead to ENOTCONN anyway.

Connected UDP is already handled by sys_connect hooks that can override
source/destination at connect time and use fast-path later, i.e. these
hooks don't affect UDP fast-path.

Rewriting source IP is implemented differently than that in sys_connect
hooks. When sys_sendmsg is used with unconnected UDP it doesn't work to
just bind socket to desired local IP address since source IP can be set
on per-packet basis by using ancillary data (cmsg(3)). So no matter if
socket is bound or not, source IP has to be rewritten on every call to
sys_sendmsg.

To do so two new fields are added to UAPI `struct bpf_sock_addr`;
* `msg_src_ip4` to set source IPv4 for UDPv4;
* `msg_src_ip6` to set source IPv6 for UDPv6.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Static key is used to enable/disable cgroup-bpf related code paths at
run time.

Though it's not defined when cgroup-bpf is disabled at compile time,
i.e. CONFIG_CGROUP_BPF=n, and if some code wants to use it, it has to do
this:

	#ifdef CONFIG_CGROUP_BPF
		if (cgroup_bpf_enabled) {
			/* ... some work ... */
		}
	#endif

This code can be simplified by setting cgroup_bpf_enabled to 0 for
CONFIG_CGROUP_BPF=n case:

	if (cgroup_bpf_enabled) {
		/* ... some work ... */
	}

And it aligns well with existing BPF_CGROUP_RUN_PROG_* macros that
defined for both states of CONFIG_CGROUP_BPF.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Previous patch "selftests/bpf: test for seg6local End.BPF action" lacks
some UAPI headers in tools/.

clang -I. -I./include/uapi -I../../../include/uapi -idirafter
/usr/local/include -idirafter
/data/users/yhs/work/llvm/build/install/lib/clang/7.0.0/include
-idirafter /usr/include -Wno-compare-distinct-pointer-types \
         -O2 -target bpf -emit-llvm -c test_lwt_seg6local.c -o - |      \
llc -march=bpf -mcpu=generic  -filetype=obj -o
[...]/net-next/tools/testing/selftests/bpf/test_lwt_seg6local.o
test_lwt_seg6local.c:4:10: fatal error: 'linux/seg6_local.h' file not found
         ^~~~~~~~~~~~~~~~~~~~
1 error generated.
make: Leaving directory
`/data/users/yhs/work/net-next/tools/testing/selftests/bpf'

v2: moving the headers to tools/include/uapi/.
Reported-by: Y Song <ys114321@gmail.com>
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The stack_map_get_build_id_offset() function is too long for gcc to track
whether 'work' may or may not be initialized at the end of it, leading
to a false-positive warning:

kernel/bpf/stackmap.c: In function 'stack_map_get_build_id_offset':
kernel/bpf/stackmap.c:334:13: error: 'work' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This removes the 'in_nmi_ctx' flag and uses the state of that variable
itself to see if it got initialized.

Fixes: bae77c5e ("bpf: enable stackmap with build_id in nmi context")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

gcc warns about a noreturn function possibly returning in
some configurations:

kernel/bpf/btf.c: In function 'env_type_is_resolve_sink':
kernel/bpf/btf.c:729:1: error: control reaches end of non-void function [-Werror=return-type]

Using BUG() instead of BUG_ON() avoids that warning and otherwise
does the exact same thing.

Fixes: eb3f595d ("bpf: btf: Validate type reference")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

install_headers target should contain all headers that are part of
libbpf. Add missing btf.h
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Lots of easy overlapping changes in the confict
resolutions here.
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge misc fixes from Andrew Morton:
 "16 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kasan: fix memory hotplug during boot
  kasan: free allocated shadow memory on MEM_CANCEL_ONLINE
  checkpatch: fix macro argument precedence test
  init/main.c: include <linux/mem_encrypt.h>
  kernel/sys.c: fix potential Spectre v1 issue
  mm/memory_hotplug: fix leftover use of struct page during hotplug
  proc: fix smaps and meminfo alignment
  mm: do not warn on offline nodes unless the specific node is explicitly requested
  mm, memory_hotplug: make has_unmovable_pages more robust
  mm/kasan: don't vfree() nonexistent vm_area
  MAINTAINERS: change hugetlbfs maintainer and update files
  ipc/shm: fix shmat() nil address after round-down when remapping
  Revert "ipc/shm: Fix shmat mmap nil-page protection"
  idr: fix invalid ptr dereference on item delete
  ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio"
  mm: fix nr_rotate_swap leak in swapon() error case

Pull networking fixes from David Miller:
 "Let's begin the holiday weekend with some networking fixes:

   1) Whoops need to restrict cfg80211 wiphy names even more to 64
      bytes. From Eric Biggers.

   2) Fix flags being ignored when using kernel_connect() with SCTP,
      from Xin Long.

   3) Use after free in DCCP, from Alexey Kodanev.

   4) Need to check rhltable_init() return value in ipmr code, from Eric
      Dumazet.

   5) XDP handling fixes in virtio_net from Jason Wang.

   6) Missing RTA_TABLE in rtm_ipv4_policy[], from Roopa Prabhu.

   7) Need to use IRQ disabling spinlocks in mlx4_qp_lookup(), from Jack
      Morgenstein.

   8) Prevent out-of-bounds speculation using indexes in BPF, from
      Daniel Borkmann.

   9) Fix regression added by AF_PACKET link layer cure, from Willem de
      Bruijn.

  10) Correct ENIC dma mask, from Govindarajulu Varadarajan.

  11) Missing config options for PMTU tests, from Stefano Brivio"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
  ibmvnic: Fix partial success login retries
  selftests/net: Add missing config options for PMTU tests
  mlx4_core: allocate ICM memory in page size chunks
  enic: set DMA mask to 47 bit
  ppp: remove the PPPIOCDETACH ioctl
  ipv4: remove warning in ip_recv_error
  net : sched: cls_api: deal with egdev path only if needed
  vhost: synchronize IOTLB message with dev cleanup
  packet: fix reserve calculation
  net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
  net/mlx5e: When RXFCS is set, add FCS data into checksum calculation
  bpf: properly enforce index mask to prevent out-of-bounds speculation
  net/mlx4: Fix irq-unsafe spinlock usage
  net: phy: broadcom: Fix bcm_write_exp()
  net: phy: broadcom: Fix auxiliary control register reads
  net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy
  net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message
  ibmvnic: Only do H_EOI for mobility events
  tuntap: correctly set SOCKWQ_ASYNC_NOSPACE
  virtio-net: fix leaking page for gso packet during mergeable XDP
  ...

Using module_init() is wrong.  E.g.  ACPI adds and onlines memory before
our memory notifier gets registered.

This makes sure that ACPI memory detected during boot up will not result
in a kernel crash.

Easily reproducible with QEMU, just specify a DIMM when starting up.

Link: http://lkml.kernel.org/r/20180522100756.18478-3-david@redhat.com
Fixes: 786a8959 ("kasan: disable memory hotplug")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have to free memory again when we cancel onlining, otherwise a later
onlining attempt will fail.

Link: http://lkml.kernel.org/r/20180522100756.18478-2-david@redhat.com
Fixes: fa69b598 ("mm/kasan: add support for memory hotplug")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch's macro argument precedence test is broken so fix it.

Link: http://lkml.kernel.org/r/5dd900e9197febc1995604bb33c23c136d8b33ce.camel@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit c7753208 ("x86, swiotlb: Add memory encryption support") a
call to function `mem_encrypt_init' was added.  Include prototype
defined in header <linux/mem_encrypt.h> to prevent a warning reported
during compilation with W=1:

  init/main.c:494:20: warning: no previous prototype for `mem_encrypt_init' [-Wmissing-prototypes]

Link: http://lkml.kernel.org/r/20180522195533.31415-1-malat@debian.orgSigned-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Gargi Sharma <gs051095@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

`resource' can be controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

  kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)
  kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)

Fix this by sanitizing *resource* before using it to index
current->signal->rlim

Notice that given that speculation windows are large, the policy is to
kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.comSigned-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The case of a new numa node got missed in avoiding using the node info
from page_struct during hotplug.  In this path we have a call to
register_mem_sect_under_node (which allows us to specify it is hotplug
so don't change the node), via link_mem_sections which unfortunately
does not.

Fix is to pass check_nid through link_mem_sections as well and disable
it in the new numa node path.

Note the bug only 'sometimes' manifests depending on what happens to be
in the struct page structures - there are lots of them and it only needs
to match one of them.

The result of the bug is that (with a new memory only node) we never
successfully call register_mem_sect_under_node so don't get the memory
associated with the node in sysfs and meminfo for the node doesn't
report it.

It came up whilst testing some arm64 hotplug patches, but appears to be
universal.  Whilst I'm triggering it by removing then reinserting memory
to a node with no other elements (thus making the node disappear then
appear again), it appears it would happen on hotplugging memory where
there was none before and it doesn't seem to be related the arm64
patches.

These patches call __add_pages (where most of the issue was fixed by
Pavel's patch).  If there is a node at the time of the __add_pages call
then all is well as it calls register_mem_sect_under_node from there
with check_nid set to false.  Without a node that function returns
having not done the sysfs related stuff as there is no node to use.
This is expected but it is the resulting path that fails...

Exact path to the problem is as follows:

 mm/memory_hotplug.c: add_memory_resource()

   The node is not online so we enter the 'if (new_node)' twice, on the
   second such block there is a call to link_mem_sections which calls
   into

  drivers/node.c: link_mem_sections() which calls

  drivers/node.c: register_mem_sect_under_node() which calls
     get_nid_for_pfn and keeps trying until the output of that matches
     the expected node (passed all the way down from
     add_memory_resource)

It is effectively the same fix as the one referred to in the fixes tag
just in the code path for a new node where the comments point out we
have to rerun the link creation because it will have failed in
register_new_memory (as there was no node at the time).  (actually that
comment is wrong now as we don't have register_new_memory any more it
got renamed to hotplug_memory_register in Pavel's patch).

Link: http://lkml.kernel.org/r/20180504085311.1240-1-Jonathan.Cameron@huawei.com
Fixes: fc44f7f9 ("mm/memory_hotplug: don't read nid from struct page during hotplug")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The 4.17-rc /proc/meminfo and /proc/<pid>/smaps look ugly: single-digit
numbers (commonly 0) are misaligned.

Remove seq_put_decimal_ull_width()'s leftover optimization for single
digits: it's wrong now that num_to_str() takes care of the width.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805241554210.1326@eggly.anvils
Fixes: d1be35cb ("proc: add seq_put_decimal_ull_width to speed up /proc/pid/smaps")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>