- 07 Aug, 2018 13 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2018-08-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix gvt compilation broken on a silent conflict on fixes vs next merge - Fix runtime PM for LPE audio - Revert on ICL workaround - Interactive RPS mode - Fix for PSR sink status report Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180806233034.GA20655@intel.com
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2018-08-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next Fixes an oops on the DP CEC code and a memory leak on the vkms driver. Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Fixes for 4.19: - Fix UVD 7.2 instance handling - Fix UVD 7.2 harvesting - GPU scheduler fix for when a process is killed - TTM cleanups - amdgpu CS bo_list fixes - Powerplay fixes for polaris12 and CZ/ST - DC fixes for link training certain HMDs - DC fix for vega10 blank screen in certain cases From: Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
From: Lucas Stach <l.stach@pengutronix.de> "not much to de-stage this time. Changes from Philipp and Souptick to use memset32 more and switch the fault handler to the new vm_fault_t and two small fixes for issues that can be hit in rare corner cases from me." Signed-off-by:
-
git://git.armlinux.org.uk/~rmk/linux-armDave Airlie authored
From: Russell King <rmk@armlinux.org.uk> As per the patches posted, discussed and tested by Peter Rosin, this converts TDA998x to a bridge driver, while still allowing Armada and TI LCDC to continue using it as they always have done. It also gets rid of the private .fill_modes function, and tweaks the TMDS divider calculation to be more correct to the available information. [airlied: fixed two conflicts] Signed-off-by:
-
git://linux-arm.org/linux-ldDave Airlie authored
From: Liviu Dudau <Liviu.Dudau@arm.com> "I managed to loose track of a few patches for HDLCD while focusing on Mali DP and found them again when investigating an issue with the way HDLCD behaves on teardown. They can go into drm-next for one of the v4.19-rcX if you're not going to do another pull request before the merge window." Signed-off-by:
-
Russell King authored
The serializer PLL divider is a power-of-two divider, so our calculation which assumes that it's a numerical divider is incorrect. Replace it with one that results in a power-of-two divider value instead. Tested with all supported modes with a Samsung S24C750. Tested-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Russell King authored
We can achieve the same effect via the get_modes() method, rather than wrapping the fill_modes helper. Tested-by:
-
Russell King authored
Move the mode_valid() implementation to the bridge instead of the connector, as we're checking the bridge's capabilities. Tested-by:
-
Russell King authored
Register the bridge outside of the component helper as we have drivers that wish to use the tda998x without its encoder. Tested-by:
-
Russell King authored
Cleanup the code a little from the effects of the previous changes: - Move tda998x_destroy() to be above tda998x_create() - Use 'dev' directly in tda998x_create() where appropriate. Tested-by:
-
Russell King authored
Move the tda998x_priv allocation inside tda998x_create() and simplify the tda998x_create()'s arguments. Pass the same to tda998x_destroy(). Tested-by:
-
Russell King authored
Convert tda998x to a bridge driver with built-in encoder support for compatibility with existing component drivers. Tested-by:
-
- 06 Aug, 2018 9 commits
-
-
Michał Winiarski authored
gvt_pin_guest_page extracted some of the gvt_dma_map_page functionality: commit 79e542f5 ("drm/i915/kvmgt: Support setting dma map for huge pages") And yet, part of it was reintroduced in: commit 39b4cbad ("drm/i915/kvmgt: Check the pfn got from vfio_pin_pages") Causing kvmgt part to no longer build. Let's remove it. Reported-by:
Tomasz Lis <tomasz.lis@intel.com> Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Acked-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712155330.32055-1-michal.winiarski@intel.com (cherry picked from commit 4eaf317a) Signed-off-by:
-
Chris Wilson authored
The LPE audio is a child device of i915, it is powered up and down alongside the igfx and presents no independent runtime interface. This aptly fulfils the description of a "No-Callback" Device, so mark it thus. Fixes: 183c0035 ("drm/i915: Fix runtime PM for LPE audio") Testcase: igt/pm_rpm/basic-pci-d3-state Testcase: igt/pm_rpm/basic-rte Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180802140416.6062-1-chris@chris-wilson.co.uk (cherry picked from commit 46e831ab) Signed-off-by:
-
Mika Kuoppala authored
The register for 0xe420 is unable to hold any value, including this bit. The documentation is also mixed between having a register bit for toggle and having a state command setup for it. Apparently the register toggle is deprecated. Remove the register toggle as evidence shows it's futile. The thing remaining is an apology and humble request for Mesa folks to resurrect their state setup for this as they were on right track from start. This reverts commit 0bf059f3. Fixes: 0bf059f3 ("drm/i915/icl: WaEnableFloatBlendOptimization") References: HSDES#1406393558 Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Anuj Phogat <anuj.phogat@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by:
-
Chris Wilson authored
RPS provides a feedback loop where we use the load during the previous evaluation interval to decide whether to up or down clock the GPU frequency. Our responsiveness is split into 3 regimes, a high and low plateau with the intent to keep the gpu clocked high to cover occasional stalls under high load, and low despite occasional glitches under steady low load, and inbetween. However, we run into situations like kodi where we want to stay at low power (video decoding is done efficiently inside the fixed function HW and doesn't need high clocks even for high bitrate streams), but just occasionally the pipeline is more complex than a video decode and we need a smidgen of extra GPU power to present on time. In the high power regime, we sample at sub frame intervals with a bias to upclocking, and conversely at low power we sample over a few frames worth to provide what we consider to be the right levels of responsiveness respectively. At low power, we more or less expect to be kicked out to high power at the start of a busy sequence by waitboosting. Prior to commit e9af4ea2 ("drm/i915: Avoid waitboosting on the active request") whenever we missed the frame or stalled, we would immediate go full throttle and upclock the GPU to max. But in commit e9af4ea2, we relaxed the waitboosting to only apply if the pipeline was deep to avoid over-committing resources for a near miss. Sadly though, a near miss is still a miss, and perceptible as jitter in the frame delivery. To try and prevent the near miss before having to resort to boosting after the fact, we use the pageflip queue as an indication that we are in an "interactive" regime and so should sample the load more frequently to provide power before the frame misses it vblank. This will make us more favorable to providing a small power increase (one or two bins) as required rather than going all the way to maximum and then having to work back down again. (We still keep the waitboosting mechanism around just in case a dramatic change in system load requires urgent uplocking, faster than we can provide in a few evaluation intervals.) v2: Reduce rps_set_interactive to a boolean parameter to avoid the confusion of what if they wanted a new power mode after pinning to a different mode (which to choose?) v3: Only reprogram RPS while the GT is awake, it will be set when we wake the GT, and while off warns about being used outside of rpm. v4: Fix deferred application of interactive mode v5: s/state/interactive/ v6: Group the mutex with its principle in a substruct Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111 Fixes: e9af4ea2 ("drm/i915: Avoid waitboosting on the active request") Signed-off-by:
-
Rodrigo Vivi authored
First of all don't try to read dpcd if PSR is not even supported. But also, if read failed return -EIO instead of reporting via a backchannel. v2: fix dev_priv: At this level m->private is the connector. (CI/DK) don't convert dpcd read errors to EIO. (DK) Fixes: 5b7b3086 ("drm/i915/psr: Split sink status into a separate debugfs node") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180720003155.16290-1-rodrigo.vivi@intel.com (cherry picked from commit 7a72c78b) Signed-off-by:
-
Lucas Stach authored
When the suballocator was unable to provide a suitable buffer for the MMUv1 linear window, we roll back the GPU initialization. As the GPU is runtime resumed at that point we need to clear the kernel cmdbuf suballoc entry to properly skip any attempt to manipulate the cmdbuf when the GPU gets shut down in the runtime suspend later on. Signed-off-by:Lucas Stach <l.stach@pengutronix.de>
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref- commit 1c8f4220 ("mm: change return type to vm_fault_t") Previously vm_insert_page() returns err which driver mapped into VM_FAULT_* type. The new function vmf_insert_page() will replace this inefficiency by returning VM_FAULT_* type. vmf_error() is the newly introduce inline function in 4.17-rc6. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Lucas Stach authored
The documentation of drm_sched_job_init and drm_sched_entity_push_job has been clarified. Both functions should be called under a shared lock, to avoid jobs getting pushed into the scheduler queue in a different order than their sched_fence seqnos, which will confuse checks that are looking at the seqnos to infer information about completion order. Signed-off-by: -
Philipp Zabel authored
Replace the open-coded scratch page initialization loop with memset32 Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
- 02 Aug, 2018 3 commits
-
-
Russell King authored
Move the non-DT configuration of the TDA998x into tda998x_create() so that we do all setup in one place. Tested-by:
-
Peter Rosin authored
This fits better with the drm_bridge callbacks for when this driver becomes a drm_bridge. Suggested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Peter Rosin authored
This prepares for being a drm_bridge which will not register the encoder. That makes the connector the better choice. Reviewed-by:
-
- 01 Aug, 2018 3 commits
-
-
Huang Rui authored
All non-x86 definitions are moved to ttm_set_memory header, so remove it from ttm_tt.c. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Huang Rui authored
These two helpers will be used on set page caching. Reviewed-by:
-
Huang Rui authored
This patch fixed the error when do not configure CONFIG_X86, otherwise, below error will be encountered. All errors (new ones prefixed by >>): drivers/gpu/drm/ttm/ttm_page_alloc_dma.c: In function 'ttm_set_pages_caching': >> drivers/gpu/drm/ttm/ttm_page_alloc_dma.c:272:7: error: implicit declaration of function 'set_pages_array_uc'; did you mean +'ttm_set_pages_array_uc'? [-Werror=implicit-function-declaration] r = set_pages_array_uc(pages, cpages); ^~~~~~~~~~~~~~~~~~ ttm_set_pages_array_uc cc1: some warnings being treated as errors Reported-by:kbuild test robot <lkp@intel.com> Reviewed-by:
-
- 31 Jul, 2018 12 commits
-
-
git://git.armlinux.org.uk/~rmk/linux-armDave Airlie authored
This set of changes migrates Armada DRM from legacy modeset to atomic modeset. This is everything from the "Transition Armada DRM planes to atomic state" and "Finish Armada DRM transition to atomic modeset" patch sets as posted on drm-devel, excluding the "Finish Armada DRM DT support" series. These series did not evoke any comments - if there are any, these can be addressed via follow up patches. Developed and tested on Dove Cubox with xf86-video-armada including the overlay plane, and also tested with the tools in libdrm. Signed-off-by:
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
A bit larger this time around, due to introduction of "dpu1" support for the display controller in sdm845 and beyond. This has been on list and undergoing refactoring since Feb (going from ~110kloc to ~30kloc), and all my review complaints have been addressed, so I'd be happy to see this upstream so further feature work can procede on top of upstream. Also includes the gpu coredump support, which should be useful for debugging gpu crashes. And various other misc fixes and such. Signed-off-by:
-
Gustavo A. R. Silva authored
idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:408 amdgpu_set_pp_force_state() warn: potential spectre issue 'data.states' Fix this by sanitizing idx before using it to index data.states Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Colin Ian King authored
Add a missing void parameter to function dc_create_transfer_func, fixes sparse warning: warning: non-ANSI function declaration of function 'dc_create_transfer_func' Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Thomas Zimmermann authored
The function ttm_bo_put releases a reference to a TTM buffer object. The function's name is more aligned to the Linux kernel convention of naming ref-counting function _get and _put. A call to ttm_bo_unref takes the address of the TTM BO object's pointer and clears the pointer's value to NULL. This is not necessary in most cases and sometimes even worked around by the calling code. A call to ttm_bo_put only releases the reference without clearing the pointer. The current behaviour of cleaning the pointer is kept in the calling code, but should be removed if not required in a later patch. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Thomas Zimmermann authored
The function ttm_bo_get acquires a reference on a TTM buffer object. The function's name is more aligned to the Linux kernel convention of naming ref-counting function _get and _put. Signed-off-by:
-
Thomas Zimmermann authored
The function ttm_bo_put releases a reference to a TTM buffer object. The function's name is more aligned to the Linux kernel convention of naming ref-counting function _get and _put. A call to ttm_bo_unref takes the address of the TTM BO object's pointer and clears the pointer's value to NULL. This is not necessary in most cases and sometimes even worked around by the calling code. A call to ttm_bo_put only releases the reference without clearing the pointer. The current behaviour of cleaning the pointer is kept in the calling code, but should be removed if not required in a later patch. v2: * set prefix to drm/amdgpu Signed-off-by:
-
Thomas Zimmermann authored
The function ttm_bo_get acquires a reference on a TTM buffer object. The function's name is more aligned to the Linux kernel convention of naming ref-counting function _get and _put. v2: * changed prefix to drm/amdgpu Signed-off-by:
-
Christian König authored
We removed the redundancy of having an extra scheduler field, so we can't set the rq to NULL any more or otherwise won't know which scheduler to use for the cleanup. Just remove the entity from the scheduling list instead. Signed-off-by:
Nayan Deshmukh <nayan26deshmukh@gmail.com> Bug: https://bugs.freedesktop.org/show_bug.cgi?id=107367Signed-off-by:
-
Christian König authored
Note which task is using the entity and only kill it if the last user of the entity is killed. This should prevent problems when entities are leaked to child processes. v2: add missing kernel doc Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by:
-
Christian König authored
Instead of having extra handling just create an empty bo_list when no handle is provided. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
-
Christian König authored
This avoids multiple allocations for the head and the array. Signed-off-by:
-
