- 11 Oct, 2006 40 commits
-
-
Andrew Morton authored
A failure in invalidate_inode_pages2_range() can result in unpleasant things happening in NFS (at least). Stick a WARN_ON_ONCE() in there so we can find out if it happens, and maybe why. (akpm: might be a -mm-only patch, we'll see..) Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Steve Dickson <SteveD@redhat.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Nick Piggin authored
This likely profiling is pretty fun. I found a few possible problems in sched.c. This patch may be not measurable, but when I did measure long ago, nooping (un)likely cost a couple of % on scheduler heavy benchmarks, so it all adds up. Tweak some branch hints: - the 2nd 64 bits in the bitmask is likely to be populated, because it contains the first 28 bits (nearly 3/4) of the normal priorities. (ratio of 669669:691 ~= 1000:1). - it isn't unlikely that context switching switches to another process. it might be very rapidly switching to and from the idle process (ratio of 475815:419004 and 471330:423544). Let the branch predictor decide. - preempt_enable seems to be very often called in a nested preempt_disable or with interrupts disabled (ratio of 3567760:87965 ~= 40:1) Signed-off-by:
Nick Piggin <npiggin@suse.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: Daniel Walker <dwalker@mvista.com> Cc: Hua Zhong <hzhong@gmail.com> Signed-off-by:
-
Jeff Garzik authored
- handle sysfs error - handle driver model errors - de-obfuscate platform_device_register_simple() call, which included an assignment in between two function calls, in the same C statement. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Acked-by:
Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
-
Vasily Averin authored
Current error behaviour for ext2 and ext3 filesystems does not fully correspond to the documentation and should be fixed. According to man 8 mount, ext2 and ext3 file systems allow to set one of 3 different on-errors behaviours: ---- start of quote man 8 mount ---- errors=continue / errors=remount-ro / errors=panic Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default is set in the filesystem superblock, and can be changed using tune2fs(8). ---- end of quote ---- However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect handle of errors on ext3. Then we've checked corresponding code in ext2 and discovered that it is buggy as well: - EXT2_ERRORS_CONTINUE is not read from the superblock (the same); - parse_option() does not clean the alternative values and thus something like (ERRORS_CONT|ERRORS_RO) can be set; - if options are omitted, parse_option() does not set any of these options. Therefore it is possible to set any combination of these options on the ext2: - none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount options; - any of them may be set using mount options; - 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the superblock and other value in mount options; - and finally all three options may be set by adding third option in remount. Currently ext2 uses these values only in ext2_error() and it is not leading to any noticeable troubles. However somebody may be discouraged when he will try to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in mount options. This patch: EXT2_ERRORS_CONTINUE should be read from the superblock as default value for error behaviour. parse_option() should clean the alternative options and should not change default value taken from the superblock. Signed-off-by:Vasily Averin <vvs@sw.ru> Acked-by:
Kirill Korotaev <dev@openvz.org> Signed-off-by:
-
Dmitry Mishin authored
Current error behaviour for ext2 and ext3 filesystems does not fully correspond to the documentation and should be fixed. According to man 8 mount, ext2 and ext3 file systems allow to set one of 3 different on-errors behaviours: ---- start of quote man 8 mount ---- errors=continue / errors=remount-ro / errors=panic Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default is set in the filesystem superblock, and can be changed using tune2fs(8). ---- end of quote ---- However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect handle of errors on ext3. Then we've checked corresponding code in ext2 and discovered that it is buggy as well: - EXT2_ERRORS_CONTINUE is not read from the superblock (the same); - parse_option() does not clean the alternative values and thus something like (ERRORS_CONT|ERRORS_RO) can be set; - if options are omitted, parse_option() does not set any of these options. Therefore it is possible to set any combination of these options on the ext2: - none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount options; - any of them may be set using mount options; - 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the superblock and other value in mount options; - and finally all three options may be set by adding third option in remount. Currently ext2 uses these values only in ext2_error() and it is not leading to any noticeable troubles. However somebody may be discouraged when he will try to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in mount options. This patch: EXT3_ERRORS_CONTINUE should be taken from the superblock as default value for error behaviour. Signed-off-by:Dmitry Mishin <dim@openvz.org> Acked-by:
-
Florin Malita authored
Module taint flags listing in Oops/panic has a couple of issues: * taint_flags() doesn't null-terminate the buffer after printing the flags * per-module taints are only set if the kernel is not already tainted (with that particular flag) => only the first offending module gets its taint info correctly updated Some additional changes: * 'license_gplok' is no longer needed - equivalent to !(taints & TAINT_PROPRIETARY_MODULE) - so we can drop it from struct module * exporting module taint info via /proc/module: pwc 88576 0 - Live 0xf8c32000 evilmod 6784 1 pwc, Live 0xf8bbf000 (PF) Signed-off-by:
Florin Malita <fmalita@gmail.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Alan Cox authored
Some people find their Jmicron pata port reports its disabled even though it has devices on it and was boot probed. Fix this (Candidate for 2.6.18.*, less so for 2.6.19 as we've got a proper jmicron driver on the merge for that to replace ide-generic support) Cc: <stable@kernel.org> Signed-off-by:
-
Andrew Morton authored
If grow_buffers() is for some reason passed a block number which wants to lie outside the maximum-addressable pagecache range (PAGE_SIZE * 4G bytes) then it will accidentally truncate `index' and will then instnatiate a page at the wrong pagecache offset. This causes __getblk_slow() to go into an infinite loop. This can happen with corrupted disks, or with software errors elsewhere. Detect that, and handle it. Signed-off-by:
-
Stephane Eranian authored
This is a follow-up patch based on the review for perfmon2. This patch adds the carta_random32() library routine + carta_random32.h header file. This is fast, simple, and efficient pseudo number generator algorithm. We use it in perfmon2 to randomize the sampling periods. In this context, we do not need any fancy randomizer. Signed-off-by:
stephane eranian <eranian@hpl.hp.com> Cc: David Mosberger <david.mosberger@acm.org> Signed-off-by:
-
Davide Libenzi authored
Implement the epoll_pwait system call, that extend the event wait mechanism with the same logic ppoll and pselect do. The definition of epoll_pwait is: int epoll_pwait(int epfd, struct epoll_event *events, int maxevents, int timeout, const sigset_t *sigmask, size_t sigsetsize); The difference between the vanilla epoll_wait and epoll_pwait is that the latter allows the caller to specify a signal mask to be set while waiting for events. Hence epoll_pwait will wait until either one monitored event, or an unmasked signal happen. If sigmask is NULL, the epoll_pwait system call will act exactly like epoll_wait. For the POSIX definition of pselect, information is available here: http://www.opengroup.org/onlinepubs/009695399/functions/select.htmlSigned-off-by:Davide Libenzi <davidel@xmailserver.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andi Kleen <ak@muc.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
David Woodhouse authored
In order to encourage people to notice when they break the exported headers, add a config option which automatically runs the sanity checks when building vmlinux. That way, those who use allyesconfig will notice failures. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Now that various memory splits are enabled, add a config option allowing the user to compile UML for its need - HOST_2G_2G allowed to choose either 3G/1G or 2G/2G, and enabling it reduced the usable virtual memory. Detecting this at run time should be implemented in the future, but we must make the stop-gap measure work well enough (this is valid in _many_ cases). Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Deprecate TT mode in Kconfig so that users won't select it, update the MODE_SKAS description (it was largely obsolete and misleadin) and btw describe advantages for high memory usage with CONFIG_STATIC_LINK. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
The export is together with the definition, in arch/x86_64/lib/csum-partial.c, which is compiled in by arch/um/sys-x86_64/Makefile. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Unify macros common to x86 and x86_64 kernel-offsets.h files. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Enable compilation of x86_64 crypto code;, and add the needed constant to make the code compile again (that macro was added to i386 asm-offsets between 2.6.17 and 2.6.18, in 6c2bb98b). Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Declare UML partial support for LOCKDEP - however IRQFLAGS tracing requires some coding which nobody did yet, so we cannot run full lockdep on UML. Grep for CONFIG_TRACE_IRQFLAGS on i386 code to find their implementation. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
On a 64bit Uml, if run under "setarch i386" (which a user did), uname() currently returns the obtained i686 as machine - fix that. Btw, I'm quite surprised that under setarch i386 a 64-bit binary can run. Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Makes UML compile on any possible processor choice. The two problems were: *) x86 code, when 386 is selected, checks at runtime boot_cpuflags, which we do not have. *) 3Dnow support for memcpy() et al. does not compile currently and fixing this is not trivial, so simply disable it; with this change, if one selects MK7 UML compiles (while it did not). Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
If enable is moved by GCC in a register its value may not be preserved after coming back there with longjmp(). So, mark it as volatile to prevent this; this is suggested (it seems) in info gcc, when it talks about -Wuninitialized. I re-read this and it seems to say something different, but I still believe this may be needed. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Make TT mode compile after the introduction of klibc's implementation of setjmp. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
This was forgot in a previous patch so UML does not compile with TT mode enabled. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Correct commit 5906e417 - this makes more sense: we turn pte_mkexec + pte_wrprotect to pte_mkread. However, due to a bug in pte_mkread, it does the exact same thing as pte_mkwrite, so this patch improves the code but does not change anything in practice. The pte_mkread bug is fixed separately, as it may have big impact. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Andi Kleen pointed out that -mcmodel=kernel does not make sense for userspace code and would stop everything from working, and pointed out the correct fix for the original bug (not easy to do for me). Reverts part of commit 06837504. Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Nick Piggin authored
Move the lock debug checks below the page reserved checks. Also, having debug_check_no_locks_freed in kernel_map_pages is wrong. Signed-off-by:
-
Nick Piggin authored
After the PG_reserved check was added, arch_free_page was being called in the wrong place (it could be called for a page we don't actually want to free). Fix that. Signed-off-by:
-
Keith Owens authored
With CONFIG_MIGRATION=n mm/mempolicy.c: In function 'do_mbind': mm/mempolicy.c:796: warning: passing argument 2 of 'migrate_pages' from incompatible pointer type Signed-off-by:
Keith Owens <kaos@ocs.com.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
-
Dave Jones authored
We have a persistent dribble of reports of this BUG triggering. Its extended diagnostics were recently made conditional on CONFIG_DEBUG_VM, which was a bad idea - we want to know about it. Signed-off-by:
Dave Jones <davej@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Christoph Lameter authored
Switch the memory policy of the kevent threads to MPOL_DEFAULT while leaving the kzalloc of the workqueue structure on interleave. This means that all code executed in the context of the kevent thread is allocating node local. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Alok Kataria <alok.kataria@calsoftinc.com> Cc: Andi Kleen <ak@suse.de> Cc: <pj@sgi.com> Cc: <shai@scalex86.org> Signed-off-by:
-
Dave Kleikamp authored
This file, ext4.txt, was put together with information from Andrew Morton, Andreas Dilger, Suparna Bhattacharya, and Ted Ts'o. I copied the mount options, with the exception of "extents", from ext3.txt, so if anyone is aware of anything out-of-date, please let me know. Signed-off-by:
Dave Kleikamp <shaggy@austin.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Suparna Bhattacharya <suparna@in.ibm.com> Signed-off-by:
-
Andrew Morton authored
Someone's tab key is emitting spaces. Attempt to repair some of the damage. Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Dmitry Mishin authored
Current error behaviour for ext2 and ext3 filesystems does not fully correspond to the documentation and should be fixed. According to man 8 mount, ext2 and ext3 file systems allow to set one of 3 different on-errors behaviours: ---- start of quote man 8 mount ---- errors=continue / errors=remount-ro / errors=panic Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default is set in the filesystem superblock, and can be changed using tune2fs(8). ---- end of quote ---- However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect handle of errors on ext3. Then we've checked corresponding code in ext2 and discovered that it is buggy as well: - EXT2_ERRORS_CONTINUE is not read from the superblock (the same); - parse_option() does not clean the alternative values and thus something like (ERRORS_CONT|ERRORS_RO) can be set; - if options are omitted, parse_option() does not set any of these options. Therefore it is possible to set any combination of these options on the ext2: - none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount options; - any of them may be set using mount options; - 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the superblock and other value in mount options; - and finally all three options may be set by adding third option in remount. Currently ext2 uses these values only in ext2_error() and it is not leading to any noticeable troubles. However somebody may be discouraged when he will try to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in mount options. This patch: EXT4_ERRORS_CONTINUE should be taken from the superblock as default value for error behaviour. Signed-off-by: -
Andrew Morton authored
I assume this means "logical sb block". So call it that. I still don't understand the name though. A block is a block. What's different about this one? Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Andrew Morton authored
With CONFIG_LBD=n, sector_div() expands to a plain old divide. But ext4 is _not_ passing in a sector_t as the first argument, so... fs/built-in.o: In function `ext4_get_group_no_and_offset': fs/ext4/balloc.c:39: undefined reference to `__umoddi3' fs/ext4/balloc.c:41: undefined reference to `__udivdi3' fs/built-in.o: In function `find_group_orlov': fs/ext4/ialloc.c:278: undefined reference to `__udivdi3' fs/built-in.o: In function `ext4_fill_super': fs/ext4/super.c:1488: undefined reference to `__udivdi3' fs/ext4/super.c:1488: undefined reference to `__umoddi3' fs/ext4/super.c:1594: undefined reference to `__udivdi3' fs/ext4/super.c:1601: undefined reference to `__umoddi3' Fix that up by calling do_div() directly. Also cast the arg to u64. do_div() is only defined on u64, and ext4_fsblk_t is supposed to be opaque. Note especially the changes to find_group_orlov(). It was attempting to do do_div(int, unsigned long long); which is royally screwed up. Switched it to plain old divide. Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Andrew Morton authored
Way too big to inline. Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Alexandre Ratchov authored
move '_hi' bits of block numbers in the larger part of the block group descriptor structure Signed-off-by:
Alexandre Ratchov <alexandre.ratchov@bull.net> Signed-off-by:
-
Alexandre Ratchov authored
make block group descriptor larger. Signed-off-by:
-
Mingming Cao authored
Similar to ext4, change blocks in JBD2 from sector_t to unsigned long long. Signed-off-by:
Mingming Cao <cmm@us.ibm.com> Signed-off-by:
-
Mingming Cao authored
Previously when in-kernel ext4 block type is sector_t, it's only 4 bits long under some 32bit arch (when CONFIG_LBD is not on). So we need to check the size of sector_t before we read 48bit long on-disk blocks to in-kernel blocks. These checks are unnecessary now as we changed the in-kernel blocks to unsigned longlong. Signed-off-by:
-
Mingming Cao authored
Change ext4 in-kernel block type (ext4_fsblk_t) from sector_t to unsigned long long. Remove ext4 block type string micro E3FSBLK, replaced with "%llu" [akpm@osdl.org: build fix] Signed-off-by:
-
