- 18 Apr, 2017 40 commits
-
-
Qu Wenruo authored
[BUG] The easist way to reproduce the bug is: ------ # mkfs.btrfs -f $dev -n 16K # mount $dev $mnt -o inode_cache # btrfs quota enable $mnt # btrfs quota rescan -w $mnt # btrfs qgroup show $mnt qgroupid rfer excl -------- ---- ---- 0/5 32.00KiB 32.00KiB ^^ Twice the correct value ------ And fstests/btrfs qgroup test group can easily detect them with inode_cache mount option. Although some of them are false alerts since old test cases are using fixed golden output. While new test cases will use "btrfs check" to detect qgroup mismatch. [CAUSE] Inode_cache mount option will make commit_fs_roots() to call btrfs_save_ino_cache() to update fs/subvol trees, and generate new delayed refs. However we call btrfs_qgroup_prepare_account_extents() too early, before commit_fs_roots(). This makes the "old_roots" for newly generated extents are always NULL. For freeing extent case, this makes both new_roots and old_roots to be empty, while correct old_roots should not be empty. This causing qgroup numbers not decreased correctly. [FIX] Modify the timing of calling btrfs_qgroup_prepare_account_extents() to just before btrfs_qgroup_account_extents(), and add needed delayed_refs handler. So qgroup can handle inode_map mount options correctly. Signed-off-by:Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Anand Jain authored
We have already assigned q from bdev_get_queue() so use it. And rearrange the code for better view. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Liu Bo authored
This is fixing code pieces where we use div_u64 when passing a u64 divisor. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
-
Liu Bo authored
Commit 3d8da678 ("Btrfs: fix divide error upon chunk's stripe_len") changed stripe_len in struct map_lookup to u64, but didn't update stripe_len in struct scrub_parity. This updates the type and switches to div64_u64_rem to match u64 divisor. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Liu Bo authored
Now that scrub can fix data errors with the help of parity for raid56 profile, repair during read is able to as well. Although the mirror num in raid56 scenario has different meanings, i.e. 0 or 1: read data directly > 1: do recover with parity, it could be fit into how we repair bad block during read. The trick is to use BTRFS_MAP_READ instead of BTRFS_MAP_WRITE to get the device and position on it. Cc: David Sterba <dsterba@suse.cz> Tested-by:
-
David Sterba authored
There's a helper to clear whole page, with a arch-specific optimized code. The replaced cases do not seem to be in performace critical code, but we still might get some percent gain. Signed-off-by: -
Qu Wenruo authored
scrub_setup_recheck_block() calls btrfs_map_sblock() and then accesses bbio without protection of bio_counter. This can lead to use-after-free if racing with dev replace cancel. Fix it by increasing bio_counter before calling btrfs_map_sblock() and decreasing the bio_counter when corresponding recover is finished. Cc: Liu Bo <bo.li.liu@oracle.com> Reported-by:
-
Qu Wenruo authored
When raid56 dev-replace is cancelled by running scrub, we will free target device without waiting for in-flight bios, causing the following NULL pointer deference or general protection failure. BUG: unable to handle kernel NULL pointer dereference at 00000000000005e0 IP: generic_make_request_checks+0x4d/0x610 CPU: 1 PID: 11676 Comm: kworker/u4:14 Tainted: G O 4.11.0-rc2 #72 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 Workqueue: btrfs-endio-raid56 btrfs_endio_raid56_helper [btrfs] task: ffff88002875b4c0 task.stack: ffffc90001334000 RIP: 0010:generic_make_request_checks+0x4d/0x610 Call Trace: ? generic_make_request+0xc7/0x360 generic_make_request+0x24/0x360 ? generic_make_request+0xc7/0x360 submit_bio+0x64/0x120 ? page_in_rbio+0x4d/0x80 [btrfs] ? rbio_orig_end_io+0x80/0x80 [btrfs] finish_rmw+0x3f4/0x540 [btrfs] validate_rbio_for_rmw+0x36/0x40 [btrfs] raid_rmw_end_io+0x7a/0x90 [btrfs] bio_endio+0x56/0x60 end_workqueue_fn+0x3c/0x40 [btrfs] btrfs_scrubparity_helper+0xef/0x620 [btrfs] btrfs_endio_raid56_helper+0xe/0x10 [btrfs] process_one_work+0x2af/0x720 ? process_one_work+0x22b/0x720 worker_thread+0x4b/0x4f0 kthread+0x10f/0x150 ? process_one_work+0x720/0x720 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x2e/0x40 RIP: generic_make_request_checks+0x4d/0x610 RSP: ffffc90001337bb8 In btrfs_dev_replace_finishing(), we will call btrfs_rm_dev_replace_blocked() to wait bios before destroying the target device when scrub is finished normally. However when dev-replace is aborted, either due to error or cancelled by scrub, we didn't wait for bios, this can lead to use-after-free if there are bios holding the target device. Furthermore, for raid56 scrub, at least 2 places are calling btrfs_map_sblock() without protection of bio_counter, leading to the problem. This patch fixes the problem: 1) Wait for bio_counter before freeing target device when canceling replace 2) When calling btrfs_map_sblock() for raid56, use bio_counter to protect the call. Cc: Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Qu Wenruo authored
In the following situation, scrub will calculate wrong parity to overwrite the correct one: RAID5 full stripe: Before | Dev 1 | Dev 2 | Dev 3 | | Data stripe 1 | Data stripe 2 | Parity Stripe | --------------------------------------------------- 0 | 0x0000 (Bad) | 0xcdcd | 0x0000 | --------------------------------------------------- 4K | 0xcdcd | 0xcdcd | 0x0000 | ... | 0xcdcd | 0xcdcd | 0x0000 | --------------------------------------------------- 64K After scrubbing dev3 only: | Dev 1 | Dev 2 | Dev 3 | | Data stripe 1 | Data stripe 2 | Parity Stripe | --------------------------------------------------- 0 | 0xcdcd (Good) | 0xcdcd | 0xcdcd (Bad) | --------------------------------------------------- 4K | 0xcdcd | 0xcdcd | 0x0000 | ... | 0xcdcd | 0xcdcd | 0x0000 | --------------------------------------------------- 64K The reason is that after raid56 read rebuild rbio->stripe_pages are all correctly recovered (0xcd for data stripes). However when we check and repair parity in scrub_parity_check_and_repair(), we will append pages in sparity->spages list to rbio->bio_pages[], which contains old on-disk data. And when we submit parity data to disk, we calculate parity using rbio->bio_pages[] first, if rbio->bio_pages[] not found, then fallback to rbio->stripe_pages[]. The patch fix it by not appending pages from sparity->spages. So finish_parity_scrub() will use rbio->stripe_pages[] which is correct. Signed-off-by:
-
Qu Wenruo authored
Newly introduced qgroup reserved space trace points are normally nested into several common qgroup operations. While some other trace points are not well placed to co-operate with them, causing confusing output. This patch re-arrange trace_btrfs_qgroup_release_data() and trace_btrfs_qgroup_free_delayed_ref() trace points so they are triggered before reserved space ones. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Qu Wenruo authored
Introduce the following trace points: qgroup_update_reserve qgroup_meta_reserve These trace points are handy to trace qgroup reserve space related problems. Also export btrfs_qgroup structure, as now we directly pass btrfs_qgroup structure to trace points, so that structure needs to be exported. Signed-off-by:
-
David Sterba authored
All callers pass 0 for mirror_num and 1 for need_raid_map. Signed-off-by: -
David Sterba authored
All (1) callers pass the same value. Signed-off-by: -
David Sterba authored
All (1) callers pass the same value. Signed-off-by: -
Liu Bo authored
In raid56 scenario, after trying parity recovery, we didn't set mirror_num for btrfs_bio with failed mirror_num, hence end_bio_extent_readpage() will report a random mirror_num in dmesg log. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Liu Bo authored
Scrub repairs data by the unit called scrub_block, which may contain several pages. Scrub always tries to look up a good copy of a whole block, but if there's no such copy, it tries to do repair page by page. If we don't set page's io_error when checking this bad copy, in the last step, we may skip this page when repairing bad copy from good copy. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
David Sterba authored
There are several operations, usually started from ioctls, that cannot run concurrently. The status is tracked in mutually_exclusive_operation_running as an atomic_t. We can easily track the status as one of the per-filesystem flag bits with same synchronization guarantees. The conversion replaces: * atomic_xchg(..., 1) -> test_and_set_bit(FLAG, ...) * atomic_set(..., 0) -> clear_bit(FLAG, ...) Reviewed-by:
-
Goldwyn Rodrigues authored
We are facing the same problem with EDQUOT which was experienced with ENOSPC. Not sure if we require a full ticketing system such as ENOSPC, but here is a quick fix, which may be too big a hammer. Quotas are reserved during the start of an operation, incrementing qg->reserved. However, it is written to disk in a commit_transaction which could take as long as commit_interval. In the meantime there could be deletions which are not accounted for because deletions are accounted for only while committed (free_refroot). So, when we get a EDQUOT flush the data to disk and try again. This fixes fstests btrfs/139. Here is a sample script which shows this issue. DEVICE=/dev/vdb MOUNTPOINT=/mnt TESTVOL=$MOUNTPOINT/tmp QUOTA=5 PROG=btrfs DD_BS="4k" DD_COUNT="256" RUN_TIMES=5000 mkfs.btrfs -f $DEVICE mount -o commit=240 $DEVICE $MOUNTPOINT $PROG subvolume create $TESTVOL $PROG quota enable $TESTVOL $PROG qgroup limit ${QUOTA}G $TESTVOL typeset -i DD_RUN_GOOD typeset -i QUOTA function _check_cmd() { if [[ ${?} > 0 ]]; then echo -n "$(date) E: Running previous command" echo ${*} echo "Without sync" $PROG qgroup show -pcreFf ${TESTVOL} echo "With sync" $PROG qgroup show -pcreFf --sync ${TESTVOL} exit 1 fi } while true; do DD_RUN_GOOD=$RUN_TIMES while (( ${DD_RUN_GOOD} != 0 )); do dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT} _check_cmd "dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}" DD_RUN_GOOD=(${DD_RUN_GOOD}-1) done $PROG qgroup show -pcref $TESTVOL echo "----------- Cleanup ---------- " rm $TESTVOL/quotatest* done Signed-off-by:Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
-
Edmund Nadolski authored
Define the SEQ_LAST macro to replace (u64)-1 in places where said value triggers a special-case ref search behavior. Signed-off-by:
Edmund Nadolski <enadolski@suse.com> Reviewed-by:
-
Edmund Nadolski authored
Replace hardcoded numeric values for __merge_refs 'mode' argument with descriptive constants. Signed-off-by:
-
David Sterba authored
The members have been effectively unused since "Btrfs: rework qgroup accounting" (fcebe456), there's no substitute for assert_qgroups_uptodate so it's removed as well. Reviewed-by:
-
David Sterba authored
The name is misleading and the local variable serves no purpose. Reviewed-by:
-
David Sterba authored
We can read fs_info from dev. Reviewed-by:
-
David Sterba authored
We can read fs_info from dev. Reviewed-by:
-
David Sterba authored
We can read fs_info from eb. Reviewed-by:
-
David Sterba authored
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the global radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, because readahead is optional and not on any critical writeout path. Reviewed-by:
-
David Sterba authored
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the per-device radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, same as an allocation above anyway, but also because readahead is optional and not on any critical writeout path. Reviewed-by:
-
Hans van Kranenburg authored
The btrfs_balance_args are only used for the balance ioctl, so use __u instead of __le here for consistency. The __le usage was introduced in bc309467 and dee32d0a and was probably a result of copy/pasting when the code was written. The usage of __le did not break anything, but it's unnecessary. Also, this change makes the code less confusing for the careful reader. Signed-off-by:
Hans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by:
-
Goldwyn Rodrigues authored
Code cleanup. The code block is for !(*flags & MS_RDONLY). We don't need to check it again. Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Liu Bo authored
We also don't bother to flush free space cache while with free space tree. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Liu Bo authored
These two BUG_ON()s would never be true, ensured by callers' logic. Reviewed-by:
-
Liu Bo authored
This adds a helper to show directly whether ops require full stripe. Reviewed-by:
-
Liu Bo authored
With this, we can avoid allocating memory for dev replace copies if the target dev is not available. Reviewed-by:
-
Liu Bo authored
Since this part is mostly independent, this moves it to a separate function. Reviewed-by:
-
Liu Bo authored
As the part of getting extra mirror in __btrfs_map_block is independent, this puts it into a separate function. Reviewed-by:
-
Liu Bo authored
Since DISCARD is not as important as an operation like write, we don't copy it to target device during replace, and it makes __btrfs_map_block less complex. Signed-off-by:
-
Liu Bo authored
We have similar code here and there, this merges them into a helper. Signed-off-by:
-
Liu Bo authored
While debugging truncate problems, I found that these tracepoints could help us quickly know what went wrong. Two sets of tracepoints are created to track regular/prealloc file item and inline file item respectively, I put inline as a separate one since what inline file items cares about are way less than the regular one. This adds four tracepoints: - btrfs_get_extent_show_fi_regular - btrfs_get_extent_show_fi_inline - btrfs_truncate_show_fi_regular - btrfs_truncate_show_fi_inline Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David Windsor <dwindsor@gmail.com> Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
